____ KClO3 = ____ KCl + ____ O2

Answers

Answer 1

Answer:

2KCIO3=2KCI+3O2

Explanation:

1. equalize right side O with left side O- Right side we have 3 and left only 2 so we add 3 in front(on left side)(3*2=6 O on both sides)

2.we add 2 on right side so now we have 6 O on left and 6 O on right and 2KCI

3.Add 2 on right side KCI so on both sides we got 2 KCI


Related Questions

Write both the complete electron-configuration notation and the noble-gas notation for a barium atom. ​

Answers

Answer:

Explanation:

Noble gas notation: [Xe] 6s2

Complete Electron Configuration: 1s22s22p63s23p63d104s24p64d105s25p66s2.

(ik kinda hard to understand but i looked it up ant it works)

Answer:

Complete Electronic Configuration:

1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁶6s²

Electronic Configuration in Noble Gas Notation:

[Xe] 6s²

The lewis dot notation for two atoms is shown. What is represented by this notation? K loses one portion to CI, K gains one portion from CI, K loses one electron to CI, K gains one electron from CI

Answers

Answer:

K loses one electron to CI

Explanation:

The lewis electron dot notation shows only the chemical symbol of the element surrounded by dots to represent the valence electrons.

  We have atom of K with one valence electrons

   Cl with 7 valence electrons

For an electrostatic attraction to occur, both particles must be charged. To do this, one of the species must lose an electron, and the other gains it.

This will make both species attain a stable octet;

   Hence, K will lose 1 electron and Cl will gain the electrons.

Answer:

C: K loses one electron to CI

Explanation:

I took the test and got it correct!!

determine the total amount of heat, in joules, required to completely vaporize a 50.0 gram sample of H20 at its boiling point at standard pressure

Answers

Answer: 1.13 x 10^5

Explanation:

What processes are related to metamorphism

Answers

Answer:

Metamorphism is the change of minerals or geologic texture (distinct arrangement of minerals) in pre-existing rocks (protoliths), without the protolith melting into liquid magma (a solid-state change). The change occurs primarily due to heat, pressure, and the introduction of chemically active fluids.

Explanation:

i hope this helps :)

Complete the reactions of Sn(II) and Sn(IV), and be sure that the reactions are balanced. Do not include the phases (liquid, aqueous, etc.). If no reaction occurs, leave the products side of the equation
completed reaction: SnBr2+PbBr4⟶
completed reaction: SnBr4+PbBr2⟶
Select the statements that are true about the reactions.
A. PbBr4 is more stable than PbBr2.
B. The inert‑pair effect renders Sn(II) as the more stable oxidation state of tin.
C. Sn(IV) is the most stable oxidation state of tin.
D. The inert‑pair effect renders Pb(II) as the more stable oxidation state of lead.

Answers

Answer:

The Inert Pair effect renders Pb(II) as the more stable oxidation state of lead

Explanation:

SnBr4 + PbBr2 ---> SnBr2 + PbBr4

SnBr2 + PbBr4 ---->

The Inert pair effect is mostly observed between group 15-17 in the periodic table. It leads to stability of the lower oxidation state of an element.

The reason for the Inert pair effect is that the s electrons become Inert due to poor shielding of the d and f-electrons. The Inert pair effect is a tendency of the s electrons not to participate in bonding (remain an Inert pair).

Owing to the Inert pair effect, Pb II is more stable than Pb IV

The data table shows the number of pumpkin seeds that germinate at different temperatures. What is the median number of seeds that germinate at 24C?

A. 80.5 B. 82 C. 78.5 D. 80

Answers

Answer:

Explanation:

80

what is 19.0 ul in ml

Answers


uhhh

———————

What is ul?

I need help with 5 and 6

Answers

Finally, someone gave a clear photo.

Concentration data is commonly monitored during a reaction to determine the order with respect to a reactant. Consider the types of observations listed, and determine which order is likely for that reactant. Assume all other factors are held constant.


1. An increase in the concentration of the reactant in solution causes the reaction rate to increase exponentially.

a. first order
b. second order
c. zero order

2. The reaction rate increases in direct proportion to the concentration of the reactant in solution.

a. first order
b. second order
c. zero order

3. The reaction rate is constant regardless of the amount of reactant in solution.

a. first order
b. second order
c. zero order

Answers

Answer:

1) first order

2) second order

3) zero order

Explanation:

The curve of a first order reaction shows it to be exponential. In fact for a first order reaction, the concentration at a time t is an exponential function;

[A]t= [Ao] e^-kt

Where

[A]t = concentration at time =t

[Ao]= initial concentration

k= rate constant

t= time

For a second order reaction, the rate of reaction is directly proportional to the concentration of reactants.

