Answer:
B
Explanation:
what are remained on the cloth? explain your answer.
Answer:
on which cloth. since the sub is chemistry. which chemical or mixture or compound
A student dissolved some crystals of a salt in water.
The student added sodium hydroxide solution to the salt solution
The student added sodium hydroxide until it was in excess
Describe what the student would see if the salt contained calcium ions
Under Normal Conditions no reaction will be seen between Calcium ions (Ca⁺), NaCl (salt solution) and NaOH(sodium hydroxide).
What is a double replacement reaction ?In a double replacement reaction , the compounds present switch cation and anion to form new compounds.
But here in NaOH(sodium hydroxide) and NaCl (salt solution) the cation sodium ion Na⁺, of both the compounds is same so the end result will be same .
There will be no net reaction .
But if excess Sodium Hydroxide is added to the solution , we will see precipitate of NaCl , salt forming.
If Salt contained Ca⁺ ions , firstly NaCl will only combine with Ca⁺ ions in special conditions as Na⁺ ions are more reactive than Ca⁺ ions.
On addition of NaOH we would observe no change in normal conditions due to above stated reason .
In special conditions following reaction takes place ,in normal condition the reaction follows reverse direction.
Ca + 2 NaOH ← Ca(OH)₂ + 2 Na
Hence under Normal Conditions no reaction will be seen between Calcium ions , NaCl (salt solution) and NaOH(sodium hydroxide).
To know more about Double Displacement reaction
https://brainly.com/question/13870042
#SPJ2
Rank the following molecules (1st, 2nd, 3rd, 4th) in the order that they melt.
Sucrose
Iodine
Sodium
Paraffin
There is a picture attached
Sodium chloride has the highest melting point while iodine has the least melting point.
The melting points of solid substances depends on the nature of intermolecular forces that exists in the substance. The stronger the magnitude of intermolecular forces in a substance, the higher its melting point.
The order of melting points of the solids shown in question is as follows;
1st - Sodium chloride2nd - sucrose3rd - paraffin4th - IodineSodium chloride has the highest melting points because it is an ionic substance. Among the molecular sucrose and paraffin, sucrose has a higher melting point than sucrose because it has a greater molar mass. Iodine, a molecular substance has the least molar mass and the least melting point in the list.
Learn more: https://brainly.com/question/25777663
If a certain person has a mass of 250kg on earth, would that person's mass be on the moon, if the moon's gravity is 1.62m/s2? *
245kg x 1.62m/s2
245 x 1.62m/s2
It remains the same
The person would be weightless
Answer:
it remains the same
Explanation:
mass is like name is not changed any where mass express the amount of matter in an object which is fixed any where regardless its gravity
what type of bacteria use the enzyme nitrate reductase to metabolize nitrogen oxides and transform them back to nitrogen gas?
Denitrifying Bacteria such as Pseudomonas aeruginosa is the type of bacteria that use enzyme nitrate reductase to metabolise nitrogen oxides to nitrogen gas.
Denitrification is the process whereby nitrites or nitrogen oxides is converted to nitrogen gas by a denitrifying Bacteria such as Pseudomonas.
Pseudomonas aeruginosa uses enzyme nitrate reductase to reduce nitrate to nitrite.
Then nitrite is then converted back to nitrogen gas.
Therefore, Pseudomonas aeruginosa is a type of bacteria that uses enzyme nitrate reductase.
under the same conditions of temperature and pressure how does a liquid differ from a gas
_ is the process in which an element spontaneously transforms into another isotope of the same element, or into a different element.
Answer:
Nuclear transmutation
Explanation:
The process in which an element spontaneously transforms into another isotope of the same element, or into a different element is called nuclear transumutation. It occurs when the number of protons or neutrons in the nucleus of an atom is changed.
what happened if you poured lava on snow
Answer:
This is what could happen:
Explanation:
When lava meets ice, the resulting mess can cause flooding, destroy valuable resources and even produce explosions.
Answer: When lava meets ice, it neither explodes nor tunnels through; rather, it forms strange-looking bubbles.
Explanation:
An atom has 5 protons, 4 electrons, and 5 neutrons. Which
of the following reasons represents why this is an atom of
the element boron?
A ) The atom has 5 neutrons, just like every atom of boron
B ) The atom has 4 electrons, just like every atom of boron
C ) The atom has 14 total particles, in a combination of 5-5-4 just like every atom of boron
D ) The atom has 5 protons, just like every atom of boron
< PLEASE HELP ASAP!
