Answer:
0.66g/mL
Explanation:
La densidad es una propiedad de la materia definida como la masa de una sustancia en un determinado volumen.
En este problema, podemos hallar la densidad sabiendo que la diferencia de masas del pic vacío y el pic lleno es la masa de la solución y que el volumen que ocupa es de 25mL:
Masa solución:
25g - 8.5g = 16.5g
Así, la densidad será:
16.5g / 25mL =
0.66g/mLWhen dissolved in water all acids will???
Answer:
When dissolved in water, acids donate hydrogen ions (H+). Hydrogen ions are hydrogen atoms that have lost an electron and now have just a proton, giving them a positive electrical charge. Bases, on the other hand, mixed with water yield hydroxide ions (OH-). If a solution has a high concentration of H+ ions, then it is acidic.
Explanation:
So b
how many atoms are there in 6 molecules of water
Answer:
three atoms = 1 water molecule
3 × 6 = 18 atoms
................
Which of the following is not a type of mechanical wave?
Question 3 options:
surface
concave
transverse
longitudinal
Answer:
concave
Explanation:
An artificial vesicle containing a 1 M glucose solution is composed of a phospholipid bilayer lacking any protein components other than aquaporin channels. Assuming an ideal solution, what is the ratio of the osmotic pressure measured immediately after immersion of the vesicle in de-ionized water to the osmotic pressure measured immediately after immersion of an identical vesicle containing the original volume of 1 M glucose solution added to an equal volume of 1 M KCl solution in deionized water
Answer:
A: 0.67
The situation described in the question is analogous to a semipermeable membrane. Water is able to pass through aquaporin channels present in the liposome, but large uncharged particles (glucose) and ions (K+ and Cl -) are impermeable and will remain trapped within the liposome. If assumed to be ideal, the osmotic pressure, π, exerted by the solution due to molarity differences across the membrane is defined as π = iMRT, where i is the van't Hoff factor, M is the molarity of the solution, R is the universal gas constant, and T is the absolute temperature of the solution. A change in osmotic pressure at constant temperature is due to changes in iM, a term that is equivalent to the concentration of dissolved particles produced by solute in solution. When compared to the original volume of 1 M glucose, the new combined solution has twice the volume and three times the number of dissolved particles (1 M KCl, a strongly electrolytic solution, produces 1 M concentrations of both K+ and Cl- in solution), or an increase in the concentration of dissolved particles by a factor of 1.5. This is equivalent to a combined molarity of dissolved particles of 1.5 M. The ratio of osmotic pressure is then [1 M dissolved glucose] / [1.5 M dissolved glucose + KCl] = 0.67
Explanation:
18.
react to cause chemical reactions
Protons
Neutrons
Electrons
Present in a state where it molecules are far apart during a change of state it's molecules slow down which change of state has most likely taken place from a gas to a liquid from a liquid to a gas from a solid to a liquid from a gas to a plasma
Answer:
The change of state that has occurred is from a gas to a liquid
Note: The question is incomplete. The complete question is given blow.
H₂O is initially present in a state where its molecules are far apart. During a change of state, its molecules slow down. Which change of state has most likely taken place?
from a gas to a liquid
from a liquid to a gas
from a solid to a liquid
from a gas to a plasma
Explanation:
Water can exists in three states: as gaseous water vapor, as liquid water, and as solid ice. Each of these states of water can be interconverted from one to another by the addition or removal of heat in a process known as change of state.
Liquid water can be converted to solid ice by the removal of heat, while solid ice ice can be converted to liquid water by the addition of heat. Also, liquid water can be converted to water vapor by the addition of heat, while water vapor can be converted to liquid water by the removal of heat.
Of the three states of water, the one in which the molecules are farthest apart is in the gaseous state. The molecules have high kinetic energy and move randomly while colliding with one another. When a heat is removed from these highly energetic molecules, the molecules slow down and lose some of their kinetic energy and a change of occurs from gaseous to liquid state.
Therefore, the change of state that occurred as described, is from gas to liquid.
What is a fault, and how does the existence of faults support the theory of plate tectonics?
