One student runs with a velocity of +10 m/s while a second student runs with a velocity of –10 m/s. Which student has the faster velocity? Why?

Answers

Answer 1

Answer:

The one with the faster velocity is the one with a velocity of -10m/s


Related Questions

Help plz!:( it’s for physics but it has like math !!
(SHOW ALL WORK)

1) A 30-kg object is accelerated at a rate of 3m/s2. how much force does the object have?

2)A ball is thrown w/ a force of 50N and travels 4m. how much work is done to the ball?

3) Joey pushes on a door that is stuck with 400 N of force but is unable to move it. How much work has he done?

4) A toy car does 300j of work in 15 sec. how much power did the car use?

5)A 60w light bulb burns for 2 min. how much work was done?

6) how much power is used if it takes Frank (a 450 N boy) 3 sec to run 2 meters?

Answers

Answer:

1. 90N

2. 200N

3. 400N

4.20w

5.7200N

Explanation:

1.F=ma

30 * 3 = 90

2.W=FD

50 * 4=200

4. P=W/t

300/15=20

5.W= Pt. 2minutes = 120sec

60*120 = 7200

The speed of a car is decreasing from 35 m/s to 15 m/s in 4s

Answers

If you are looking for the acceleration
a = -20/4 = -5 m/s^2

Which material could be represented by the image above? (SC.8.P.8.1)
A. Diamonds
B. Milk
C. Oxygen
D. Wood

Answers

Answer:

a. diamonds

Explanation:

solid is the matter that has definite shape and definite volume. One good example is a diamond because contains particles that are strongly attract to each other.

A ray is incident at at 50 degrees angle on a plane mirror. What will be the deviation after reflection from the mirror?​

Answers

Answer:

Explanation:

If the ray were not deviated, it would travel straight through the mirror. Due to the mirror, the incident ray is reflected at 30°. The ray travels 30° + 30° = 60°. The angle of deviation is 180° - 60° = 120°.

what happens to the temperature of water as time elapses? IF YOU ANSWER IT I WILL MARK YOU A BRAINLEST ANSWER​

Answers

Answer:

I think it will get colder

Explanation:

Answer:

The water molecules go faster as it gets colder they go slower

Explanation:

trust me thats the answer

A child and sled with a combined mass of 53.9 kg slide down a frictionless slope. If the sled starts from rest and has a speed of 5.71 m/s at the bottom, what is the height of the hill

Answers

Answer:

1.66m

Explanation:

Using the conservation law

PE = KE

mgh = 1/2mv²

gh = V²/2

g is the acceleration due to gravity = 9.81m/s²

h is the height of the hill

V is the velocity = 5.71m/s

Substitute

9.81h = 5.71²/2

Cross multiply

2×9.81h = 5.71²

19.62h = 32.6041

h = 32.6041/19.62

h = 1.66m

Hence the height of the hill is 1.66m

Determine the Northward and the Eastward components of a 75 m long displacement vector which points in a direction of 27^o E of N.

Answers

Answer:

Eastward = 34.05m

Northward = 66.8m

Explanation:

First, let's define our coordinate axis.

I will choose the North as the positive y-axis and the East as the positive x-axis.

Now we will work with polar coordinates, r and θ and remember that if we want to recover the rectangular coordinates, we need to compute:

x = r*cos(θ)

y = r*sin(θ)

(remember that θ is measured counterclockwise from the positive x-axis)

Now we have:

"... 75 m long displacement vector..."

r = 75m

"...points in a direction of 27° E of N..."

This means that the measure is from the positive y-axis, clockwise (so this is not equivalent to θ).

Now, remember that the angle between the positive y-axis and the positive x-axis is 90°.

Then we will have that θ is the complementary angle to 27°, or:

θ = 90° - 27° = 63°

Now we have θ and r, then we can calculate the rectangular components:

x = 75m*cos(63°) = 34.05m (this is the Eastward component)

y = 75m*sin(63°) = 66.8m (this is the Northward component)

What is the volume of an object if it has a mass of 10 grams and a density of 87 g/ml

Answers

Answer:

The answer is 0.115 mL

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\[/tex]

From the question

mass = 10 g

density = 87 g/ml

We have

[tex]volume = \frac{10}{87} \\ = 0.114942528...[/tex]

We have the final answer as

0.115 mL

Hope this helps you

I need to write 200 words about: boys are most influenced by their fathers and girls are most influenced by their mothers. Do you agree or disagree?

Answers

Answer:

I agree

Explanation:

I agree because most of the times girls pass more time with their mom since they hace more things in common, it’s the same with the boys.

Consider a particle of mass m which can move freely along the x axis from -a/2 to a/2, but which is strictly prohibited from being found outside this region. The wave function of the particle within the allowed region is

Answers

Answer:

  φ = B sin (2π n/a   x)

Explanation:

In quantum mechanics when a particle moves freely it implies that the potential is zero (V = 0), so its wave function is

     φ = A cos kx + B sin kx

we must place the boundary conditions to determine the value of the constants A and B.

In our case we are told that the particle cannot be outside the boundary given by x = ± a / 2

therefore we must make the cosine part zero, for this the constant A = 0, the wave function remains

    φ = B sin kx

the wave vector is

      k = 2π /λ

now let's adjust the period, in the border fi = 0 therefore the sine function must be zero

         φ (a /2) = 0

          0 = A sin (2π/λ  a/2)

therefore the sine argument is

          2π /λ   a/2 = n π

          λ= a / n

we substitute

          φ = B sin (2π n/a   x)

1. Which statement is true of culture?
O Culture do not change or evolve
O Culture refers to the degree in which resources are used to address for problems.
O Culture has little affect on a persons life
Food can reflect culture

Answers

I think it is either A or B. I’m mostly leaning towards B.

As the ball falls, how will the kinetic energy change? How will the gravitational potential energy change? How will the mechanical energy change?

Answers

Answer:

the Kinetic energy of the ball also increases.

the potential energy of the ball also increases.

mechanical energy of ball remains same.

Explanation:

KINETIC ENERGY:

The kinetic energy of the object depends upon the velocity of the object. As the formula suggests:

K.E = (1/2)mv²

As, the ball is falling down, it accelerates with a value equal to acceleration due to gravity. Thus, the speed increases as the ball falls.

Therefore, the Kinetic energy of the ball also increases.

POTENTIAL ENERGY:

Th potential energy of an object depends upon its height. As, the formula suggests:

P.E = mgh

As, the ball falls, its height decreases.

Therefore, the potential energy of the ball also increases.

MECHANICAL ENERGY:

Mechanical energy is the sum of kinetic energy and potential energy. According to law of conservation of energy, the total energy of the system always remains constant. It may change the forms but the total energy remains same. Thus, in this case potential energy is converted to kinetic energy.

Therefore, mechanical energy of ball remains same.

An airplane flies with a constant speed of 600 km/h. to the west. How far can it travel in 1/4 hour?

Answers

Answer:

d = 150 km

Explanation:

Speed of an airplane is 600 km/h

We need to find how far it travel in 1/4 hour.

We know that the speed of an object is given by distance travelled divided by the time taken. Let d is the distance covered in 1/4 hour. So,

[tex]v=\dfrac{d}{t}\\\\d=v\times t\\\\d=600\ km/h \times \dfrac{1}{4}\ h\\\\d=150\ km[/tex]

So, it will cover 150 km.

An empty 50-g bowl rests on a scale that measures force (in newtons). Water is then poured into the scale from a height of 0.50 m and rate of 10 mL/s. Assuming that the water does not splash as it comes to rest, calculate the reading on the scale at t = 5.0 s

Answers

Answer:

1 Newton

Explanation:

Mass of bowl (Mb) = 50 g = 0.05 kg

Initial Velocity (Vo) = 10 mL/s = 10g/s

time (t) = 5.0s

Mass of water (Mw) = 10 g/s * 5s = 50 g = 0.05 kg

*Vob = initial velocity of bowl

*Vow = initial velocity of water

*Vf = final velocity

*g = gravity = 9.8

Conservation of momentum [Inelastic Collision]:

(m1)(Vo1) + (m2)(Vo2) = (M1+M2)Vf(Mw)(Vow) +  (Mb)(Vob) = (Mw+Mb)Vf(50g)(10g/s) + (50g)(0) = (50g + 50g)(Vf)Vf = 500/100 = 5g/s = 0.005kg/s