Answer:
i think the answer is C
Explanation:
not sure plsss dont bash im a beginner
Answer:
B ) The atom has 4 electrons, just like every atom of boron
Explanation:
HOPE IT'S HELPWhat is oxidation state?
Answer:
a number assigned to an element in chemical combination which represents the number of electrons lost (or gained, if the number is negative), by an atom of that element in the compound
Explanation:
sodium, magnesium, iron is zero.
The definition of oxidation state is as follows: Oxidation state is a number given to the atom of an element when participating in a chemical reaction.
OXIDATION STATE:The atoms of elements are not always neutral i.e. carry no charge. They sometimes carry either positive or negative charges to become ions. Ions can either be cations (positively charged) or anions (negatively charged). The amount of charges are represented by numbers placed as a superscript in front of the element involved. These superscript charge assigned to a corresponding element during a chemical reaction is called oxidation state. The oxidation state of an element portrays the number of electrons gained or lost during the reaction.Therefore, oxidation state can be defined as a number given to the atom of an element when participating in a chemical reaction.
Learn more about oxidation state at: https://brainly.com/question/11313964
The measurable properties of a substance, such as vapor pressure and surface tension, occur due to the strength of
electrical forces between particles, as given by Coulomb's law
electrical forces between particles, as given by Newton's law
gravitational forces between particles, as given by Newton's law
O gravitational forces between particles, as given by Coulomb's law
Answer:
electrical forces between particles, as given by coulombs law.
Explanation:
Properties of a substance such as vapor pressure and surface tension depend on electrical forces between particles, as given by Coulomb's law.
The vapor pressure refers to how easily a liquid converts to gas while surface tension is the force that makes a liquid surface act as a stretched elastic skin.
Both vapor pressure and surface tension has a lot to do with the degree of polarity in a molecule. Usually, polar molecules have a low vapor pressure and high surface tension due to a high electrical forces between particles, as given by Coulomb's law.
Learn more: https://brainly.com/question/13440572
how could you distinguish an element from a compound
Answer:
Elements are pure substances which are composed of only one type of atom. Compound are substances which are formed by two or more different types of elements that are united chemically in fixed proportions.
Pls help me will give brainliest.
Where is convection happening on Earth?
A. Atmosphere
B. Earth's outer core
C. Earth's mantle
D. Oceans
E. All of the above I
Answer:
C. Earth's Mantle
Explanation:
Answer:
C
Explanation:
Earth's mantle is the correct answer
Which of the following is NOT a chemical reaction?
Select one:
a.
Hydrogen and oxygen combine to make water
b.
Ammonia breaks up into nitrogen and hydrogen
c.
Ice melts to form water
Energy moves back and forth through the differnent ________.
please help due right now
10 POINTS
Answer:
F=ma
Explanation:
F=m×a
according to that F÷m=a and also F ÷a=m
Help Please!
Fluorine - 19
Atomic number- 9
Atomic mass - 19
Answer:
Number of protons is 9
Number of electrons is 9
Number of neutrons is 10
Explanation:
Atomic number refers to the number of protons or electrons in an atom, so the electrons and protons are 9.
Atomic mass is the sum of the number of protons and neutrons.
Therefore, there are 10 neutrons in the atom's nucleus
How does a phase change from solid to liquid occur in a substance?
A. Heat energy is released from the substance, weakening the electrical attraction between molecules.
B. Heat energy is released from the substance, strengthening the electrical attraction between molecules.
C. Heat energy is added to the substance, weakening the electrical attraction between molecules.
D. Heat energy is added to the substance, strengthening the electrical attraction between molecules.
Answer:
see below
Explanation:
1. Heat energy is added to the substance, weakening the electrical attraction between molecules.
2. Both the melting point and boiling point are lower.
3. dipole
4. Water and ethanol have different molecular structures.
5. The lone pairs of electrons in the oxygen atom causes the molecule to be bent; the oxygen atom has a partial negative charge, while the hydrogen atoms have partial positive charges.
[quizlet: captncrun]
Heat is a form factor that changes the solid from light to light to gaseous mediums. The phases take place in a cyclic manner.
The solid to liquid changes take place due to the melting or fusion, solid to gas take lace through the sublimation, liquid to gas is by vaporization, and gas to liquid is condensation. Thus the heat is added and leads to the weakening of the electrical attraction within the molecules.Hence the correct option is C.
Learn more about the phase change from solid to liquid occur in a substance
brainly.com/question/25664350.
what class of small objects have orbits completely between the gas giants, occasionally crossing their paths?
