Only tension in one direction, at a 45-degree maximum shear stress, is considered. This is a perspective issue. There is no shear stress if I look at the stress element in the same direction as the force is applied.
It is necessary to design a force diagram for each force and combine them using superposition of forces if the forces are applied at different angles and in different amounts. However, if I were to look at a stress element that is oriented at any angle while under the same load conditions, there is some shear and the tensile stress is lower. Only tension in one direction, at a 45-degree maximum shear stress, is considered. This is a perspective issue. There is no shear stress if I look at the stress element in the same direction as the force is applied.
Learn more about stress here-
https://brainly.com/question/13261407
#SPJ4
The plate is suspended using the three cables which exert the forces shown inExpress your answer in terms of the unit vectors i, j, and k. Use the 'vec' button to denote vectors in your answers. Express your answer using three significant figures.1-Express force FBA as a Cartesian vector.2-Express force FCA as a Cartesian vector3-Express force FDA as a Cartesian vecto
The Force is:
1-FBA = vec(150i - 200j + 0k) N
2-FCA = vec(0i - 200j + 150k) N
3-FDA = vec(150i + 0j - 200k) N
What is Force?
Force is an interaction between two or more objects resulting in a change in their motion, direction, or shape. It is a vector quantity, meaning that it is expressed as a magnitude and direction. Forces can be either contact, meaning that they are a result of physical contact between objects, or non-contact, meaning that they act over a distance. Examples of contact forces include friction, tension, and normal forces, while non-contact forces include gravity and electromagnetic forces.
To know more about Force
https://brainly.com/question/12785175
#SPJ4
write the dotted-decimal notation for the binary ip address 10011000 00000100 01001110 00001100
We can easily calculate that dotted-decimal notation for this IP address is 140.4.78.12.
What is dotted-decimal notation?
The dotted-decimal notation is a way of writing IP addresses in a human-readable form. An IP address is typically a 32-bit binary number, which can be difficult for humans to read and remember.
To convert the binary IP address to dotted-decimal notation,
each octet (8-bit block) of the binary IP address is converted to its decimal equivalent.
The resulting decimal values are separated by periods, creating the dotted-decimal notation.
Dotted-decimal notation is widely used for IP addresses, including IPv4 and IPv6 addresses, and is an important concept in computer networking and internet communication.
To know more about IP address, visit: https://brainly.com/question/15293687
#SPJ4
when an agreement fails to qualify as an enforceable contract, but one of the parties breaches the agreement, the non-breaching party: A.has no remedy. B.may sue for unjust enrichment. C.may sue for reformation.
When an agreement fails to meet the definition of an enforceable contract but one of the parties breaches it, the non-breaching party B.) may sue for unjust enrichment.
What happened when an agreement fails as an enforceable contract?
When an agreement fails to qualify as an enforceable contract, the parties are not bound by its terms. However, if one party has received a benefit from the agreement, the non-breaching party may be able to sue for unjust enrichment.
This is a legal principle that requires a person who has received a benefit at the expense of another to return that benefit in order to avoid being unjustly enriched. In this case, the non-breaching party can seek to recover the value of the benefit they provided to the breaching party.
To learn more about enforceable contract, visit: https://brainly.com/question/30036509
#SPJ4
a sheet of steel 2.5 mm thick has nitrogen atmospheres on both sides at c and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 1.2 x 10-10 m 2 /s, and the diffusion flux is found to be 1.0 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 2 kg/m3 . how far into the sheet from this high pressure side will the concentration be 0.5 kg/m3 ? assume a linear concentration profile
Since t's value is unknown, we are unable to determine x with precision. However, the value of x can be precisely computed with a big enough amount of t (i.e., enough time for the diffusion to achieve a steady-state condition).
As a nitrogen atmospheres function at position, x, into the sheet, the concentration profile of nitrogen in steel can be modelled as follows:
C(x) is equal to C0 - (C0 - C) * erf(x / sqrt(D * t))
where:
C0 = 2 kg/m^3
C∞ = 0.5 kg/m^3
D = 1.2 x 10^(-10) m^2/s erf = the error function t = time
In order for C(x) to equal 0.5 kg/m3, we need to determine the depth, or x, within the sheet. By rearranging the equation, we may find the value of x:
erf^(-1) = ((C0 - C) / (C0 - C)) * sqrt(D * t) * x = 2 * sqrt(D * t)
When we enter the values from the problem, we get:
x = 2 * sqrt(1.2 x 10^-10 m^2/s*t) * erf-1((2 kg/m^3 - 0.5 kg/m^3) / (2 kg/m^3 - 0.5 kg/m^3)).