For zero order reactions, rate of reaction is independent of concentration hence rate = k(rate constant)

The concentration data has been required for the determination of the rate of reaction. Based on the concentration of reactant and product, the rate has been determined.

1. For the first-order reaction, there has been an exponential increase in the rate of the reaction with the increase in the reactant concentration. The rate has been dependent on the concentration of the reactant.

Thus the correct option is A.

2. Irrespective of the first-order kinetic, in the second-order reaction, the rate of reaction has been directly proportional to the concentration of the reactant in the solution.

Thus option B is correct.

3. The zero-order reaction has been independent of the concentration of the reactant. The rate of reaction has been constant with an increase in the reactant concentration.

Thus option C is correct.

For more information about the rate of reaction, refer to the link:

https://brainly.com/question/8592296

Name the following ionic compound: Ba(OH)2*2H2O​

Answers

Barium hydroxide is a chemical compound with the chemical formula Ba(OH)2(H2O)x. The monohydrate (x =1), known as baryta or baryta-water, is one of the principal compounds of barium.

Metals typically lose electrons to complete their octet in a reaction with non-metals, whereas non-metals typically acquire electrons to complete their octet. Ionic compounds are typically formed via reactions between metals and nonmetals. The given compound barium hydroxide is ionic.

Ions with the opposite charge are carefully packed together to form crystalline solids. Ionic compounds typically result from reactions between metals and non-metals. The electrostatic interaction between the positive and negative ions holds ionic solids together.

Baryta, commonly known as barium hydroxide, has the chemical formula Ba(OH)₂. It is an odorless, clear-white powder. It has a toxic disposition. It is ionic in nature, with two hydroxide ions per molecule of barium hydroxide (Ba(OH)₂ in an aqueous solution an example.

To know more about ionic compound, visit;

https://brainly.com/question/13058663

#SPJ6

Please help
What subatomic particle is not important when calculating the atomic mass of an atom

Answers

Answer:

Electrons

Explanation:

This is because electrons barely contribute to the mass so only protons and neutrons are added.

The boundary between cold and warm air masses is called a ____.


A.
front


B.
storm


C.
climate


D.
flood

Answers

A front is the boundary between two different airmasses. ... They are: cold front, warm front, occluded front, stationary front, and dry line. Cold Front: the boundary between a cold airmass and a warm air mass, where the cold airmass is pushing the warm airmass out of the way.
A. It’s front The boundary between two air masses is called a front. Weather at a front is usually cloudy and stormy. There are four different fronts- Cold, Warm, Stationary, and Occluded. When a cold air mass meets a warm air mass, a cold front forms.

How many moles of precipitate will be formed when 100.0 mL of 0.200 M NaBr is reacted with excess Pb(NO₃)₂ in the following chemical reaction?

2 NaBr (aq) + Pb(NO₃)₂ (aq) → PbBr₂ (s) + 2 NaNO₃ (aq)

Answers

Answer : The number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.

Explanation : Given,

Concentration of NaBr = 0.200 M

Volume of solution = 100.0 mL = 0.1 L      (1 L = 1000 mL)

First we have to calculate the moles of NaBr.

[tex]\text{Moles of NaBr}=\text{Concentration of NaBr}\times \text{Volume of solution in L}[/tex]

[tex]\text{Moles of NaBr}=0.200M\times 0.1L=0.02mol[/tex]

Now we have to calculate the moles of precipitate, [tex]PbBr_2[/tex] formed.

The balanced chemical reaction is:

[tex]2NaBr(aq)+Pb(NO_3)_2(aq)\rightarrow PbBr_2(s)+2NaNO_3(aq)[/tex]

From the balanced chemical reaction we conclude that:

As, 2 moles of NaBr react to give 1 mole of [tex]PbBr_2[/tex]

So, 0.02 moles of NaBr react to give [tex]\frac{0.02}{2}=0.01[/tex] mole of [tex]PbBr_2[/tex]

Therefore, the number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.

The number of mole of the precipitate (i.e PbBr₂) formed when 100 mL of 0.2 M NaBr react with excess Pb(NO₃)₂ is 0.01 mole

We'll begin by calculating the number of mole of NaBr in 100 mL of 0.2 M NaBr solution. This can be obtained as follow:

Volume = 100 mL = 100 / 1000 = 0.1 L

Molarity of NaBr = 0.2 M

Mole of NaBr =?

Mole = Molarity x Volume

Mole of NaBr = 0.2 × 0.1

Mole of NaBr = 0.02 mole

Finally, we shall determine the number of mole of the precipitate (i.e PbBr₂) produced from the reaction. This can be obtained as follow:

2NaBr(aq) + Pb(NO₃)₂(aq) → PbBr₂(s) + 2NaNO₃ (aq)

From the balanced equation above,

2 moles of NaBr reacted to produce 1 mole of PbBr₂.

Therefore,

0.02 mole of NaBr will react to produce = [tex]\frac{0.02}{2} \\\\[/tex] = 0.01 mole of PbBr₂.

Thus, the number of mole of the precipitate (i.e PbBr₂) produced from the reaction is 0.01 mole

Learn more: https://brainly.com/question/19572703

Which statement best demonstrates how data from a global positioning system (GPS) can be used to lessen the effects of a
wildfire? (1 point)
GPS data can be used by people to quickly evacuate an area because of a wildfire
GPS data can be used by scientists to predict weather patterns that can lead to a wildfire
GPS data can be used by firefighters to identify the boundaries of a wildfire
GPS data can be used by first responders to calculate the safest route to a wildfire

Answers

Answer: here is your answer

Explanation: You are visiting your Grandmother and notice that she is eating a balanced diet, taking vitamins, getting the proper amount of sleep and is not overweight. Despite her healthy lifestyle, she appears run down and tired. You realize that it's due to her lack of physical activity. Write a convincing letter to your grandma explaining the benefits of participating in regular physical activity.

A teaspoon of salt, NaCl has a mass of about
5.0 g. How many formula units are in a
teaspoon of salt?

Answers

Answer: The answer is 5.15x10^22

Explanation:

The formula unit present in a teaspoon of salt [tex]NaCl[/tex] having a mass of about 5.0 g is [tex]5.15 \times10^{22}[/tex] formula units.

Molar mass, also known as molecular weight, is the mass of one mole of a substance. It is calculated by summing up the atomic masses of all the atoms in a molecule. The unit of molar mass is grams per mole (g/mol).

Now, to determine the number of formula units in a teaspoon of salt (NaCl), we need to use Avogadro's number and the molar mass of NaCl.

Avogadro's number [tex](N_a)[/tex] is approximately. [tex]6.022 \times10^{23}[/tex] formula units per mole.

The molar mass of [tex]NaCl[/tex] is the sum of the atomic masses of sodium (Na) and chlorine ([tex]Cl[/tex]), which are approximately 22.99 g/mol and 35.45 g/mol, respectively.

To calculate the number of formula units in 5.0 g of [tex]NaCl[/tex], we can follow these steps:

Now, calculate the number of moles of [tex]NaCl[/tex] using its molar mass:

Moles = Mass / Molar mass

Moles = [tex]5.0 g[/tex] / [tex](22.99 g/mol + 35.45 g/mol)[/tex]

Calculate the number of formula units using Avogadro's number:

Formula units = [tex]Moles \times Avogadro's number[/tex]

Let's perform the calculation:

Molar mass of [tex]NaCl[/tex]= [tex]22.99 g/mol + 35.45 g/mol = 58.44 g/mol[/tex]

Moles of [tex]NaCl[/tex] = [tex]5.0 g[/tex] / [tex]58.44 g/mol[/tex] ≈ [tex]0.0856 mol[/tex]

Formula units = [tex]0.0856 mol \times (6.022 \times 10^{23})[/tex] formula units/mol ≈ [tex]5.15 \times10^{22}[/tex]formula units.

Therefore, there are approximately [tex]5.15 \times10^{22}[/tex] formula units in a teaspoon of salt ([tex]NaCl[/tex]) having mass [tex]5.0 g[/tex].

Learn more molar mass about here:

https://brainly.com/question/31545539

#SPJ2

Which phrase describes the element carbon-14?

Answers

We know that carbon -14 is a radioactive isotope of carbon

It is used in carbon dating to know the age of different forms of dead organism including plants...

So it is used for estimating the age of sedimentry rocks which contains dead debris of plants and animals,

it can be produced from N14 by radioactive reaction of N-14 with neutron.

It is found in organisms

Answer:

Found in organisms remains.

