nswer the following questions relating to HCl, CH3Cl, and CH3Br.HCl(g), can be prepared by the reaction of concentrated H2SO4(ag), with NaCl(s), asa.represented by the following equation.H2SO4(ag) + 2 NaCl(s) → 2 HCl(g) Na2SO4(ag)A student claims that the reaction is a redox reaction. Is the student correct?i.Justify your answer.Calculate the mass, in grams, of NaCl(s), needed to react with excess H2SO4(ag)ii.to produce 3.0 grams of HCl(g). Assume that the reaction goes to completion

Answer:

The male cones appear on the trees in the spring time.  The male cones are smaller than the female cones that we typically think of when we think of pine cones.  These cones are softer and are only on the trees in the spring.  After they release their pollen they die away and disappear.

Explanation:

Answer:

i need help with this and the answer above is wrong

Explanation:

pls

The given question is not complete, the complete question is:

Solving applied density problems Mr. Auric Goldfinger, criminal mastermind, intends to smuggle several tons of gold across International borders by disguising it as lumps of iron ore. He commands his engineer minions to form the gold into little spheres with a diameter of exactly 6 cm and paint them black However, his chief engineer points out that customs officials will surely notice the unusual weight of the "iron ore" if the balls are made of solid gold (density 19.3 g/cm'). He suggests forming the gold into hollow balls Instead (see sketch at right), so that the fake "Iron ore" has the same density as real iron ore (5.15 g/cm'). One of the balls of fake iron ore," sliced in half Calculate the required thickness of the walls of each hollow lump of iron ore. Be sure your answer has a unit symbol, if necessary, and round it to 2 significant digits.

Answer:

The correct answer is 0.29 cm.

Explanation:

To produce fake iron balls that is, formed of gold there is a need to make sure that the mass of the iron ball should be equivalent to the mass of the fake ball.  

To calculate the volume of iron ball with the help of the given diameter, the formula to be used is 4/3πr³. The diameter of the spheres mentioned in the given question is 6 cm, so the radius will be 6/2= 3 cm.  

Now, the volume of the iron ball would be = 4/3 × 3.14 × 3³ = 113.04 cm³

To determine the mass of the iron ball, the formula to be used is volume * density. Now putting the values we get,  

113.04 × 5.15 g/cm³ = 582.156 grams (The density of the iron ore is 5.15 g/cm³)

Now, the mass of the gold ball should also be equal to 582.156 g. The density of the solid gold is 19.3 g/cm³, therefore, the volume of the gold ball by using the above formula would be,  

mass of gold ball = Volume × density

Volume = mass of gold ball / density

Volume = 582.156 g / 19.3 g/cm³

= 30.1635 cm³

Thus, the volume of the hollow sphere would be 30.1635 cm³ with the outer radius as 3 cm, now there is a need to find the inner radius.  

Volume of hollow ball = 4/3π [R³ -r³]

30.1635 cm^3 = 4/3 pie [3³ = r³]

30.1635 × 3/4 × 3.14 = 27-r³

7.2046 = 27-r³

r³ = 19.7954

r = 2.7051 cm

Hence, the thickness would be outer radius - inner radius = 3-2.7051 = 0.2949 cm or 0.29 cm.  

Answer:

The correct answer is the imperial system.

Explanation:

Only three countries in the world, that is, the United States, Myanmar, and Liberia use the imperial system. These include measurements in the form of inches, ounces, Fahrenheit, and feet. In the imperial system, the distances, height, weight, or area measurements are used eventually that traced back to everyday items or parts of the body.  

In comparison to other metric systems, the units used in the imperial system are not further differentiated easily into parts of hundreds or thousands, and are thus, regarded of less use in comparison to other metric systems by some. The real follower of the imperial system at present in the world is the United States.  

Answer:

a) Total vapor pressure = 68.948 Kpa

b) Mole fraction of A = 41%, mole fraction of B = 59%

Explanation:

Find the given attachments.

