Answer: 143.48 moles of copper will be produced.
Explanation:
We are given:
Number of particles of copper (I) sulfate = [tex]4.32\times 10^{25}[/tex]
According to the mole concept:
[tex]6.022\times 10^{23}[/tex] number of particles is contained in 1 mole of a compound
So, [tex]4.32\times 10^{25}[/tex] number of particles will be contained in = [tex]\frac{1}{6.022\times 10^{23}}\times 4.32\times 10^{25}=71.74mol[/tex] of copper (I) sulfate
The given chemical equation follows:
[tex]Fe+Cu_2SO_4\rightarrow FeSO_4+2Cu[/tex]
By the stoichiometry of the reaction:
If 1 mole of copper (I) sulfate produces 2 moles of Cu
So, 71.74 moles of copper (I) sulfate will produce = [tex]\frac{2}{1}\times 71.74=143.48mol[/tex] of Cu
Hence, 143.48 moles of copper will be produced.
El suero fisiológico tiene una concentración de 8,78 gr/lt. Calcula la masa de NaCl que ingresa en el organismo de un paciente al que se le administra suero durante 4 hs con una velocidad de goteo de una gota por segundo (Volumen gota: 0,05 ml)
Un paciente que recibe suero fisiológico a una velocidad de infusión de 1 gota = 0,05 ml por segundo recibirá en 5 horas 790 grs de NaCl, tomando en cuenta que la solución acuosa de suero fisiológico contiene 0,878 grs/mL de NaCl.
Explicación
Los datos que se tienen son:
Concentración de NaCl 0,878 grs/mlVolumen de la gota: 0,05 ml/gotaVelocidad de infusión 1 gota/ seg = 60 gotas/ min = 3 ml/minTiempo de infusión = 5 horas = 300 minutosYa establecidas las respectivas conversiones se trata de determinar qué volumen de suero fisiológivo se ha infundido al paciente en 5 horas
Si se infunden 3 ml cada minuto, ¿Cuánto se habrá infundido en 300 minutos?
3 ml ______________ 1 min
X ________________ 300 min
X = (300 min x 3 ml) / 1 min
X = 900 ml
Como en 5 horas el paciente ha recibido 900 ml de suero, se determina la cantidad de NaCl que se encuentra en ese volumen de líquido
0,878 grs __________ 1 ml
X ________________ 900 ml
X = (900 ml x 0,878 grs) / 1 ml
X = 790 grs de NaCl
What would you need to do to calculate the molality of 10 mol of NaCl in 200
mol of water?
A. Convert the 10 mol of NaCl to kilograms of NaCl.
O B. Convert the 200 mol of water to liters of water.
C. Convert the 200 mol of water to kilograms of water.
D. Convert the 10 mol of NaCl to grams of NaCl.
Put these atoms in order from most negative overall charge to least negative
overall charge.
11 Atom X: 104 protons, 102 electrons
11 Atom B: 24 protons, 18 electrons
1 Atom Q: 15 protons, 16 electrons
11. Atom P: 7 protons, 10 electrons
Answer:
3 Protons, 2 Neutrons, & 3 Electrons. Is the charge of this atom positive, negative, or neutral?
Explanation:
Put these atoms in order from most negative overall charge to least negative
overall charge.
11 Atom X: 104 protons, 102 electrons
11 Atom B: 24 protons, 18 electrons
1 Atom Q: 15 protons, 16 electrons
11. Atom P: 7 protons, 10 electrons
Compare the energy requirements of a 50 year old woman and 50 year old man.
Explanation:
For both men and women, the basics of a balanced diet are the same. Men have higher caloric requirements than women since they have a bigger body (both in height and weight) and more muscular mass.
So, Men needs more energy.
50 year old woman require less energy than 50 year old man.
The most common carrier of communicable diseases are
a.cockroach
b.housefly
c.mosquito
d.spider
housefly
Explanation:
Because it one of the affective vector of disease carrier and it always roam towards wastes and dirty materials likely to get attracted . And it carries contagious disease from hospitals , infected patients , etc .
How are conduction, convection, and radiation different? Conduction transfers thermal energy by . Convection transfers thermal energy by . Radiation transfers thermal energy by .
Answer:
See explanation
Explanation:
There are three modes of heat transfer; conduction, convection and radiation.
Conduction refers to the transfer of heat without the actual movement of the particles of matter.
Convection is the transfer of heat by the actual movement of the particles of matter.
Radiation is the transfer of heat without a material medium.
Hence the three modes of heat transfer differ in the actual mechanism by which heat energy is transferred as shown above.
Answer:
The movement of molicules
The movement of a fluid
Electromagnetic Waves
Explanation:
Trust me
If a reaction occurs, what will be the products of the unbalanced reaction below?
Cu(s) + Ni(NO3)2(aq)
The Activity Series of Elements
A.
