m-3/18=11/18 What is m??

Electricity is an essential commodity in today's world. However, it comes at a cost, and the cost varies depending on the providers. In this scenario, Mr. Rokum is comparing the costs of two different electrical providers for his home. Provider A charges $0.15 per kilowatt-hour, while Provider B charges a flat rate of $20 per month plus $0.10 per kilowatt-hour.

If Mr. Rokum uses the electricity for 1000 hours in Provider A, he would pay:

Total cost = 1000 * 0.15
Total cost = $150

If Mr. Rokum uses the electricity for 1000 hours in Provider B, he would pay:

Total cost = $20 + 1000 * 0.10
Total cost = $20 + $100
Total cost = $120

As seen, Provider B is cheaper for Mr. Rokum than Provider A. Suppose Mr. Rokum uses more than 133.3 hours per month on Provider B. In that case, it is economical to use Provider B over Provider A.

Electricity bills are a significant expense for most households. However, understanding the charges and the best electricity provider for your needs can significantly reduce your energy costs. Additionally, households can also adopt energy-saving measures such as replacing bulbs with LEDs and turning off electrical appliances when not in use. In this way, households can lower their monthly bills while conserving energy and reducing their carbon footprint.

To know more about hours, click here

https://brainly.com/question/13349617

#SPJ11

The actual diameter of the gazebo is 16.8 feet and the area of the circular gazebo is approximately 221.71 square feet.

According to the given scale, 2 inches on the blueprint represents 6 feet in reality. Thus, to find the actual diameter of the gazebo, we can set up a proportion:

2 inches / 6 feet = 5.6 inches / x feet

Cross-multiplying, we get:

2 inches * x feet = 6 feet * 5.6 inches

x = (6 feet * 5.6 inches) / 2 inches

x = 16.8 feet

To find the area of the gazebo, we can use the formula for the area of a circle:

Area = πr²

Since the diameter is given, we can find the radius by dividing it by 2:

r = 16.8 feet / 2

r = 8.4 feet

Substituting the radius value into the formula for the area, we get:

Area = π(8.4 feet)²

Area ≈ 221.71 square feet

To learn more about scale click on,

https://brainly.com/question/30474672

#SPJ1

Complete question is:

The blueprint for a circular gazebo has a scale of 2 inches = 6 feet. The blueprint shows that the gazebo has a diameter of 5.6 inches. What is the actual diameter of the​ gazebo? What is its​ area? Use 3.14 for π.

The equation of the line of best fit is y = 0.2365x + 66.134, and the absolute value of the correlation coefficient is 0.197.

Given, the relationship between number of pitches and the average speed of the pitches can be shown through a scatter plot as follows. Using the given data, the scatter plot is shown below: From the graph, we observe that the points form a somewhat linear pattern.

Thus, we can add a line of best fit to the graph to understand the relationship between the two variables better. To determine the line of best fit, we will use the linear regression tool on the graphing calculator. For that, we need to select the “Relationship” tab and then select “Linear Regression” from the drop-down menu.

The equation of the line of best fit and the absolute value of the correlation coefficient are given as follows. Line of best fit: y = 0.2365x + 66.134|Correlation Coefficient| = 0.197. Therefore, the equation of the line of best fit is y = 0.2365x + 66.134, and the absolute value of the correlation coefficient is 0.197.

To know more about Equation  visit :

https://brainly.com/question/29538993

#SPJ11

Jannie's adjusted monthly pocket money can be calculated by multiplying his current pocket money (R150) by the ratio of the increase (6:5). The calculation involves finding the equivalent fraction of the ratio and multiplying it by the current pocket money.

To calculate Jannie's adjusted monthly pocket money, we need to determine the amount of increase based on the given ratio of 6:5. The ratio indicates that for every 6 parts, the pocket money increases by 5 parts.
First, we convert the ratio to an equivalent fraction. The ratio 6:5 can be written as 6/5. This fraction represents the increase in pocket money per month.
Next, we calculate Jannie's adjusted pocket money by multiplying his current pocket money (R150) by the fraction representing the increase. The calculation is as follows:
Adjusted pocket money = Current pocket money × Fraction representing the increase
= R150 × 6/5
= R180
Therefore, Jannie's adjusted monthly pocket money after the increase is R180.

Learn more about ratio here
https://brainly.com/question/13419413



#SPJ11

The radius of the frisbee is approximately 1.273 inches when the circumference is 8 inches, and we use the value of pi as 3.14.

To calculate the radius, we can use the formula that relates the circumference and radius of a circle. The formula is:

Circumference = 2 * π * radius

Where "Circumference" represents the total distance around the circle, "pi" is a mathematical constant approximately equal to 3.14, and "radius" is the distance from the center of the circle to any point on its boundary.

Now, let's solve the equation for the radius:

Circumference = 2 * π * radius

Substituting the given value of the circumference (8 inches) and the value of π (3.14) into the equation, we get:

8 = 2 * 3.14 * radius

To isolate the radius, we need to divide both sides of the equation by 2 * 3.14:

8 / (2 * 3.14) = radius

Simplifying the right side of the equation, we have:

8 / 6.28 = radius

Calculating the value on the right side, we find:

radius ≈ 1.273

To know more about circumference here

https://brainly.com/question/28757341

#SPJ4

In the given right triangle, where the length of one side is a = 7 and the length of another side is x (unknown), the task is to determine the value of tan θ. The provided answer choices are √49 - 22/7, √49 - 2/7, and √49 - 2.

Explanation:

To determine the value of tan θ, we need to use the definition of the tangent function, which is equal to the ratio of the length of the opposite side to the length of the adjacent side in a right triangle. In this case, the opposite side is a and the adjacent side is x. Therefore, tan θ = a/x.

Given that a = 7, we can substitute this value into the expression: tan θ = 7/x.

From the answer choices, we can simplify each expression to determine the correct value.

The expression √49 - 22/7 can be simplified as √27/7, which is not equal to 7/x.

The expression √49 - 2/7 can be simplified as √47/7, which is also not equal to 7/x.

The expression √49 - 2 can be simplified as √47, which is not equal to 7/x.

None of the provided answer choices is equal to the expression 7/x, which means we cannot determine the exact value of tan θ without knowing the length of the other side (x)

Learn more about tangent function here:

https://brainly.com/question/28994024

#SPJ11

we are 95% confident that the true mean difference between the amount of mail-order purchases and the amount of internet purchases lies between -$23.09 and $9.29.

Step 1: Find the critical value that should be used in constructing the confidence interval.

Since the sample sizes are small (n1=9, n2=13), we will use the t-distribution for the interval estimate. The degrees of freedom is calculated using the formula:

df = [(s1^2/n1 + s2^2/n2)^2] / [((s1^2/n1)^2)/(n1 - 1) + ((s2^2/n2)^2)/(n2 - 1)]

Plugging in the values gives:

df = [(27.75^2/9 + 25.75^2/13)^2] / [((27.75^2/9)^2)/(9 - 1) + ((25.75^2/13)^2)/(13 - 1)] ≈ 17.447

Using a t-table with 17 degrees of freedom and a confidence level of 95%, we find the critical value to be 2.110.

Step 2: Calculate the point estimate of the difference between the means.

The point estimate of the difference between the means is:

1x - x2 = $72.10 - $79.00 = -$6.90

Step 3: Calculate the confidence interval.

The formula for the confidence interval for the difference between two population means is:

(1x - x2) ± tα/2 * sqrt[s1^2/n1 + s2^2/n2]

Plugging in the values gives:

(-$6.90) ± 2.110 * sqrt[27.75^2/9 + 25.75^2/13] ≈ (-$23.09, $9.29)

Therefore, we are 95% confident that the true mean difference between the amount of mail-order purchases and the amount of internet purchases lies between -$23.09 and $9.29.

To  learn  more about amount click here:brainly.com/question/30690010

#SPJ11

The answers are as follows:

-e^(3x/4)i = -cos(3x/4) - i sin(3x/4)

e^xi = cos(x) + i sin(x)

Sie^(-π/3)i = -sin(π/3) + i cos(π/3)

Euler's formula is a fundamental mathematical relationship that connects the exponential function, trigonometric functions, and imaginary numbers. It is expressed as e^(ix) = cos(x) + i sin(x), where e is the base of the natural logarithm, i is the imaginary unit (√-1), cos(x) represents the cosine function, and sin(x) represents the sine function.

To express a complex number in the form a + bi using Euler's formula, we need to identify the real and imaginary parts of the number.

1. For -e^(3x/4)i:

2. For e^(xi):

3. For Sie^(-π/3)i:

In each case, we can express the complex number in the form a + bi, where a represents the real part and b represents the imaginary part. The angle x in the formulas can be any real number, and the resulting expressions give us the corresponding values of cosine and sine at that angle, allowing us to represent complex numbers using trigonometric functions.