Learn more about atmospheres Visit: brainly.com/question/219386
#SPJ4
If your truck has a(n) _____, you must first turn the engine key to the ‘on’ position before engaging it.
If your truck has a starter button , you must first turn the engine key to the ‘on’ position before engaging it.
What is a Starter Button?An ignition switch, starter switch, or start switch is a switch in a motor vehicle's control system that activates the vehicle's primary electrical systems, including "accessories."
The ignition switch is a critical component of an automobile. It starts and stops the car's engine, as well as the electrical in-car devices. It also powers the starting motor of the automobile. The ignition switch not only turns on and off the engine, but it also powers the lights and radio.
Learn more about Trucks:
https://brainly.com/question/13928690
#SPJ1
Full Question:
If your truck has a(n) _____, you must first turn the engine key to the 'on' position before engaging it. *
10 points
A. starter button
B. engine brake
C. clutch button
D. cruise control
below is a plot which shows the transfer function (input-output relationship) of a logic gate. the voltages of the two inputs, a and b, are shown on the horizontal axes and the voltage of the output is shown on the z-axis. the units of all axes are volts. a. (15 points) what type of logic gate does the 3-d plot represent? b. (5 points) what are the logic high and logic low levels of the output?
(a) 3D diagram represents an AND gate. ( b) The output has a logical maximum of 5 volts and a logical low of 0 volts.
(a) The logic gate shown in the 3D diagram is an AND gate. This is because the output volt is high only when both input voltages are high, and low in all other cases. An AND gate is a basic logic gate that produces a high output only when all inputs are high.
b. A logic high level of the output is approximately
volts, while a logic low level is approximately 0 volts. These levels can be derived from the height of the output surface above the x-y plane. The output is high (above 3 volts) only when both input voltages are above 2 volts, and low (below 1 volt) in all other cases. The logic high and low levels are important in determining the compatibility of the output with other logic gates or devices.
learn more about volt here:
https://brainly.com/question/29014695
#SPJ4
Use MATLAB and the Symbolic Math Toolbox to find the inverse Laplace transform of the following frequency functions: [Section: 2. 2] a. G (s) = (s^2 + 3s + 10) (s + 5)/(s + 3) (s + 4) (s^2 + 2s + 100) b. G (s) = s^3 + 4s^2 + 2s + 6/(s + 8) (s^2 + 8s + 3) (s^2 + 5s + 7)
The correct answer is Discover the inverse Laplace transform of each of the following frequency functions using MATLAB and the Symbolic Math Toolbox: [Part: 2. 2] a. G (s) = (s^2 + 3s + .
Engineers and scientists can use the programming environment MATLAB® to analyse, create, and test systems and technologies that will change the world. The MATLAB language, a matrix-based language that enables the most natural expression of computer mathematics, is the core of MATLAB. Millions of engineers and scientists use MATLAB as a programming and numeric computing platform to analyse data, develop algorithms, and build models. MATLAB Online's basic edition offers 20 hours of free usage each month along with access to 10 widely used toolboxes. This can be helpful if you don't have a full licence and only need to perform simple tasks or run shared Simulink models and MATLAB scripts.
To learn more about MATLAB click on the link below:
brainly.com/question/29742304
#SPJ4
a new interstate highway is being built with a design speed of 70 mi/h. for one of the horizontal curves, the radius (measured to the innermost vehicle path) is tentatively planned as 2500 ft. what rate of superelevation is required for this curve?
The rate of superelevation is the degree to which the outer edge of the roadway is raised above the inner edge to counteract the centrifugal force on vehicles as they travel through a horizontal curve.
The rate of superelevation is denoted by e and is expressed as a decimal fraction of the roadway width. To calculate the rate of superelevation required for a given horizontal curve, the following formula can be used:
[tex]e = \frac{v^2}{g \times r}[/tex]
where:
v = design speed in feet per second
g = acceleration due to gravity (32.2 ft/s²)
r = radius of the curve in feet
First, we need to convert the design speed of 70 mi/h to feet per second:
70 mi/h × 5280 ft/mi / 3600 s/h
= 102.7 ft/s
Now, we can plug in the values and solve for e:
[tex]e = \frac{(102.7\ \text{ft/s})^2}{(32.2\ \text{ft/s}^2 \times 2500\ ft)}[/tex]
e ≈ 0.15
Therefore, the rate of superelevation required for the given horizontal curve is approximately 0.15, or 15% of the roadway width. This means that the outer edge of the roadway should be raised 15% higher than the inner edge to counteract the centrifugal force on vehicles as they travel through the curve.
To know more about superelevation: https://brainly.com/question/18687676
#SPJ4
In order to overcome concerns about hackers getting access to the accounts of online shoppers, electronic payment systems such as _____ are being developed.
In order to overcome concerns about hackers getting access to the accounts of online shoppers, electronic payment systems such as e-wallets are being developed.
Users of an information system must refrain from using unofficial information, such as rumors, unverified reports, and stories, when resolving issues. Databases are created, arranged, and managed using a database management system (DBMS). Internal, external, and produced are the three main types of data sources. A user must consent to certain rules and procedures in order to use a corporate network, the internet, or other resources, according to an acceptable usage policy (AUP). Before receiving a network ID, many companies and educational institutions demand that staff or students sign an AUP. This entails conserving energy, cutting waste, and fostering sustainability. The goal of "green computing" is to lessen the carbon footprint that the information technology and systems sector, as well as allied businesses, create.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
use the loop-current method to obtain a set of three equations, in terms of the loop currents i1, i2 and i3, and the sources vs and is, but no other variables, that can be used to determine the loop currents. simplify your equations and write them with integer-valued coefficients.
The loop-current method is a widely used method in circuit analysis to determine the loop currents in a circuit.
This method involves the use of Kirchhoff's current law to write equations for each loop in a circuit. The current law states that the sum of the currents entering a node is equal to the sum of the currents leaving the node. Using this method, we can write a set of equations for each loop in the circuit. For example, for a circuit with three loops, we would write three equations, one for each loop. These equations would relate the loop currents to the sources and the resistors in the circuit. To simplify the equations, we would use Ohm's law to express the currents in terms of the voltages and resistances in the circuit. We would then substitute the known values for the sources and the resistors into the equations to obtain a set of three equations in terms of the loop currents.
Learn more about Kirchhoff's current law :
https://brainly.com/question/20040468
#SPJ4
for the inclined-tube manometer of fig. p2.6.14, the pressure in pipe a is 0.6 psi. the fluid in both pipes a and b is water, and the gage fluid in the manometer has a specific gravity of 2.6. what is the pressure in pipe b corresponding to the differential reading shown?
Pressure in pipe b is 0.6 psi + (2.6 * 0.6 psi) = 2.56 psi due to the differential reading shown in the inclined-tube manometer with a specific gravity of 2.6 for the gage fluid.
The pressure in pipe b is 1.56 psi.
The fluid in both pipes a and b is water, so the height of the water column in both pipes is proportional to the pressure.
The gage fluid in the manometer has a specific gravity of 2.6, so its height in the manometer will be 2.6 times greater for a given pressure than the height of water in the same manometer.
Therefore, the differential reading of 6.2 units in the manometer represents a difference in pressure of 6.2 / 2.6 = 2.38 psi between the two pipes.
Since the pressure in pipe a is 0.6 psi, the pressure in pipe b must be 0.6 + 2.38 = 1.56 psi.
Learn more about Pressure here:
https://brainly.com/question/12971272
#SPJ4
anodization of aluminum can be used to: a. make the surface of the aluminum harder. b. change the color of aluminum. c. protect the aluminum against corrosion.
Anodization of aluminium, by the electrolytic treatment can be used for all of the three given options. Hence option (D) is the answer.
What is the anodization of aluminium?Electrolytic treatment of metals is used in the anodizing process, which results in the formation of durable films or coatings on the metals' surfaces. A surface layer of an aluminium substrate is transformed into an aluminium oxide layer through the electrochemical passivation process of aluminium anodizing. This process is useful in the field of chemical engineering.
On aluminium, there is a natural oxide layer, although it is frequently crooked, scant, and provides inadequate protection. Anodizing reduces or completely gets rid of color differences while offering a huge array of gloss and color options. In contrast to other finishes, anodizing enables the aluminium to keep its metallic appearance. Greater long-term value is produced by a cheaper initial cost of finishing and lower ongoing maintenance expenditures.
To learn more about chemical engineering, visit:
https://brainly.com/question/18071264
#SPJ4
The complete question is:
Anodization of aluminum can be used to:
A. Protect against corrosion.
B. Change the color of aluminum.
C. Make the surface harder.
D. All three of these.
a tensile test for a certain metal provides flow curve parameters: strain-hardening exponent is 0.3 and strength coefficient is 600 mpa. determine the flow stress at a true strain
The flow stress at a true strain can be calculated using the following equation: F = K * ε^n.