Impulse-Momentum Theorem:

Δp = mΔv

Scale Reading:

Δp + Mw(g) + Mb(g)= (0.05kg + 0.05kg)*(0.05kg/s) + (0.05kg*9.8) +(0.05kg*9.8)= 0.9805 = 1 Newton

Pleeeease Help!!
How did the parallel circuit respond differently to these changes than a series circuit?
Adding Bulbs: __________
Removing Bulbs: ________

Answers

Answer:

adding bulbs:bulbs will glow in parallel circuit.

but the brightness of each bulb differs in series circuit.

removing bulbs:if u remove a bulb from parallel circuit,the other bulbs continue glowing in the same brightness

but if u remove a bulb in series circuit,the brightness of each bulb increases.

Answer:

The person above is correct.

Explanation:

In a parallel sequence, the light bulbs have electrons that flow equally. Though, in a series circuit, it's mainly connected to one wire, and the electrons get weaker.

Converting compound units
You would like to know whether silicon will float in mercury and you know that can determine this based on their densities. Unfortunately, you have the density of mercury in units of kilogram/meter3 and the density of silicon in other units: 2.33 gram/centimeter3. You decide to convert the density of silicon into units of kilogram/meter3 to perform the comparison. By which combination of conversion factors will you multiply 2.33 gram/centimeter3 to perform the unit conversion?

Answers

Answer:

Dividing the silicon density by 1000 and then multiply it by 1000000.

Explanation:

A kilogram equals 1000 grams and a cubic meter equals 1000000 cubic centimeters. Hence, we must divide the silicon density by 1000 and then multiply itby 1000000 to convert the value into kilograms per cubic centimeter. That is:

[tex]x = 2.33\,\frac{g}{cm^{3}}\times \frac{1\,kg}{1000\,g}\times \frac{1000000\,cm^{3}}{1\,m^{3}}[/tex]

[tex]x = 2330\,\frac{kg}{m^{3}}[/tex]

In a nutshell, we must multiply the density of silicon by 1000 to obtains its value in kilograms per cubic meter.

A curve that has a radius of is banked at an angle of . If a -kg car navigates the curve at without skidding, what is the minimum coefficient of static friction between the pavement and the tires

Answers

Answer:

0.65

Explanation:

For whatever reasons, the parameters are not giving. So, I will assume by myself to make the calculations easier. You can substitute whatever it is to it from your question.

Given that

Radius of the road, r = 63 m

Speed of the car, v = 20 m/s

The relationship between a car that is passing through a curve and it's frictional force is said to be

U(s) * g = v²/r

In the formula above,

U(s) = coefficient of static friction

g = acceleration due to gravity, 9.8 m/s²

v = velocity of the car

r = radius of the road

Now when we substitute the earlier stated values, we have

U(s) * 9.8 = 20² / 63

U(s) * 9.8 = 400 / 63

U(s) * 9.8 = 6.35

U(s) = 6.35 / 9.8

U(s) = 0.65

Thus, our coefficient of static friction, based on the stated values is 0.65

Derivation 1.2 showed how to calculate the work of reversible, isothermal expansion of a perfect gas. Suppose that the expansion is reversible but not isothermal and that the temperature decreases as the expansion proceeds. (a) Find an expression

Answers

Answer:

(a) The work done by the gas on the surroundings is, 17537.016 J

(b) The entropy change of the gas is, 73.0709 J/K

(c) The entropy change of the gas is equal to zero.

Explanation:

(a) The expression used for work done in reversible isothermal expansion will be,

where,

w = work done = ?

n = number of moles of gas  = 4 mole

R = gas constant = 8.314 J/mole K

T = temperature of gas  = 240 K

= initial volume of gas  =  

= final volume of gas  =  

Now put all the given values in the above formula, we get:

The work done by the gas on the surroundings is, 17537.016 J

(b) Now we have to calculate the entropy change of the gas.

As per first law of thermodynamic,

where,

= internal energy

q = heat

w = work done

As we know that, the term internal energy is the depend on the temperature and the process is isothermal that means at constant temperature.

So, at constant temperature the internal energy is equal to zero.