Answer:

less soluble

Explanation:

As n increases, the non polar hydrocarbon tail increases in length, while there is only one polar carboxylic group at the end. Since only the carboxylic group can form hydrogen bond with water, and the non polar hydrocarbon tail cannot, the long tail will hinder the formation of hydrogen bond between acid and water molecules, hence solubility decreases.

The carboxylic acids with general formula CH3(CH2)nCOOH to become  less water soluble as n increases.

An organic acid that has a carboxyl group joined to an R-group is said to be carboxylic. A carboxylic acid's general formula is RCOOH or RCO2H, where R stands for an alkyl, alkenyl, aryl, or other group. Carboxylic acids are frequently present.

The carboxylic acids do not produce dimers when introduced to water. Instead, individual acid and water molecules create hydrogen bonds with one another. These interactions allow carboxylic acids to disintegrate in water to create acidic solutions.

Similar to how alcohols, aldehydes, and ketones are soluble in water, carboxylic acids are as well. Acids with fewer than five carbons dissolve in water; those with a higher molecular weight are insoluble because they include a greater proportion of hydrocarbons.

Thus, The carboxylic acids with general formula CH3(CH2)nCOOH to become  less water soluble as n increases.

To learn more about carboxylic acid, follow the link;

https://brainly.com/question/15522377

#SPJ2

A FAULT is a fracture or break in Earth's surface

Answer:

Van't Hoff factor of KBr is 1.63

Explanation:

Freezing point depression due the addition of a solute follows the formula:

ΔT = Kf×m×i

Where ΔT is change in freezing point, Kf is freezing point depression constant of the solvent X, m is molality of the solution (mol / kg) and i is Van't Hoff factor.

Moles of 177g of alanine (Molar mass: 89.09g/mol) are:

177g × (1mol / 89.09g) = 1.99 moles. In 0.800kg:

1.99mol / 0.800kg = 2.49m

Replacing in freezing point depression formula:

5.9°C = Kf×2.49m×1

Alinine has a Van't Hoff factor of 1

The Kf of the solvent is:

2.37 °C/m

Molality of the 177.0g of KBr solution (Molar mass: 119g/mol) is:

177.0g × (1mol / 119g) = 1.487 moles / 0.800kg = 1.859m

And the freezing point depression formula is:

7.2°C = 2.37°C/m×1.859m×i

1.63 = i

Van't Hoff factor of KBr is 1.63

Answer:

The mass of PbI2 will be 18.2 grams

Explanation:

Step 1: Data given

Volume solution = 99.8 mL = 0.0998 L

mass % KI = 12.0 %

Density = 1.093 g/mL

Volume of the other solution = 96.7 mL = 0.967 L

mass % of Pb(NO3)2 = 14.0 %

Density = 1.134 g/mL

Step 2: The balanced equation

Pb(NO3)2(aq) + 2 KI(aq) ⇆ PbI2(s) + 2 KNO3(aq)

Step 3: Calculate mass

Mass = density * volume

Mass KI solution = 1.093 g/mL * 99.8 mL

Mass KI solution = 109.08 grams

Mass KI solution = 109.08 grams *0.12 = 13.09 grams

Mass of Pb(NO3)2 solution = 1.134 g/mL * 96.7 mL

Mass of Pb(NO3)2 solution = 109.66 grams

Mass of Pb(NO3)2 solution = 109.66 grams * 0.14 = 15.35 grams

Step 4: Calculate moles

Moles = mass / molar mass

Moles KI = 13.09 grams / 166.0 g/mol

Moles KI = 0.0789 moles

Moles Pb(NO3)2 = 15.35 grams / 331.2 g/mol

Moles Pb(NO3)2 = 0.0463 moles

Step 5: Calculate the limiting reactant

For 1 mol Pb(NO3)2 we need 2 moles KI to produce 1 mol PbI2 and 2 moles KNO3

Ki is the limiting reactant. It will completely be consumed ( 0.0789 moles). Pb(NO3)2 is in excess. There will react 0.0789/2 = 0.03945 moles. There will remain 0.0463 - 0.03945 = 0.00685 moles

