jessie is selling bows at the local craft fair. She charges $3 for a small bow and $5 for a large bow. At the end of the day, Jessie had sold a total of 18 bows, and made $70. How many of each size bow did jessie sell

Answer:

8/100

Step-by-step explanation:

first we will find the value of 10^-2

to find negative exponents we turn into a fraction like this

1/10^2

and simplify

1/100

0.01

now to find 64^1/2

we use the formula pictured below

(2√64)^1

8^1

8

and now we multiply

8x0.01

0.08

turn it into a fraction

8/100

hopes this helps

The three angle bisectors of a triangle are concurrent. Their point of concurrence is called the incenter.

The triangle's three angle bisectors are contemporaneous, which means they cross at the same place.

The incenter is the location where the angle bisectors coincide.

1. The circle's inscribed center is known as the incenter.

2. The incenter is equidistant from the triangle's sides.

More examples of agreement

The centroid is the location where all of a triangle's medians meet.

The triangle's circumcenter is where the perpendicular bisectors of its sides meet.

The intersection of the perpendiculars emanating from the vertices on the opposing sides of a triangle is known as the orthocentre.

Know more about incenter

https://brainly.com/question/1831482

#SPJ4

   The value of  [tex]P(68 < \bar{X} < 70)[/tex] is  0.759298

What is average/mean ?

The middle number, which is determined by dividing the sum of all the numbers by the total number of numbers, is the average value in mathematics. When determining the average for a set of data, we add up all the values and divide this sum by the total number of values.

Given mean [tex]\mu[/tex]=69.5 , S=3

Consider  [tex]P(68 < \bar{X} < 70)[/tex]

              = P[ (68-69.5)/(3/√20) < ( [tex]\bar{X} -\mu[/tex] )/(S/√n) < (70-69.5)/(3/√20) ]

              =  P ( -2.23607 < Z < 0.74535 )

              = P ( Z< 0.7453) - P(Z < -2.2360 )

              = 0.77197 - 0.01267

              = 0.759298

Hence,  [tex]P(68 < \bar{X} < 70)[/tex] =  0.759298

To learn more about the average from the given link

https://brainly.com/question/1136789

#SPJ4

height of men in america have a normal distribution with a mean of 69.5  inches and a standard deviation of 3 inches. In a random sample of 20 adult men in the united states find [tex]P(68 < \bar{X} < 70)[/tex]

The corresponding values of x and y is (4, -2), (0, 0) and (2, 10).

What is an equation?

In mathematics, an equation is a formula that expresses the equality of two expressions, by connecting them with the equals sign =.

The given equation is y=2x²+x.

substitute the value of x to get the corresponding value of y

When x = -2

y = 2x² + x

= 2(-2)² + (-2)

= 2(4) - 2

= 6 - 2

= 4

(x, y) = (4, -2)

When x = 0

y = 2x² + x

= 2(0)² + 0

= 2(0) + 0

= 0 + 0

= 0

(x, y) = (0, 0)

When x = 2

y = 2x² + x

= 2(2)² + 2

= 2(4) + 2

= 8 + 2

= 10

(x, y) = (2, 10)

Therefore, the corresponding values of x and y is (4, -2), (0, 0) and (2, 10).

To learn more about an equation visit:

https://brainly.com/question/14686792.

#SPJ1

The analyst could use the geom_jitter() function to make the points easier to find.

It is difficult for the analyst to distinguish the individual points on the plot because they overlap.

In this question we have been given a data analyst creates a scatterplot with a lot of data points. It is difficult for the analyst to distinguish the individual points on the plot because they overlap.

We need to find a function that could the analyst use to make the points easier to find.

We know that overplotting is caused due to discreteness in smaller datasets.

A function geom_jitter() adds a small random variation to the location of each point, which is a useful way of handling overplotting.

Whereas the function geom_point() adds a layer of points to given plot, which creates a scatterplot.

Therefore, geom_jitter() make the points easier to find.