To learn more about Euler's formula, click here: brainly.com/question/12274716

#SPJ11

(a) The number of standard deviations below the null value for x = 72.3 is approximately -1.21.

(b) Using α = 0.005, the conclusion is to reject the null hypothesis since the test statistic falls in the critical region. The test statistic is approximately -2.15, and the p-value is approximately 0.0161.

(a) To find the number of standard deviations below the null value for x = 72.3, we subtract the null value (73) from the observed value (72.3) and divide by the standard deviation (6). This gives us (-0.7) / 6 = -0.1167, which can be rounded to -1.21.

(b) To test the hypothesis with α = 0.005 and x = 72.3, we calculate the test statistic. The test statistic is given by (x - μ) / (σ / √n), where x is the sample mean, μ is the null value, σ is the standard deviation, and n is the sample size. Plugging in the values, we get (-0.7) / (6 / √25) = -2.15 (rounded to two decimal places).

Next, we determine the p-value associated with the test statistic. Since the alternative hypothesis is one-sided (Ha: μ < 73), we look up the p-value for -2.15 in the t-distribution with n-1 degrees of freedom. The p-value is approximately 0.0161 (rounded to four decimal places).

(c) For the test procedure with α = 0.005, we want to find the critical value at which the test statistic corresponds to a probability of α in the left tail of the t-distribution. We look up the critical value for α = 0.005 in the t-distribution with n-1 degrees of freedom. Let's denote this critical value as c. Then, we can find c such that P(T < c) = α, where T is a random variable following a t-distribution with n-1 degrees of freedom.

(d) To ensure that P(T < c) = 0.01 when α = 0.005, we need to find the sample size n. We can use the t-distribution and the critical value c from part (c) to solve for n. The equation becomes P(T < c) = 0.01 = α. By looking up the critical value c in the t-distribution table and solving the equation, we can find the required sample size n.

(e) If a level 0.01 test is used with n = 100, we want to find the probability of a Type I error when the true population mean is μ = 76. The probability of a Type I error is equal to the significance level (α) of the test. In this case, α = 0.01. Therefore, the probability of a Type I error is 0.01.

Learn more about standard deviations

brainly.com/question/29115611

#SPJ1

The proportion of time the machine is down due to a type 1 failure is given by p × (μ1 / (λ + μ1)), where p is the probability of a type 1 failure occurring, μ1 is the rate of type 1 repair time, and λ is the rate of the machine's failure time.

To calculate the proportion of time the machine is down due to a type 1 failure, we need to consider the probability of a type 1 failure occurring and the expected time it takes to repair the machine for a type 1 failure. Similarly, for the proportion of time the machine is down due to a type 2 failure, we consider the probability of a type 2 failure occurring and the expected time it takes to repair the machine for a type 2 failure.

Let T be the total time it takes for the machine to fail and be repaired. The proportion of time the machine is down due to a type 1 failure is given by p × (μ1 / (λ + μ1)) since the probability of a type 1 failure occurring is p and the expected repair time for a type 1 failure is 1 / μ1. Similarly, the proportion of time the machine is down due to a type 2 failure is given by (1 - p) × (μ2 / (λ + μ2)) where (1 - p) is the probability of a type 2 failure occurring and 1 / μ2 is the expected repair time for a type 2 failure.

The proportion of time the machine is up can be calculated by subtracting the sum of the proportions of time it is down due to type 1 and type 2 failures from 1. Therefore, the proportion of time the machine is up is given by 1 - (p × (μ1 / (λ + μ1)) + (1 - p) × (μ2 / (λ + μ2))).

Learn more about proportion here:

https://brainly.com/question/31548894

#SPJ11

The probability of getting exactly 4 aces and 3 kings is 0.000277 or approximately 0.0277%.

To find the probability of getting exactly 4 aces and 3 kings, we need to find the total number of ways to select these cards from a deck of 52 cards.

First, we need to find the total number of ways to select 13 cards from 52. This is given by the combination formula:

C(52, 13) = 52! / (13! * 39!) = 635,013,559,600

Next, we need to find the number of ways to select 4 aces and 3 kings from the deck. The number of ways to select 4 aces from the 4 available is C(4, 4) = 1. Similarly, the number of ways to select 3 kings from the 4 available is C(4, 3) = 4.

The remaining 6 cards can be selected from the remaining 44 cards in C(44, 6) ways.