Explanation:

Hope this helped

SpongeBob noticed that his favorite pants were not as clean as they used to be and wonders how can he get them clean again? His friend Sandy told him that he should try using Clean-O detergent, a new brand of laundry soap she found at Sail-Mart. SpongeBob made sure to wash one pair of pants in plain water and another pair in water with the Clean-O detergent. After washing both pairs of pants a total of three times, the pants washed in the Clean-O detergent did not appear to be any cleaner than the pants washed in plain water.



1)What is SpongeBob’s question?

2)What is SpongeBob’s claim?

3)What is the independent variable?

4)What is the dependent variable?

Answers

Answer:

1) SpongeBob’s question is that "what would be the appropriate way to wash his favorite pants as they don't seem as clean as earlier"?

2) SpongeBob’s claim that Clean-O detergent is unable to wash the pants more cleaner as compared to plain water.

3) Independent variable in the given example is the quantity of Clean-O detergent and plain water as it can be changed or manipulated.

4) Dependent variable in the given example is the cleanliness of pants as it will be affected by the quantity of Clean-O detergent and plain water which is an independent variable.

what are the strengths in the bonds of potassium bromide

Answers

Answer: Potassium Bromide (KBr) The Ionic bond formed between Potassium and Bromine is created through the transfer of electrons from Potassium (metal) to Bromine (nonmetal).

Explanation: this type of structure departs strongly from that expected for ionic bonding and ... whose roots go back to Max Planck's explanation in 1900 of the properties of ... types of interactions between elementary particles (the strong force, the weak force, ...

4. CHALLENGE Suppose you had a mixture of sand and small,
hollow beads. How might you separate the mixture?

Answers

I'm not sure if this is the answer but maybe oil.

What is the mass in grams of 5.9 mol c8 h18

Answers

Answer:

mass = density × volume = 0.67 × 1.00 = 0.67 kg = 670 g. The molar mass of octane, C8H18, is 8 × 12.01 (C) + 18 × 1.008 (H) = 114.224.

Explanation:

What is the density of a block of gold that occupies 1000 ml and has a mass of 3.5 kg? Show your work

Answers

Answer:

Density of block of gold is 3.5 g/cm³.

Explanation:

Given data:

Volume of block = 1000 mL

Mass of block = 3.5 kg (3.5×1000 = 3500 g)

Density of block = ?

Solution:

Density of substance is calculated by dividing the mass of substance over its volume.

Formula:

d = m/v

d = 3500 g/ 1000 mL

d = 3.5 g/mL

or

d = 3.5 g/cm³             (1ml = 1cm³)

The smallest form of matter that still retains the properties of an element

Answers

Answer:

atom

Explanation:

the atom is the smallest form.

Although there are smaller forms of matter (subatomic quarks, photons, electrons) an atom is the smallest that a form of matter could be that still possesses the properties of that element. An atom is classified into being a certain element based on how many protons it has.

Which of these is a source of pollution caused by humans?
A)
volcances
B)
pesticides
lightning strikes
D)
biological decay

Answers

Answer:

biological decay

Explanation:

Hope this helps

Which of these is the term for the rate of flow of energy in a circuit?

velocity
electricity
resistance
current

Answers

electricity would be your answer

How does ionic bond forms?

Answers

Answer:

Ionic bond, also called electrovalent bond, type of linkage formed from the electrostatic attraction between oppositely charged ions in a chemical compound. Such a bond forms when the valence (outermost) electrons of one atom are transferred permanently to another atom.

Explanation: i took the same test

Answer:

it forms where a metal element and a non metal element react together to form a now compound

is carried out in a flow reactor where pure A is fed at a concentration of 4.0 mol/dm3. If the equilibrium conversion is found to be 60%, (a) What is the equilibrium constant, KC if the reaction is a gas phase reaction? (Ans.: Gas: KC = 0.328 dm3/mol)

Answers

Answer:

0.328 mol/dm³

Explanation:

We have

I started this calculation from Rate's law.

Remember equilibrium constant has been given to be 60%

Our interest is Kc, that is the equilibrium constant.

Ca = 4(1-0.6)/1+(-0.5*0.6)

= 4-2.4/1-0.3

= 1.6/0.7

= 2.2857

Cb = 4x0.6/2(1+(-0.5*0.6))

= 2.4/2(0.7)

= 2.4/1.4

= 1.7143

Kc = Cb/Ca²

= 1.7143/2.2857²

= 1.7143/5.2244

= 0.328 mol/dm³

I have added an attachment showing earlier stages to the final answer

If the visible light spectrum is from 400 to 700 nm, would light with an energy of 2.79 x 10^-19 J be visible with the naked eye? What is the wavelength of this light?