Learn more about the scatter plot here:

brainly.com/question/29231735

#SPJ4

The analyst could use the geom_jitter() function to make the points easier to find.

It is difficult for the analyst to distinguish the individual points on the plot because they overlap.

In this question we have been given a data analyst creates a scatterplot with a lot of data points. It is difficult for the analyst to distinguish the individual points on the plot because they overlap.

We need to find a function that could the analyst use to make the points easier to find.

We know that overplotting is caused due to discreteness in smaller datasets.

A function geom_jitter() adds a small random variation to the location of each point, which is a useful way of handling overplotting.

Whereas the function geom_point() adds a layer of points to a given plot, which creates a scatterplot.

Therefore, geom_jitter() makes the points easier to find.

Learn more about the scatter plot here:

brainly.com/question/29231735

#SPJ4

Answer:

Undefined

Step-by-step explanation:

in order to find the slope we can plug it into the slope formula:

k=(y1-y2)/(x1-x2) where the line contains points (x1,x2) and (y1,y2)

So we plug in

it's equal to -6-4/3-3 which is -10/0 which is undefined because we can't divide by 0

Leopard Company’s fiscal year ends on October 31. If the company uses a periodic inventory system, it will record transactions for the few days before and after October 31 as follows:

Leopard Company will record the transactions for the few days before and after October 31 as they occur and will adjust the inventory balance at the end of the fiscal year.Leopard Company will record sales and purchases as they occur, regardless of the fiscal year-end. However, since the company uses a periodic inventory system,

it will need to take a physical count of its inventory at the end of the fiscal year and adjust the inventory balance accordingly. The purpose of this adjustment is to ensure that the inventory balance on the balance sheet accurately reflects the quantity and cost of goods available for sale.

This adjusting entry is important to ensure accurate financial statements and to provide an accurate representation of the company's financial position.

To know more about balance sheet click on the link below:

https://brainly.com/question/26323001#

#SPJ11

The intersection of a triangle's three medians is known as the centroid. It is always inside the triangle since it is the center of mass (or center of gravity).

A triangle's three perpendicular bisectors all meet at this same location. The circumcenter is the location where each perpendicular bisector intersects the other. 1. The circumcenter, or center of the circle, is where the circle is bounded.

Because of this, the circumcenter may be located either inside or outside the triangle. The two points of concurrency that are able to do that are the circumcenter and orthocenter.

An intersection of three or more lines is known as a point of concurrency. The four points of concurrency are the centroid, the orthocenter, the circumcenter, and the incenter. The point of concurrency where a triangle's three medians cross is known as the centroid.

To learn more about triangle refer to:

https://brainly.com/question/1058720

#SPJ4

Part A: 3.5x6 feet

14x3=42   24x3=72

42/12=3.5   72/12=6

Part B: 21 square feet

3.5x6=21

Part A: The dimensions of the print are 3.5 feet (width) and 6 feet (length).

Part B: The area of the print is 21 square feet.

We have,

Part A:

Width of the print: 14 inches * 3 = 42 inches

Length of the print: 24 inches * 3 = 72 inches

Convert inches to feet by dividing by 12.

Width of the print in feet: 42 inches / 12 = 3.5 feet

Length of the print in feet: 72 inches / 12 = 6 feet

Part B:

Area of the print:

= 3.5 feet * 6 feet

= 21 square feet

Therefore,

The dimensions of the print are 3.5 feet (width) and 6 feet (length).

The area of the print is 21 square feet.

Learn more about rectangles here:

https://brainly.com/question/15019502

#SPJ4

Answer: 17500 miles

Step-by-step explanation:

The probability of randomly drawing a consonant is 5/8

From the question, we have the following parameters that can be used in our computation:

D, E, C, I, M, A, L, S,

In the above word, we have

Consonant = 5

Letters = 8

So, we have

Probability of consonant = 5/8

Hence, the required probability is 5/8

Read more about probability at

https://brainly.com/question/251701

#SPJ1

Answer: the answer is 5/8

Step-by-step explanation:

If you use the 5 letters

At the end of 2018, the world population was approximately 7.53 billion people. This figure is calculated by taking the total population at the end of 2017, 7.4 billion people, and multiplying it by the population growth rate of 1.07%..

