Interpreting Graphics
11. Look at the model of an atom below. Does the
model represent a metal atom or a nonmetal
atom? Explain your answer.
ng

Interpreting Graphics11. Look At The Model Of An Atom Below. Does Themodel Represent A Metal Atom Or

Answers

Answer 1
answer:
This is a metal atom

explanation:
metal atoms have fewer electrons in their outer shells than non-metal atoms do.
Answer 2

By looking at the model shown in the problem one can clearly say that this model represents the metal because there are a total of 12 electrons revolving around the nucleus which clearly represents the Magnesium metal.

What are metalloids?

The elements of the periodic tables that behave as metals, as well as the nonmetal in some chemical or physical aspects, are known as metalloids. Some examples of metalloids are Boron, silicon, germanium, arsenic, antimony, tellurium, etc.

As given in the problem, there is a graphical representation of the model of an atom,

One can see that the model in the problem accurately depicts the metal by looking at the total of 12 electrons circulating around the nucleus, which is a clear representation of the magnesium metal.

To learn more about metalloids here, refer to the link given below

brainly.com/question/2548493

#SPJ5


Related Questions

i swimmers swims 180m in 20 seconds how much meters does she swim in a second

Answers

Answer:

20

Explanation:

20m= 1 seconds

40m= 2 seconds

180÷9=20

What is the anomalous expansivity of water

Answers

Answer:

The anomalous expansion of water is an abnormal property of water whereby it expands instead of contracting when the temperature goes from 4°C to 0°C, and it becomes less dense. The density becomes less and less as it freezes because molecules of water normally form open crystal structures when in solid form.

when energy from battery was added to water, were the gases produced by this made of the same particles as those produced from heating the water?

Answers

Batteries often convert chemical energy directly to electrical energy.

From the experiment, the constructed conclusion was that;

The Two different gases with  different properties  are made from adding energy from a  battery to water.

The particles that make up these different  gases is different from each other. They  are different than the ones that were  made from heating water.  

The matter that is composed of  substances have to originate from matter that  made up some of the original water particles.

When energy from a battery is added to water, two streams of gas bubbles is said to be  produced. Then a lit match is put into  trapped gas from these two sources, one pops and the other glows brighter.

The study was to test the  flammability of gases produced by providing energy to water with electricity.

Learn more from

https://brainly.com/question/14448085

What is an electron cloud 5th grade short answer.

Answers

Answer:

the system of electrons surrounding the nucleus of an atom

A block with a mass of 6.0 kg is
held in equilibrium on an incline
of angle θ = 30.0° by a horizontal
force, F, as shown in the figure.
Find the magnitudes of the
normal force on the block and of F. (Ignore friction.)

Answers

(a) The normal force on the block is 50.92 N.

(b) The horizontal force on block keeping it in equilibrium is 29.4 N.

The given parameters;

mass of the block, m = 6 kgangle of inclination, θ = 30.0°

The normal force on the block is calculated as follows;

[tex]F_n = W \times cos(\theta)[/tex]

where;

W is the weight of the block

[tex]F_n = mg \times cos(\theta)\\\\F_n = 6 \times 9.8 \times cos(30)\\\\F_n = 50 .92 \ N[/tex]

The horizontal force on block keeping it in equilibrium is calculated as follows;

[tex]F- F_x = 0\\\\F-mgsin\theta= 0\\\\F = mgsin\theta\\\\F = 6 \times 9.8 \times sin(30)\\\\F = 29.4 \ N[/tex]

Learn more here:https://brainly.com/question/24860178

When the sum of all the forces acting on a block.

Answers

Answer:

finish the question pls

Explanation:

Mxcbccbhf chucklingbdbfbfndbfnf

Answers

Answer:

4 seconds

Explanation:

On the Y axis - you go to 12. Go directly horizontally till you hit the line. Then go directly down. If you do this correctly, you should hit 4 seconds on the X axis.

A catamaran with a mass of 5.44×10^3 kg is moving at 12 knots. How much work is required to increase the speed to 16 knots? (One knot = 0.51 m/s.)


show all steps

Answers

The work that is required to increase the speed to 16 knots is 14,176.47 Joules

If a catamaran with a mass of 5.44×10^3 kg is moving at 12 knots, hence;

5.44×10^3 kg = 12 knots

For an increased speed to 16knots, we will have:

x = 16knots

Divide both expressions

[tex]\frac{5.44 \times 10^3}{x} = \frac{12}{16}\\12x = 16 \times 5.44 \times 10^3\\x = 7.23\times 10^3kg\\[/tex]

To get the required work done, we will divide the mass by the speed of one knot to have:

[tex]w=\frac{7230}{0.51}\\w= 14,176.47Joules[/tex]

Hence the work that is required to increase the speed to 16 knots is 14,176.47 Joules

Learn more here: https://brainly.com/question/25573786

31. TRUE or FALSE A cheese puff must contain C since CO2 was produced when it was burned,

I

Answers

Answer:

True

Explanation:

Work is required to lift a barbell. How many times more work is required to lift the barbell 2 times as high

Answers

Answer:

2 time

Explanation:

when distance double the work double

si el atomo anterior de litio eléctricamente neutro ¿cuantos electrones deberia tener?

Answers

debe ser de tres electrones

What is the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod

Answers

Answer:

C) 5ML^2

Explanation:

2 Spheres of mass M

Bug's mass 3M

Rod length 2L, radius L

Find Rotational Inertia I

I=Σmr^2

I=(3M+M+M)L^2

I=5ML^2

The rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².

Rotational inertia of the system

The rotational inertia of the system is determined by summing all the masses together and multiply with the radius.

I(t) = Σmr²

Where;

m is the massr is the radius

I(t) = Inertia of the 2 spheres + inertia of the bug

I(t) = (M + M)L²  + (3M)L²

I(t) = 2ML² + 3ML²

I(t) = 5ML²

Thus, the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².

Complete question is below:

There are 2 Spheres of mass M and Bug's mass 3M. The Rod length is 2L, radius L.

Learn more about rotational inertia here: https://brainly.com/question/14001220

A 34. 8 n object is in free fall. What is the magnitude of the net force which acts on the object? answer in units of n.

Answers

Answer:

-34.8n

Explanation:

when object in free fall, only force is the Force by weight,

which is 34.8 and direction is down.

What is the best reference point for the car that is not in motion

Answers

Answer:

A reference point is a place or object used for comparison to determine if something is in motion. An object is in motion if it changes position relative to a reference point.

Explanation:

Bella wants to know which mode of transportation is the fastest for getting from her home to the grocery store. She can drive her car, ride her bike, walk, or charter a helicopter.
Independent variable
Dependent variable
Controlled variables
Hypothesis

Answers

Based on the question, the following applies:

Independent variable: Time Dependent variable: Mode of transportationControlled variable: Distance traveledHypothesis: IF Bella charters a helicopter, THEN she will get to the grocery store faster.

VARIABLES IN AN EXPERIMENT:

The following are definitions of some variables in an experiment:

Independent variable in an experiment is the variable that is altered or changed by the experimenter. Dependent variable is the variable that is measured or recorded in an experiment. Controlled variable is the variable that is kept constant or unchanged throughout the experiment.

According to this question, Bella wants to know which mode of transportation is the fastest for getting from her home to the grocery store. The following are the variables in this experiment:

Independent variable: Time Dependent variable: Mode of transportationControlled variable: Distance traveledHypothesis: IF Bella charters a helicopter, THEN she will get to the grocery store faster.

Learn more about experimental variables at: https://brainly.com/question/10415158

2Cu + 02 —> 2Cuo
In the equation above, what is the
coefficient of the oxygen molecule?
A) O
B) 1
C) 2.
D) 4

Answers

Answer:

C

Explanation:

PLS HELP ASAP it's just 2 questions and they are multiple choice!

Answers

It’s the first option heat factories (A)

A skydiver that has a weight of 1050 N. jumps from a plane at an altitude of 5000 m. How much work is performed on the skydiver?​

Answers

Answer:

5.25MJ

Explanation:

Considering the weight of the skydiver constant over the descent -ie, the acceleration of gravity not decreasing as you go up the earth surfice, the work is simply the product of the two:

[tex]w= \vec F\cdot \vec x = Fx = 1050\times 5000 = 5,250,000 = 5.25MJ[/tex]

How long would it take a 500 w electric motor to do 150,000 j of work

Answers

Explanation:

300 second = 5 minutes

details

500 watts = 500 joules per second

Time = (1.50 x 10^5 joules)/(5 x 10^2 joules per second) = .3 x 10^3 seconds =300 second

We know the power is equal to the work done over time (that is, P=W/t)

Plugging in the given values, 500=150000/t
=> t=300 s

Name 3 things you have in your home that you could use to make an electromagnet.

Answers

Answer:

radio TV set and telephone

In what part of the electromagnetic spectrum do the biggest telescopes on earth operate?.

Answers

Explanation:

Notice it says above that the largest optical telescopes in the world are reflectors. Optical telescopes collect visible light. Even larger telescopes are built to collect light at longer wavelengths radio waves.

There are many isotopes of the element technetium (TC).
What do the nuclei of different technetium isotopes have in common?
[

Answers

Answer:

hikknn says he is not happy birthday hun

An object of mass 10 kg is moving along positive x- axis with velocity 5 m/s. At some point it breaks into two parts of 6 kg and 4 kg. 6 kg moves making 600 with x –axis and 4 kg moves making -300 with axis. What is velocity of their centre of mass after breaking?

Answers

Explanation:

Correct option is

B

−3m/s

2

Given,

m=10kg

u=10m/s

v=−2m/s

t=4sec

The acceleration is rate of change of velocity,

a=

t

v−u

a=

4

−2−10

a=

4

−12

=−3m/s

2

The correct option is B.

solar power generates electricity from what source

Answers

Solar power generates electricity from the sun.

how long does it take saturn to rotate on its axis

Answers

Answer:

Orbit and Rotation

One day on Saturn takes only 10.7 hours (the time it takes for Saturn to rotate or spin around once), and Saturn makes a complete orbit around the Sun (a year in Saturnian time) in about 29.4 Earth years (10,756 Earth days).

Explanation:

What is equilibrium?​

Answers

Answer:

Balance is the ability to maintain body balance when placed in various positions.

----------------------------------------

[tex] \green{ \boxed{ \boxed{ \sf{Lusi \: Adriana} } } } [/tex]

Hope it is Useful..

Answer:

A state of physical balance.

I hope this helps you!!!

A 75.0 kg man pushes on a 500,000 kg wall for 250 s but it does not move.

Answers

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The work done in the given case is 0

[tex] \large \boxed{ \mathfrak{Step\:\: By\:\:Step\:\:Explanation}}[/tex]

For calculating the work done by an object we apply the formula, that is ~

[tex]f \times s \times \cos( \theta) [/tex]

where f represents force applied, and s represents displacement.

but here, the displacement is zero since the wall didn't move at all, Therefore If we plug it's value as 0, we get

[tex]f = 0 \times s \times \cos( \theta) [/tex]

hence,

[tex]work \: done = 0[/tex]

Solution:Here, though the man is applying force on the wall, the work done is zero. This is because work is said to be done only when a force acting on a body produces motion in it in the direction of the force applied. Here, the man is trying to push the wall with a great force. He might fell exhausted after some time and say that he has done a lot of work. But in terms of physics, he has done no work because the force applied by the person has not produced any displacement. We know, work done = force × displacement. If displacement is zero, then work done is zero.

So therefore, we can conclude that the man hasn't done any work.

Hope it helps.

Do comment if you have any query.

The product of pressure and volume of any gas equals a constant, k. What variable(s) must not change in order for the value of k to remain constant

Answers

The variable is temperature

if a substance changes from a vapor to a liquid it ____ HELP FAST

Answers

Answer:

Explanation:

Condensing is the word used to indicate the change of state of a substance from vapor to liquid, as in this case. During condensation, the substance releases thermal energy to the environment, therefore the kinetic energy of the molecules in the vapor decreases until they become closer to each other and they start to be affected by the intermolecular forces and so the substance becomes a liquid.

What unit of pressure in ideal gas law.

Answers

essure is measured in pascals ( Pa ) — sometimes expressed as newtons per square metre ( N⋅m-2 ). These mean exactly the same thing. Be careful if you are given pressures in kilopascals ( kPa ). For example, 150 kPa = 150 000 Pa
Other Questions
1A pencil weighing 1N is sitting on a desk.Write down all the forces on the desk.a.b.Draw a free body diagram of the desk.c.Add up the forces in the x-direction (horizontal) and the y-direction (vertical) How do air particles move above a candle flame what is the perimeter of a pool that is 30 meters long and 18 meters wide? Do the following tasks by the help of STATA software. You need to devote first 30 minutes of your time for these tasks.a)Use auto.dta which is an example dataset for this question. The study claims that average price of foreign cars is more than average price of domestic cars. Check validity of this claim by using dataset. Explain and mention all steps that are necessary for decision. (4 points)b)Use nlsw88.dta. Find the standard deviation, the mean and the number of observation of age variable (age) for the people who work less than 32 hours (hours variable) or wage is greater than 10. (4 points)c)Open example datasets that we have in the memory of STATA and choose lifeexp.dta. Find the standard deviation, the mean and the number of observation of safewater variable (safewater) for the countries with GNP variable (gnppc) greater than 5000 and life expectancy (lexp) is greater than 55. (4 points)d)Open example datasets that we have in the memory of STATA and choose lifeexp.dta. We have 6 different variables in this dataset. Which variable has string values? Which STATA command is used in order to find the string values in dataset? What are the effects of large amount of string values in dataset? halfway between -23 and 23 For reviewing purposes. harry potter or ronald wesley who is we are never ever getting back together about which one is correcta.b.c. Which of the following statements BEST describes photosynthesis?A) Photosynthesis uses light energy to convert carbon dioxide and oxygen to glucose and water.B) Photosynthesis uses light energy to convert carbon dioxide and water to glucose and oxygen.C) Photosynthesis uses light energy to convert glucose and carbon dioxide to oxygen and water.D) Photosynthesis uses light energy to convert glucose and oxygen to carbon dioxide and water. Which question does the resource best answer? Why is learning about cultures important? How can cultural perspectives help people communicate? What are some ways to learn about cultures? What are some of the characteristics of culture? when are BCG and DPT administrated to the child How can regular participation in physical activity improve an individual's overall health?A.Regular participation in physical activity reduces the risk of developing various diseases.B.Regular participation in physical activity allows an individual to function on less sleep.C.Regular participation in physical activity reduces the need for a balanced diet.D.Regular participation in physical activity prevents an individual from developing certain diseases.Please select the best answer from the choices provided.ABCD PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ HELP AND NI FILES A collective good offers particularized benefits while private goods are broadly distributed. True False What is the slope of the line whose equation is 12=4x6y?Please and thanks if you decide to answer. A sound wave is an example of a __________ wave. It requires a _________ to transfer energyQuestion 2 options:medium, longitudinallongitudinal , medium medium, transversetransverse, medium elisa graduated from college with a double major and was inducted What are the two factors that affect the gravitational pull between two objects? You can wash a car 1.5 times as fast as your friend. Working together, the two of you can wash 1 car in 6 minutes. How long does it take each of you to wash the car when working alone? Leave your answer as a fraction!