Thus, w = q = 17537.016 J

Formula used for entropy change:

The entropy change of the gas is, 73.0709 J/K

(c) Now we have to calculate the entropy change of the gas when the expansion is reversible and adiabatic instead of isothermal.

As we know that, in adiabatic process there is no heat exchange between the system and surroundings. That means, q = constant = 0

So, from this we conclude that the entropy change of the gas must also be equal to zero.

Explanation:

Concerning the work done by a conservative force, which of the following statements, if any, are true? It can always be expressed as the difference between the initial and final values of a potential energy function. It is independent of the path of the body and depends only on the starting and ending points. When the starting and ending points are the same, the total work is zero.

Answers

Answer:

It is independent of the path of the body and depends only on the starting and ending points.

Explanation:

In Physics we define a conservative force as a force that is independent of the path of the body and depends only on the starting and ending points.

For conservative forces we can write;

KEi + PEi = KEf +PEf

where;

KEi= initial kinetic energy

PEi= initial potential energy

KEf= final kinetic energy

PEf= final potential energy

This equation is known as the principle conservation of mechanical energy . It applies only to conservative forces where friction is negligible. The term KE + PE  is also known as the total mechanical energy of the system.

Write a haiku
poem
explaining
why graphing
is useful.
If you are
able, share
your poem
with others.

Answers

Answer:

Explanation:

graphing is helpful

helps visualize the line

of your equation

first correct answer gets brainliest

Answers

Answer:

electrical energy transforming into sound energy in speaker

Answer:

the first one. Electrical energy transforming into sound energy in a speaker

What cause objects to move? In three to five sentences .

Answers

Answer:

Gravity can affect the motion of objects as the force pulls objects closer to earth. Kinetic energy also causes movement in objects as that is energy in motion coming from stored energy known as (potential energy). With almost most importantly is needed is a force as without a force acting upon an objects is moving will continue to move and an object at rest will remain at rest as a gravitational pull or kinetic and potential energy for example are forces.

Explanation:

Have a great day :)

whats a difference between a objects kinetic energy and potential energy​

Answers

Answer:

A object having kinetic energy is in motion state.And the object whi posses potential energy i s in state of podition.

Answer:

Objects are relative to other moving and stationary objects.

Kinetic energy can be transferred from one moving object to another.

Potential energy is stored energy in an object.

how far will a brick starting from rest fall freely in 3.0 seconds?

Answers

Answer: It will be about 44.1m

Explanation:

your answer to this is 44m! hope this helps

A student uses a microwave oven to heat a meal. The wavelength of the radiation is 8.97 cm. What is the energy of one photon of this microwave radiation? Multiply the answer you get by 1025 to be able to input a number more easily into canvas. Enter to 2 decimal places.

Answers

Answer:

The energy of one photon is 2.21x10⁻²⁴ J. Multiplied by 10²⁵ is 22.10 J.

         

Explanation:  

The energy (E) of a photon is:

[tex] E = h\frac{c}{\lambda} [/tex]

Where:

h: is the Planck's constant = 6.62x10⁻³⁴ J.s

λ: is the wavelength of the radiation = 8.97 cm

c: is the speed of light = 3.00x10⁸ m/s

[tex] E = h\frac{c}{\lambda} = 6.62 \cdot 10^{-34} J.s\frac{3.00\cdot 10^{8} m/s}{8.97 \cdot 10^{-2} m} = 2.21 \cdot 10^{-24} J [/tex]

Hence, the energy of one photon is 2.21x10⁻²⁴ J.

Now, if we multiply the answer by 10²⁵ we have:

[tex] E = 2.21 \cdot 10^{-24} J \cdot 10^{25} = 22.10 J [/tex]

I hope it helps you!

The energy of one photon is 2.21x10⁻²⁴ J. Multiplied by 10²⁵ is 22.10 J.

Calculation of energy:

We know that

[tex]E = h\frac{c}{\lambda}[/tex]

Here

h be the Planck's constant = 6.62x10⁻³⁴ J.s

λ be the wavelength of the radiation = 8.97 cm

c be the speed of light = 3.00x10⁸ m/s

Now

Here we need to multiply the answer 10^25 so that the correct answer could come.

[tex]E = 6.62.10^{-34} \frac{3.00.10^{8}}{8.97.10^{-2}}[/tex]

=  2.21x10⁻²⁴ J.

= 22.10 J.

Hence, the energy of one photon is 2.21x10⁻²⁴ J. Multiplied by 10²⁵ is 22.10 J.

learn more about energy here; https://brainly.com/question/24719731

50 POINTS!!! PLEASE!!!!!! Pls help me with this been stuck on it in like FOREVER!! PLSS.

Answers

Backward. The most force is the 428 g block.

Answer:

it will move in 356.5g in diagonal direction(resultant or between the both direction)

Explanation:

285+428/2=356.5g

Hope u like it

PLZ MARK ME AS BRAINLIEST

A car takes 8 s to increase its velocity from 10 m/s to
30 m/s. What is its average acceration?

Answers

Answer:

Average acceleration is 2.5 m/s^2.

Explanation:

Average acceleration can be found by dividing the change in speed by the change in time.

We know that the initial velocity=10m/s, the final velocity=30m/s and time elapsed is t=8s.

a= (Final velocity-Initial Velocty)/t

a=(30-10)/8=20/8=2.5 m/s^2

2. Which blood cells help in clotting of the blood​

Answers

Answer:

Platelets

Explanation:

Platelets are tiny blood cells that help your body form clots to stop bleeding. If one of your blood vessels gets damaged, it sends out signals to the platelets. The platelets then rush to the site of damage and form a clot to stop the bleeding.

Answer:

[tex]\boxed {\tt Platelets}[/tex]

Explanation:

There are three main types of blood cells:

Red blood cells: transports oxygen to cells and carbon dioxide to lungsWhite blood cells: protects the body against disease Platelets: help clot blood and stop bleeding

We are looking for which blood cell helps clot the blood. From the list above, we can see the best answer is platelets.

A cup of hot coffee initially at 95 degrees C cools to 80 degrees C in 5 min while sitting in a room of temperature 21 degrees C. Using Newton's law of cooling, determine when the temperature of the coffee will be a nice 50 degrees C.

Answers

Answer:

When the temperature of the coffee is 50 °C, the time will be 20.68 mins

Explanation:

Given;

The initial temperature of the coffee T₀ = 95 °C

The temperature of the room = 21°C

Let T be the temperature at time of cooling t in mins

According to Newton's law of cooling;

[tex]\frac{dT}{dt} \alpha (T-21)\\\\\frac{dT}{dt} = k (T-21)\\\\\frac{dT}{T-21} = kdt\\\\\int\limits {\frac{dT}{T-21}} = \int\limits kdt\\\\Log(T-21) =kt + Logc \\\\Log (\frac{T-21}{c} ) = kt\\\\T -21 = ce^{kt}\\\\At \ t = 0, T = 95\\\\95-21 = ce^0\\\\74 = c\\\\New, equation: T -21 = 74e^{kt}\\\\Again; when \ t= 5\ min, T = 80\\\\80 -21 = 74e^{5k}\\\\59 = 74e^{5k}\\\\e^{5k} = \frac{59}{74}\\\\ 5k = ln(\frac{59}{74})\\\\5k = -0.2265\\\\k = -0.0453[/tex]

When the temperature is 50 °C, the time t in min is calculated as;

[tex]T -21 = 74e^{-0.0453t}\\\\50 -21 = 74e^{-0.0453t}\\\\29 = 74e^{-0.0453t}\\\\\frac{29}{74} = e^{-0.0453t}\\\\0.39189 = e^{-0.0453t}\\\\ln(0.39189 ) = {-0.0453t}\\\\-0.93677 = {-0.0453t}\\\\t = \frac{-0.93677}{-0.0453}\\\\ t = 20.68 \ mins[/tex]

Therefore, when the temperature of the coffee is 50 °C, the time will be 20.68 mins

In 10 minutes the hot coffee will attain the temperature of 50 degrees Celsius.

Initially the hot cup of coffee at the temperature of 95 degrees Celsius but after 5 minutes its temperature decreases from 95 to 85 degrees Celsius which is 15 degrees Celsius decrease so in other 5 minutes, the temperature decreases to 65 degrees Celsius.

Again after 5 minutes the temperature will further decrease finally the cup of coffee attain the temperature of 50 degrees Celsius so we can conclude that in 10 minutes the hot coffee will gain the 50 degrees Celsius temperature.

Learn more: https://brainly.com/question/18402982

g (a) Calculate the block's final speed when it reaches the bottom of the frictionless inline. Keep 2 decimal places.

Answers

Answer:

Explanation:

The question is incomplete. Here is the complete question with attachment below.

In the above figure on the LEFT side, a block (mass = 2.8 kg) starts from rest at the top of a frictionless inline and slides to the bottom. The height of the incline is h=6.5 m, angle

Other Questions
Which of the following is true about responsibility in the U.S. Court system? (3 points) Which of these is not a human activity that impacts the environment?AtransportationBconstructionCphotosynthesisDmanufacturing What did you learn about evaluating online sources? Why does it matter? HELP ME PLEASE!!!!!!!!!Which statement describes the system of equations?5x-3y=34x-2y=4It has infinitely many solutions.It has no solution.It has one solution (24/13, -14/13)It has one solution (8, 2). The sign of the leading coefficient for the polynomial equation of the graph is negative positive zero The map shows the Gupta empireSamudra Gupta's conquests expanded the Gupta Empire to include a large portion of territory along which area?A.the western coast B.the eastern coast C.the southern tip of a the peninsula D.the islands in the Bay of Bengal use the vertex formula to find the vertex of the quadratic function f(x)=-x^2+6x-10 Once alcohol is consumed, it stays in the body until the liver can break down, or ______ the alcohol The model represents the change in the DNA content of a cell during the cell cycle. DNA Content During the Cell Cycle 22 1 Complete Sets of DNA in Nucleus 1 Ceciclease Simplify 72+3w2 - 29w-61w2 + 23w - 42. Yuki is writing a literary critique about a novel. What can she do to make sure her thesis is well supported? discuss her own real-life experiences explain the dictionary definition of an important term in the essay include a relevant quotation from the novel make a sweeping statement that appeals to a large group of people Andy wrote the equation of a line that has a slope of Step 2: y plus 2 equals StartFraction 3 Over 4 EndFraction x minus StartFraction 9 Over 4 EndFraction. and passes through the point (3, 2) in function notation.Step 1: y (2) = Step 1: y minus left-parenthesis negative 2 right-parenthesis equals StartFraction 3 Over 4 left-parenthesis x minus 3 right-parenthesis. (x 3)Step 2: y + 2 = Step 2: y plus 2 equals StartFraction 3 Over 4 EndFraction x minus StartFraction 9 Over 4 EndFraction.x Step 3: y + 2 + 2 = Step 2: y plus 2 equals StartFraction 3 Over 4 EndFraction x minus StartFraction 9 Over 4 EndFraction.x + 2Step 4: y = Step 2: y plus 2 equals StartFraction 3 Over 4 EndFraction x minus StartFraction 9 Over 4 EndFraction.x Step 5: f(x) = Step 2: y plus 2 equals StartFraction 3 Over 4 EndFraction x minus StartFraction 9 Over 4 EndFraction.x Analyze each step to identify if Andy made an error. Yes, he made an error in Step 1. He switched the x and y values.Yes, he made an error in Step 2. He did not distribute StartFraction 3 Over 4 EndFraction properly. Yes, he made an error in Step 3. He should have subtracted 2 from both sides. No, his work is correct. Compare and contrast the three types of music listening.Include examples of how or when you might employ each listening technique. which of the following is a healthy blood pressure level 120/95, 130/80, 110/75, 115/85 If C is a circles circumference and r is its_____,then C=2pi r. The_____of a circle can be found by taking the product of half the circumference and the radius -5(2x+9)? simplify the expressions by disturbing the negatives and combining like terms How did the consequences of the Crusades compare to the initial causes HELPPP!! HELPPPP!!! HELPPP!! ASAPPPP rediger le debut d'un recit un utilisant correctement l'imparfait de narration et l'imparfait de description Trade barriers can benefit a country by:A. helping domestic industries succeed despite foreign competition.B. making the country more reliant on goods from foreign markets.C. lowering the cost of consumer products by increasing efficiency.D. increasing the variety of products available for consumers.