“Many of the objections are long standing but apparently unknown to many geophysicists, while some are peculiar to the new global tectonics. The conclusions drawn, in order of probability, are (1) the continents have almost certainly not moved with respect to each other; (2) convection is not active throughout the whole mantle; (3) even if convection is active in the upper mantle it cannot account for drift; (4) pole positions derived from paleomagnetism, and results of this method of investigation in its global form generally, are afflicted with an unknown cause of error and are in any case too inexact for drift reconstructions.”
(Wesson, 1972)
click on the picture of the flowers until their colors correspond to the punnett square above. HELP PLZ!
Answer:
You will need to have a red flower in the top left, a pink flower in the top right and bottom left, and a white flower in the bottom right.
Explanation:
This flower appears to express color through codominance, which means that both genes express themselves. "R" is the dominant gene for red, and "r" is the recessive gene for white. When a flower has RR genotype, the phenotype will be a red flower. When a flower has an Rr genotype, the red and white genes will both be expressed and the phenotype will be pink. When a flower has an rr genotype, it lacks the red gene and will therefore be only white.
how many mols are in 100.g of Fe?
Answer:
1.79 moles
Explanation:
1.79 moles
1.79 moles
1.79 moles
1.79 moles
Answer:1.79 moles
1.79 moles are there in 100g of iron.
Explanation:
thats the answer for it
What is the empirical formula a for a compound that is 15.3% magnesium, 44.5% chlorine, and 40.2 % oxygen
Answer:
[tex]MgCl_{2} O_{4}[/tex]
Explanation:
When calculating an empirical formula from percentages, assume you have a 100g sample. This allows you to convert the percentages directly to grams, because X % of 100g is X grams.
So:
15.3 % = 15.3g Mg, 44.5% = 44.5g Cl, 40.2% = 40.2g O
The next step is to divide each mass by their molar mass to convert your grams to moles.
15.3/24.3 = .630 mol
44.5/35.5 = 1.25 mol
40.2/16.0 = 2.5 mol
Then you will divide all of your mol values by the SMALLEST number of moles. This gives you whole numbers that are the mole ratio (subscripts) of the empirical formula.
.630 mol/.630mol = 1
1.25 mol/.630mol = 2
2.5 mol/.630mol = 4
So the empirical formula is
[tex]MgCl_{2} O_{4}[/tex]
PLZ HELP PPPLLLLLZZZZ HELP ITS OVER DUE PPPPPPPPPPPLLLLLLLLLLLLLLLLLLLLZZZZZZZZZZZ
Answer:
you didnt put a question lol
Explanation:
Answer:
help with what?
EXPLANATION:
How do the valency and the atomic size of the element vary while going from left to right along a period in The modern periodic table?
Answer:
Atomic size decreases on going along a period from left to right because the electron enters into the same shell, therefore, attraction between nucleus and outermost electron increases and thus atomic size decreases. Valency first increases from 1 to 4 and then decreases from 4 to GO along a period from left to right.
Answer:
kha gya vo chasmis ........
Which of the following describes how covalent
compounds differ from ionic compounds?
A. ionic bonds form between non metals only. B. ionic bonds are more likely to be gas. C. covalent bonds have a lower melting and boiling point. D. covalent bonds are more likely to be solids
Answer: The answer is C
covalent bonds have a lower melting and boiling point
HOPE THIS HELPS !! IF YOU NEED MORE HELP FEEL FREE TO COMMENT IN THE COMMENT SECTION
NEED HELP ASAP!!!!
Which process do scientists think provided Earth with an oxygen-rich atmosphere?
radiometric dating
spontaneous generation
photosynthesis
respiration
Answer:
photosynthesis
Explanation:
took the test
A tank contains helium gas at 585 mmHg, nitrogen gas at 0.76 atm, and neon at 940 torr. What is the total pressure
Answer:
2.77 atm
Explanation:
The total pressure of a mixture of gases is calculated as the addition of the partial pressures of the gases. In this case, the total pressure (Pt) is calculated from the partial pressures of helium (PHe), nitrogen (PN₂) and neon (PNe):
Pt = PHe + PN₂ + PNe
First, we have to convert the partial pressures to the same unit (atm). For this, we have to know that 1 atm=760 mmHg=760 Torr
PHe = 585 mmHg x 1 atm/760 mmHg = 0.77 atm
PN₂= 0.76 atm
PNe= 940 Torr x 1 atm/760 Torr = 1.24 atm
Finally, we calculate the total pressure in atm:
Pt = 0.77 atm + 0.76 atm + 1.24 atm= 2.77 atm
Some elements exhibit high electrical
conductivity. How would you expect
them to be characterized?
Answer:
Metal
Explanation:
A student wanted to study the effect of temperature on algae levels in a
local stream. Which items are most useful for gathering data and most
appropriate for communicating the results of her observations?
Select one:
Microscopes and written descriptions of weather patterns
Research on the Internet and videotapes of water samples
pH strips and written observations of stream water
Test tubes, thermometers, and graphs of results
Answer:
pH strips and written observations of stream water
Explanation:
When u place an iron nail in basin of water and leave it for two days what is formed in the iron nail
Answer:
When you place an iron nail in a basin of water and leave it for two days, what will happen to the iron nail? It will form rust on the surface of the nail. Rust forms when iron combines with oxygen to form iron oxide.
Explanation:
Assuming they were clean of rust to begin with, and are made of an ordinary steel - they start to rust - will turn orange, and the orange sediment...
Not much if any while it's in the water for that period of time. However once you remove it then it will be exposed two oxygen and will start to ox...
If it is not coated properly It will form Rust .
3. Matter with a composition that is always the same is a(n)
substance
mixture
compound
Answer:
substance
Explanation:
A pure substance is a form of matter that has a constant composition (meaning it's the same everywhere) and properties that are constant throughout the sample (meaning there is only one set of properties such as melting point, color, boiling point, etc
Torn paper vs burned paper?
Coloring leaves in a coloring book vs leaves turning colors during fall and winter?
Describe the physical and chemical changes of each......
Answer:
physical- torn paper, coloring leaves in a coloring book
chemical- burned paper, leaves turning colors during fall and winter
Explanation:
Determine the rate of a reaction that follows the rate law:
rate = k[A]”[B]", where:
k= 1 x 10-2
[A] = 2 M
[B] = 3 M
m = 2
n = 1
A. 0.12 (mol/L)/S
B. 0.36 (mol/L)/S
C. 0.06 (mol/L)/s
D. 6.0 (mol/L)/S
Please help me with this homework
Which of the following is a reasonable way of describing the density of a gas at STP
Answer:the answer is a
Explanation:
The density of a gas at standard temperature and pressure conditions is 1.40 grams per liter.
What are standard temperature and pressure conditions?Standard temperature and pressure are defined as a standard set of conditions required for experimental measurements which are established to allow comparison between different sets of data.
Standards which are commonly used are those International Union of pure and applied chemistry and national institute of standards and technology.These are not universally accepted standards but are the ones which are commonly used.
Standard conditions of pressure and temperature are necessary to define standard reference conditions used to express volumes of liquids and gases.These values are important to physicists, chemists ,engineers ,pilots and navigators.
Learn more about standard temperature and pressure,here:
https://brainly.com/question/29129606
#SPJ5
as the temperature in a pressure cooker rose from 383 k to 431 k, the pressure rose to 1.16 atm. what was the original pressure of the cooker? plz name the gas law as well
Answer:
1.031atm
Explanation:
what is the grams of molar mass of magnesium
Answer:
4.0359398 × 10^-23 g
Explanation:
All explanations or thoughts led to that answer
which alkaline earth metal is a component of gypsum
Answer:
calcium is the correct answer :)
Difference between modern periodic table and medeelves periodic table
Answer:
The main difference between Mendeleev and Modern Periodic Table is that Mendeleev’s periodic table orders the elements based on their atomic mass whereas Modern periodic table orders the elements based on their atomic number.
Explanation:
True or false force cannot be measured
Answer:
False
Explanation:
Answer:
true
Explanation:
i dont know if you want more info on how it is true just tell me if you do and i will add it in
How do I balance Ga(NO3)3 + Hg2(Cl2) -> Hg2(NO3)2 + Ga(Cl)3
Answer:
2Ga(OH)3 + 3Hg2Cl2 → 6Hg(OH) + 2GaCl3
Explanation:
Answer: 2Ga(OH)3 + 3Hg2Cl2 → 6Hg(OH) + 2GaCl3
reaction type: Double Displacement
please help and show work
What is the volume of 5.7 moles of Hydrogen gas?