Answer:
Deposition
Explanation:
Deposition is the phase transition in which gas transforms into solid without passing through the liquid phase. Deposition is a thermodynamic process. The reverse of deposition is sublimation and hence sometimes deposition is called desublimation.
The Principle Quantum Number describes what aspect of electron orbitals?
a) shape.
b) orientation.
c) spin.
d) energy level.
Answer:
C
Explanation:
Because that's the spin in its orbitals.
5 grams of KClO3 is dissolved in 100 g of water at 30 °C. How
many more grams of Kcloz Should be added in order to create a
saturated solution?
A 5 grams
B
10 grams
С
15 grams
D
1 gram
Answer:
15 grams
Explanation:
Sort the characteristics based on whether they describe a dog, a computer, or both.
has internal
organization
has living
cells
uses energy
produces
offspring
lacks genetic
material
Answer:
both have internal organization dog only has living cells both use energy dogs only produce offspring computers only lack genetic material
which other metal can substitute (in place of) iron explain you answer.. Aluminum, copper or iron?
Answer+Explanation:
Titanium ( in place of iron)
Titanium could be an excellent replacement for iron when it comes to tensile strength versus weight. It would be the first choice as a building material metal and building skeletons/bridges would use titanium instead of iron.
Magnesium alloys (in place of aluminum)
Magnesium alloys potentially met the present demands for lighter and reliable construction. With comparable specific stiffness, higher specific strength and energy absorption magnesium alloys have the potential to replace steel and aluminum alloys.
aluminum (in place of copper)
Most non-copper metal cabling is aluminum, and it is often used in areas where copper is not a likely alternative. However, it is used more now as a replacement than it has ever been. It is cheaper than copper, and its relative density allows for more cable to be made from a ton of aluminum than a ton of copper.
hope it helps you
Which ocean borders Africa on the western coast?
pls answer for 20 coiins
Answer:
indian ocean
Explanation:
The white Dwarfs are a group of stars that are-
A)Extremely bright and hot
B)Low in brightness but are average to high in temperature
C)Average in brightness but high in temperature
D)Average in brightness and average in temperature
Answer: A
Explanation:
The white Dwarfs are a group of stars that are extremely bright and hot. Hence option A is correct.
What are stars?Stars are defined as any large gaseous heavenly body that emits light as a result of its own internal energy sources. Stars are celestial bodies that generate their own energy through the fusing of gases. They resemble bright orbs that burn gas and produce energy. Our solar system's star, the Sun, generates energy through the fusion reaction in which helium transforms into hydrogen.
When a white dwarf first forms, it is extremely hot, but because it has no energy source, it will gradually cool as it emits its energy into space. This implies that the color temperature of its radiation, which is initially high, will gradually decrease and turn red. After using up all of their nuclear fuel, stars like the Sun become white dwarfs.
Thus, the white Dwarfs are a group of stars that are extremely bright and hot. Hence option A is correct.
To learn more about stars, refer to the link below:
https://brainly.com/question/7379319
#SPJ2
hi pls help me I don't get it
Answer:
It's most probably
A non metal
Determine the number of protons, neutrons, and electrons for a neutral potassium-41 isotope.
Please help due in 5 min. I need this to be done or my grade will drop from a 96 to a 32.
Calculate the energy and frequency of red light having a wavelength of 6.55 x 10^-5 cm.
Answer:
E = 3.035× 10-¹⁹J = 1.9eV
f = 4.58 × 10¹⁴Hz
Explanation:
wavelength = 6.55 × 10-⁷m
c = 3 × 10⁸m/s
f = ?