Answers

Answer:

713 nm. It is not visible with the naked eye.

Explanation:

Step 1: Given data

Energy of light (E): 2.79 × 10⁻¹⁹ JPlanck's constant (h): 6.63 × 10⁻³⁴ J.sSpeed of light (c): 3.00 × 10⁸ m/sWavelength (λ): ?

Step 2: Calculate the wavelength of the light

We will use the Planck-Einstein equation.

E = h × c / λ

λ = h × c / E

λ = 6.63 × 10⁻³⁴ J.s × 3.00 × 10⁸ m/s / 2.79 × 10⁻¹⁹ J

λ = 7.13 × 10⁻⁷ m

Step 3: Convert "λ" to nm

We will use the relationship 1 m = 10⁹ nm.

7.13 × 10⁻⁷ m × (10⁹ nm/1 m) = 713 nm

This light is not in the 400-700 nm interval so it is not visible with the naked eye.

WHOEVER ANSWERS THIS GETS A SHOUTOUT ON INSTA LIKE I DONT EVEN CARE HELP

The heater used in a 4.33 m x 3.43 m x 3.03 m dorm room uses the combustion of natural gas (primarily methane gas) to produce the heat required to increase the temperature of the air in the dorm room. Assuming that all of the energy produced in the reaction goes towards heating only the air in the dorm room, calculate the mass of methane required to increase the temperature of the air by 7.35 °C. Assume that the specific heat of air is 30.0 J/K-mol and that 1.00 mol of air occupies 22.4 L at all temperatures. Enthalpy of formation values can be found in this table. Assume gaseous water is produced in the combustion of methane.​

Answers

Answer:

The answer is 7.89

Explanation:

Mass of methane required to increase the temperature of the air in the room by 7.35 °C is 7.95 g

The volume of air in the room is first calculated:

Volume of air in the room = 4.33 m x 3.43 m x 3.03 = 45.00 m³

1 m³ = 1000 L

45.00 m³ = 45.00 m³ * 1000 L/m³

Volume of air in L = 45000 L

Number of moles of air in 45000 L of air is then determined:

1.00 moles of air occupies 22.4 L

number of moles of air in 45000 L = 45000 L * 1 mole / 22.4 L

number of moles of air = 2008.93 moles of air

Energy that is needed to heat the room by 7.35 °C is then calculated:

Quantity of energy needed = Specific heat capacity * number of moles * temperature increase

Specific heat capacity of air = 30.0 J/K/mole

Quantity of energy needed = 30.0 * 2008.93 * 7.35

Quantity of energy needed = 442969.065 J = 443.00 kJ

The amount of methane required to produce that amount of energy is then calculated:

Equation of combustion of methane : CH₄ + 2 O₂  ---> CO₂ + 2 H₂O

Enthalpy of combustion of methane = −890.3 kJ/mole

Number of moles of methane required = 443.00 kJ / 890.8 kJ/mole = 0.497 moles

Mass of 1 mole of methane = 16.0 g

mass of 0.497 moles of methane = 16.0 * 0.497 = 7.95 g

Therefore, mass of methane required to increase the temperature of the air in the room by 7.35 °C is 7.95 g

Learn more at: https: brainly.com/question/4213585

Item 4
Which statement is one of the three parts of cell theory?


Cell organelles can be membrane-bound or not membrane-bound.


Cells make up tissues, tissues make up organs, organs make up systems, systems make up organisms.


The smallest living things are single cells, and cells are the functional units of multicellular organisms.


There are three types of cells, prokaryotic, eukaryotic plant, and eukaryotic animal.

Answers

cells make up tissues. Tissues make up organs, organs make up systems, systems make up organism

Given the volume of a gas at 200mL at 1.05atm pressure, calculate the volume of the same gas at 1.01atm. The temperature is held constant.​

Answers

Answer:

The new pressure will be  

1000 L

, rounded to one significant figure.

Explanation:

Boyle's law states that when a gas is held at a constant temperature and mass in a closed container, the volume and pressure vary inversely. The equation to use is  

P

1

V

1

=

P

2

V

2

.

Given

V

1

=

200

mL

×

1

L

1000

mL

=

0.2 L

P

1

=

700 mmHg

V

2

=

100

mL

×

1

L

1000

mL

=

0.1 L

Unknown

P

2

Equation

P

1

V

1

=

P

2

V

2

Solution

Rearrange the equation to isolate  

P

2

and solve.

P

2

=

P

1

V

1

V

2

P

2

=

(

700

mmHg

×

0.2

L

)

0.1

L

=

1400 L

, which must be rounded to  

1000 L

because all of the measurements have only one significant figure

Explanation:

Other Questions
To which part of the plot does this passage belong too? A) the expositionB) the rising actionC) the climax D) the resolution Renee can run 10 miles in 1.75 hours. Amy can run 8 miles in 1.5 hours who runs faster Why do you think many languages can coexist peacefully in some countries and not in others? Please help!!!!Thank you to anyone that answers! Lily is in the business of manufacturing phones. She must pay a daily fixed cost to rent the building and equipment, and also pays a cost per phone produced for materials and labor. The equation C=900+100pcan be used to determine the total cost, in dollars, of producing pp phones in a given day. What is the slope of the equation and what is its interpretation in the context of the problem? Compare the impacts these two organizations have had on the federal bureaucracy. How has each helped shape the activities and identity of the executive branch? Which do you think has had a greater impact on the bureaucracy? Provide evidence to support your opinion. (4 points) pair 1 4.(03.06 MC)Choose the equation below that represents the line passing through the point (2, -5) with a slope of -3. Read the passage.1.Whan that Aprill with his shoures soote2. The droghte of March hath perced to the roote,3.And bathed every veyne in swich licour4.Of which vertu engendred is the flour;5.Whan Zephirus eek with his sweete breeth6.Inspired hath in every holt and heeth7. The tendre croppes, and the yonge sonne8. Hath in the Ram his half cours yronne,Which literary device is used in lines 3 and 4?O a standard rhyme schemeO alliterationO ironyallusion PLEASE HELP IM TIMED!! THIS IS SCIENCE!! WILL MARK BRAINLIEST 13 POINTSWhich statement best explains how galaxies are held together?A. Thermal energy generated by stars holds galaxies togetherB. Magnetic forces among the components of galaxies holds galaxies togetherC. Electrical energy generated by planets holds galaxies togetherD. Gravitational forces among stars and other components of galaxies holds galaxies together DATA ANALYSIS% OF CELLS IN EACH PHASE OF THE CELL CYCLE903020GO3040302010INTERPHASEPROPHASEMETAPHASEANAPHASETILOPHASE CTO NESSImage or SketchDescriptionInterphaseProphase I need help pls help What lands were claimed by Great Britain, France, and Spain around the mid-1700s? Find two numbers if their ratio is 9:11 and their difference is 6. What farmer figure emerged from The Hundred Year's War?options:King ArthurYeomanRobin HoodInigo MontoyaWhat impact did the Black Plague have on the workforce? options:It left many ill and unable to work. As a result, many were forced out of their homes due to lack of payment. It left many overworked, due to the lack of able bodied employees. It led to a labor shortage that gave workers leverage over their overlords. Many were scared to work, due to the infectious nature of the disease.The Magna Carta became the basis for English Constitutional law and the development of the British legal system. options:TrueFalseKing George murdered Thomas A'Becket because of his loyalty for the Pope. options:TrueFalseWhat class emerged as a result of the Crusades?options:The Lower ClassThe Merchant ClassThe Upper ClassThe Middle Class Write the relation as a set of ordered pairs.A relation. An arrow goes from negative 2 to 4, 0 to 0, 2 to 4.a.ordered pairs: {(4, 2), (0, 0), (2, 4)}b.ordered pairs: {(2, 4), (0, 0), (4, 2)}c.ordered pairs: {(2, 4), (0, 0), (2, 4)}d.ordered pairs: {(4, 2), (0, 0), (4, 2)}Please select the best answer from the choices providedABCD A company looking to expand internationally with little risk would choose? Which of the following is an example of very early scientific research? sleeping in caves to avoid predation by animals painting pictures and symbols on cave walls making baskets from reeds banging rocks together to see which make a spark and create fire what does ayer translate to in english? The__________is a thick band of axon fibers that connects the two hemispheres of the braincerebrumcerebral cortexlongitudinal fissurecorpus callosum consider The line that passes through each pair of given points and decide what type of slope the line has. Which of the following statements reflects the fluid quality of income