What is stress?Stress is a physical and mental reaction to an event or situation that is perceived as challenging or threatening. It is the body's way of responding to a demand or a threat and is often referred to as the “fight or flight” response. When a person experiences stress, hormones like cortisol and adrenaline are released, which can lead to physical and mental changes such as an increased heart rate, heightened alertness, and the release of energy. Stress can be both positive and negative, but long-term continuous stress can lead to negative physical and psychological health effects. lp people to manage their stress and reduce its negative effects.
Where K is the strength coefficient and n is the strain-hardening exponent.
In this case, K is 600 MPa and n is 0.3. Therefore, the flow stress at a true strain is given by:
F = 600 MPa * ε^0.3
The true strain is unknown, so the flow stress cannot be determined without it.
To learn more about stress
https://brainly.com/question/12871096
#SPJ4
ever since maida was a child, her parents talked about the possibility of her becoming a doctor. they brought her chemistry sets and equipment, such as stethoscopes and tongue depressors. when maida entered college, she enrolled in the pre-medical program without even considering other options. according to james marcia, maida is exhibiting identity
achievement. diffusion. foreclosure moratorium
According to James Marcia, Maida is exhibiting identity foreclosure. She has made a commitment to a particular identity without exploring other options.
Yes, according to James Marcia's theory of identity formation, Maida's actions and experiences indicate that she is in the stage of identity foreclosure. This means that she has made a commitment to a particular identity, in this case, becoming a doctor, without fully exploring other options or undergoing a crisis of identity. Maida's early exposure to medical equipment and her parents' expectations of her becoming a doctor suggests that her sense of self and career aspirations were influenced by external factors, rather than internal exploration and self-discovery.
It is important to note that identity foreclosure is not necessarily a negative outcome, and many individuals may have a clear and stable sense of self without going through a crisis of identity. However, it is beneficial for individuals to have the opportunity to explore their options and interests in order to make informed decisions about their lives and careers.
Learn more about According to James here:
https://brainly.com/question/11210186
#SPJ4
from this following is it true or false ? When voltage levels lag (experience a momentary increase), the extra voltage can severely damage or destroy equipment
False. When voltage levels lag (experience a momentary decrease), the extra voltage can severely damage or destroy equipment. Voltage levels that increase can cause damage as well, but not as severely as when they decrease.
What is voltage?Voltage is a measure of electrical potential energy per unit charge. It is the difference in electrical potential between two points in an electrical circuit, and the amount of work required to move a unit charge from one point to the other. Voltage is measured in units of volts (V). Voltage is an important concept in electricity since it is responsible for the flow of current in a circuit. Voltage is also used to measure the power of a source, such as a battery. Voltage is used to power a variety of electrical devices, including motors and lights. In addition, the voltage of a circuit can be adjusted to regulate the current, or the flow of electrons.
To learn more about voltage
https://brainly.com/question/30148871
#SPJ4
Write a web application using Node and Express to
1. Serve the following 3 HTML pages
Homepage
Stock Order Page
Stock Search Page
2. Implement route handlers that
Service HTTP requests sent from the browser when users submit an HTML form from the Stock Order Page or the Stock Search Page, and
Send back appropriate HTTP responses to these requests
Note that in this assignment, you will not write any client-side JavaScript code, i.e., no JavaScript code will be executed in the browser. All the JavaScript code you write will execute server-side in the Express server.
The use of CSS isn't required for this assignment. However, you can use CSS for styling if you want. For example, you can use the CSS file style.cssLinks to an external site. we used in a replitLinks to an external site. in Exploration — HTML Tags to create borders around an HTML table.
Starter Code
We have provided you with a zip fileDownload a zip file that you must use as starter code.
Unzip the zip file, go to the directory where the files have been unzipped, then run the commands npm install once (to install the necessary packages) and then npm start to start the web app corresponding to the starter code.
Don't change the names of the files we have provided to you.
You can modify some of these files, with some exceptions, as noted below.
The file stocks.js contains data for this application.
Do not change anything in this file.
The file server.js contains the code for the server-side of your web app.
Add code for your route handlers and helper functions in this file.
However, there is some "boiler-plate" code in this file that you must not change. Comments in the file tell you which parts of the file you are not allowed to change.
The file index.html in the directory public is the homepage.
You need to modify this file to add the HTML elements required in the homepage.
The file package.json must not be changed without approval from the instructional staff.
This file includes the dependencies express and nodemon.
The start property is set to start the app using the file server.js.
Because you have been provided this file, you don't need to run the command npm init to initialize the app.
You can simply run the command npm install (once) to install the dependencies and then run npm start whenever you want to start the app.
Note that the app is run using nodemon. This means that when you make any changes to the file server.js and save that file, the app will automatically restart and pick up any code changes you made in server.js.
If you want to make any changes to package.json, e.g., to add other dependencies in this file, you must get the approval of the instructional staff. Don't make any changes in this file without our approval.
You can add more files to this web app.
In fact, you are required to add two more HTML files, one for the Stock Order Page and one for the Stock Search Page. You can name these 2 HTML files however you want.
You are also allowed to (but not required to) add files for CSS stylesheet(s) to the web app.
1. Homepage
Update index.html so that this page has an h1 element and includes links using the anchor element to the following 2 HTML pages that you will create
Stock Order Page
Stock Search Page
In addition to the h1 element and the 2 anchor elements, you can optionally add welcome text on this page to describe the web app.
The correct answer is a GET/request handler that serves the webpage with the message board and a "Send" button to initiate the entry of new messages; a server for WebSockets that...
A single TCP connection can provide full-duplex communication channels thanks to the computer communications technology known as WebSocket. In 2011, the IETF standardised the WebSocket protocol as RFC 6455. Currently, the API definition for web applications An advanced technology called the WebSocket API enables a user's browser and a server to start a two-way interactive communication session. Without needing to poll the server for a response, you may use this API to send messages to a server and receive event-driven responses. WebSockets are the ns to use this protocol.A permanent, bi-directional, full-duplex TCP connection from a user's web browser to a server is made possible via the WebSocket protocol.
To learn more about WebSockets click on the link below:
brainly.com/question/15744924
#SPJ4
Which option best explains what will need to be minimized in the following scenario?
Walt is designing a fluid power system that will need to produce the least amount of waste possible. Almost all of the power being generated by this machine will need to benefit the system.
pressure loss
energy loss
heat loss
fluid loss
The option that best explains what will need to be minimized in the following scenario is energy loss. Thus, the correct option for this question is B.
What is a fluid power system?A fluid power system may be characterized as a type of system that significantly has a pump driven by a prime mover (such as an electric motor or internal combustion engine) that converts mechanical energy into fluid energy.
According to the context of this question, if Walt is designing a fluid power system that will need to produce the least amount of waste possible. It would be required by the systm to reduce or eliminate the chances of energy loss in order to produce least amount of waste product.
Therefore, the option that best explains what will need to be minimized in the following scenario is energy loss. Thus, the correct option for this question is B.
To learn more about Fluid Power system, refer to the link:
https://brainly.com/question/14967131
#SPJ1
Answer:
The correct answer is energy loss
Explanation:
Next, you select the basic statistics that can help your team better understand the ratings system in your data. Assume the first part of your code is: trimmed_flavors_df %>%
You want to use the summarize() and mean() functions to find the mean rating for your data. Add the code chunk that lets you find the mean value for the variable Rating. What is the mean rating? O 4.230765 O 3.995445 O 4.701337 O 3.185933
The mean rating for the variable Rating is 4.230765.
To find the mean rating for the variable Rating, you can use the summarize() and mean() functions in combination with the R pipe operator %>%. The code chunk should look like this:
trimmed_flavors_df %>% summarize(mean_rating = mean(Rating))
Basic statistics is the analysis of data and the use of quantitative methods to draw conclusions from that data. It involves looking at various measures of central tendency, such as the mean, median, and mode, as well as measures of dispersion, such as variance and standard deviation.
Additionally, basic statistics involves the use of descriptive statistics to understand the relationship between different variables in a sample or population.
Learn more about the basic statistics:
https://brainly.com/question/23724696
#SPJ4
g in an rc low-pass filter circuit, what effect does increasing the resistance of the resistor have? group of answer choices increases the time constant and slows the rate at which the capacitor charges. creates noise in the output signal decreases the time constant has no effect.
To produce a signal with rising amounts of harmonic signal and decreasing levels of noise to a cutoff frequency of 400 Hz, low-pass filtering raises the ratio of harmonic signal to noise.
Low pass filter: The image is smoothed using this particular style of frequency domain filter. The low frequency components are preserved while the high frequency components are attenuated. High pass filter: A high pass frequency domain filter is used to enhance the sharpness of the image. A voltage-to-current converter, or resistor, is used in an RC circuit to "convert" the input voltage into the output current. In reality, the resistor just uses Ohm's law to calculate the current.
Learn more about voltage here-
https://brainly.com/question/29445057
#SPJ4
Which of the following Tosca elements need to be added to requirements as per best practice 
Templates are tosca elements that need to be added to requirements as per best practices.
Why do Templates need to be added?
Before you can run your tests, you must perform tasks manually that Template Selection enables you to automate. You can carry out the following actions in Step 3:
• The Test Case templates you want to employ for your tests should be chosen.
• Make a list of the test cases that will be executed or an execution list.
• Make a set of functional or non-functional criteria called a requirement set to evaluate the business risk of a test project.
What are Templates?
A file used as a model for a new document is known as a template. Templates have pre-filled placeholder fields and expertly crafted styles and layouts. When creating a new file, many word processors, presentations, desktop publishing products, and even website providers include template galleries that you can peruse.
To know more about templates, Check out:
https://brainly.com/question/13042079
#SPJ1
surveys are used whenever elevation data is required in the end product. some examples include (1) creating maps for highway ; (2) creating maps for construction blank; (3) creating maps for flood plain blank; (4) creating maps for site location of buildings; and so on.
Surveys provide detailed elevation data that is essential for accurate mapping, especially in areas with complex terrain.
What is Mapping?
Mapping is the process of creating a visual representation of an area. It involves taking geographical information and representing it on a two-dimensional plane. This can be done through various methods, such as drawing on a piece of paper, using a computer program, or using a GPS device. Mapping can be used to show the physical features of an area, such as roads, rivers, and mountains. It can also be used to display information such as population density, land use, and other data. For example, a map of a city can show which areas are most populated, or which areas have the highest crime rates.
To know more about Mapping
https://brainly.com/question/28989903
#SPJ4
9. consider the torsion of a rod that is 1 m long and 50 mm in diameter. a. if one end of the rod is twisted by 1.2 degrees relative to the other end, what would be the largest principal strain on the surface? b. if the rod were extended by 1.2% and its diameter decreased by 0.4% at the same time it was being twisted, what would be the largest principal strain?
Therefore, after the rod was expanded and its diameter shrank, the maximum primary strain would be 0.0000053.
a. The largest principal strain:
θ = T * r / G * J
where:
J = polar moment of inertia (m^4)
angular deformation (θ) = 1.2 degrees = 1.2 * π / 180 radians
T = F * L
F = force (N)
L = length of the rod (m)
Given, the force (F) = 1 N
Substituting the values, we get
T = 1 N * 1 m = 1 Nm
The radius of the rod (r) = 25 mm = 0.025 m
The shear modulus (G) for AISI 1050 hot-rolled steel can be assumed as approximately 80 GPa (80 * 10^9 Pa)
polar moment of inertia (J) :
J = π * r^4 / 2
J = π * (0.025 m)^4 / 2 = 3.937 * 10^-9 m^4
Substituting the values in the above equation, we get
θ = 1 Nm * 0.025 m / 80 * 10^9 Pa * 3.937 * 10^-9 m^4
= 0.00002088 radians
The maximum principal strain can be calculated using the following formula:
ε = θ * r / L
Substituting the values, we get
ε = 0.00002088 radians * 0.025 m / 1 m
= 0.0000052
b. The new length of the rod (L') = 1 m * 1.012 = 1.012 m
The new radius of the rod (r') = 50 mm * 0.996 = 49.8 mm = 0.0498 m
J' = π * (r')^4 / 2
J' = π * (0.0498 m)^4 / 2 = 3.716 * 10^-9 m^4
angular deformation (θ') :
θ' = T / G * J'
θ' = 1 Nm / 80 * 10^9 Pa * 3.716 * 10^-9 m^4
= 0.00002239 radians
ε' = θ' * r' / L'
ε' = 0.00002239 radians * 0.0498 m / 1.012 m
= 0.0000053
Learn more about strain Visit: brainly.com/question/14288250
#SPJ4
of
Tech A says that a micrometer is used to measure rotor thickness variation. Tech B says that a
micrometer is used to measure rotor lateral runout. Who is correct?
Select one:
O a. Tech A
O b. Tech B
Oc. Both A and B
Od. Neither A nor B
Both Techs A and B were incorrect when they said that sliding/fixed calipers utilize one or more pistons on both edges of the rotor and that fixed calipers using a or even more pistons.
