Need help please I need to select one element for each following families on the periodic table

Coal and Energy obtained from coal are formed as a result of decomposed life matter such as plants

A. Compressed ancient plants

It should be noted that coal is also a type of fossil fuel formed by prolong compaction of fossil material e.g dead plants over millions of years, forest lives etc. and as a result of high pressure and heat acting on these fossil matter they are transformed to fuel.

In summary, fossil fuels are formed as a result of age long compressed matter.

Learn more about fossil matter here:

https://brainly.com/question/11829803

Answer:

which language is this please tell me

Answer:

14.9 g

Explanation:

Step 1: Write the balanced equation

C₄H₁₀ + 6.5 O₂ ⇒ 4 CO₂ + 5 H₂O

Step 2: Calculate the moles corresponding to 9.57 g of C₄H₁₀

The molar mass of C₄H₁₀ is 58.12 g/mol.

9.57 g × 1 mol/58.12 g = 0.165 mol

Step 3: Calculate the moles of H₂O produced from 0.165 moles of C₄H₁₀

0.165 mol C₄H₁₀ × 5 mol H₂O/1 mol C₄H₁₀ = 0.825 mol H₂O

Step 4: Calculate the mass corresponding to 0.825 mol of H₂O

The molar mass of H₂O is 18.02 g/mol.

0.825 mol × 18.02 g/mol = 14.9 g

Answer:

1) True

Explanation:

Answer:

The quantity of  heat required to raise the  temperature of 500 g of  iron by 2°C is 500 J.

Explanation:

Calorimetry is responsible for measuring the amount of heat generated or lost in certain physical or chemical processes.

The sensible heat of a body is the amount of heat received or transferred by a body when undergoing a temperature variation (Δt) without there being a change in physical state (solid, liquid or gaseous).

Its mathematical expression is the fundamental equation of calorimetry. This is:

Q = c * m * ΔT

where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.

In this  case:

Replacing:

Q= 500 [tex]\frac{J}{kg*C}[/tex] *0.500 kg*2 C

Solving:

Q= 500 J

The quantity of  heat required to raise the  temperature of 500 g of  iron by 2°C is 500 J.

Answer:

i think its c [everything is so blury]

Explanation:

Answer:

electrophilic addition and

nucleophilic addition.

Answer:

the two types of addition compoundsare:

1.electrophilic addition

2. nucleophilic addition.

Answer: The mass of [tex]CO_2[/tex] produced is 0.44 g

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass.  The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of calcium carbonate = 10 g

Molar mass of calcium carbonate = 100 g/mol

Plugging values in equation 1:

[tex]\text{Moles of calcium carbonate}=\frac{10g}{100g/mol}=0.1 mol[/tex]

The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (mL)}}[/tex] .....(2)

Molarity of HCl = [tex]0.2mol/dm^3=0.2mol/L[/tex]     (Conversion factor: [tex]1L=1dm^3[/tex]

Volume of solution = [tex]100cm^3=100mL[/tex]          (Conversion factor: [tex]1mL=1cm^3[/tex]

Putting values in equation 2, we get:

[tex]0.2=\frac{\text{Moles of HCl}\times 1000}{100}\\\\\text{Moles of HCl}=\frac{0.2\times 100}{1000}=0.02mol[/tex]

For the given chemical reaction:

[tex]CaCO_3(s)+2HCl(aq)\rightarrow CaCl_2(aq)+H_2O(l)+CO_2(g)[/tex]

By stoichiometry of the reaction:

If 2 moles of HCl reacts with 1 mole of calcium carbonate

So, 0.02 moles of HCl will react with = [tex]\frac{1}{2}\times 0.02=0.01mol[/tex] of calcium carbonate

As the given amount of calcium carbonate is more than the required amount. Thus, it is present in excess and is considered as an excess reagent.

Thus, HCl is considered a limiting reagent because it limits the formation of the product.

By the stoichiometry of the reaction:

If 2 moles of [tex]HCl[/tex] produces 1 mole of [tex]CO_2[/tex]

So, 0.02 moles of [tex]HCl[/tex] will produce = [tex]\frac{1}{2}\times 0.02=0.01mol[/tex] of [tex]CO_2[/tex]

We know, molar mass of [tex]CO_2[/tex] = 44 g/mol

Putting values in equation 1, we get:

[tex]\text{Mass of }CO_2=(0.01mol\times 44g/mol)=0.44g[/tex]

Hence, the mass of [tex]CO_2[/tex] produced is 0.44 g

Answer:

66s^-1 will be 1/66

then to convert to minute you multiply by 69

1/66 x 60 = 3960 mins

Answer:

(a) The moles of CuSO₄ is 3.125 × 10⁻³ moles.

(b) The moles of Cu is 3.125 × 10⁻³ moles.

(c) The mass of Cu is 0.2 g.

Explanation:

Given:

Mass of CuSO₄ = 0.5 g

Molar mass of CuSO₄ = 160 g/mol

The given balanced chemical equation is:

[tex]2Al+3CuSO_4\rightarrow 3Cu+Al_2(SO_4)_3[/tex]

Part (a):

Calculating the moles of CuSO₄.

[tex]\text{Moles of } CuSO_4=\frac{\text{Mass of }CuSO_4}{\text{Molar mass of }CuSO_4}\\\\\text{Moles of } CuSO_4=\frac{0.5g}{160g/mol}\\\\\text{Moles of } CuSO_4=3.125\times 10^{-3}mol[/tex]

Thus, the moles of CuSO₄ is 3.125 × 10⁻³ moles.

Part (b):

Calculating the moles of Cu.

From the balanced chemical equation, we conclude that:

As, 3 moles of CuSO₄ reacts to give 3 moles of Cu

So, 3.125 × 10⁻³ moles of CuSO₄ reacts to give 3.125 × 10⁻³ moles of Cu

Thus, the moles of Cu is 3.125 × 10⁻³ moles.

Part (c):

Calculating the mass of Cu.

Mass of Cu = Moles of Cu × Molar mass of Cu

Molar mass of Cu = 64 g/mol

Mass of Cu = (3.125 × 10⁻³ mole) × (64 g/mol)

Mass of Cu = 0.2 g

Thus, the mass of Cu is 0.2 g.

Answer:

aasjajiakjka

Explanation:

Answer:

D

Explanation:

there is no other answer choice that does not move. This is a fool-proof question because all the other answer choices contain movement except the butterfly resting

Answer:

Explanation:

This is because, Blue color highest frequency of energy after Violet and Indigo.

Answer:

20,8ml  NaCl 6M

Explanation:

C1V1 = C2V2

Answer:

C8H18 + 25/2O2 ----> 8CO2 + 9H2O

Explanation:

2,3,3-trimethylpentane has the molecular formula C8H18.

The general formula for the combustion of an alkane is;

CnH2n+2 + 3n+1/2O2 ----->nCO2 + (n+1)H2O

In writing a balanced chemical reaction equation, the number of atoms of each element on the left hand side of the reaction equation must be the same as the number of atoms of the same element on the right hand side of the reaction equation.

For C8H18, the balanced chemical reaction equation for combustion is;

C8H18 + 25/2O2 ----> 8CO2 + 9H2O

Answer:

A. Wax drips down the side of a lot candle.

Explanation:

The chemical change from solid to liquid. This is a combustion reaction, so carbon dioxide gas and water vapour is also produced but you can't see them

Answer:

A. Wax drips down the side of a lot candle.

Explanation:

Answer:

(a) Pair 1: H₂S and HS⁻

    Pair 2: NH₃ and NH₄⁺

(b) Pair 1: HSO₄⁻ and SO₄⁻

    Pair 2: NH₃ and NH₄⁺

(c) Pair 1: HBr and Br⁻

    Pair 2: CH₃O⁻ and CH₃OH

(d)  Pair 1: HNO₃ and NO₃⁻

     Pair 2: H₃O⁺

Explanation:

When an acid loses its proton (H⁺), a conjugate base is produced.

When a base accepts a proton (H⁺), it forms a conjugate acid.

(a) H₂S is an acid. When it loses a proton, it forms the conjugate base HS⁻.

    NH₃ is a base. When NH₃ gains a proton, it forms the conjugate acid NH₄⁺

(b) The acid HSO₄⁻ loses a H⁺ ion and forms the conjugate base SO₄²⁻.

     The base NH₃ accepts a H⁺ ion to form the conjugate acid NH₄⁺.

(c) HBr is an acid. When loses the H⁺ ion, it forms the conjugate base Br⁻.

   CH₃O⁻ accepts a H⁺ ion to form the conjugate acid CH₃OH.

(d) HNO₃ loses a proton to form the conjugate base NO₃⁻.

    H₂O gains a proton to form the conjugate acid H₃O⁺.

Answer:

Scandium

Explanation:

Mendeleev played an important role in the development of the modern periodic table. His periodic table was filled with gaps. He said that these gaps were elements that were yet to be discovered. He rightly predicted many elements which have now been discovered and fitted in their proper places in the periodic table.

He used the prefix ''eka'' to refer to elements whose properties were alike but were yet to be discovered at that time.

The compound named ekaboron which he predicted to have an atomic weight between 65 (zinc) and 75 (arsenic) with a valence similar to aluminum was later discovered in 1879 and properly named scandium.

Answer:

Adding ammonium nitrate to water turns the mixture cold and is a good example of an endothermic chemical reaction!

Answer:1.b 2.A (i think it might be c) 3 (i have no clue) 4.(no clue) Sorry i only got 1 and 2 witch i think are right its been a while sense i have done this....

Explanation:

Answer:

the answer would be 6.720

Simply subtract the combined mass by the mass of the beaker.

The answer has 3 decimal places because the least amount of decimal places in the equation is 3.

Answer:

as in shapes

Explanation:

Answer:

an estimate of the strength of a bond.

Explanation:

The bond order is given as;

1/2(number of bonding electrons - number of anti bonding electrons)

The bond order tells us about the strength of bond. As the bond order increases, so does the strength of the bond because atoms involved in bonding come closer to each other as the bond length decreases.

Hence, bond order is an index of bond strength. Triple bonds are stronger than double bonds which are stronger than single bonds.

Answer:

Classify each structure according to its functional class.

Compound A contains a carbonyl bonded to two alkyl groups.

Compound B contains an oxygen bonded to two alkyl groups.

Compound C contains a carbonyl bonded to propyl and N H C H 3.

Compound D is a nitrogen bonded to three alkyl groups.

Explanation:

Compound A contains a carbonyl bonded to two alkyl groups.

-C=O group is called a carbonyl group.

If it is present between two alkyl groups then, it is a ketone.

Compound B contains oxygen bonded to two alkyl groups.

Compound B is an example of an ether molecule.

Compound C contains a carbonyl bonded to propyl and N H C H 3.

Compound C is C3H7-CO-NHCH3 which is an amide molecule.

Compound D is nitrogen bonded to three alkyl groups.

This is an example of a tertiary amine group.

Answer: The amino acid that has a positively charged R group are LYSINE and ARGININE.

Explanation:

AMINO ACIDS are the basic structural units of proteins. Each amino acid contains an amino group ( -NH2) and a carboxyl group (-COOH) in its molecule. The carbon atom of amino acid to which the functional groups are attached is know as the alpha-carbon. In neutral solution, amino acids are mainly in the form of dipolar ions. Amino acids can be prepared through hydrolysis of protein by boiling with dilute hydrochloric acid.

Amino acids can be classified according to the chemical properties of its side chain (R group) at pH 7, these include:

--> Amino acids with POSITIVELY CHARGED R group

--> Amino acids with negatively charged R group

--> Amino acids with neutral polar R group

--> Amino acids with nonpolar aliphatic R group.

Amino acids with POSITIVELY CHARGED R group are those amino acids that has side chains which contain nitrogen and resemble ammonia, which is a base. Their pKa's are high enough that they tend to bind protons, gaining a positive charge in the process. Example include LYSINE and ARGININE.

Answer:

[tex]X=75\%[/tex]

Explanation:

From the question we are told that:

Concentration [tex]C_1=17.50ppb[/tex]

Volume [tex]v=9mL[/tex]

Spike Volume [tex]V_s=1.00mL[/tex]

spike Conc [tex]C_2=2.29 ppb[/tex]

Analysis Conc [tex]C_s=15.93 ppb[/tex]

Generally the equation for  percent recovery is mathematically given by

 [tex]X=\frac{C_s'-C_1'}{C_2'}[/tex]

Where

Concentration of spiked sample C_s'

 [tex]C_s'=C_s*(v+v_s)[/tex]

 [tex]C_s'=15.92*(9+1)[/tex]

 [tex]C_2=159.2[/tex]

Concentration of unspiked sample C_1'

 [tex]C_1'=17.50*9mL[/tex]

 [tex]C_1'=157.5[/tex]

Concentration of spike sample C_2'

 [tex]C_2=2.29*1[/tex]

 [tex]C_2=2.29[/tex]

Therefore

 [tex]X=\frac{159.2-157.5}{2.29}[/tex]

 [tex]X=75\%[/tex]

Answer:

answer is b. : It has been balanced by using the half-reaction method.

Explanation:

edge 2021

Answer:b

Explanation:cuz it is