Kara's teacher asked her to create a chart with horizontal bars. Which chart or graph should she use?

Bar graph
Column chart
Line graph
Pie chart

Answers

Answer 1

Answer:

The answer to this question is given below in the explanation section.

Explanation:

The correct answer to this question is the Bar graph.

Because we use this chart type to visually compare values across a few categories when the charts show duration or when the category text is long.

However, we can present information similarly in the bar graph and in column charts, but if you want to create a chart with the horizontal bar then you must use the Bar graph. In an Excel sheet, you can easily draw a bar graph and can format the bar graph into a 2-d bar and 3-d bar chart.

A column chart is used to compare values across a few categories. You can present values in columns and into vertical bars.

A line graph chart is used to show trends over months, years, and decades, etc.

Pie Chart is used to show a proportion of a whole. You can use the Pie chart when the total of your numbers is 100%.

Answer 2

Answer:

Bar graph option A

Explanation:

I did the test


Related Questions

The __________ list is intended to facilitate the development of the leading free network exploration tool.

Answers

Answer:

Nmap development list

Explanation:

The list being mentioned in this question is known as the Nmap development list. This list basically acts as an information gathering and analytical tool. It allows the user to easily roll out and integrate Nmap tools on a network in order to easily detect all of the IP addresses that are connected as well as analyze all of the details regarding each connected individual system. All of this information is highly valuable to a developer and facilitates the development process.

Create an interface called Runner. The interface has an abstract method called run() that displays a message describing the meaning of run to the class. Create classes called Machine, Athlete, and PoliticalCandidate that all implement Runner.
The run() should print the following in each class:
Machine - When a machine is running, it is operating.
Athlete - An athlete might run in a race, or in a game like soccer.
PoliticalCandidate - A political candidate runs for office.
----------------------------------------------------------------------------------------------------
public class Athlete implements Runner
{
public void run()
{
// write your code here
}
}
--------------------------------------------------------------------------------------
public class DemoRunners
{
public static void main(String[] args)
{
Machine runner1 = new Machine();
Athlete runner2 = new Athlete();
PoliticalCandidate runner3 = new PoliticalCandidate();
runner1.run();
runner2.run();
runner3.run();
}
}
------------------------------------------------------------------------------------------
public class Machine implements Runner
{
public void run()
{
// write your code here
}
}
----------------------------------------------------------------------------------------------------
public class PoliticalCandidate implements Runner
{
public void run()
{
// write your code here
}
}
----------------------------------------------------------------------------------------------------
public interface Runner
{
// write your code here
}
----------------------------------------------------------------------------------------------------

Answers

Answer:

Please find the code and its output in the attached file.

Explanation:

In the above-given code, an interface "Runner" is defined, inside the interface, an abstract method run is declared.

In the next step, three class "Athlete, Machine, and PoliticalCandidate" s defined that implements the run method, and use the print message that holds a given value as a message.

In the next step, a class "DemoRunners" is defined, and inside the main method, the three-class object is declared, which calls the run method.

 

Which is an example of an operating system

a
Adobe Photoshop

b
Internet Explorer

c
Windows

d
Microsoft Word

Answers

Answer:

windows

Explanation:

Examples of Operating Systems

Some examples include versions of Microsoft Windows (like Windows 10, Windows 8, Windows 7, Windows Vista, and Windows XP), Apple's macOS (formerly OS X), Chrome OS, BlackBerry Tablet OS, and flavors of Linux, an open-source operating system.

If the propagation delay through a full-adder (FA) is 150 nsec, what is the total propagation delay in nsec of an 8-bit ripple-carry adder

Answers

Answer:

270 nsec

Explanation:

Ripple-carry adder is a combination of multiple full-adders. It is relatively slow as each full-adder waits for the output of a previous full-adder for its input.