Therefore, the total number of ways to select 4 aces and 3 kings in 13 cards is:

C(4, 4) * C(4, 3) * C(44, 6) = 1 * 4 * 44,049 = 176,196

Finally, we can find the probability of getting exactly 4 aces and 3 kings by dividing the number of ways to select these cards by the total number of ways to select any 13 cards from a deck:

P(exactly 4 aces and 3 kings) = 176,196 / 635,013,559,600 = 0.000277 or approximately 0.0277%.

To know more about probability, refer to the link below:

https://brainly.com/question/31955902#

#SPJ11

The area enclosed by the curve with the equation r = 1 - 0.3sin(θ) can be found by evaluating the integral of 0.5[tex](1 - 0.3sin(θ))^2[/tex] with respect to θ over the range from 0 to 2π. The exact value of this integral may require numerical methods or approximations.

To determine the range of θ values, we need to examine the curve and identify the interval over which it encloses an area. From the equation r = 1 - 0.3sin(θ), we can see that the curve forms a closed loop. The value of θ varies from 0 to 2π to complete one full loop of the curve.

Using the formula for calculating the area in polar coordinates, the enclosed area can be obtained by integrating [tex]0.5r^2[/tex]dθ over the range of θ values. In this case, we have:

Area = 0.5 ∫[0 to 2π] [tex](1 - 0.3sin(θ))^2[/tex] dθ

Evaluating this integral will give us the area enclosed by the curve.

Learn more about polar coordinates here:

https://brainly.com/question/31904915

#SPJ11

The arrow on the spinner will land on the green section approximately 100 times out of 700 spins.

To determine the number of times the arrow on the spinner will land on the green section, we need to consider the proportion of the green section on the spinner. If the spinner is divided into multiple equal sections, let's say there are 10 sections in total, and the green section covers 1 of those sections, then the probability of landing on the green section in a single spin is 1/10.

Since the arrow is spun 700 times, we can multiply the probability of landing on the green section in a single spin (1/10) by the number of spins (700) to find the expected number of times it will land on the green section. This calculation would be: (1/10) * 700 = 70.

Therefore, the arrow on the spinner will land on the green section approximately 70 times out of 700 spins.

Learn more about times here:

https://brainly.com/question/26941752

#SPJ11

A constant variable definition for pi is "a mathematical constant representing the ratio of a circle's circumference to its diameter" and to assign it a value of 3.14 the syntax is : const pi = 3.14; will assign pi a value of 3.14.

To write a constant variable definition for pi and assign it a value of 3.14,

On defined pi as a constant variable using the keyword "const," its value cannot be changed.

To learn more about variable: https://brainly.com/question/28248724

#SPJ11

The original price was $125, the discount was $43.75, and the sale price was $81.25.

We can find the discount as follows: To find the discount: Discount = Original Price - Sale Price Discount = $125 - $81.25

Discount = $43.75Therefore, the discount is $43.75

We can now find the selling price as follows: Selling Price = Original Price - Discount Selling Price = $125 - $43.75Selling Price = $81.25Therefore, the selling price is $81.25. To summarize: Original Price: $125Discount: $43.75Sale Price: $81.25The original price was $125, the discount was $43.75, and the sale price was $81.25.

To know more about Sale Price visit:

https://brainly.com/question/31104614

#SPJ11

The yield on Josef's investment in Dowc Beverage Co. is 2.08% higher for the bonds than it is for the stocks. Thus, the correct option is D.

Yield is the return on an investment over a specified period. It is often represented as a percentage of the investment's cost.

The rate of return on investment or interest earned on a security, usually expressed annually, is referred to as yield.

A dividend is a payment made by a corporation to its shareholders, usually in the form of cash or stock, to share the company's profits.

A commission is a payment made to an individual or company for services rendered.

A broker commission, also known as a brokerage fee, is the fee charged by a broker for services such as buying and selling shares on behalf of clients.

To know more about shareholders, visit:

https://brainly.com/question/28170754

#SPJ11

To prove that r is an equivalence relation, we need to show that it satisfies the following three properties: Reflexivity, symmetry and transitivity.

a) Proving reflexivity: For all m ε ℤ, we need to show that m r m, i.e., 3 | (m2 – m2) = 0.

Since 0 is divisible by 3, reflexivity holds.

b) Proving symmetry: For all m, n ε ℤ, we need to show that if m r n, then n r m. Suppose m r n, i.e., 3 | (m2 – n2).

This means that there exists an integer k such that m2 – n2 = 3k. Rearranging this equation, we get n2 – m2 = –3k.

Since –3k is also an integer, we have 3 | (n2 – m2), which implies that n r m. Therefore, symmetry holds.

c) Proving transitivity: For all m, n, and p ε ℤ, we need to show that if m r n and n r p, then m r p.