Step 6: Calculate moles PbI2

For 1 mol Pb(NO3)2 we need 2 moles KI to produce 1 mol PbI2 and 2 moles KNO3

For 0.0789 moles KI we'll have 0.0789/2 = 0.03945 moles PbI2

Step 7: Calculate mass of PbI2

Mass PbI2 = moles PbI2 * molar mass PbI2

Mass PbI2 = 0.03945 moles * 461.01 g/mol

Mass PbI2 = 18.2 grams

Answer:

The question lacks options, the options are:

A) Energy is transferred to consumers, which convert it to nitrogen and use it to make amino acid

B) Energy from producers is converted into oxygen and transformed to consumers.

C) Energy from the sun is stored by green plants and transferred to consumers.

D) Energy is transferred to consumers, which use it to produce food.

The answer is C

Explanation:

Organisms obtain energy in an ecosystem by feeding on one another in a chain called FOOD CHAIN. Energy is transferred when one organism feeds on another. A food chain always begins with a PRODUCER, which is an autotrophic organism capable of producing its own food via light energy from the sun.

In a terrestrial ecosystem, the energy a plant captures via Its Chlorophyll is used to produce food during photosynthesis. This energy is stored in the plants and transferred when a set of organisms called PRIMARY CONSUMER feeds on the plant. The transfer continues in that order till decomposers.

Answer:

that is a solid and that there are other ways to make a fire?

Answer:

Sn2–

Explanation:

The formula of the ion when tin achieves a stable electron configuration is Sn⁴⁺. Therefore, option (C) is correct.

Tin is a element with the atomic number 50 and the chemical symbol Sn. Tin is present in group 14 as a post-transition metal. Tin has two common oxidation states, +2 and +4. The oxidation state +4 of tin metal is somewhat more stable.

Sn⁴⁺ ion is chemically comparable to both of its neighbor germanium and lead in group 14. The electronic configuration of the tin metal is [Kr] 4d¹⁰5s²5p². It has four electrons in its valence shell so when it losses four electrons it gets configuration with fully filled subshells.

Sn²⁺ is called the stannous ion, while its compound SnCl₂ is known as stannous chloride.  Sn⁴⁺ is called the stannic ion, while its compound SnCl⁴ is stannic chloride which is a volatile liquid.

Learn more about tin metal, here:

https://brainly.com/question/22923484

#SPJ6

Answer:

A hole

Explanation:

put a hole in the barrel and let some water out

The thing you would add to the barrel would be holes which would cause water to fall out of the barrel.

Pound is defined as the basic unit for weight in the Foot Pound Second (F.P.S) system and is equal to 16 ounces.

An example of a pound is a man weighing 186 pounds.

The thing you would add to the barrel would be holes which would cause water to fall out of the barrel.

The amount of holes you would add and where you would add them would depend all on how much the barrel weighs without the water.

Learn more about the pounds here:

https://brainly.com/question/17408937

#SPJ2

Answer:

Energy per mole of photons = 2.31 × 10^2 KJ/mol

Explanation:

Energy, E = hf;

Where h is Planck's constant = 6.63 ×10^-34, and f is frequency of the photons.

E = 6.63 × 10^-34 × 5.8 × 10^14

E = 3.84 × 10^-22 KiloJoules

I mole of photons contains Avogadro's number of particles, 6.02 × 10^23

Therefore, the energy per mile of photon is 3.84 × 10^-22 KJ × 6.02 × 10^23

Energy per mile of photon = 2.31 × 10^2 KJ/mol

The compound whose dissolution is exothermic in the list is NaOH.

An exothermic reaction is one in which heat is gven out in the process. In an exothermic reaction, the reaction vessel feels hot after the reaction is complete.

The table is not shown here. However, we know that the dissolution of NaOH in water is an exothermic process hence the answer is option C.