Formula to calculate the delay of a ripple-carry adder is;

  = 2( n + 1 ) x D

delay in a full-adder = 150 nsec.

number of full-adders = number of ripple-carry bits = 8

 = 2 ( 8 + 1 ) x 150

 = 18 x 150

 = 270 nsec

Please help me. Anyone who gives ridiculous answers for points will be reported.

Answers

Answer:

Well, First of all, use Linear

Explanation:

My sis always tries to explain it to me even though I know already, I can get her to give you so much explanations XD

I have the Longest explanation possible but it won't let me say it after 20 min of writing

A _____ is a smaller image of a slide.

template
toolbar
thumbnail
pane

Answers

I believe it is pane since a thumbnail is like a main photo or advertising photo kind of thing and template has nothing to do with a image as well as toolbar so the answer would be pane hope that helps :)

Your job is to write a basic blurring algorithm for a video driver. The algorithm will do the following: it will go through all pixels on the screen and for each pixel, compute the average intensity value (in red, green and blue separately) of the pixel and its 8 neighbors. (At the edges of the screen, there are fewer neighbors for each pixel.) Let's say the number of pixels on the screen is n. Then what is the order of the number of arithmetic operations (additions and divisions) required?
a. The number is order of n 4 .
b. The number is order of n2.
c. The number is order of n
d. The number is order of n3.

Answers

I’m pretty sure answer is B let me know if I’m wrong

Plz answer me will mark as brainliest ​

Answers

Answer:

Application

Explanation:

Application software comes in many forms like apps, and even on computers. The software is most common on computers of all kinds while mobile applications are most common on cellular devices.

Online Privacy
1.)Explain why is online privacy a controversial topic?
2.)Explain why this issue is applicable to you and your peers.
3.)Explain why this issue is a federal issue and not a state or local issue.

Answers

Answer:

Yes

Explanation:

Online privacy is a controversial topic due to the fact that it's a very hard thing to navigate. Some websites use cookies that are used to store your data so in a way there taking your privacy away which is controversial because of the way they use the information. Some websites store it for use of ads while others sell it. This issue is applicable to me and my peers because of the way we use technology. It can be used to steal my information about where I live and what I look up online. Also, the information stored could have my credit or debit card credentials. This issue should be a federal and nationwide issue because this is an everyday occurrence and leaves tons of people in crushing   debt every year.

Explaim Why the shape of a cell is hexagonal

Answers

because the hexagon creates a perfect shape to cover an entire area without any overlapping, and can cover an entire area without any gaps.

What is his resolution amount

Answers

I think it’s 92 I mean yh

7. While an adjacency matrix is typically easier to code than an adjacency list, it is not always a better solution. Explain when an adjacency list is a clear winner in the efficiency of your algorithm

Answers

Answer:

The answer is below

Explanation:

Adjacency list is a technique in a computer science that is used for representing graph. It deals with a gathering of unorganized lists utilized to illustrate a limited graph. In this method, each list depicts the group of data of a peak in the graph

Adjacency List are most preferred to Adjacency Matrix in some cases which are:

1.  When the graph to is required to be sparsely.

2.  For iterability, Adjacent List is more preferable

Which feature of a database allows a user to locate a specific record using keywords?

Chart
Filter
Search
Sort

Answers

Answer:

Search

Explanation:

Because you are searching up a specific recording using keywords.

I hope this helps

Answer:

Filter

Explanation:

I got it correct for a quiz.

explain how to use the information in an outline to start writing a business document

Answers

Answer: document

Explanation:

maybe try to think of an impressive title that’ll catch the readers attention or reveal the purpose of your writing in ur first paragraph of the main body

Challenge activity 1.3.6:output basics.for activities with output like below,your output's whitespace(newlines or spaces) must match exactly.see this note.write code that outputs the following.end with a newline.This weekend will be nice.​

Answers

In python:

print("This weekend will be nice.")

I hope this helps!

B1:B4 is a search table or a lookup value

Answers

Answer:

lookup value

Explanation:

Return to the Product Mix worksheet. Benicio wants to provide a visual way to compare the scenarios. Use the Scenario Manager as follows to create a PivotTable that compares the profit per unit in each scenario as follows:
a. Create a Scenario PivotTable report using the profit per unit sold (range B17:F17) as the result cells.
b. Remove the Filter field from the PivotTable.
c. Change the number format of the value fields to Currency with 2 decimal places and the $ symbol.

Answers

Answer:

To create a pivot table, select the columns to pivot and click on the insert option, click on the pivot table option and select the data columns for the pivot, verify the table range, select the location for the pivot and click ok. To format a column, select the columns and click the number option on the home tab, select the currency option and click on the number of decimal places

Explanation:

Microsoft Excel is a great tool for data analysis and visualization. It has several mathematical, engineering, statistical, and graphical tools for working with data.

A pivot-table is an essential tool for describing and comparing data of different types.

The steps to follow in order to produce a Pivot table would be as mentioned below:

Opting the columns for a pivot table. Now, make a click on the insert option. This click is followed by opting for the pivot table and the data columns that are available in it.After this, the verification of the range of the table is made and then, the location for the pivot table has opted. After this, the column is formatted and the number option is selected followed by the currency option, and the quantity of decimal places. A Pivot table allows one to establish a comparison between data of distinct categories(graphic, statistical, mathematical) and elaborate them.

Learn more about 'Pivot Table' here:

brainly.com/question/13298479

Which of the following domestic appliances does not use a magnet?
A. Fridge
B. Pressing iron
C. Radio
D. Fan​

Answers

Pressing iron isn’t domestic appliances
answer is the Pressing iron

Technician A says that the last step in the diagnostic process is to verify the problem. Technician B says that the second step is to perform a thorough visual inspection. Who is correct

Answers

Answer:

The answer to this question is given below in the explanation section. However, the correct option is Technician B.

Explanation:

There are eight steps procedures to diagnose the engine.  

Step 1 Verify the Problem

Step 2 Perform a Thorough Visual Inspection and Basic Tests

Step 3 Retrieve the Diagnostic Trouble Codes (DTCs)

Step 4 Check for Technical Service Bulletins (TSBs)

Step 5 Look Carefully at Scan Tool Data

Step 6 Narrow the Problem to a System or Cylinder

Step 7 Repair the Problem and Determine the Root Cause

Step 8 Verify the Repair and Clear Any Stored DTCs

So the correct technician is Technician B that says that the second step is to perform a thorough visual inspection.

Write the three working fundamental steps of a computer.​

Answers

Answer:

just tryin' to help you

Explanation:

The three stages of computing are input, processing and output. A computer works through these stages by 'running' a program. A program is a set of step-by-step instructions which tells the computer exactly what to do with input in order to produce the required output.

A CPU with a quad-core microprocessor runs _____ times as fast as a computer with a single-core processor.

two

three

four

eight

Answers

Four is the rught answer i don’t think so

Answer:

four

Explanation:

quad means four so it runs four times faster

Plz answer me will mark as brainliest ​

Answers

Answer:

True

Operating System

Booting

Wireless technology is best described as a/an

stationary computing system.

office computing system.

mobile computing system.

inflexible computing system.

Answers

Answer:

mobile computing system

Explanation:

Answer:

mobile computing system... C

Which orientation is wider than it is tall?

Portrait
Macro
Shutter
Landscape

Answers

Answer:

Landscape

Explanation:

Landscape orientation is wider than it is tall.

Answer:

Landscape

Explanation:

What is the maximum number of VLANs that can be configured on a switch supporting the 802.1Q protocol? Why?

Answers

Answer:

4096 VLANs

Explanation:

A VLAN (virtual LAN) is a group of devices on one or more LAN connected to each other without physical connections. VLANs help reduce collisions.

An 802.1Q Ethernet frame header has VLAN ID of 12 bit VLAN field. Hence the maximum number of possible VLAN ID is 4096 (2¹²).  This means that a switch supporting the 802.1Q protocol can have a maximum of 4096 VLANs

A lot of VLANs ID are supported by a switch. The maximum number of VLANs that can be configured on a switch supporting the 802.1Q protocol is 4,094 VLANS.

All the VLAN needs an ID that is given by the VID field as stated in the IEEE 802.1Q specification. The VID field is known to be of  12 bits giving a total of 4,096 combinations.

But that of 0x000 and 0xFFF are set apart. This therefore makes or leaves it as 4,094 possible VLANS limits. Under IEEE 802.1Q, the maximum number of VLANs that is found on an Ethernet network is 4,094.

Learn more about VLANs from

https://brainly.com/question/25867685

We define the following terms:
Lexicographical Order, also known as alphabetic or dictionary order, orders characters as follows:
For example, ball < cat, dog < dorm, Happy < happy, Zoo < ball.
A substring of a string is a contiguous block of characters in the string. For example, the substrings of abc are a, b, c, ab, bc, and abc.
Given a string, , and an integer, , complete the function so that it finds the lexicographically smallest and largest substrings of length .
Input Format
The first line contains a string denoting .
The second line contains an integer denoting .
Constraints
consists of English alphabetic letters only (i.e., [a-zA-Z]).
Output Format
Return the respective lexicographically smallest and largest substrings as a single newline-separated string.
Sample Input 0
welcometojava
3
Sample Output 0
ava
wel
Explanation 0
String has the following lexicographically-ordered substrings of length :
We then return the first (lexicographically smallest) substring and the last (lexicographically largest) substring as two newline-separated values (i.e., ava\nwel).
The stub code in the editor then prints ava as our first line of output and wel as our second line of output.
Solution:-
import java.util.Scanner;
public class Solution {
public static String getSmallestAndLargest(String s, int k) {
String smallest = "";
String largest = "";
smallest = largest = s.substring(0, k);
for (int i=1; i String substr = s.substring(i, i+k);
if (smallest.compareTo(substr) > 0)
smallest = substr;
if (largest.compareTo(substr) < 0)
largest = substr;
}
return smallest + "\n" + largest;
}
public static void main(String[] args) {
Scanner scan = new Scanner(System.in);
String s = scan.next();
int k = scan.nextInt();
scan.close();
System.out.println(getSmallestAndLargest(s, k));
}
}

Answers

Answer:

Here is the JAVA program:

import java.util.*;  

public class Solution {    // class name

   public static String getSmallestAndLargest(String s, int k) {   //method that takes a string s and and integer k and returns lexicographically smallest and largest substrings

       String smallest = "";   //stores the smallest substring

       String largest = "";   //stores the largest substring

       smallest = largest = s.substring(0, k);  //sets the smallest and largest to substring from 0-th start index and k-th end index of string s

       for(int i = 0;i<=s.length()-k;i++){  //iterates through the string s till length()-k

            String subString = s.substring(i,i+k);  //stores the substring of string s from ith index to i+k th index

            if(i == 0){ //if i is equal to 0

                smallest = subString;              }  //assigns subString to smallest

            if(subString.compareTo(largest)>0){ //checks if the subString is lexicographically greater than largest

                largest = subString;  //sets subString to largest

            }else if(subString.compareTo(smallest)<0)  //checks if the subString is lexicographically less than smallest

                smallest = subString;       }       //sets subString to smallest

       return smallest + "\n" + largest;     }  //returns the lexicographically smallest and largest substrings

   public static void main(String[] args) {  //start of main method

       Scanner scan = new Scanner(System.in);  //creates Scanner object

       String s = scan.next();  //scans and reads input string from user

       int k = scan.nextInt();  //scans and reads integer k from user

       scan.close();  

       System.out.println(getSmallestAndLargest(s, k));      }  }  //calls method by passing string s and integer k to it to display lexicographically smallest and lexicographically largest substring

Explanation:

The program takes a string s and an integer k and passes them to function getSmallestAndLargest that returns the lexicographically smallest and lexicographically largest substring. The method works as follows:

Lets say s = helloworld and k = 3

       smallest = largest = s.substring(0, k);

s.substring(0, k);  is returns the substring from 0th index to k-th index so it gives substring hel

       for(int i = 0;i<=s.length()-k;i++) This loop iterates through the string s till s.length()-k times

s.length()-k is equal to 7 in this example

At first iteration:

i = 0

i<=s.length()-k is true  so program enters the body of loop

String subString = s.substring(i,i+k); this becomes:

subString = s.substring(0,3);

subString = "hel"

if(i == 0) this is true so:

smallest = subString;

smallest = "hel"

At second iteration:

i = 1

i<=s.length()-k is true  so program enters the body of loop

String subString = s.substring(i,i+k); this becomes:

subString = s.substring(1,4);

subString = "ell"

if(subString.compareTo(smallest)<0) this condition is true because the subString ell is compared to smallest hel and it is lexographically less than smallest so :

smallest = subString;

smallest = "ell"

So at each iteration 3 characters of string s are taken and if and else if condition checks if these characters are lexicographically equal, smaller or larger and the values of largest and smallest change accordingly

After the loop ends the statement return smallest + "\n" + largest; executes which returns the smallest and largest substrings. So the output of the entire program with given example is:

ell                                                                                                                                           wor

Here ell is the lexicographically  smallest substring and wor is lexicographically  largest substring in the string helloworld

The screenshot of the program along with its output is attached.

The code below is supposed to display the name and score for the student with the highest score one time before the program ends. It is displaying Jim as the student with the highest score. It is displaying the highest score of 95. Unfortunately, Jim does not have a score of 95. Correct the following code:

Declare String students[SIZES] = {"Jen", "Jon", "Jan", "Joe", "Jim"}
Declare Integer scores[SIZES] = 70, 85, 72, 95, 90
Declare Integer index Declare Integer highest = scores[0]
Declare Integer highest Name = " " For index = 0
To SIZES //Assume that this translates to For (index = 0; index <= SIZES, index ++)
If scores[index] > highest then highest = scores[index]
End Of highestName = students[index]
End For Display "

The name of the student with the highest score is ", highest Name Display "The highest score is ", highest

Answers

Answer:

Modify

If scores[index] > highest then highest = scores[index]

End Of highest

Name = students[index]

End For Display

to

If scores[index] > highest then highest = scores[index]

Name = students[index]

End Of highest

End For Display

Explanation:

In the code, you posted the code segment that gets the name of the student with the highest score is outside the if condition that determines the highest.

To make correction, we only need to bring this code segment into the loop.

See Answer

Which of the following is NOT solely an Internet-based company?
Netflix®
Amazon®
Pandora®
CNN®

Answers

Answer:

I think it's Pandora, though I am familiar with others

Answer:

CNN

Explanation:

-Roll 2 standard dice
-If the sum of the dice are greater than 8, print “The sum of the dice is ____”
- print “done” at the end of the code

Answers

In python:

import random

die1 = random.randint(1,6)

die2 = random.randint(1,6)

if die1 + die2 > 8:

   print(f"The sum of the dice is {die1 + die2}")

print("done")

If you need me to change anything, I will. I hope this helps!

1. When you write HTML code, you use ______ to describe the structure of information on a webpage. a. a web address b. tags c. styles d. links

Answers

Answer:

b. tags

Explanation:

When you write HTML code, you use tags to describe the structure of information on a webpage. These tags are represented by the following symbols <>. All of HTML is written using different types of tags such as <body>, <main>, <div>, <nav>, etc. Each of these serves a different purpose but are all used for structuring the specific information on a website so that the information is well organized and is not all on top of each other. This also allows for specific sections to be easily targeted and styles separately from the other sections.