E = ?
a) f = c/wavelength
f = 3 × 10⁸/6.55 × 10-⁷
f = 4.58 × 10¹⁴Hz
b) E = hc/wavelength
E = 6.626×10-³⁴ × 3 × 10⁸/ 6.55 × 10-⁷
E = 3.035 × 10-¹⁹J
1ev = 1.6 × 10-¹⁹J
Therefore E = 3.035/1.6 = 1.9eV
Explanation:
speed of light = wavelength * frequency
frequency =speed of light/wavelength
Let frequency = F
Speed of light = 3.0 *10^8
wavelength = 6.55 * 10^-5 cm = 6.55 * 10^-7m
Therefore F= 3.0 *10^8m/s *6.55 * 10^-7m
F = 196.5Hz
Energy = Planck's constant * frequency
Let energy be E
Planck's constant = 6.63 * 10^-34Joule/ seconds
E = 6.63 * 10^-34 * 196.5Hz
E=1.3027 * 10^-31 J
Which of the following is a inert gas?
oxygen
chlorine
nitrogen
aragon
Answer:
argon is an inert gas
Explanation:
an inert gas is when a chemical helium, xenon, neon, krypton, radon are also inert gases
State joule thomson effect
Answer:
In thermodynamics, the Joule–Thomson effect describes the temperature change of a real gas or liquid when it is forced through a valve or porous plug while keeping it insulated so that no heat is exchanged with the environment. This procedure is called a throttling process or Joule–Thomson process
Why should we never change a symbol in chemistry?
Answer:
Chemical symbols are used to standardize the 'language of chemistry' and to identify elements and atoms in a chemical formula easily. Chemical symbols consist of one or two letters, most often derived from the name of the element.
Explanation:
lonic compounds can conduct electricity in
Answer:
Ionic compounds conduct electricity when molten (liquid) or in aqueous solution (dissolved in water), because their ions are free to move from place to place. Ionic compounds cannot conduct electricity when solid, as their ions are held in fixed positions and cannot move
Explanation:
What do I write? Please hurry
Answer:
Plants wilt when the turgor turns to zero. From diminished water in cells. The rate of water being lost is greater then the water being absorbed.
Something like this. NOT EXACTLY THIS this is just an example.
I didn't know anything about this topic but I looked it up. For the other words I would look up the other words and see what they have to do with plants withering.
25 pointss How do the plates and mantle interact at each type of plate boundary?
Answer:
what that girl said lol
Answer:
honestly.. idk lol
Explanation:
(2 words) if compose means to put together then decompose means to what? 9 letters!
A compound composed of only C and H contains 79.88 % C by mass. What is its empirical formula?
C a CH 3
Ob.CH 2
Oc CH 4
0 0 CH
Оe. Сэн
Answer:
a. CH3
Hope this helps.
omg can somebody please help me with these 2 questions
Answer: Q4=1 Q5=2
Explanation:
Best of luck.
Answer:
4. '4' "pathogens can interfere with normal life functions."
5. '2' "synthesizing antibodies that mark these organisms to be destroyed."
Explanation:
Which of these is NOT a layer of the skin?
Answer:
Penis EPISODE ONE!!
NEW ADVENTURES
Explanation: MAKE SURE TO LIKE AND SUB!!
What is the mass of 2.23 x 10^23 atoms of sulfur?
Answer: 32.07 g/mole
Explanation:
1 mole of sulfur contains 6.022 ×10^23 atoms
1 mole is equal to 32.07 g
6.022 ×10^23 atoms = 32.07
How does the amount of fertilizer affect how many potatoes a plant produces?
Answer:
Excess fertilizer alters the soil by creating too high of a salt concentration, and this can hurt beneficial soil microorganisms. Over- fertilization can lead to sudden plant growth with an insufficient root system to supply adequate water and nutrients to the plant
Explanation:
What element is represented by each electron
configuration?
A. 1s 2s22p5
B. [Ar]4s
C. [Xe]6s24f
D. [Kr]5s4d105p+
E. [Rn]7s25f13
F. 1s 2s 2p 3s 3p 4s3d104p
Answer:
F.1s 2s 2p 3s 3p 4s3d104p
The element in the first configuration is F and the element in the second option is calcium Ca. The configuration in option c is of cerium Ce and it is cadmium in option D. The configuration in E is mendelevium and F is zinc.
What is electronic configuration?An electronic configuration represents the filling of electrons in various energy level. Electrons fill from the lowest energy levels to the highest energy level.
The first configuration have a total of 9 electrons. The 9th element is fluorine. The second configuration given is of 20 electrons. That is 18 electrons of argon plus 2 electrons in 4s. The 20th element is calcium.