Learn more about exothermic reaction: https://brainly.com/question/14969584

Answer:

2HCI + Na2S ----> H2S + 2NaCl

Explanation:

For a balanced chemical equation, the number of moles of atoms on the reaction side must equal the number of moles of atoms on the product side, in accordance with the law of conservation of mass.

The correct answer is:

2HCI + Na2S ----> H2S + 2NaCl

Since it has equal number of moles of each atom on both sides of the equation: 2 atoms each of hydrogen, chlorine, and sodium on both sides of the equation as well as 1 atom of sulphur on both sides of the equation.

Answer:

Intertidal zone

Neritic zone

Open-ocean zone

Note: the correct questions are found below;

In which zone do you find marshes and mangrove forests?

In which zone are plankton plentiful, providing plenty of food for the fish that live there?

In which zone would you find very little plant or animal life compared to other zones?

Explanation:

The intertidal zone, sometimes called the littoral zone, is the area of the marine shoreline that is exposed to air at low tide, and covered with seawater when the tide is high. Intertidal zonation refers to the tendency of plants and animals to form distinct communities between the high and low tide lines. Some microclimates in the littoral zone are moderated by local features and larger plants such as mangroves.

The neritic zone is the region of shallow water (200 meters depth) above the continental shelf where light penetrates to the sea floor.

Due to the abundant supply of sunlight and nutrients such as plankton in this zone, it is the most productive ocean zone supporting the vast majority of marine life.

The open oceans or pelagic ecosystems are the areas away from the coastal boundaries and above the seabed. It encompasses the entire water column and lies beyond the edge of the continental shelf. It extends from the tropics to the polar regions and from the sea surface to the abyssal depths.

Answer:

Intertidal zone

Neritic zone

Open-ocean zone

Explanation:

Answer:

1. ELECTRON MOVES FROM THE n = 4 to n = 1 LEVEL

2. ENERGY IS EMITTED

3. THE ELECTRON MOVES CLOSER TO THE NUCLEUS

Explanation:

the question is incomplete as the picture is not shown but here is the picture and the solution.

Bohr model of the hydrogen atom shows that electrons would not emit energy but emit or absorb protons as it moves to a lower or higher energy levels respectively. In this question as shown in the picture below, the hydrogen atom moves from energy level 4 to energy level 1 and in such transition, energy is emitted and returns to its ground state after been excited to a higher level o n equals to 4. The energy emitted follows the law of conservation of energy. That is the amount of energy needed to excite the atom to a higher level is emitted upon transition back to the ground state.

The size of the hydrogen atom will also reduce and the electron will move closer to the nucleus. This is because as energy increases, the electron is found at a greater distance away from the nucleus and vice versa. And as the electron moves farther away the electrostatic force between it and the nucleus reduces and it is loosely held by the nucleus and vice versa, As the case of the question, the electron moves closer to the nucleus and it is strongly attached to the nucleus due to increase electrostatic attraction between it and the nucleus.

Answer:

In this transition, energy is emitted

The electron moves closer to the nucleus

Explanation:

In the Bohr's model of the atom, electrons occupy specific energy levels shown by the principal quantum number. An electron that is stationary in its orbit does not radiate energy.

However, an electron may absorb energy and be excited to higher energy levels or emit energy when descending from a higher to a lower energy level. This energy is usually observed as a photon of light of appropriate wavelength and frequency.

In the image, the electron descends from energy level n=4 to energy level n=1. Since it has moved from a higher to a lower energy level, energy is emitted. Recall that energy levels increase outwards from the nucleus. Since n=1 is closest to the nucleus, the electron has moved closer to the nucleus. Hence the answers above.

Answer:

3Mg(s) +2P(s) -------> Mg3P2(s) + energy

Keq= [Mg3P2]/[Mg]^3 [P]^2

Explanation:

The equation for the formation of magnesium phosphide from its elements is;

3Mg(s) +2P(s) -------> Mg3P2(s) + energy

Hence we can see that three moles of magnesium atoms combines with two moles of phosphorus atoms to yield one mole of magnesium phosphide. The equation written above is the balanced chemical reaction equation for the formation of the magnesium phosphide.

The equilibrium expression for the reaction K(eq) will be given by;

Keq= [Mg3P2]/[Mg]^3 [P]^2

Answer:

210 amps

Explanation:

B

Answer:

in all green plants and most algae

Answer:

5.12 L

Explanation:

P1V1/T1 = P2V2/T2

1.71 atm *10.0L /100 K = 9.70 atm *x/290.29 K

x = 1.71 atm *10.0L*290.29K /(100 K * 9.70 atm)= 5.12 L

Answer:

Coal; H2SO4(sulfuric acid)

Explanation:

Coal has been very helpful in power generation for decades. It has also become a major contributor to global warming, and has major negative effects on human health and the environment.

Coal is formed when dead plant matter submerged in swamp environments is subjected to the geological forces of heat and pressure over hundreds of millions of years. Over time, the plant matter transforms from moist, low-carbon peat, to coal, an energy- and carbon-dense black or brownish-black sedimentary rock.

There are many types of coal. Each type of coal must contain sulfur, which, when burned, releases toxic air pollution. The extent Sulfur content in a given coal sample is largely decided by the conditions under which the coal is formed. Low-sulfur coal usually develop in freshwater environments; high-sulfur coals are formed in brackish swamps.

The burning of coal releases its sulphur content as oxides of sulphur (SOx). These oxides of sulphur dissolve in rain water to form acid rain. Hence rain falling around the Colstrip power plant will contain H2SO4 resulting from the dissolution of SOx in rain droplets.

Answer:

The acid must be a concentrated acid

Explanation:

Ethene is prepared in the laboratory by heating ethanol with excess concentrated tetraoxosulphate VI acid at 170°C . The reactionoccursc in two stages;

1) when the ethanol and sulphuric acid are mixed in a ratio of 1:2, ethyl hydrogentetraoxosulpate VI is formed

2) The compound formed in the first step is heated in the presence of excess concentrated sulphuric acid to give ethene and sulphuric acid.

The overall reaction can be perceived as the dehydration of ethanol. The gas produced (ethene) is usually passed through sodium hydroxide solution to remove any gaseous impurities present.

concentrated sulphuric acid is used in this process since it is a good dehydrating agent.

Answer:

most common non metal is chlorine

Answer:

  0.2 M

Explanation:

The molarity is the number of moles per liter:

  (0.05 moles)/(0.25 liter) = 0.2 moles/liter = 0.2 M

Answer:

Well, for one thing,I played football for 7 years. Gatorade wouldn't be Gatorade without electrolytes. The electrolytes in that bottle of Gatorade give you energy. Those electrolytes Are what propel you through whatever you are doing at that time. Those are what give you energy.

Explanation:

Answer:

a. Raise the pH slightly

Explanation:

We know that

Pka of HNO2/KNO2 =3.39

Moles of HNO2 in the buffer=0.247 mol/L×1L=0.247 moles

Moles of NO2-=0.329mol/L×1L=0.329 moles

If 0.271 moles of Ca(OH)2 is added it will neutralise 0.136 moles of acid ,HNO2,remaining HNO2=0.247-0.136=0.111 moles

Moles of NO2- will increase as 0.0333 moles Ca(NO)2 will be formed =0.0333+0.036=0.0693 moles

pH=pka+log [base]/[acid]      {henderson -hasselbach equation}

=3.39+log (0.0693/0.0317)=3.39+0.34=3.73

pH=3.73

Answer:

D. Ultraviolet light should have a short wavelength, not a long wavelength.

Explanation:

just took the quiz on Ed

The mistake Gino made is, ultraviolet light should have a short wavelength, not a long wavelength.

Electromagnetic spectrum is the arrangement of electromagnetic radiations in the order of increasing frequency or decreasing wavelength.

Examples electromagnetic radiations based on increasing wavelength  include;

Thus, the mistake Gino made is, ultraviolet light should have a short wavelength, not a long wavelength.

Learn more about electromagnetic radiation here: https://brainly.com/question/25847009