The class of small objects with orbits completely between the gas giants is centaurs.
Centaurs are a class of small tiny bodies that circles the Sun amid Jupiter as well as the Neptune, crossing the orbits of one or more of the giant planets. It has a semi-major axis, also known as perihelion, between that the outer planets.
Centaurs' orbits are often unstable since they have crossed the orbits of more than one of the gas giant planets. They are known to have the properties of asteroids and comets.
Learn more about celestial bodies here:
https://brainly.com/question/16141419?referrer=searchResults
what is the periodic trend for electronegativity
Answer:
mark me brainlest
Explanation:
Electronegativity values generally increase from left to right across the periodic table. Electronegativities generally decrease from top to bottom of a group. The highest electronegativity value is for fluorine.
Answer:
"Electronegativity increases as you move from left to right across a period because the number of charges on the nucleus increases." (sstudy30 on Quizlet)
Explanation:
It explains itself haha!
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
As part of a science experiment, Jose did a test for starch on a slice of apple and a slice of potato. The yellow-orange iodine solution stayed the same color when it was put on the apple, but it became black on the potato.
Why did the iodine solution change color on the potato?
A.
The iodine burned the potato and turned it to ash.
B.
The iodine mixed with the colors of the potato so it looked black.
C.
The iodine evaporated into a gas.
D.
The iodine reacted with the potato to form a new substance.
Answer:
d, the idiodine reacted
help asap for brainlist
Answer:
Function A: +3
Function B: +2
y intercept is greater in Function B, the value is 16
Explanation:
How does acid base extraction work.
Answer:
it can be done using the method of lithium paper
QUESTION 2
What is the pressure in atm of 0.742 mole of gas at 10.91 L and 291 K?
I
The pressure of this gas in atm is equal to 1.63 atm.
Given the following data:
Number of moles = 0.742 moleVolume = 10.91 LitersTemperature = 291 KIdeal gas constant, R = 0.0821 Latm/molKTo calculate the pressure of this gas, we would use the ideal gas law equation;
[tex]P=\frac{nRT}{V}[/tex]
Where;
P is the pressure.V is the volume.n is the number of moles of a gas.R is the ideal gas constant.T is the temperature.Substituting the given parameters into the formula, we have;
[tex]P=\frac{0.742 \times 0.0821 \times 291}{10.91} \\\\P = \frac{17.73}{10.91}[/tex]
Pressure, P = 1.63 atm.
Read more: https://brainly.com/question/25706436
What is the differences between solids liquids and gases on a molecular level apes.
LOTS OF POINTS Which statement about Fe is supported by the modern atomic theory but no John Dalton’s theory? Look at the pic provided for choices.
Answer:
https://brainly.com/question/19533453
Explanation:
This might be able to help you.
What will the particles in the tube do when the current is turned on?
Describe the procedural steps to achieve adequate separation of a homogeneous, liquid mixture containing benzoic acid, n-propylbenzene, and phenol, provided a 4:1 hexane to ethyl acetate solution as the eluent, using Thin Layer Chromatography (TLC).
n-propylbenzene will travel the largest distance because it interacts most effectively with the stationary phase followed by phenol and benzoic acid will travel the least distance because it interacts poorly with the mobile phase.
Thin layer chromatography involves the separation of a mixture using a stationary phase made of silica gel on a glass plate and an appropriate mobile phase. The extent of separation is highly dependent on the magnitude of interaction between the solute and the mobile phase. and stationary phase.
The first step in thin layer chromatography is to make a thin mark at the bottom portion of the plate then spot the plate with the sample. The mobile phase is now introduced into the TLC chamber a little below the mark. The plate is now placed in the stationary phase such that the mark is above the solvent level.
The TLC chamber is now covered and enough time is allowed for separation to occur. The spots can be seen using a suitable indicator dye or with a the aid of UV light
After the separation of a homogeneous, liquid mixture containing benzoic acid, n-propylbenzene, and phenol, provided a 4:1 hexane to ethyl acetate solution as the eluent, we can see that n-propylbenzene will travel the largest distance because it interacts most effectively with the stationary phase followed by phenol and benzoic acid will travel the least distance because it interacts poorly with the mobile phase.
Learn more: https://brainly.com/question/967776
Elements with ________________ first ionization energies and ___________ electron affinities generally form cations.
Answer:
elements with low first ionization energies and positive or slightly negative electron affinities generally form cations.
hope it is helpful:)
is it difficult or easy to obtain hydro power
Answer:yes
Explanation:
cause yes