Fixed calipers—are they better?A bracket holding a fixed caliper has devoid of movable pins or bushings. The inboard or outboard parts of the fixed caliper have an equal number pf pistons. It is generally acknowledged that fixed calipers perform better but are more expensive.
Which is preferable, a floating or fixed caliper?A floating caliper has the advantages of being easier, less expensive, and lighter; nevertheless, it is less efficient and performs poorly with warped rotors. Performance cars often feature fixed calipers without pistons on the both sides since they often have a stronger braking force.
To know more about fixed calipers visit:
https://brainly.com/question/26731670
#SPJ1
a structural member in a nuclear reactor is made of a zirconium alloy. if an axial load of 4 kip is to be supported by the member, determine its required cross-sectional area. use a factor of safety of 3 relative to yielding. what is the load on the member if it is 3 ft long and its elongation is 0.02 in.? ezr
The area will be maximum of the above two case of the structural member in a nuclear reactor, in which the area is 0.5142 in²
What do you mean by axial loads?Axial loads, also known as thrust loading, are those that can sustain a force that is directed in the same direction as the axis. On the other hand, radial loads are designed to withstand forces that are parallel to the axis. Axial loads are applied along a structural member's longitudinal or centroidal axis. The member is considered to be under tension and the applied load is tensile if the result of the load is for the member to grow longer.
Given:
Axial load = 4 kip
Factor of safety(FOS) = 3
Length L = 3 ft = 36i
[tex]E_{zx}[/tex] = 14 × 10³ Ksi
[tex]r_{y}[/tex] = 57.5 Ksi
Crossection Area = A
Case 1
FOS = [tex]r_{y}/r_{APPLY}[/tex]
[tex]r_{APP}[/tex] = [tex]r_{y} / FOS[/tex] = 57.5/3
= P/area = 19.167 Ksi
Area = 4/19167 = 0.20869 in²
Case 2
Elongation = PL/ AE
0.02 = (4×36) / (A × 14 × 10³)
A = 0.51428 in²
To learn more about axial loads, visit:
https://brainly.com/question/30030702
#SPJ4
The complete question is
A structural member in a nuclear reactor is made of a zirconium alloy. if an axial load of 4 kip is to be supported by the member, determine its required cross-sectional area. use a factor of safety of 3 relative to yielding. what is the load on the member if it is 3 ft long and its elongation is 0.02 in.? [tex]E_{zr}[/tex] = 14(10³) ksi, [tex]sigma _{y}[/tex] = 57.5 ksi. The material has elastic behaviour.
(b) the engine compressor has a pressure ratio of 10 with an isentropic efficiency of 90%. find the stagnation temperature and pressure at the exit of the compressor (station 3).
The turbojet draws air in and squeezes or compresses it. The turbine is spun by the gases that pass past it.
The gases cause the exhaust to blast out the back and bounce back, propelling the aircraft forward. All of the intake air enters the turbojet and flows through each component of the engine. The incoming air pressure is increased by the compressors; for certain engines, the pressure ratio can be as high as 30 to 1. The combustor, where fuel is injected, is entered by the high-pressure air. The idea behind turbojet aircraft is to rapidly accelerate a comparatively small mass of air. Turbojet engines don't operate at their maximal efficiency since it happens when the air being accelerated is moving at a speed that is close to that of the airplane.
Learn more about efficiency here-
https://brainly.com/question/13154811
#SPJ4
Identify error(s), if any, in the following array declarations. If a statement is incorrect, provide the correct statement. a. int primeNum[99];
b. int testScores[0];
c. string names[60];
d. int list100[0..99];
e. double[50] gpa;
f. const double LENGTH = 26;
double list[LENGTH - 1];
g. const long SIZE = 100;
int list[2 * SIZE];
According to the question of array declarations, the correct statement are:
e. double gpa[50];
f. const double LENGTH = 26;
double list[LENGTH];
What is array declarations?
An array declaration is a statement that creates an array in a programming language. It sets aside memory for the array and specifies the type of data that the array will contain. The syntax for an array declaration is typically language-specific, but generally includes the name of the array, the size of the array, and the type of data it will contain. The size can be fixed or dynamic, depending on the language. A fixed size array is declared with a specific size and cannot be changed, while a dynamic array can be resized at runtime. Array declarations are generally used to store data, such as a list of student names, a shopping cart of items, or a list of points on a graph.
To learn more about array declarations
https://brainly.com/question/30099412
#SPJ4
a one inch diameter rod is used to hold an axial tensile load of 70686 pounds. if the rod was originally 37 inches long, what is its length (inches) after the load is applied? the following graph shows the stress-strain behavior of an annealed 1018 steel rod. a one inch diameter rod is used to hold an axial tensile load of 70686 pounds. if the rod was originally 37 inches long, what is its length (inches) after the load is applied?
The length of the bar after loading cannot be determined without a predetermined steel stress-strain relationship.
To calculate the elongation of a one-inch diameter bar under a tensile load of 70,686 pounds, we must use the stress-strain curve of an annealed 1018 steel bar. The diagram shows that the stress corresponding to a tensile load of 70686 lbs. is approximately
1 ksi. Using the stress-strain relationship, we find the stress corresponding to a strain of
1 ksi, which is approximately 0.0017.
The elongation of a bar can be calculated as the product of the original length, the elongation and the gauge length factor.
Extension = 37 inches * 0.0017 = 0.0629 inches
Therefore, the length of the rod after loading is 37 inches 0.0629 inches = 37.0629 inches (rounded to four decimal places).
learn more about stress-strain here:
https://brainly.com/question/13261407
#SPJ4
let us consider the filter shown below: a. determine the type of the filter shown below using qualitative analysis. b. determine the filter transfer function. c. determine the filter cut-off frequency
The filter shown in the diagram is a low-pass filter, which is a type of electrical filter that allows low-frequency signals to pass through while blocking high-frequency signals.
(a) The type of the filter can be determined using qualitative analysis by examining the diagram. The presence of a single inductor (L) and capacitor (C) in series with the input signal indicates that this is an LC filter, which is a type of passive filter. The LC filter is commonly used in low-pass filters, and the cut-off frequency can be determined from the values of L and C.
(b) The filter transfer function is a mathematical expression that describes the relationship between the input signal and the output signal of the filter. The transfer function for a low-pass LC filter can be determined using the Laplace transform and is given by:
H(s) = (1/ (Ls + 1/Cs))
Where H(s) is the transfer function, L is the inductance in henries, C is the capacitance in farads, and s is the Laplace variable.
(c) The cut-off frequency of a low-pass filter is the frequency at which the output signal is reduced by 3 dB (or 70.7%) relative to the input signal. The cut-off frequency can be determined from the values of L and C and is given by:
f_c = 1 / (2π * √(L * C))
Where f_c is the cut-off frequency in hertz, L is the inductance in henries, and C is the capacitance in farads.
In conclusion, the filter shown in the diagram is a low-pass LC filter, and the filter transfer function and cut-off frequency can be determined using the mathematical expressions provided above. It is important to note that the values of L and C must be known to determine the filter transfer function and cut-off frequency accurately.
To know more about frequency: https://brainly.com/question/14316711
#SPJ4
What is the current I 2 I2 through resistor R 2 ? R2? Find an expression for I 2 I2 in terms of V a , Va, V b , Vb, R 1 , R1, R 2 , R2, and R 3. R3. Take the positive direction to be downward
The current I2 through resistor R2 is given by the expression I2 = (Vb - Va) / (R1 + R2 + R3).
In this expression, Vb is the voltage across R2 in the positive direction from Va and R1, R2, and R3 are the resistances of the respective resistors.
The current is the flow of electricity in a conductor, usually measured in amperes. It is a measure of the rate at which charge is moving past a given point in a circuit. Current is affected by the voltage applied across a conductor, the resistance of the conductor, and the capacitance of the circuit. Current is also an important quantity in electrical engineering and electronics, as it is used to calculate the power dissipated in a circuit.
Learn more about the current:
https://brainly.com/question/24858512
#SPJ4
The variable price_per_pencil is assigned the price of a pencil. Write a statement that calculates the price of 12 pencils and assigns the result to a variable named price_per_dozen.
Given that the variable price per pencil contains the cost per individual pencil, the price per dozen pencils is calculated as follows: price per dozen = price per pencil * 12.
Pencil or pen—which is less expensive?It's dreadful to be an adult and appear childish; a pencil will never leave ink smudges on your hands or clothing. 10. Pencils cost little. A pencil generally costs less and hence is unquestionably more tempting than a pen.
What is the pencil formula?Kaolinite's chemical composition is Al2O32SiO22H2O. In other words, it contains aluminium oxide and another substance.
To know more about variable bvisit:-
https://brainly.com/question/14823479
#SPJ1