The third configuration have 58 electrons and the element is cerium Ce. The configuration given in option D is of cadmium with 48 electrons and that in option E is mendelevium with 101 electrons.
In the last option, the configuration contain a total of 30 electrons. 3o th element in periodic table is zinc, Zn.
To find more about electronic configuration, refer the link below:
https://brainly.com/question/14283892
#SPJ2
Does salt affect how long an ice cube melts?
I am just talking about normal salt, not special salt (if that exists).
Answer:
Ice cubes with salt melt faster. When you add salt, it dissolves in the water of the ice cube. The freezing temperature of salt water is 32 degrees Fahrenheit lower than that of fresh water.
A special layer of dermal cells are found on the top side of leaves. What level of organization would it belong to
Answer:
Tissue level of organization
Explanation:
The various levels of the organization of life are as follows:
Cells: a cell is the basic unit of ife
Tissues; A tissue is a group of cells with a common origin. performing similar functions.
Organ: an organ is a group of tissues with varied or similar function that work together to perform a specific function.
System: a system is a group of different organs that work together in the body to perform a specific function.
Since, the leaf is an organ in the plant that performs the function of photosynthesis, the group of dermal cells found on the leaf are in the tissue level of organization, they perform the function of protection for the leaf.
In which option do all three particles have the same electronic configuration?
And the same number of neutrons? (7N , 8O , 9F ,10Ne , 12Mg)
(a) 15N3- 16O2- 19F-
(b) 18O2- 19F- 20Ne
(C) 19F- 20Ne 23Na+
(d) 22Ne 23Na 24Mg2+
b. ₈¹⁸O²⁻ , ₉¹⁹F⁻ , ₁₀²⁰Ne
Further explanationThe Atomic Number (Z) indicates the number of protons and electrons in an atom of an element.
Atomic number = number of protons = number of electrons ⇒ neutral number
Atomic mass is the sum of protons and neutrons
Atomic Number (Z) = Atomic mass (A) - Number of Neutrons
₈¹⁸O²⁻Atomic mass = 18
Atomic number = 8 , gain 2 electron ⇒ total 10 electrons
Configuration : 1s², 2s², 2p⁶ (10 electrons)
Neutrons : 18 - 8 = 10
₉¹⁹F⁻Atomic mass = 19
Atomic number = 9 , gain 1 electron ⇒ total 10 electrons
Configuration : 1s², 2s², 2p⁶ (10 electrons)
Neutrons : 19 - 9 = 10
₁₀²⁰NeAtomic mass = 20
Atomic number = 10
Configuration : 1s², 2s², 2p⁶ (10 electrons)
Neutrons : 20 - 10 = 10
N yogurt de 125 g muestra en su etiqueta el contenido de algunas de sus sustancias nutricionales:¿Cuál es la composición en tanto porciento en masa de cada una de las sustancias? Composición Sustancia Masa Proteínas 5,5 g Azúcares 5,0 g Sodio 0,06 g Potasio 0,15 g
Answer:
Sustancia Masa (g) Composición (% m/m)
Proteínas 5,5 4,4
Azúcares 5,0 4,0
Sodio 0,06 0,048
Potasio 0,15 0,12
Explanation:
Para calcular la composición porcentual en masa de las sustancias debemos usar la siguiente ecuación:
[tex] \%_{m/m} = \frac{m_{s}}{m_{sol}} \times 100 [/tex]
En donde:
[tex]m_{s}[/tex] es la masa de la sustancia
[tex]m_{sol}[/tex] es la masa del yogurt = 125 g
Para las proteínas:
[tex] \%_{m/m} = \frac{m_{s}}{m_{sol}} \times 100 = \frac{5,5 g}{125 g} \times 100 = 4,4 \% [/tex]
Para los azúcares:
[tex] \%_{m/m} = \frac{5,0 g}{125 g} \times 100 = 4,0 \% [/tex]
Para el sodio:
[tex] \%_{m/m} = \frac{0,06 g}{125 g} \times 100 = 0,048 \% [/tex]
Para el potasio:
[tex] \%_{m/m} = \frac{0,15 g}{125 g} \times 100 = 0,12 \% [/tex]
Espero que te sea de utilidad!
