look at the picture ​

Answer:

Alright the very first thing you need to do is balance the equation:

2HCl + Na2CO3 -----> 2NaCl + CO2 + H2O

Now we need to find the limiting reactant by converting the volume to moles of both HCl and Na2CO3.

Volume x Concentration/molarity = moles

0.235L x 0.6 M = 0.141 moles / molar ratio of 2 = 0.0705 moles of HCl

0.094L x 0.75 M = 0.0705 moles /molar ratio of 1  = 0.0705 moles of Na2CO3

Since both of the moles are equal, it means the entire reaction is complete (while the identification of limiting reactant may seem like an unnecessary step, it's quite essential in stoichiometry, so keep an eye out) and there is no excess of any reactant.

Now we know that the product we want to calculate is aqueous so, following the law of conservation of mass, we should add both volumes together to calculate how much volume we could get for NaCl.

0.235 + 0.094 = 0.329L of NaCl

Now we apply the C1V1 = C2V2 equation using the concentration and volume of Na2CO3 because it's molar ratio is one to one to NaCl (You can also use HCL, but you have to divide their moles by 2 for the molar ratio)  and the volume we just calculated for NaCl.

(0.75M) x (0.094L) = C2 x (0.329L)

Rearrange equation to solve for C2:

(0.75M) x (0.094L)  =  C2

    (0.329L)

C2 = 0.214 M (Rounded)

When the reaction is finished, the NaCl solution will have a molarity concentration of 0.214 M.

The strongest intermolecular bonding in ethanol is hydrogen bonding.

Intermolecular forces are the forces that hold two molecules of a substance together in a given state of matter. For ethanol, the strongest intermolecular force is hydrogen bonding.

Hydrogen bonding occurs when hydrogen is directly linked to a highly electronegative element such as oxygen, nitrogen, fluorine or sulfur. The existence of intermolecular hydrogen bonds accounts for unusual properties such as abnormally high melting and boiling points.

Learn more about intermolecular forces: https://brainly.com/question/17111432

Answer: Test a sixth liquid to see if it follows patterns in the rest of the data.

Explanation:

took the test

Temperature measures the average kinetic energy of particles of the substances. Therefore, the correct option is option A.  Temperature is a physical quantity.

Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.

Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Heat always flow from higher temperature source to lower temperature source.

We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:

°C={5(°F-32)}÷9

The boiling points of five liquids have been measured 10 times each by a team of scientists, with fairly consistent results. the next step would be to  Test a sixth liquid to see if it follows patterns in the rest of the data.

Therefore, the correct option is option A.

To know more about temperature, here:

https://brainly.com/question/13694966

#SPJ2

Answer:

there are 7. 505 x 1022 atoms in 3.5 grams of silicon.

Explanation:

So, 1 mole of silicon will have a mass of 28.0855 g and the number of atoms will be 6.022 x 1023. Therefore, there are 7. 505 x 1022 atoms in 3.5 grams of silicon.

Answer:

1 mole of silicon will have a mass of 28.0855 g and the number of atoms will be 6.022*1023 . Therefore , there are 7.505*1022 atom in 3.5 g of silicon .

Explanation:

download the app topper

[tex]\rule{2000pt}{1000000pt}[/tex]

mamama

Answer:

Chlorine

Explanation:

Chlorine has a valence shell of 7 electrons and chlorine is smaller in size, so it has a stronger pull/attraction on the electrons than Silicon.

The statements which accurately describe the particles in differing states include:

Gases have the greatest kinetic energy which explains why its particles

move very rapidly and randomly when compared to other states of matter.

Conversion from solid to liquid or liquid to gas requires more energy being

added.

The particles in solids are tightly packed with very restricted movements

which is why they are able to vibrate at a place.

Read more about Matter on https://brainly.com/question/3998772

The line spectra of an atom offers conclusive evidence that electron energies are quantized.

Neils Bohr showed that electrons in an atom can absorb or emit energy when they move from one energy level to another. This principle is the basis upon which the spectra of atoms is built.

The true statements about the atomic spectra is;

Learn more about atomic spectrum: https://brainly.com/question/2049494

Answer:

B

17.6%

Explanation:

1. Percentage yield = (Actual yield/theoretical yield) x 100

2. You know actual yield of ammonia (60kg) so you need to work out theoretical yield.

3. mols of hydrogen = m/mr = 60,000/2 = 30,000 mols.

4. 3:2 ratio so (30,000/3) x 2 = 20,000 mols of Ammonia.

5. Therefore mass of ammonia = mr x mols = 20,000 x 17 = 340,000 grams

6. So percentage yield is (60,000/340,000) x 100 = 17.6

Answer:

You can't convert km to seconds because they are different units.

Its A. Explanation:I just know

Answer:

Answer temperatures gram is correct because there is more of a mass of numbers and the numbers are higher. (don't really know this subject, just guessing, hope this helped.)

The substance A has higher solubility then substance B because the higher the temperature the easier the substance will dissolve.

The word solubility is defined as the ability of a substance, the solute, to form a solution with another substance, the solvent.