This means that the world population increased by approximately 130 million people in 2018. This population growth rate is consistent with the average growth rate of the world population over the last decade. While the population growth rate has been decreasing over the past few decades, it is still relatively high at 1.07%.

The high population growth rate is primarily due to high fertility rates in developing countries and a longer life expectancy in developed countries. This means that more people are born and fewer people die each year. As a result, the total population of the world increases each year.

know more about population here

https://brainly.com/question/27991860#

#SPJ11

The integrating factor is x³, and the general solution is y = x⁹/12 + C/x³. When putting y(1) = 9, the initial value problem's solution is y = x⁹/12 + 107/12x³.

Now, the equation given to us is:

[tex]y' + 3x^{-1}y = x^8\\[/tex]

Since the equation is not seperable by variables, therefore we have to use the integrating factor method (IF Method).

The ordinary linear differential equations are represented in the following general form:

y’ + P y=Q or dy/dx + P(x) y = Q(x)

Integrating factor is defined as the function which is selected in order to solve the given differential equation. It is most commonly used in ordinary linear differential equations of the first order.

When the given differential equation is of the form;

dy/dx + P(x) y = Q(x)

then the integrating factor is defined as:

μ = [tex]e^{\int{Px} \, dx }[/tex]
where P(x) (the function of x) is a multiple of y and μ denotes integrating factor.

For this equation, the Integrating Factor is:

IF = [tex]e^{3\int{\frac{1}{x} }\, dx }[/tex] = x³

Multiplying both sides of the equation by the IF,

μy' + μ3x^{-1}y = μx^8

x³y' + 3x²y = x¹¹

On solving it, we get the general solution as:

y = x⁹/12 + C/x³

We know that the initial value is y(1) = 9

Substituting y = 9 when x = 1 in the general value,

9 = 1/12 + C/1

C = 9 - 1/12 = 107/12

Therefore, the particular solution is

y = x⁹/12 + 107/12x³

Thus, the integrating factor is x³, and the general solution is y = x⁹/12 + C/x³. When putting y(1) = 9, the initial value problem's solution is y = x⁹/12 + 107/12x³.

To learn more about integrating factor in differential equations, visit the link:

brainly.com/question/15049305

#SPJ4

(1)a total of 28  ways the student can select 3 writing implements

2)A total of 25 ways the selection be made if no more than one ballpoint pen is selected.

For the first question, the student has three different types of writing implements and thus three different ways to make a selection. The student can choose any combination of three pencils, three ballpoint pens, or three felt-tip pens. This is known as a combination problem and can be solved using the combination formula. The combination formula, which is often written as "n choose k" (where n is the number of objects and k is the number of objects to be selected), can be used to calculate the total number of possible combinations.

In this case, the student has 4 pencils, 3 ballpoint pens, and 1 felt-tip pen, so the combination formula would be (4 choose 3) + (3 choose 3) + (1 choose 3). This simplifies to 28, meaning that there are 28 possible ways the student can select 3 writing implements.  

For the second question, the student is limited to selecting no more than one ballpoint pen. Since the student can only select one ballpoint pen, the combination formula would now be (4 choose 3) + (2 choose 3) + (1 choose 3). This simplifies to 25, meaning that there are 25 possible ways the student can select 3 writing implements without selecting more than one ballpoint pen.

To know more about combination refer to the link  brainly.com/question/28720645

#SPJ4

The instantaneous acceleration at time t = 11.25 s is a = 8 m/s².  

What is acceleration?

A definition of acceleration is the speed at which velocity varies with respect to time. Since acceleration has both a magnitude and a direction, it is a vector quantity. Additionally, it is the first derivative of velocity with respect to time or the second derivative of position with respect to time.

The graph for the acceleration points are given.

Instantaneous acceleration is defined as the ratio of change in velocity during a given time interval such that the time interval goes to zero.

From graph instantaneous acceleration at time 11.25s is 8 m/s².  

Therefore, the value is obtained as a = 8 m/s².  

To learn more about acceleration from the given link

https://brainly.com/question/460763

#SPJ4

The greater angle has a measurement of 152 degrees. The smaller angle has a measurement of 28 degrees.

An angle is a figure in Euclidean geometry created by two rays, called the sides of the angle, that share a common termination, called the vertex of the angle. Angles created by two rays are located in the plane containing the rays. Angles are also generated when two planes intersect. These are known as dihedral angles. An angle is formed by joining two rays (half-lines) that have a shared terminal. The latter is referred to as the angle's vertex, while the rays are referred to as the angle's sides, legs, and arms. An angle is a figure in Plane Geometry generated by two rays or lines that share a common endpoint.

Here,

x+y=180

x=y/4-10

y/4-10+y=180

y+4y=190*4

5y=760

y=152°

x=28°

The measure of the larger angle is 152 degree. The measure of the smaller angle is 28 degree.

To know more about angle,

https://brainly.com/question/11202302

#SPJ4

The system of equation have 0 = 0, so this system must have infinitely many solutions.

The system of equations are:

-x(1) + 3x(2) - 2x(3) = 4,

-x(1) + 4x(2) − 3x(3) = 5,

-x(1) + 5x(2) - 4x(3) = 6

An approach for resolving networks of linear equations is called Gaussian elimination, commonly referred to as row reduction. It comprises of a series of operations carried out on the relevant coefficients matrix.

[tex]\left [ \begin{matrix}-1 &3 & -2\\ -1 &4 &-3 \\ -1&5 & -4\end{matrix} \right ]\begin{bmatrix}x(1)\\ x(2)\\ x(3)\end{bmatrix}=\begin{bmatrix}4\\ 5\\ 6\end{bmatrix}[/tex]

The matrix is in the form of

[A][X] = [D]

To solve the matrix we represent the matrix in the form of [A : D]

Now writing the augmented matrix

[tex]\left [ \left.\begin{matrix}-1 &3 & -2\\ -1 &4 &-3 \\ -1&5 & -4 \end{matrix}\right| \begin{matrix}4\\5 \\6 \end{matrix}\right ][/tex]

Now solving the matrix

R(2)→R(2) - R(1) and R(3)→R(3) - R(1)

[tex]\left [ \left.\begin{matrix}-1 &3 & -2\\ 0 &1 &-1 \\ 0&2 & -2 \end{matrix}\right| \begin{matrix}4\\1 \\2 \end{matrix}\right ][/tex]

R(1)→R(1) - R(3)

[tex]\left [ \left.\begin{matrix}-1 &1 & 0\\ 0 &1 &-1 \\ 0&2 & -2 \end{matrix}\right| \begin{matrix}2\\1 \\2 \end{matrix}\right ][/tex]

R(3)→R(3) - 2R(2)

[tex]\left [ \left.\begin{matrix}-1 &1 & 0\\ 0 &1 &-1 \\ 0&0 & 0 \end{matrix}\right| \begin{matrix}2\\1 \\0 \end{matrix}\right ][/tex]

Now we can see that the last every elements are zero, which shows

0 = 0

So the system of equation have infinitely many solutions.

To learn more about Gaussian elimination link is here

brainly.com/question/12090959

#SPJ4

The complete question is:

Attempt to solve the system

-x(1) + 3x(2) - 2x(3) = 4,

-x(1) + 4x(2) − 3x(3) = 5,

-x(1) + 5x(2) - 4x(3) = 6,

using gaussian elimination and explain why this system must have infinitely many solutions.

Answer:

the answers are D and C they both look like triangle T

Answer:

B&F

Step-by-step explanation:

T bottom is 2 squares, side is 3 squares,

so we just need to look for all the shapes with multiples of 2 & 3

Count each, if base is 2 multiple by 2, 3, 4, etc.,

then side must be multiplied by the same

so only B & F satisfy this rule

The value of the modulus function is g ( x ) = | x | - 4

Regardless of the sign, a modulus function returns the magnitude of a number. The absolute value function is another name for it.

It always gives a non-negative value of any number or variable. Modulus function is denoted as y = |x| or f(x) = |x|, where f: R → (0,∞) and x ∈ R.

The value of the modulus function is always non-negative. If f(x) is a modulus function , then we have:

If x is positive, then f(x) = x

If x = 0, then f(x) = 0

If x < 0, then f(x) = -x

Given data ,

Let the absolute value function be represented as f ( x )

Now , the value of f ( x ) is

f ( x ) = | x |   be equation (1)

Now , the function f ( x ) is shifted vertically down by 4 units

Down by d units: y = f(x) - d

Substituting the values in the equation , we get

Let the translated function be represented as g ( x )

g ( x ) = f ( x ) - 4

On simplifying the equation , we get

g ( x ) = | x | - 4

Hence , the transformed function is g ( x ) = | x | - 4

To learn more about modulus function click :

https://brainly.com/question/13682596

#SPJ1

The number of cubes that would be needed to be added to turn the shape into a solid 3x4x4 cuboid would be = 24 cubes.

A cuboid is defined as the type of quadrilateral that has 6 faces, 8 vertices, and 12 edges.

The volume of the cuboid;

volume of the cuboid;= l×w×h

= 3x4x4

= 48cm³

The volume of each cube = 1cm×1cm×1cm

The number of cubes available= 24 cubes

Therefore the remaining cubes = 48-24 = 24 cubes.

Learn more about cuboid here:

https://brainly.com/question/29568631

#SPJ1

D (2,-3)

Just look where the lines meet

Answer: D IS CORRECT

Step-by-step explanation:

Answer:

y<=5

Step-by-step explanation:

Answer:

The w-intercept of the line of fit is 2.75, and it means that a kitten who is just born is predicted to weigh 2.75 ounces. This is because the equation of the line of fit is w = 2.75 + 0.2d, where w is the weight of the kitten in ounces and d is the age of the kitten in days. When d = 0, the equation becomes w = 2.75, so the w-intercept is 2.75.

Step-by-step explanation:

mark as brainliest

The values of x that make the given vectors orthogonal are xi = 5 and xi = -2.

The dot product of two vectors is equal to zero when the vectors are orthogonal. Thus, to find the values of X such that the given vectors are  orthogonal, we must set the dot product of the two vectors to zero and then solve the resulting equation. The dot product of two vectors is calculated by taking the sum of the product of the corresponding components of the two vectors. In this case, the dot product of the two vectors is calculated as:

(xi + 2xj) • (xi - 5j) = xi2 + 2xixj - 5xi - 10xj

Setting this equal to zero and solving for x, we obtain

xi2 + 2xixj - 5xi - 10xj = 0

Subtracting 2xixj from both sides, we get

xi2 - 5xi - 10xj = -2xixj

Factorizing the left-hand side, we get

(xi - 5)(xi + 2) = -2xixj

Setting the two factors on the left-hand side equal to zero and solving for x, we get

xi - 5 = 0  => xi = 5

and

xi + 2 = 0  => xi = -2

Thus, the values of x that make the given vectors orthogonal are xi = 5 and xi = -2.

Learn more about dot product here:

https://brainly.com/question/29619659

#SPJ4

9 kilometers represents the distance from one point to another point. 9 kilometers is equal to 5.59234073013601 miles.

What is the unit of distance?

Any arbitrarily selected and widely used reference standard for length measurement is referred to as a unit of length. The metric system, which is adopted by every nation on earth, is the most widely used in modern times. The American customary units are also in use in the United States.

The S.I. unit of distance is kilometers.

Given that the distance between the two points is 9 kilometers.

1 kilometer is equivalent to 0.621371 miles

9 kilometers is equivalent to 0.621371×9 miles

                                              = 5.59234073013601 miles

To learn more about unit, click on the below link:

https://brainly.com/question/27519813

#SPJ4

for a uniform probability density function, the height of the function is determined by the constant value that the function takes over the interval of definition, and it is determined by the requirement that the integral of the function over the interval of definition must be equal to

1. The height of a uniform probability density function over an interval [a,b] is given by:

f(x) = 1/(b-a) for a <= x <= b

where b-a is the length of the interval.

A uniform distribution is a continuous probability distribution and connected to the events which are likely to occur equally. A uniform distribution is explained by two parameters, a and b, where a is the minimum value and b is the maximum value.

To know more about Probability:

https://brainly.com/question/30034780

#SPJ4

The values in the table do not represent a proportional relationship. The y-values are not a constant multiple of the corresponding x-values.

A proportional relationship exists between two variables when one variable is equal to a constant multiple of the other variable. In the given table, if x increases by 1 unit, the corresponding increase in y is not always the same.

For example, when x increases from 1 to 2, y increases by 2 units (from 3 to 5), but when x increases from 2 to 3, y increases by only 1 unit (from 5 to 6). This lack of a constant ratio between x and y means that the relationship between the two variables is not proportional.

The applicability of proportional relationships depends on the specific problem and the nature of the relationship between the variables being considered. In some cases, a proportional relationship may not be the best model to describe the relationship between variables, and alternative models may be more appropriate.

Learn more about Proportional Relationship Assessment here:

https://brainly.com/question/30370493

#SPJ4

The magnitude of the net force Fnet on the negative charge due to all other charges is 1102.5 N. So, correct option is (a).

Forces are caused by interactions between objects, and they can result from a variety of sources, such as gravitational attraction, electromagnetic interactions, and friction. Forces can be balanced, meaning that the sum of all forces acting on an object is equal to zero, or they can be unbalanced, meaning that the sum of all forces is not equal to zero. Unbalanced forces cause changes in an object's velocity and acceleration, and they can result in changes in an object's position, direction, and speed.

In physics, forces play a central role in our understanding of the world and the laws of motion. They are used to describe the behavior of objects in motion and to analyze the interactions between objects. The study of forces and the interactions between objects is known as mechanics, and it forms the foundation of classical physics.

Overall, the concept of force is a fundamental and important idea in physics and is used to describe and understand the behavior of objects in motion and the interactions between objects.

To know more about motion visit:

https://brainly.com/question/28554700

#SPJ4

The speed of the truck in km/h at the end of this distance is equal to 81.43 km/h.

The time elapsed is equal to 0.7939 seconds.

In order to determine the speed of the truck in km/h at the end of this distance, we would apply the third equation of motion:

v² = u² + 2as

Where:  

Next, we would convert the value of deceleration in m/s² to km/h² as follows;

Deceleration, a = 6.5 × 60⁴/1000 = -84,240 km/h².

Distance, s = 20/1000 = 0.02 m.

Substituting the given parameters into the third equation of motion, we have;

v² = 100² + 2(-84,240)(0.02)

Speed, v = √(10,000 - 3,369.6)

Speed, v = √6,630.4

Speed, v = 81.43 km/h.

Lastly, we would determine the time by using the first equation of motion:

V = U + at

Time, t = (V - U)/a

Time, t = (100 km/h - 81.43 km/h)/6.5

Time, t = [(100 × 1000/3600) - (81.43 × 1000/3600)]/6.5

Time, t = (27.78 - 22.62)/6.5

Time, t = 5.16/6.5

Time, t = 0.7939 seconds.

Read more on time here: https://brainly.com/question/30318572

#SPJ1

Complete Question:

The driver of a pick up truck going 100 km/h applies the brakes, giving the truck a uniform deceleration of 6.50 m/s^2 while it travels 20.0 m.

a. What is the speed of the truck in km/h at the end of this distance?

b. How much time has elapsed?