Suppose m r n and n r p, i.e., 3 | (m2 – n2) and 3 | (n2 – p2). This means that there exist integers k and l such that m2 – n2 = 3k and n2 – p2 = 3l. Adding these two equations, we get m2 – p2 = 3k + 3l = 3(k + l). Since k + l is also an integer, we have 3 | (m2 – p2), which implies that m r p.

Therefore, transitivity holds.Since r satisfies all three properties of an equivalence relation, we can conclude that r is indeed an equivalence relation.

Learn more about equivalence relation here, https://brainly.com/question/15828363

#SPJ11

Answer: It takes 30 hours using the hose alone to fill the swimming pool.

Step 1: Make denominators the same

Step 2: Add or Subtract the numerators (keeping the denominator the same)

Step 3: Simplify the fraction

To add or subtract unlike fractions, the first step is to make denominators the same so that numerators can be added just like we do for like fractions.

Let  represent the swimming pool be filled with hose alone.

Given that using the pipe alone it takes 12 hours. using both it takes 8 4/7 hours. According to given condition,

Read more on Brainly.com - https://brainly.com/question/30357423#readmore

To use the chase test, we first write out all the dependencies as implications, and then apply the rules of inference to derive new implications until we can no longer derive any more. If the dependency we are testing can be derived from the set of original dependencies, then it holds in the relation.

a) To test whether a → d holds, we first write it as an implication: a → ad. Then we apply the rule of augmentation to get a → abcde. Applying the rule of decomposition gives us a → ad, which means the dependency holds.

b) To test whether a →→ d holds, we start by writing it as two implications: a → d and ad → d. Applying the rule of transitivity gives us a → d, which means the dependency holds.

c) To test whether a → e holds, we first write it as an implication: a → ae. Then we apply the rule of augmentation to get a → abcde. Applying the rule of decomposition gives us a → ae, which means the dependency holds.

d) To test whether a →→ e holds, we start by writing it as two implications: a → e and ae → e. Applying the rule of transitivity gives us a → e, which means the dependency holds.

In conclusion, the chase test can be used to determine whether dependencies hold in a relation. By writing out the dependencies as implications and applying the rules of inference, we can derive new implications and determine whether the dependency we are testing can be derived from the original set of dependencies. In this case, we have shown that all four dependencies hold in the relation r(a, b, c, d, e).

To know more about Relation visit:

https://brainly.com/question/6241820

#SPJ11

The probability that it is not raining and the flight leaves on time at LaGuardia Airport is 0.82.

Let's denote the event that it rains as R

The event that the flight is delayed as D

The event that it is not raining as ¬R (complement of R).

We are given these probabilities:

P(R) = 0.08 (probability of rain)

P(D) = 0.14 (probability of flight delay)

P(R ∩ D) = 0.04 (probability of rain and flight delay)

The probability rules that will be used calculate the probability that it is not raining (¬R) and the flight leaves on time (¬D) is:

P(¬R ∩ ¬D) = 1 - P(R ∪ D)

= 1 - [P(R) + P(D) - P(R ∩ D)]

= 1 - [0.08 + 0.14 - 0.04]

= 1 - 0.18

= 0.82.

Read more about probability

brainly.com/question/13604758

#SPJ1

To find the surface area of a pyramid using nets with base side length of 5 units and height of 5 units, calculate the area of the base and the area of the triangular faces, then sum them up. Therefore, the surface area of the pyramid, using the given net, is approximately 68.32 square units.

To determine the surface area of a pyramid, we can use the concept of nets. A net is a two-dimensional representation of a three-dimensional shape that can be unfolded to reveal its faces. In the case of a pyramid, the net consists of a base shape and triangular faces that connect to the apex.

Given that the base side length is 5 units and the height is also 5 units, we first calculate the area of the base. Since the base is a square, the area is given by multiplying the length of one side by itself: 5 * 5 = 25 square units.

Next, we calculate the area of each triangular face. The formula for the area of a triangle is 1/2 * base * height. The base of each triangular face is the side length of the base, which is 5 units. The height can be found using the Pythagorean theorem, where one leg is half the base length and the other leg is the height of the pyramid. So the height is √(5^2 - [tex](5/2)^2) = √(25 - 6.25) = √18.75[/tex] ≈ 4.33 units. Thus, the area of each triangular face is 1/2 * 5 * 4.33 = 10.83 square units.