Robert Hooke used a microscope to observe tiny spaces in
dead cork bark.
What did his observations lead to the discovery of?
A. Bacterial cells
B. Plant cells
C. Cell division
D. Cell organelles
Explanation:
B. Plant cells is the correct answer
Answer:
plant cells cause the plant cells was his first discorvery
which atom in each pair has the larger atomic radius?
li or k
ca or ni
ga or b
o or c
cl or br
be or ba
si or s
fe or au
Answer:
1. Potassium, K.
2. Calcium, Ca.
3. Gallium, Ga.
4. Carbon, C.
5. Bromine, Br.
6. Barium, Ba.
7. Silicon, Si.
8. Gold, Au.
Explanation:
Atomic radius can be defined as a measure of the size (distance) of the atom of a chemical element such as hydrogen, oxygen, carbon, nitrogen etc, typically from the nucleus to the valence electrons. The atomic radius of a chemical element decreases across the periodic table, typically from alkali metals (group one elements such as hydrogen, lithium and sodium) to noble gases (group eight elements such as argon, helium and neon). Also, the atomic radius of a chemical element increases down each group of the periodic table, typically from top to bottom (column).
Additionally, the unit of measurement of the atomic radius of chemical elements is picometers (1 pm = 10 - 12 m).
1. Li or K: the atomic radius of lithium is 167 pm while that of potassium is 243 pm.
2. Ca or Ni: the atomic radius of calcium is 194 pm while that of nickel is 149 pm.
3. Ga or B: the atomic radius of gallium is 136 pm while that of boron is 87 pm.
4. O or C: the atomic radius of oxygen is 48 pm while that of carbon is 67 pm.
5. Cl or Br: the atomic radius of chlorine is 79 pm while that of bromine is 94 pm.
6. Be or Ba: the atomic radius of berryllium is 112 pm while that of barium is 253 pm.
7. Si or S: the atomic radius of silicon is 111 pm while that of sulphur is 88 pm.
8. Fe or Au: the atomic radius of iron is 156 pm while that of gold is 174 pm.
The atoms in each pair which has the larger atomic radius is;
Potassium, K.Calcium, Ca.Gallium, Ga.Carbon, C.Bromine, Br.Barium, Ba.Silicon, Si.Gold, Au.Definition:
Atomic radius is simply the distance from the centre of the nucleus to the outermost shell containing electrons.
In other words, the atomic radius is the distance from the center of the nucleus to the point up to which the electron cloud density is maximum.
Trend:
The atomic radius of atoms generally decreases from left to right across a period. The atomic radius of atoms generally increases from top to bottom within a group.
It is on this basis that atoms with the larger atomic radius are determined
Read more:
https://brainly.com/question/2848851
What is a characteristic that can be observed or measured without changing the chemical makeup of a substance? *
a.chemical property
b.physical property
c.chemical change
d.physical change
Global warming is mainly due to
CFC's
Ozone Holes
Nitric and sulfuric acids
Greenhouse gases
Answer:
Explanation:
Glaciers are melting, sea levels are rising, cloud forests are dying, and wildlife is scrambling to keep pace. It has become clear that humans have caused most of the past century's warming by releasing heat-trapping gases as we power our modern lives. Called greenhouse gases, their levels are higher now than at any time in the last 800,000 years.
We often call the result global warming, but it is causing a set of changes to the Earth's climate, or long-term weather patterns, that varies from place to place. While many people think of global warming and climate change as synonyms, scientists use “climate change” when describing the complex shifts now affecting our planet’s weather and climate systems—in part because some areas actually get cooler in the short term.
Climate change encompasses not only rising average temperatures but also extreme weather events, shifting wildlife populations and habitats, rising seas, and a range of other impacts. All of those changes are emerging as humans continue to add heat-trapping greenhouse gases to the atmosphere, changing the rhythms of climate that all living things have come to rely on.
What will we do—what can we do—to slow this human-caused warming? How will we cope with the changes we've already set into motion? While we struggle to figure it all out, the fate of the Earth as we know it—coasts, forests, farms, and snow-capped mountains—hangs in the balance.