Other Questions
Match the sentence to what it illustrates. independent clauses linked without a conjunction Christ was equal with God, but He willingly became a servant. an introductory participial phrase Hang gliding is a popular pastime; it takes skill and a bit of daring. a mark indicating that a list will follow You seem to have found, my good friend, a real peace in life. a comma linking two independent clauses Walking without a cane, the old man tried to escape unnoticed. a sentence demonstrating direct address These colors were chosen for the school: purple, green, and white. Nanjones Company manufactures a line of products distributed nationally through wholesalers. Presented below are planned manufacturing data for the year and actual data for November of the current year. The company applies overhead based on planned machine hours using a predetermined annual rate. Planning Data Annual NovemberFixed manufacturing overhead $1,200,000 $100,000Variable manufacturing overhead 2,400,000 220,000Direct labor hours 48,000 4,000Machine hours 240,000 20,000Data for NovemberDirect labor hours (actual) 4,200 Direct labor hours (plan based on output) 4,000 Machine hours (actual) 21,600 Machine hours (plan based on output) 21,000 Fixed manufacturing overhead $101,200 Variable manufacturing overhead $214,000 The fixed overhead volume variance for November wasa. $1,200 unfavorable.b. $5,000 favorable.c. $5,000 unfavorable.d. $10,000 favorable. Which process does not release energy?a photosynthesisb lactic acid fermentationc cell respirationd alcoholic fermentation Sociologists believe that pur "race" depends more on the society in which we live than on our biology. is this statemen true or false? Alright anyone that can help me? Mr. Atkinson has 5.25 lb of dry fish food. He will put an equal amount of food into 3 containers. How much fish food will be in each container? sum of digits of a two-digit number is 8 if the number obtained by reversing the digit is 18 more than the original number then the original number is One way to represent a substance is with a chemical formula. In the formula CO2, what do the symbols Cand o refer to? What does the U.S. House of Representatives have the power to do to government officials, according to the Constitution? how to lass long on bed Can anyone please help me with answering these literature questions? [(images are below)] (these questions are from Hindi)Keep your answers as short as possible ( I can not memorize long answers )Thanks a lot! mai mixed a batch of pink paint using 5 cups of red paint and 3 cups of white paint.priya mixed another batch of pink paint using 7 cups of red paint and 4 cups of white paint are the 2 batches the same shade of pink?? PLEASE HELP ASAP I WILL GIVE BRAINLIEST TO WHOEVER GIVES THE RIGHT ANSWER FIRST Simplify the following expression.5.3x 8.14 + 3.6x + 9.8A. -2.84x 1.66B. 8.9x + 17.94C. -2.84x + 17.94D. 8.9x + 1.66 PLEASE ANSWERSelect the correct answer.Caroline rewrote a quadratic equation in vertex form by completing the square, but her work has errors.Identify the first error in her work.A. She incorrectly factored out the value of a.B. She subtracted the wrong value to maintain balance after completing the square.C. She incorrectly combined the constant terms.D. She squared the wrong value when completing the square. Find Each Difference.1) 2-(-2)=2) (-1)-10=3) 8-7=4) (-8)-(-6) Is this a good freestyle poem Do you have a recommendationWhat would people say if I were gone?What would they write on my tombstone?In 10 years would they even remember me?If I don't even like myself why would people like me?I feel like I am carrying my problems up a mountain, people have tried and helped but after a while, they just walk away. Someone asks me can you take some of mine, of course, why not.I feel like I am letting myself be crushed by my own problems but I want to help everyone else.I don't want anyone to feel like I do so I try to take their problems to. I have taken to many I am finally falling.I am falling off the mountain will anyone even try to stop me from falling or will they let me go.Let me go. Let me go.Sometimes I wish someone would save me because I have been trying to save myself for too long.But others times I wnder do they really want to help me or do they just want me to take some of their pain? need answer asap Whole numbers: ___ + ___ + ___ = _____ cups of soup mix. A forensic scientist is often called upon to testify about...A.a suspect's moral characterB.physical evidence related to a crimeC.the reliability of witness testimonyD.the past history of the suspect can someone help me please !!