Finally, we sum up the area of the base and the area of the triangular faces: 25 + (4 * 10.83) = 68.32 square units. Therefore, the surface area of the pyramid, using the given net, is approximately 68.32 square units.

Learn more about Pythagorean theorem here:

https://brainly.com/question/14930619

#SPJ11

To find the surface area of a pyramid using nets with base side length of 5 units and height of 5 units, you can calculate the area of the base and the area of the triangular faces. Then, sum up these areas to determine the total surface area of the pyramid.

Let's call the vector V. We know that the magnitude of V is 3 and that its direction is 25 degrees counterclockwise from the positive x-axis.

To write V in component form, we need to determine its x- and y-components. We can use trigonometry to do this.

The x-component of V is given by Vx = V cos θ, where θ is the angle between V and the positive x-axis. We can use the fact that the direction of V is 25 degrees counterclockwise from the positive x-axis to find θ:

θ = 360 degrees - 25 degrees = 335 degrees

(Note that we add 360 degrees to 25 degrees to get an angle in the fourth quadrant, and then subtract 25 degrees to get the actual angle between V and the positive x-axis.)

Now we can use the formula Vx = V cos θ:

Vx = 3 cos 335 degrees

To evaluate this expression, we need to convert the angle to radians:

335 degrees * (π/180) = 5.85 radians

Now we can substitute and simplify:

Vx = 3 cos 5.85 ≈ -2.52

(Note that Vx is negative because the angle between V and the positive x-axis is in the fourth quadrant.)

The y-component of V is given by Vy = V sin θ. We can use the same value of θ that we found earlier:

Vy = 3 sin 335 degrees

Converting to radians:

335 degrees * (π/180) = 5.85 radians

Substituting and simplifying:

Vy = 3 sin 5.85 ≈ -0.88

Therefore, the vector V in component form is:

V = (-2.52, -0.88)

To learn more about vector in component form refer below

https://brainly.com/question/25737181

#SPJ11

The height of the cylinder is approximately 2.93 cm.

We can use the formula for the volume of a cylinder which is given as:

V = π[tex]r^2h[/tex]

where V is the volume, r is the radius of the circular base, h is the height of the cylinder and π is the mathematical constant pi.

We are given that the area of each base is 124 cm^2, which means that πr^2 = 124. Therefore, the radius of the circular base can be found as:

r^2 = 124/π

r ≈ 6.28 cm (rounded to 2 decimal places)

The volume of the cylinder is given as 116π [tex]cm^3[/tex]. Substituting the values of r and V in the formula, we get:

116π = π[tex](6.28)^2h[/tex]

Simplifying the equation:

116 = [tex](6.28)^2h[/tex]

h =[tex]116/(6.28)^2[/tex]

h ≈ 2.93 cm (rounded to 2 decimal places)

Therefore, the height of the cylinder is approximately 2.93 cm.

In conclusion, we can find the height of a cylinder by using its volume and the area of its base by plugging the values in the formula for the volume of a cylinder. In this problem, the height of the cylinder is approximately 2.93 cm.

For such more questions on cylinder

https://brainly.com/question/23935577

#SPJ8

a) Type I error.

To know more about null hypothesis refer here:

https://brainly.com/question/28920252

#SPJ11

The probability that less than 15% of the individuals in a sample of size 1000 hold multiple jobs is approximately 0.0418 or 4.18%.

To solve this problem, we need to use the binomial distribution formula:

P(X = k) = (n choose k) * p^k * (1-p)^(n-k)

where X is the number of individuals who hold multiple jobs in a sample of size n, p is the probability that an individual in the population holds multiple jobs (0.12), and (n choose k) is the binomial coefficient.

The probability that less than 15% of the individuals hold multiple jobs is equivalent to the probability that X is less than 0.15n:

P(X < 0.15n) = P(X ≤ ⌊0.15n⌋)

where ⌊0.15n⌋ is the greatest integer less than or equal to 0.15n.

Substituting the values we have:

P(X ≤ ⌊0.15n⌋) = ∑(k=0 to ⌊0.15n⌋) (n choose k) * p^k * (1-p)^(n-k)

We can use a calculator or software to compute this sum. Alternatively, we can use the normal approximation to the binomial distribution if n is large and p is not too close to 0 or 1.

Assuming n is sufficiently large and using the normal approximation, we can approximate the binomial distribution with a normal distribution with mean μ = np and standard deviation σ = sqrt(np(1-p)). Then we can use the standard normal distribution to calculate the probability:

P(X ≤ ⌊0.15n⌋) ≈ Φ((⌊0.15n⌋+0.5 - μ)/σ)

where Φ is the cumulative distribution function of the standard normal distribution.

For example, if n = 1000, then μ = 120, σ = 10.9545, and

P(X ≤ ⌊0.15n⌋) ≈ Φ((⌊0.15*1000⌋+0.5 - 120)/10.9545) = Φ(-1.732) = 0.0418

Therefore, the probability that less than 15% of the individuals in a sample of size 1000 hold multiple jobs is approximately 0.0418 or 4.18%.

Learn more about probability here

https://brainly.com/question/13604758

#SPJ11

To solve this problem, we need to subtract the depth at which the dolphin is located from the sea level.What is a depth?Depth refers to the distance from the surface to the bottom of a body of water or any other object.

To put it another way, depth is a measurement of distance from the surface of something downward or inward.For example, when an object, say a Dolphin, is at a depth of 45 3/4 feet relative to sea level, how many feet has it descended from sea level?We must perform the following calculation to get our answer:45 3/4 feetSo, the dolphin has descended 45 3/4 feet from sea level.

To know more about distance, visit:

https://brainly.com/question/13034462

#SPJ11

Betty will have 10 bracelets of blue shiny round stones.

Given the following:

Betty brought 140 shiny blue round stones which cost 8 dollars.

We have a total of 140 blue round stones.There are 14 pieces of stones in each bracelet, so we will divide the total number of stones by the number of stones per bracelet to determine the number of bracelets.

There are 140 / 14 = 10 bracelets made from blue shiny round stones.

Therefore, there will be 10 bracelets of blue shiny round stones.

In conclusion, there will be 10 bracelets of blue shiny round stones with the given details.

Know more about bracelets  here,

https://brainly.com/question/16898240

#SPJ11

To find the inverse of the function f(x) = 3√(6x), we can follow these steps:

Step 1: Replace f(x) with y: y = 3√(6x).

Step 2: Swap the variables x and y: x = 3√(6y).

Step 3: Solve for y in terms of x. To do this, we'll isolate the radical term:

x = 3√(6y)

x/3 = √(6y)

(x/3)^2 = 6y

(x^2)/9 = 6y

y = (x^2)/54

Step 4: Replace y with ƒ^(-1)(x): ƒ^(-1)(x) = (x^2)/54.

Therefore, the inverse function of f(x) = 3√(6x) is ƒ^(-1)(x) = (x^2)/54.[tex][/tex]

If the number of years that a computer lasts has density f(x) = { s 8x if x > 2 otherwise. 0, then (a) the probability that the computer lasts between 3 and 5 years is 64, (b) the probability that the computer lasts at least 4 years is 1 (or 100%), (c) the probability that the computer lasts less than 1 year is 4, (d) the probability that the computer lasts exactly 2.48 years is 0., and (e) the number of years that the computer lasts is undefined.

To find the probabilities and expected value, we need to integrate the given density function over the respective intervals. Let's calculate each part step by step:

a) Probability that the computer lasts between 3 and 5 years:

To find this probability, we need to integrate the density function f(x) over the interval [3, 5]:

P(3 ≤ x ≤ 5) = ∫[3,5] f(x) dx

Since the density function f(x) is defined piecewise, we need to split the integral into two parts:

P(3 ≤ x ≤ 5) = ∫[3,5] f(x) dx

= ∫[3,5] 8x dx (for x > 2)

= ∫[3,5] 8x dx

= [4x^2]3^5

= 4(5^2) - 4(3^2)

= 4(25) - 4(9)

= 100 - 36

= 64

Therefore, the probability that the computer lasts between 3 and 5 years is 64.

b) Probability that the computer lasts at least 4 years:

To find this probability, we need to integrate the density function f(x) over the interval [4, ∞):

P(x ≥ 4) = ∫[4,∞) f(x) dx

Since the density function f(x) is defined piecewise, we need to split the integral into two parts:

P(x ≥ 4) = ∫[4,∞) f(x) dx

= ∫[4,∞) 8x dx (for x > 2)

= ∫[4,∞) 8x dx

= [4x^2]4^∞

= ∞ - 4(4^2)

= ∞ - 4(16)

= ∞ - 64

= ∞

Therefore, the probability that the computer lasts at least 4 years is 1 (or 100%).

c) Probability that the computer lasts less than 1 year:

To find this probability, we need to integrate the density function f(x) over the interval [0, 1]:

P(x < 1) = ∫[0,1] f(x) dx

Since the density function f(x) is defined piecewise, we need to split the integral into two parts:

P(x < 1) = ∫[0,1] f(x) dx

= ∫[0,1] 8x dx (for x > 2)

= ∫[0,1] 8x dx

= [4x^2]0^1

= 4(1^2) - 4(0^2)

= 4(1) - 4(0)

= 4 - 0

= 4

Therefore, the probability that the computer lasts less than 1 year is 4.

d) Probability that the computer lasts exactly 2.48 years:

Since the density function f(x) is defined piecewise, we need to check whether 2.48 falls into the range where f(x) is nonzero. In this case, it does not since 2.48 ≤ 2. Therefore, the probability that the computer lasts exactly 2.48 years is 0.

e) Expected value of the number of years that the computer lasts:

The expected value, E(X), can be calculated using the formula:

E(X) = ∫(-∞,∞) x * f(x) dx

For the given density function f(x), we can split the integral into two parts:

E(X) = ∫[2,∞) x * f(x) dx + ∫(-∞,2] x * f(x) dx

First, let's calculate ∫[2,∞) x * f(x) dx:

∫[2,∞) x * f(x) dx = ∫[2,∞) x * (8x) dx (for x > 2)

= ∫[2,∞) 8x^2 dx

= [8(1/3)x^3]2^∞

= lim(x→∞) [8(1/3)x^3] - (8(1/3)(2^3))

= lim(x→∞) (8/3)x^3 - 64/3

= ∞ - 64/3

= ∞

Next, let's calculate ∫(-∞,2] x * f(x) dx:

∫(-∞,2] x * f(x) dx = ∫(-∞,2] x * (s) dx (for x ≤ 2)

= 0 (since f(x) = 0 for x ≤ 2)

Therefore, the expected value of the number of years that the computer lasts is undefined (or infinite) in this case.

Learn more about density function:

https://brainly.com/question/30403935

#SPJ11

The Taylor polynomials T2 and T3 centered at x = 5 for the function f(x) = x^4 - 2x are T2(x) = 545 + 190(x - 5) + 150(x - 5)^2 and T3(x) = 545 + 190(x - 5) + 150(x - 5)^2 + 120(x - 5)^3.

a) For the function f(x) = sin(x), the Taylor polynomials T2 and T3 centered at a = 0 can be calculated as follows:

The Taylor polynomial of degree 2 for f(x) = sin(x) centered at x = 0 is:

T2(x) = f(0) + f'(0)x + (f''(0)/2!)x^2

= sin(0) + cos(0)x + (-sin(0)/2!)x^2

= x

The Taylor polynomial of degree 3 for f(x) = sin(x) centered at x = 0 is:

T3(x) = f(0) + f'(0)x + (f''(0)/2!)x^2 + (f'''(0)/3!)x^3

= sin(0) + cos(0)x + (-sin(0)/2!)x^2 + (-cos(0)/3!)x^3

= x - (1/6)x^3

Therefore, the Taylor polynomials T2 and T3 centered at x = 0 for the function f(x) = sin(x) are T2(x) = x and T3(x) = x - (1/6)x^3.

b) For the function f(x) = x^4 - 2x, the Taylor polynomials T2 and T3 centered at a = 5 can be calculated as follows:

The Taylor polynomial of degree 2 for f(x) = x^4 - 2x centered at x = 5 is:

T2(x) = f(5) + f'(5)(x - 5) + (f''(5)/2!)(x - 5)^2

= (5^4 - 2(5)) + (4(5^3) - 2)(x - 5) + (12(5^2))(x - 5)^2

= 545 + 190(x - 5) + 150(x - 5)^2

The Taylor polynomial of degree 3 for f(x) = x^4 - 2x centered at x = 5 is:

T3(x) = f(5) + f'(5)(x - 5) + (f''(5)/2!)(x - 5)^2 + (f'''(5)/3!)(x - 5)^3

= (5^4 - 2(5)) + (4(5^3) - 2)(x - 5) + (12(5^2))(x - 5)^2 + (24(5))(x - 5)^3

= 545 + 190(x - 5) + 150(x - 5)^2 + 120(x - 5)^3

Therefore, the Taylor polynomials T2 and T3 centered at x = 5 for the function f(x) = x^4 - 2x are T2(x) = 545 + 190(x - 5) + 150(x - 5)^2 and T3(x) = 545 + 190(x - 5) + 150(x - 5)^2 + 120(x - 5)^3.

Learn more about Taylor polynomials here

https://brainly.com/question/30074851

#SPJ11