CuNi(NO3)4(s)
B.
Ni(s) + Cu(NO3)2(aq)
C.
No reaction will occur.
D.
CuNi(s) + NO2(g)
Cu(s) + Ni(NO3)2(aq) ⇒Ni(s) + Cu(NO3)2(aq)
The answer is option B.
What is electrochemical series?
Electrochemical or hobby series when the electrodes (metals and non-metals) in touch with their ions are organized on the idea of the values of their preferred discount potentials or standard oxidation potentials, the resulting series is called the electrochemical.
The electrochemical series is built up by means of arranging various redox equilibria so as of their fashionable electrode potentials (redox potentials). The maximum poor E° values are placed at the pinnacle of the electrochemical series, and the maximum wonderful at the lowest.
Learn more about chemical equation here:-https://brainly.com/question/11231920
#SPJ2
Solubility of which salts does not dependent on temperature.Any three.
Answer:
any salt
sodium chloride
callcium chloride
potassium chloride
Explanation:
There is no general effect of temperature on the solubility of salts.effect of increase temperature on the solubilty of NaCl is not significant because it is more soluble even at low temperature. The salt like potassium iodide (KI) has negative heat of solution so it's solubility decreases with increase of temperature…
how to make a sponge
Answer:
Synthetic sponges are made of three basic ingredients: cellulose derived from wood pulp, sodium sulphate, and hemp fiber. Other materials needed are chemical softeners, which break the cellulose down into the proper consistency, bleach, and dye.
Explanation:
IDK, BUT HOPE IT HELPS?
The reversible reaction, 4HCl(g) + Si (s) ⇌ SiCl4 (l) + 2H2 (g) , would be classified as a ______________ reaction.
exothermic
endothermic
homogeneous
heterogeneous
Answer:
endothermic
Explanation:
endothermic reactions absorb heat from their surroundings, in this reaction the reactants are gas and solid and the products are liquid and gas, implying heat was absorbed to turn a solid to a liquid.
How many moles of atoms does H2O
write your 5 ways how to you can help earth
Answer:
any 5 ways to prevent earth are:
1.using ( 3R) principles Reduce, reuse, and recycle.
2.Educate yourself
3.Conserve water resources and other natural resources
4.Use long-lasting light bulbs.
5.stop deforestation and start afforestaion
Locations Cost of land Cost of equipment Cost of mining and reclamation Time taken to mine the area 1 $100,000 $10,000 $5,000 per day 30 days 2 $35,000 $6,000 $4,500 per day 45 days 3 $30,000 $7,500 $3,500 per day 120 days 4 $40,500 $8,000 $7,000 per day 65 days Considering all costs, which location will cost the least to the company to mine?
Answer:
Location 2 will cost the least to the company to mine.
Explanation:
a) Data and Calculations:
Locations Cost of land Cost of Cost of mining Time taken to
equipment and reclamation mine the area
1 $100,000 $10,000 $5,000 per day 30 days
2 $35,000 $6,000 $4,500 per day 45 days
3 $30,000 $7,500 $3,500 per day 120 days
4 $40,500 $8,000 $7,000 per day 65 days
Locations Cost of land Cost of Cost of mining Total
equipment and reclamation Costs
1 $100,000 $10,000 $150,000 ($5,000 * 30) $260,000
2 $35,000 $6,000 $202,500 ($4,500 * 45) $243,500
3 $30,000 $7,500 $420,000 ($3,500 * 120) $457,500
4 $40,500 $8,000 $445,000 ($7,000 * 65) $503,500
Describe what is happening within the system when it is at equilibrium in terms of concentrations, reactions that occur, and reaction rates.
Answer:
Describe what is happening within the system when it is at equilibrium in terms of concentrations, reactions that occur, and reaction rates.
Explanation:
The chemical equilibrium state is the state where the rate of forward reaction becomes equal to the rate of backward reaction.
At this stage the change in concentration of reactants becomes equal to the change in concentration of products.
The reaction will never cease.
That is the reason chemical equilibrium is called dynamic equilibrium.
So, forward and backward reactions will be taking place continuously at equal rates.
Cotton plant is mainly harvested at flowering stage true false
Explain the sharing of electrons between a water molecule that forms four hydrogen bonds with the other four water molecules
Answer:
The sharing of electrons between a water molecule that forms four hydrogen bonds with the other four water molecules:
Explanation:
The hydrogen bond is a weak electrostatic force of attraction that exists between a covalently bonded H-atom and a highly electronegative atom like N,O or F.
In the case of the water molecule,
the highly electronegative atom is Oxygen and the intermolecular hydrogen bond in water is as shown below:
Thus H-bond is a weak electrostatic attraction formed between H-atom and O-atom in water.
can someone do this step by step
Answer:
No
Can't understand.
Pls follow me and Mark as brainliest Plsssssssss.