It can also be defined as a property that allow sugar molecule to dissolve.

It can be defined as at a given temperature, the amount of solute that can dissolve in a given amount of solvent.

In this reaction, increasing the pressure and temperature results in increased solubility. An increase in pressure causes more gas particles to enter the liquid, lowering the partial pressure.  

For exothermic reaction the temperature increases with decrease in solubility and for endothermic reaction the temperature decreases with increase in solubility.

Thus, the substance A has higher solubility then substance B because the higher the temperature the easier the substance will dissolve.

To learn more about solubility, refer to the link below:

https://brainly.com/question/8591226

#SPJ5

Answer: They are arranged by atomic number.

Answer:

it'll halve

Explanation:

the gas is compressed with twice the pressure. The volume will be halved.

im certain

Answer:

please mark brainliest

Explanation:

The correct answer to this question is 0.2500 mol

Formula to calculate moles:

Moles = mass ÷ molar mass (n=m/M)

Mass = 50.15g

Atomic mass: 200.59 amu

Moles = 50.15g/200.59

= 0.2500 mol.

Answer:

No, ionic compounds are crystals of infinite cations and anions bound together. There is no “molecule” of ionic compounds such as, for example, NaCl, because there are no single units of the compound.

Explanation:

Ionic compounds are not considered to be molecules because they do not consist of discrete, covalently bonded units like molecules.

In ionic compounds, the bonding occurs through the transfer of electrons from one atom to another, resulting in the formation of ions. These ions are held together by strong electrostatic attractions, known as ionic bonds.

Unlike molecules, which are formed by the sharing of electrons in covalent bonds, ionic compounds do not have individual units with fixed numbers of atoms. Instead, they exist as a three-dimensional lattice structure composed of alternating positive and negative ions. The ions are arranged in a repeating pattern throughout the crystal lattice.

Learn more about Ionic compounds, here:

https://brainly.com/question/30420333

#SPJ6

Answer:

Thomson  placed two magnets on either side of the tube, and observed that this magnetic field also deflected the cathode ray. The results of these experiments helped Thomson determine the mass-to-charge ratio of the cathode ray particles, which led to a fascinating discovery, minus the mass of each particle was much, much smaller than that of any known atom. Thomson repeated his experiments using different metals as electrode materials, and found that the properties of the cathode ray remained constant no matter what cathode material they originated from. From this evidence, Thomson made the following conclusions:

The cathode ray is composed of negatively-charged particles.

The particles must exist as part of the atom, since the mass of each particle is only ~1/2000 the mass of a hydrogen atom.

These subatomic particles can be found within atoms of all elements.

While controversial at first, Thomson's discoveries were gradually accepted by scientists. Eventually, his cathode ray particles were given a more familiar name: electrons. The discovery of the electron disproved the part of Dalton's atomic theory that assumed atoms were indivisible. In order to account for the existence of the electrons, an entirely new atomic model was needed.

Explanation:

Answer:

Matter

Explanation:

Solids, liquids, and gases are the three types of matter that can be found in the world around us today. In solids, all of the particles are close together. They move more in liquids, but they are spread out in gas.

Answer:  For the reaction, K c = 255 at 1000 K. If a reaction mixture initially contains a CO concentration of 0.1550 M and a Cl 2 concentration of 0.171 M at 1000 K. 1.

Explanation:

Answer:

92.01 g/mol

Explanation:

So first you need to find the empirical formula by the percents. That would be, assuming that you have 100 grams of the the sample, divide each quantity of each element found by its respective molar mass.

30.4 g of N ÷ 14 g/mol N= 2.17 mol of N

69.6 g of O ÷ 16g/mol= 4.35 mol of O

You can establish now the empirical formula.

N2.17O4.35,

but since you can't have a decimal subscript, you divide each subscript by the minimum subscript

NO2

So then you're said that the molecular formula derived from that empirical formula has 2 nitrogen, so you multiply all the subscripts, by 2:

N2O4

-Dinitrogen Tetraoxide

-Nitrogen oxide (IV)

Then all you have to do is find the molecular mass of the compound using the periodic table and what you obtain is the molar mass.

remember: molecular mass is correspondent to molar mass.

Answer:

helium and hydrogen make up the first of these

the answer is period

Answer:

0.5474

Explanation:

3.22 x 0.17

     \/

322 x 17 = 5,474

[] There are four places "after" the decimal in 3.22 and 0.17 combined, meaning we move the decimal to the right four times in our current answer

-> 5,474 becomes 0.5474

Have a nice day!

     I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

Answer:0.55

Explanation:

3.22 × 0.17 calculated with significant figures is 0.55, which has 2 sig figs and 2 decimals. There are 2 steps to calculate 3.22 × 0.17 with sig figs. 0.55 rounded to 1 sig figs is 0.6.

Answer:

A substance may undergo phase change from a solid to a gas or from a gas to a solid if the temperature it is exposed to is changed very quickly. If the temperature around a solid is raised very quickly, it can sublimate, or phase change from a solid to a gas without existing as a liquid.

Explanation:

Answer: Molar masses 40.8 and 100.1

Explanation: