Answer:
5.5 amps
Explanation:
V = I*R
110 = 20I
I = 5.5
1. A chemical reaction is taking place between two reactants dissolved in a liter of water. If an
additional liter of pure water is added to the reaction mixture, what will be the effect on the
reaction rate?
Answer: The reaction rate will DECREASE.
Explanation:
Chemical reaction occurs through the combination of chemical reactants to form new products. The rate if this reaction is affected by the following factors:
- the chemical nature of the reacting substances,
- the state of subdivision (one large lump versus many small particles) of the reactants,
- the temperature of the reactants,
- the concentration of the reactants, and
- the presence of a catalyst.
When additional liter of pure water is added to the reaction mixture, collision between reactant molecules is reduced The dilution causes the concentration of the reactants to reduce. This in turn affects the rate of chemical reactions as the decreased concentration of reactants leads to a decrease in the reaction rate.
In a solution at 25 degrees Celsius the H is 3.5 x 10^-6 M. What is the OH
Answer:
Explanation:
[ H⁺] = 3.5 x 10⁻⁶ M .
[ H⁺] [ OH⁻] = 10⁻¹⁴
[ OH⁻] x 3.5 x 10⁻⁶ = 10⁻¹⁴
[ OH⁻] = 2.857 x 10⁻⁹ M .
At which electrade in a voltaic cell does redaction always occar?
Answer:cathode
Explanation:It is also known as the galvanic cell or electrochemical cell. In the voltaic cell, the oxidation occurs at an anode which is a negative electrode and the reduction occurs at the cathode which is a positive electrode.
why do we need to standardize EDTA in determination of water hardness?
Answer:
a specific amount edta is added to a specific amount of distilled water
Explanation:
Hydrogen sulfate reacts with gallium chlorate to produce hydrogen chlorate and gallium sulfate(write the balanced chemical equation,and word reaction)
Answer:
[tex]3H_2S+2Ga(ClO_3)_3\rightarrow Ga_2S_3+6HClO_3[/tex]
Explanation:
Hello,
In this case, the described chemical reaction is:
[tex]H_2S+Ga(ClO_3)_3\rightarrow Ga_2S_3+HClO_3[/tex]
After balancing, we must assure the same quantity of atoms of all the elements at both reactants and products:
[tex]3H_2S+2Ga(ClO_3)_3\rightarrow Ga_2S_3+6HClO_3[/tex]
Thus, we find two galliums, three sulfurs, six chlorines, six hydrogens and eighteen oxygens at both reactants and products.
Best regards.
Is glue a liquid or a solid
Answer:
White school glue is liquid because its long polymers can slide over and along one another. It does not flow easily, though; it is quite viscous. The addition of some chemicals—such as a borax solution (or sodium tetraborate decahydrate dissolved in water)—can cause cross-links to form between the polymers.
Explanation:
Answer:
It is a liquid :]
What is the purpose of the arrow in a chemical equation?
O A.
It indicates the direction in which the reaction occurs.
Св.
It separates the elements from the compounds.
O C.
It indicates the direction of increase in the number of molecules.
D.
It indicates the direction of heat movement in a reaction.
Reset
Next
Answer:
A) It indicates the direction in which the reaction occurs.
Explanation:
The reason we don't use equals signs (=) in chemical reactions is because of the Identity Property of Equality (if a = b then b = a), which would allow us to reverse reactions. Reactions can't just be reversed (since some don't even occur); we need to know what is reacting to make what. Thus, we use the arrow, or yields symbol to denote this.
The substances to the left of the sign are the reactants, the ones that are reacting, and the ones on the right are the products, the ones that are being produced from the reactants. The arrow is an excellent way to represent the direction the reaction occurs in as the way it's written clearly demonstrates direction.
Hope this helps!
Ca+HCI—>CaCI2+H2, what is the reaction?
Answer:
single replacement reaction
Explanation:
This is a kind of single replacement reaction where you switch either cations or anions. Here you switched Ca for H and produced Cacl2 and H2 gas by itself.
Answer:
It is a displacement reaction
What is the difference between a strong electrolyte and a weak electrolyte
Answer:
One will give you more energy and the other will make you tired!
Explanation:
Olivia, a Latina student, is told that she can check only two books out of the library at a time, but Leann, a white student, is told that she can check out as many books as she wants. The best way for a white person to help end this type of white privilege is to say:
A. that this difference in treatment should stop now .
B. that it's better than it used to be
C. that it's worse in other countries
D. that people of color are overly sensitive .
Answer:
a
Explanation:
the others are rude, and rather support this, while a helps to support the ending of white privlige
Answer:
A. Definitely!
Explanation:
If everyone says that in other country that's worst and let it go, racism will never stop! Saying that people of color are overly sensitive is also racist because everyone can be sensitive. There color of skin change nothing! They are humans like everyone and if they want to defend themself, they have the right! Racism still exist and it needs to stop after all these years of sufferance and pain. White people are not better that people of color. Everyone deserve to be equal. Thank you.
We now consider three moles of ideal gas at the same initial state (3.0 L at 273 K). This time, we will first perform an isobaric compression, then an isothermal expansion to bring the gas to the final state with the same volume of 3.0 L, and at temperature 110 K. Hint (a) How much work (in J) is done on the gas during the isobaric compression? Wcompression = J (b) How much work (in J) is done on the gas during the isothermal expansion? Wexpansion = J
Answer:
Explanation:
check the image
a)
The workdone on the gas during during the isobaric compression
W = pΔV
= nRΔT
= 2 * 8.314 * (273-110)
=2710J
b) The workdone on the gas during during the isothermal expansion
[tex]W= nRT_fIn(\frac{V_f}{V_i} )\\\\2*8.314*110In\frac{110}{273} \\\\=-1662.6J[/tex]
Answer:
a) The work done during the isobaric compression is 4060.91 J.
b) The work done during the isothermal expansion is 2489.58 J.
Explanation:
a) Here we have two different processes. We calculate the work done during the isobaric compression using the following formula:
[tex] W= -P. (V₂ - V₁) [/tex]
Since the process is isobaric, the pressure is constant. First we need to find this value. In order to do that, we use the ideal gas equation:
[tex] p.V= n.R.T [/tex]
[tex] p= [n.R.T] ÷ V = [3 mol × 0.082 (L.atm÷mol.K) × 273 K] ÷ 3 L [/tex]
p = 22.39 atm
Now, we need to find V₂. We do this using Charles' law:
[tex] V₁/T₁ = V₂/T₂ [/tex]
[tex] V₂ = V₁/T₁ × T₂ = 3 L ÷ 273 K × 110 K [/tex]
V₂ = 1.21 L
Now we are in condition to calculate the work done during the isobaric compression:
[tex] W= -P. (V₂ - V₁) [/tex]
[tex] W= -22.39 atm. (1.21 - 3) L [/tex]
W= 40. 07 L.atm
We multiply this value by 101.325 to convert it to joules: W= 4060.91 J
b) To calculate the work done during the isothermal expansion, we use the following equation:
[tex] W = n.R.T. ln (V₂/V₁) [/tex]
[tex] W = 3 mol ×0.082 (L.atm/mol.K) × 110 K × ln (3L / 1.21 L) [/tex]
W= 24.57 L.atm
We convert this value to joules: W= 2489.58 J
Some building materials contain small capsules filled with paraffin wax to improve the insulating properties of the materials. The melting and freezing of paraffin inside the capsules in the material helps to regulate temperature. Paraffin wax begins to melt at 37°C37°C.(a) While the wax is melting, is the net flow of thermal energy from the wax to the surroundings or from the surroundings to the wax? Justify your answer.(b) Calculate the amount of thermal energy, in kJkJ, that is required to melt 15.215.2 grams of solid paraffin wax when the temperature of the surroundings is above the melting point of paraffin. (The molar mass of paraffin is 282.62g/mol282.62g/mol, and its molar heat of fusion is 48.78kJ/mol)(c) When paraffin wax melts, its density decreases. Provide a particle-level explanation of this observation.
Answer:
(a)
From surrounding to wax
(b)
Q = 2.62 KJ
(c)
Density of a substance is defined as the no. of particles of the substance, that occur in a unit volume. So, when the substance melts, the inter-molecular attractive forces and bonds between molecules or atoms are weakened. This, increases the distance between the molecules or atoms. Hence, the no. of particles in a unit volume is decreased. As, a result of this, the density of the substance also decreases.
Explanation:
(a)
During the melting process, the solid material or substance requires energy, in order to break the bonds between its molecules or atoms.
Therefore, while the wax is melting, the net flow of thermal energy is from surrounding to the wax.
(b)
The amount of energy required to melt solid paraffin wax is given by the formula:
Q = nC
where,
Q = amount of energy
C = Molar Heat of Fusion = 48.78 KJ/mol
n = No. of Moles = Mass in gram/Molar Mass = (15.2 g)/(282.62 g/mol)
n = 0.0538 mol
Therefore,
Q = (0.0538 mol)(48.78 KJ/mol)
Q = 2.62 KJ
(c)
Density of a substance is defined as the no. of particles of the substance, that occur in a unit volume. So, when the substance melts, the inter-molecular attractive forces and bonds between molecules or atoms are weakened. This, increases the distance between the molecules or atoms. Hence, the no. of particles in a unit volume is decreased. As, a result of this, the density of the substance also decreases.
(a) During the melting of wax, the flow of thermal energy has been from the surroundings to the wax.
(b) The amount of heat requires for the melting of 15.215 grams of solid paraffin has been 2.62 kJ.
(c) The density decreases due to a decrease in the number of molecules per unit volume.
(a) Melting results in the conversion of solid-state to the liquid state. This step requires energy. Thus, the flow of energy has been from the surroundings to the wax.
(b) Amount of heat requires (Q) can be given by:
Q = nC
Where, n = moles of the sample, and C = heat of fusion
Moles of paraffin = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]
Moles of paraffin = [tex]\rm \dfrac{15.215}{286.62}[/tex]
Moles of paraffin = 0.0538 moles
Q = 0.0538 [tex]\times[/tex] 48.78 kJ/mol
Q = 2.62 kJ.
The amount of heat requires for the melting of 15.215 grams of solid paraffin has been 2.62 kJ.
(c) The density has been the mass or number of particles present per unit volume. The melting of wax results in a weaker intermolecular force. The resulting liquid will have fewer molecules present in the unit volume.
Thus, the density decreases due to a decrease in the number of molecules per unit volume.
For more information about the heat of fusion, refer to the link:
https://brainly.com/question/14053504
Which is an example of antiracist behavior?
A. Tyler smiles at a joke made in his driver education class about Asian drivers.
B.Tyler makes a joke about the high number of African Americans dropping out of school.
C.Tyler suggests that an ethnic studies course be taught at his school
D. All of the above
Answer:
C.
Explanation:
In C.) Tyler is not suggesting that one race is better than another he is only suggesting his own non biased opinion on what courses should be taught at his school.
Answer:
Explanation:
C
Base your answers on the graph below, which represents uniform cooling of a sample of a pure substance, starting as a gas. The boiling point of the substance is
Answer:
120
Explanation:
Because it starts as gas at from A to B, B to C is gas and liquid equilibrium, so in order to go to boiling point (point where it goes from liquid to gas) it happens at 120 because after that you see that steep slope which represents the gas being formed.
The transition from liquid to gas, or the boiling point, occurs at 120 because after that you see that steep slope, which symbolizes the gas being formed. This is because the transition from liquid to gas, or the boiling point, occurs at 120 because it starts as a gas at A to B, B to C is gas and liquid equilibrium.
What is boiling point ?The temperature at which a liquid's vapor pressure equals the pressure around it and the liquid transforms into a vapor is known as the boiling point of a material. A liquid's boiling point changes according on the atmospheric pressure in the area.
A cooling curve is a line graph that depicts the transition of matter from one phase to another, usually from a liquid or gas to a solid. Time is an independent variable (X-axis), while temperature is a dependent variable (Y-axis).
Thus, the boiling point of the substance is 120° c.
To learn more about boiling point follow the link below;
https://brainly.com/question/2153588
#SPJ2
Calculate the pH of a solution having the following ion concentrations at 298 K. [H+] = 4.6 × 10^-2 M
Answer:
The pH of the solution is 1.34, being an acidic pH.
Explanation:
pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance. The acronym pH stands for hydrogen potential.
The pH scale ranges from 0 to 14. Values less than 7 indicate the acidity range and those greater than 7 indicate alkalinity or basicity. Value 7 is considered neutral. Mathematically, pH is the negative logarithm of the molar concentration of hydrogen or proton ions (H⁺) or hydronium ions (H₃O⁺).
pH= - log [H⁺] = - log [H₃O⁺]
In this case, [H⁺]= 4.6*10⁻² M. Replacing:
pH= - log 4.6*10⁻²
Solving:
pH= 1.34
The pH of the solution is 1.34, being an acidic pH.
PLEASEE HELPP ME WITH THIS QUESTION I REALLY NEED A GOOD EXPLANATION AND BE SPECIFIC PLEASE WILL MARK BRAINIEST FOR CORRECT ANSWER!!!!!!!!
QUESTION: Describe the three parts of a seed and give the function of each.
Answer:
The three parts of the seed are the embryo, endosperm and the seed coat.
Explanation:
The embryo is the young multicellular organism before it emerges from the seed. The endosperm is a source of stored food which consists mostly of starches. The seed coat consists of one or more protective layers that encase the seed.
Hope this helps x
Identify the conjugate base in each pairs
1)RCOOH. RCOO
2)H2PO+. H2PO4
3)RNH2.RNH3+
4)H2CO3.HCO3-
Answer: 1) [tex]RCOO^-[/tex]
2) [tex]H_2PO_4^-[/tex]
3) [tex]RNH_2[/tex]
4) [tex]HCO_3^-[/tex]
Explanation:
According to the Bronsted-Lowry conjugate acid-base theory, an acid is defined as a substance which looses donates protons and thus forming conjugate base and a base is defined as a substance which accepts protons and thus forming conjugate acid.
1) [tex]RCOOH\rightarrow RCOO^-+H^+[/tex]
Here, [tex]RCOOH[/tex] is loosing a proton, thus it is considered as an acid and after losing a proton, it forms [tex]RCOO^-[/tex] which is a conjugate base.
2) [tex]H_3PO_4\rightarrow H_2PO_4^-+H^+[/tex]
Here, [tex]H_3PO_4[/tex] is loosing a proton, thus it is considered as an acid and after losing a proton, it forms [tex]H_2PO_4^-[/tex] which is a conjugate base.
3) [tex]RNH_3^+\rightarrow RNH_2+H^+[/tex]
Here, [tex]RNH_3^+[/tex] is loosing a proton, thus it is considered as an acid and after losing a proton, it forms [tex]RNH_2[/tex] which is a conjugate base.
4) [tex]H_2CO_3\rightarrow HCO_3^-+H^+[/tex]
Here, [tex]H_2CO_3[/tex] is loosing a proton, thus it is considered as an acid and after losing a proton, it forms [tex]HCO_3^-[/tex] which is a conjugate base.
By means of a schematic diagram show how a bacteria cell applied to the region of a cowpea root can end up by becoming a nitrate ion which can be absorb by a subsequent crop.
Answer:
Nitrifying bacterium such as nitrosomonas or nitrobacter, whe applied to the soil, convert free ammonia or nitrogen to nitrates through oxidation. They are a group of aerobic bacteria playing an important role in the nitrogen cycle as producers of energy from inorganic source.
The schematic diagram attached summaries the action of such bacteria.
Balance the equation below, using the smallest whole-number coefficients. ____Fe(s) + ____ O2(g) + ____ H2O(l) → ____Fe(OH)2(s)
Answer:
2Fe(s) + O₂(g) + 2H₂O(l) → 2Fe(OH)₂(s)
Explanation:
Balanced equation willl be:
[tex]2Fe(s) + O_2(g) + 2H_2O(l) - > 2Fe(OH)_2[/tex]
What is balance equation with example?A balanced chemical equation occurs when the number of the atoms involved in the reactants side is equal to the number of atoms in the products side. In this chemical reaction, nitrogen (N2) reacts with hydrogen (H) to produce ammonia (NH3). The reactants are nitrogen and hydrogen, and the product is ammonia.
What is the rule of balance?On a separate sheet of paper, make a claim in which you mathematically state the rule of balance - that is, the rule that one must use to determine if two weights placed on opposite sides of the fulcrum will balance each other.
Learn more about Balacing a Chemical Equation here
https://brainly.com/question/26227625
#SPJ2
For many purposes we can treat propane as an ideal gas at temperatures above its boiling point of . Suppose the temperature of a sample of propane gas is lowered from to , and at the same time the pressure is decreased by . Does the volume of the sample increase, decrease, or stay the same? increase decrease stays the same If you said the volume increases or decreases, calculate the percentage change in the volume. Round your answer to the nearest percent.
Answer:
See explaination
Explanation:
please kindly see attachment for the step by step solution of the given problem
Complete the table:
Mass Solute Mass Solvent Mass Solution Mass Percent
2.65 g 26.0 g _____ _____
_____ 46.8 g _____ 4.0 %
1.68 g _____ 26.2 g _____
26.7 g _____ _____ 5.9 %
Answer:
1.
Mass solution = 28.65 g
Mass percent = 9.14 %
2.
Mass solute = 1.95 g
Mass solution = 48.75 g
3.
Mass solvent = 24.52 g
Mass percent = 6.41 %
4.
Mass solution = 476.8 g
Mass solvent =450.1 g
Explanation:
Hello,
In this case, we define the mass percent as:
[tex]\%m/m=\frac{m_{solute}}{m_{solute}+m_{solution}} *100\%[/tex]
Wherein we use the mass of the solute and the mass of the solvent in order to compute it, thus, for each case we have:
1.
Mass solution: 2.65 g + 26.0 g = 28.65 g
Mass percent: 2.62 g / (2.65 g + 26.0 g) x 100% = 9.14 %
2.
Mass solute: 4.0 % x 46.8 g / (1 - 4.0 %) = 1.95 g
Mass solution: 1.95 g + 46.8 g = 48.75 g
3.
Mass solvent: 26.2 g - 1.68 g = 24.52 g
Mass percent: 1.68 g / (1.68 g + 24.52 g) x 100% = 6.41 %
4.
Mass solution: 26.7 g / 5.6 % = 476.8 g
Mass solvent: 476.8 g - 26.7 g =450.1 g
Best regards.
Answer:
20.9
Explanation:
What does a particular point on a line of a phase diagram represent ?
Answer:
What does a particular point on a line of a phase diagram represent ?
Explanation:
The lines on the phase diagram represent combinations of pressures and temperatures at which two phases coexist in equilibrium.
The phase diagram's lines depict mixtures of pressures as well as temperatures where two phases can peacefully coexist.
What is a phase diagram?A phase diagram shows a visual representation of particular chemical-physical states across various pressures and temperatures.
What is a phase?A phase would be an area of space where a molecule's physical characteristics have been all essentially uniform.
The phase diagram's lines depict mixtures of pressures as well as temperatures where two phases can peacefully coexist.
To know more about the phase diagram
https://brainly.com/question/16945664
#SPJ2
what is the mass of oxygen in 10g of water
Answer:
8.90g
Explanation:
2×O=2×16.00=32.00g
mass=0.278×32.00g=8.90g
What diffuses faster: a gas sample into a vacuum container, or a gas sample into an air filled container?
Answer:
A gas sample into a vacuum diffuses faster than a gas sample into an air-filled container.
Explanation:
Diffusion
When a gas is introduced into a closed space, the molecules of the gas move freely and spread throughout the closed space.
The gas molecules tend to move from higher concentration to lower concentration area so that the concentration of gas throughout the closed space comes in equilibrium. This happens because higher concentration spaces have a greater number of gas molecules and vice-versa. In other words, gas molecules move towards the spaces having less concentration, i.e., they have a smaller number of gas molecules, and hence, can accommodate additional gas molecules.
This process of dispersion of gas molecules, as a result of difference in concentration, is called diffusion. The speed of diffusion is affected by the collisions suffered by the gas molecules.
When the molecules of gas disperse in any space, they have a tendency to travel in a straight line. In this process, they hit the molecules of other gases in the same space which causes a decrease in the speed of the molecules of gas hence, slowing the process of dispersion or diffusion.
Diffusion in air-filled container
When a gas is introduced into a closed container which is already filled with air, the molecules of the newly-introduced gas, as per their tendency, tend to move throughout the closed container irrespective of the concentration gradient.
Diffusion in a vacuum container
Whereas, in vacuum, the molecules of the introduced gas do not face any collisions with any molecules of other gas. The molecules of gas move freely until they collide with the sides of the container. The only collision occurring in a vacuum container is when the molecules hit the containers. Hence, gas diffusion takes place faster in a closed container having vacuum than a closed container which is already filled with air.
Which compound has the highest boiling point? Ethane, Propane, Butane, Pentane, Hexane
Answer:
Hexane
Explanation:
These are hydrocarbons from the same group with general formula CnH2n+2.
So, the more molecular mass are (the more number of carbons) the higher boiling point will be.
Hexane has the most number of carbon atoms(6) , so the highest molecular mass and the highest boiling point.
PLEASE!
SEE ATTACHED.
Answer:
Here's what I get
Explanation:
A. Prepare Ca(NO₃)₂ solution
Scoopula — to transfer the solid to an Erlenmeyer flask
Erlenmeyer flask — to hold the solid for weighing and to prepare the solution
Volumetric flask — to hold the liquid
Funnel — to transfer the solution to the volumetric flask
Wash bottle — to fill the volumetric flask to the mark
B. Weigh K₂SO₄
Scoopula — to transfer the solid to a weighing bottle
Weighing bottle — to hold the solid for weighing.
C. Add acetic acid to a volumetric flask
Volumetric flask — to hold the acid
Pipet —to measure out the acid and transfer it to the flask
Pipet bulb — safety feature for the pipet and for control of the acid volume.
D. Add NaOH to an acid
Beaker — to hold the NaOH solution
Ring stand — to hold a buret
Buret clamp — to hold the buret
Funnel — to transfer the solution to a buret
Buret — to hold the NaOH solution for addition to the acid
calculate the number of chloride ions in 6.8 g of zinc chloride
Answer:
The correct answer is 0.300 * 10^23 ions.
Explanation:
Based on the given question, there is a need to find the number of chloride ions in the mentioned 6.8 grams of zinc chloride compound.
The moles of zinc chloride (ZnCl2) is,
= mass of zinc + 2 mass of chlorine
= 65.38 + 2 (35.45)
=65.38 + 70.90
= 136.28 grams (The molecular mass of zinc is 65.38 and the molecular mass of chlorine is 35.45)
Thus, 136.28 g of ZnCl2 contains 70.90 grams of chlorine
Therefore, 6.8 grams of ZnCl2 will comprise = (70.90/136.28) * 6.8
= 3.537 g of chlorine
70.90 g of Cl comprise 6.022*10^23 chlorine, thus, 3.537 g of Cl will comprise (6.022*10^23/70.90) * 3.537
= 0.300 * 10^23 ions of chlorine.
what structural units make up iconic solids
Answer:
the structural units are anions and cations bonded together by strong, non-directional ionic bonds
Use the periodic table to correctly describe the arrangement of electrons in an oxygen atom. Check all of the
boxes that apply.
Answer:
second option and last option
Explanation:
Know how to do an electron configuration. This is correct because it adds up to 8 and is in the correct order.
All valence electrons are in the last shell. In this case, 2p is the last shell.
Answer:
It's the second and the second to last
Explanation:
How does a dna molecule make a copy of itself
Answer:
See below
Explanation:
The process through which DNA replicates itself in the course of the cell division shall be DNA replication. There was a mistake. A 'Y' shape is generated by the separation of the two individual DNA strands called a 'field' replication. These two different strands act as models for the creation of new DNA strands
Hope this helps.