Calculate the average atomic mass for element X
Answer:
39.02
Explanation:
From the question given above, the following data were obtained:
Isotope A:
Mass of A = 38
Abundance of A (A%) = 9.67%
Isotope B:
Mass of B = 39
Abundance of B (B%) = 78.68%
Isotope C:
Mass of C = 40
Abundance of C (C%) = 11.34%
Isotope D:
Mass of D = 41
Abundance of D (D%) = 0.31%
Average atomic mass of X =?
The average atomic mass of X can be obtained as follow:
Average = [(Mass of A × A%)/100] + [(Mass of B × B%)/100] + [(Mass of C × C%)/100] + [(Mass of D × D%)/100]
= [(38 × 9.67)/100] + [(39 × 78.68)/100] + [(40 × 11.34)/100] + [(41 × 0.31)/100]
= 3.6746 + 30.6852 + 4.536 + 0.1271
= 30.02
Thus, the average atomic mass of X is 39.02
Which statement is the best description of a chemical bond
Answer:
What are your given options? I can't answer unless I know those :)
Explanation:
True or false, In a neutral atom of an element, the number of protons always equals the number of electrons.
Answer:
true
Explanation:
As an atom with no charge have same number of proton and electrons
give me a fully balanced equation of lead monoxide and nitric acid
Answer:
Explanation:
Lead Monoxide: PbO
Nitric Acid: HNO3
PbO + 2 HNO3 ---> Pb(NO3)2 + H2O
Answer:
Explanation:
mono mean single so lead monoxide is PbO
nitric acid is HNO3
both Pb n O are double-charged while H n NO3 are single
so balanced eqn is:
PbO + 2HNO3 -> Pb(NO3)2 + H2O
Help me please guys
Answer:
D. 2
Explanation:
On the right side of the equation:
Al has 1, Zn has 3, NO3 has 6
But on the left side:
Al has 1, Zn has 1, NO3 has 3
1. So, if we add a coefficient of 2 to Al(NO3)3, then NO3 now has 6-which is what it needs.
2. But now the Al on the right side of the equation is not balanced, so give it a coefficient of 2.
3. To make the Zn balance, just add a coefficient of 3 on the left side of the equation.
Which leaves us with:
2Al + 3Zn(NO3)2 --> 2Al(NO3)3 + 3Zn
And now there are the same number of each compound on both sides of the equation.
Good luck! If you have any questions on this answer leave a comment :)
8. A saturated solution of Ag Croq has a silver-ion concentration of 1.3 x 10-4M. Which is the Ksp of Ag CrO 4?
O 1.3 x 10-4
O 3.9 x 10-12
O 6.5 x 10-5
O 1.1 x 10-12
Answer: The [tex]K_{sp}[/tex] of [tex]AgCrO_{4}[/tex] is [tex]1.1 \times 10^{-12}[/tex].
Explanation:
Given: [tex][Ag^{+}] = 1.3 \times 10^{-4} M[/tex]
The reaction equation will be written as follows.
[tex]Ag_{2}CrO_{4} \rightleftharpoons 2Ag^{+} + CrO^{2-}_{4}[/tex]
This shows that the concentration of [tex]CrO^{2-}_{4}[/tex] is half the concentration of [tex]Ag^{+}[/tex] ion. So,
[tex][CrO^{2-}_{4}] = \frac{1.3 \times 10^{-4}}{2}\\= 0.65 \times 10^{-4} M[/tex]
The expression for [tex]K_{sp}[/tex] of this reaction is as follows.
[tex]K_{sp} = [Ag^{+}]^{2}[CrO^{2-}_{4}][/tex]
Substitute values into the above expression as follows.
[tex]K_{sp} = [Ag^{+}]^{2}[CrO^{2-}_{4}]\\= (1.3 \times 10^{-4})^{2} \times 0.65 \times 10^{-4}\\= 1.1 \times 10^{-12}[/tex]
Thus, we can conclude that the [tex]K_{sp}[/tex] of [tex]AgCrO_{4}[/tex] is [tex]1.1 \times 10^{-12}[/tex].
A 15.8 g sample contains 3.60 g F, 4.90 g H, and 7.30 g C. What is the percent composition of hydrogen in this sample?
Answer: 22.7848% F or 23%
Explanation: %F = 3.6g/15.8g • 100% = 22.7848% F
The percentage composition of hydrogen in the given sample is equal to 31%.
What is percentage composition?The percentage composition of a given compound can be described as the ratio of the quantity of each element to the total quantity of individual elements in the compound multiplied by 100. The quantity can be measured in terms of grams of the elements present in the sample.
The percent composition is expressed in its composition in terms of all the elements present. Thus, it helps in the chemical analysis of any given compound.
The percentage composition is expressed using the following formula,
Percentage composition of E = (E/T) × 100
Where E represents the total quantity of element E present in the compound and T represents the total quantity of all the elements present in the compound.
Given, the mass of the F, H, and C is 3.60g, 4,90 g, and 7.30 g respectively.
The total mass of the given sample = 15.8 g
The mass of the hydrogen in the sample = 4.90 g
The percent composition of H = (4.90/15.8) × 100 = 31 %
Therefore, the percent composition of hydrogen in this sample is 31%.
Learn more about percent composition, here:
https://brainly.com/question/11952337
#SPJ2
what is the formula of silver sulphate
Answer:
Ag2SO4
Explanation:
State whether the following statement is true or false. If false, then rewrite
1. Melting of ice is a physical change.
Answer:
True
Explanation:
A physical change is a change of state. So when ice melts it changes from a solid to a liquid so it is a physical change
A 80°C la presion de vapor del benceno (C6H6) es de 1 atm. Calcula la cantidad de hexano (C6H14) que debemos añadir a 200g de benceno para que su presion de vapor sea de 700mm de Hg
Answer:
18,9g de hexano son necesarios
Explanation:
Basados en la ley de Raoult, la presión de vapor ejercida por una solución es:
P = P°*Xsolvente
Donde P es la presión de la solución deseada = 700mmHg, P° la presión de vapor de vapor del benceno = 1atm = 760mmHg y X es la fracción molar del solvente (Benceno).
Reemplazando:
700mm Hg = 760mmHg * X(Benceno)
0.9211 = X(Benceno)
La fracción molar de benceno se define como:
X = Moles benceno / Moles benceno + Moles hexano
Moles benceno -Masa molar: 78g/mol-
200g * (1mol/78g) = 2.5641 moles benceno
X = Moles benceno / Moles benceno + Moles hexano
0.9211 = 2.5641 moles benceno / 2.5641 moles benceno + Moles hexano
0.9211moles Hexano + 2.3618 = 2.5641
0.9211*Moles Hexano = 0.2023
Moles hexano = 0.2023/0.9211 = 0.2196 moles hexano.
Masa Hexano -Masa molar: 86g/mol-
0.2196 moles hexano * (86g/mol) =
18,9g de hexano son necesariosLa cantidad de hexano (C6H14) que se debe agregar a 200 g de benceno para permitir que la presión de vapor se convierta en 700 mm de Hg sería:
18.9 g
Usando la ley de Raoult, la presión de vapor que libera una solución se encuentra por:
P = P ° × X disolvente
Donde (P) denota la presión de la solución deseada
P ° denota la presión de vapor del benceno y
X denota la fracción molar del disolvente (benceno).
En el caso dado,
(P) = 700 mmHg,
P° = 1atm = 760mmHg
Fracción molar de benceno = 0,9211 (∵ 700/760)
La fracción molar de benceno (X) = Moles de benceno/Moles de benceno + Moles de hexano
Moles de benceno - Masa molar: 78g / mol - 200 g × (1 mol / 78 g)
= 2.5641 moles de benceno
X = Moles de benceno/Moles de benceno + Moles de hexano
0.9211 = 2.5641 moles Benceno/2.5641 moles Benceno + Moles de Hexano
⇒ 0,9211 × moles de Hexano + 2,3618 = 2,5641
⇒ 0.9211 × moles de Hexano = 0.2023
∵ Moles de Hexano = 0.2023/0.9211
[tex]= 0.2196 moles[/tex]
[tex]Hexane mass - Molar mass = 86g/mol - 0.2196 mole hexane[/tex] × [tex](86g/mole)[/tex]
[tex]= 18.9g[/tex]
Por tanto, 18,9 g es la respuesta correcta.
Learn more about "Benzene" here:
brainly.com/question/25798187
Calculate the average atomic mass for element X(please help)
Answer:
Wt Avg At Mass = 39.0229 amu
Explanation:
The Weight Average Atomic Mass in atomic mass units (amu) is the sum of the Weight Average Mass contributions of each isotopic mass. That is,
Wt. Avg. At. Mass (amu) = ∑ Wt. Avg. Contributions of each isotopic mass
Wt. Avg. Contribution = fractional abundance x isotopic mass(amu)
For this problem data:
Isotope %Abundance fractional Isotopic Wt Avg Isotopic
abundance mass(amu) Contribution (amu)
1 9.67% 0.0967 38 3.6746 amu
2 78.68% 0.7868 39 30.6852 amu
3 11.34% 0.1134 40 4.5360 amu
4 0.31% 0.0031 41 0.1271 amu
________________________________________________________
Wt. Avg. Atomic Mass (amu) = ∑ Wt. Avg. Contributions = 39.0229 amu
Heat is most closely related to which kind of energy?
O nuclear
electrical
thermal
chemical
Answer:
C thermal
Explanation:
convert 300g into kg
Answer:
0.3kg
Explanation: