The nitrogen atom in the diagram has three lone pairs of electrons. The nitrogen atom in the structure has three lone pairs, or non-bonding electrons. Lone pairs are electron pairs.
in a molecule that do not form bonds with other atoms. Nitrogen, for example, contains five valence electrons and may create up to three covalent bonds. The nitrogen atom in the diagram has three lone pairs of electrons. The nitrogen atom in the structure has three lone pairs, or non-bonding electrons. Lone pairs are electron pairs. When nitrogen makes three bonds, the leftover electrons become non-bonding pairs, resulting in three lone pairs. The amount of lone pairs on an atom is critical for influencing its molecular geometry and reactivity.
learn more about Nitrogen here:
https://brainly.com/question/16711904
#SPJ4
a diver has a compressed air tank that is initially at . the tank is connected to a regulator such that the diver is breathing in air at 760 mmhg. the diver breathes in 0.50 l of air each breath, and takes about 12 breaths per minute. the diver will need to surface when the tank pressure reaches . the tank is made of thick metal and does not change from initial volume of 11 l. calculate the amount of time the diver can stay under water, and enter your answer in hours.
The diver can stay underwater for approximately 0.55 hours.
First, we need to convert the initial pressure and the final pressure to atmospheres (atm).
1 atm = 14.696 psi
So,
initial pressure = 3.0 * 10^3 psi = (3.0 * 10^3) / 14.696 atm = 205 atm
final pressure = 1.0 * 10^3 psi = (1.0 * 10^3) / 14.696 atm = 68 atm
Next, we need to find the volume of air the diver breathes in per minute.
Volume per breath = 0.5 L
Breaths per minute = 12 breaths
Volume per minute = Volume per breath * Breaths per minute = 0.5 L * 12 breaths = 6 L
Finally, we can calculate the time the diver can stay underwater using the ideal gas law.
P1V1 = P2V2
(205 atm) * 11 L = (68 atm) * (11 L + 6 L)
205 atm * 11 L = 68 atm * 17 L
205 * 11 = 68 * 17
2255 = 1176
Dividing both sides by 68, we get:
33 = 17.3
So, the number of minutes the diver can stay underwater is 33 minutes. To convert this to hours, we divide by 60:
Time = 33 minutes / 60 minutes/hour = 0.55 hours
Therefore, the diver can stay underwater for approximately 0.55 hours.
Learn more about Ideal Gas Law here: https://brainly.com/question/28257995
#SPJ4
Complete Question:
A diver has a compressed air tank that is initially at 3.0 * 10^3 psi. The tank is connected to a regulator such that the diver is breathing in air at 760 mmHg. The diver breathes in 0.50 L of air each breath and takes about 12 breaths per minute. The diver will need to surface when the tank pressure reaches 1.0 * 10^3 psi. The tank is made of thick metal and does not change from the initial volume of 11 L. Calculate the amount of time the diver can stay under water, and enter your answer in hours.
rank the compounds according to increasing positive character of the carbon atom.
The compounds can be ranked from least positive to most positive character of the carbon atom as follows:
C < CH3OH < CH3NH2 < CH4 < CH3Li < CH3F.The carbon atom in each of these compounds will have increasing positive character as the molecule moves down the list. The least positive is carbon (C) and the most positive is CH3F.
The carbon atom is the sixth element in the periodic table and has an atomic number of 6. It has four electrons in its outer shell, which can form four covalent bonds. It has four protons in its nucleus, and the most common isotopes are carbon-12 and carbon-14. In nature, carbon can be found in four allotropic forms: diamond, graphite, fullerenes and nanotubes. Carbon is an important element in many organic molecules, including proteins, carbohydrates and lipids, and is essential for life.
Learn more about carbon atom:
https://brainly.com/question/6841018
#SPJ4
liquid octane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . suppose 8.0 g of octane is mixed with 55.2 g of oxygen. calculate the minimum mass of octane that could be left over by the chemical reaction. round your answer to significant digits.
The chemical equation needs to be balanced first. When the equation is balanced, we'll start with merely the chemical formulas and subsequently change their coefficients.
The octane combustion process O2 + C8H18 = CO2 + H2O Eight carbons and eighteen hydrogens are contained in each octane molecule. Since it is the most complex molecule, start there by giving it a coefficient of 1, then locate "homes" for each of its eight carbons O2 + 1C8H18 = CO2 + H2O Considering that CO2 is the sole area where carbons may be found in products, let's assign it an 8-point coefficient: 8CO2 + H2O = 1C8H18 + O2. Find the 18 hydrogen atoms' homes now. Give hydrogen a coefficient of 9 since it only appears in the H2O of a product: O2 + 1C8H18 8CO2 + 9H2O Although the octane atoms have been balanced, it is obvious that we will want a lot more oxygen atoms.
Learn more about Octane combustion here:
https://brainly.com/question/29244359
#SPJ4
an empty container weighs 19.278 g. when the container is filled with water, it weighs 29.107 g including the weight of the container. when the same container is filled with an unknown liquid instead of water, it weighs 32.075 g including the weight of the container. what is the density (in g/ml) of the unknown liquid? assume that the density of water is 0.997 g/ml. round your answer to three significant figures.
The density of the unknown liquid is 2.984 g/ml. It can be calculated by calculate the volume and mass of water first.
To calculate the density of the unknown liquid, we can use the formula:
density = mass / volume
First, we need to find the volume of the container. We can do that by subtracting the weight of the empty container from the weight of the container filled with water:
Volume = (weight of container + water) - (weight of empty container)
= 29.107 g - 19.278 g
= 9.829 g
Next, we need to find the mass of the water in the container:
mass of water = density of water * volume of container
= 0.997 g/ml * 9.829 ml
= 9.813 g
So, the volume of the unknown liquid can be found by subtracting the mass of water from the weight of the container filled with the unknown liquid:
Volume of unknown liquid = (weight of container + unknown liquid) - (weight of empty container)
= 32.075 g - 19.278 g
= 12.797 g
Finally, the density of the unknown liquid can be found by dividing the mass of the unknown liquid by its volume:
density of unknown liquid = mass of unknown liquid / volume of unknown liquid
= (12.797 g - 9.813 g) / (12.797 ml - 9.829 ml)
= 2.984 g/ml
Here you can learn more about density
brainly.com/question/13061166
#SPJ4
practice identifying polar and nonpolar covalent bonds using the amino acid below
The following amino acid, Alanine (Ala), has the chemical formula C3H7NO2. In the amine group of alanine, there is a polar covalent link between the nitrogen (N) and the oxygen (O) (NH2).
the carbon (C) and hydrogen (H) atoms in its alkyl side chain form a nonpolar covalent connection (CH3). Typically, polar covalent connections develop between atoms with various electronegativities, leading to an unbalanced distribution of electrons and a dipole moment. When atoms with comparable electronegativities form nonpolar covalent bonds, the electrons are distributed evenly and there is no dipole moment. In this instance, the electronegativity of the nitrogen atom in the amino acid group is higher than that of the oxygen atom, leading to an unequal distribution of electrons and the formation of a polar covalent connection between them. The alkyl side chain, on the other hand, has carbon and hydrogen atoms with equal electronegativities, which leads to an equitable distribution of electrons and a nonpolar covalent link between them.
learn more about amino acid here:
https://brainly.com/question/28409615
#SPJ4
How can you make an item that is made of magnetic material become a permanent magnet instead of a temporary magnet
You can put it in a very strong magnetic field to make an item that is made of magnetic material become a permanent magnet instead of a temporary magnet. Therefore, option 1 is correct.
What are three ways to make a permanent magnet?Magnets are produced by subjecting ferromagnetic metals such as iron and nickel to magnetic fields. Magnets can be made in three ways: (1) One-touch method (2) Method of two touches (3) Making use of electric current.
A magnetic field is created, and the metal piece is transformed into a magnet by passing electricity through it. Controlling the electric supply changes the strength of the magnetic field.
Thus, option 1 is correct.
To learn more about the permanent magnet, follow the link;
https://brainly.com/question/6458972
#SPJ1
Your question is incomplete, most probably your question was
How can you make an item that is made of magnetic material become a permanent magnet instead of a temporary magnet? *
1.You can put it in a very strong magnetic field. 2.You can heat it while it is being influenced by a magnetic field. 3. You can leave it in the magnetic field of an actual magnet for a long time. 4. You can do any of the above.
would you expect the pka of glycine’s carboxyl group to increase or decrease in the presence of an adjacent carboxylate ion?
The pKa of glycine's carboxyl group would decrease in the presence of an adjacent carboxylate ion.
pKa is a measure of the acidity of a molecule and is defined as the negative logarithm of the dissociation constant (Ka) of an acid.
In simpler terms, pKa tells us how easily a molecule will donate a proton (H+) and become a negatively charged ion. The higher the pKa, the less acidic the molecule is, meaning it is less likely to donate a proton.
When an adjacent carboxylate ion is present, it can form a salt bridge with the positively charged nitrogen in the amino group of glycine. This interaction stabilizes the negatively charged form of the carboxyl group, making it less likely to donate a proton. As a result, the pKa of the carboxyl group decreases, meaning it becomes more acidic.
To know more about pka here:
https://brainly.com/question/14906539#
#SPJ11
in part a what must be done before pb and pw can be added together
Im part A what must be done before Pb and Pw can be added together is that they must be expressed as the same unit of measurement of pressure.
What are units of measurements?Units of measurements are universally accepeted values by which quantities of substances xan be measured.
There are two types of units of measurements:
fundamental units - units for measuring the fundamental quantities of mass, length, time, etc.derived units - these are units for measuring the derived quantities such as area, pressure, volume, etc.Pb and Pw are values that express pressure in different units.
In order to add them together, Pb and Pw must be expressed in similar units.
Learn more about derived and fundamental quantities at: https://brainly.com/question/5308940
#SPJ1
Which pair of elements would you expect to exhibit the greatest similarity in their physical and chemical properties?
a) H, Li
b) Cs, Ba
c) Ca, Sr
d) Ga, Ge
e) C, O
The pair of elements that is expected to exhibit the greatest similarity in their physical and chemical properties is Ca, Sr. (Option C)
Which two elements' physical and chemical characteristics are most comparable to one another?When two different elements share the same number of valence electrons, their chemical characteristics are likely to be comparable. The same column of the Periodic Table contains elements that have the same number of valence electrons.
What two things do elements and compounds have in common?The pure forms of matter are the element and the compound, respectively. The simplest compounds of an element can only be broken down so far because they all contain the same atoms. Elements and compounds have a consistent makeup throughout.
To know more about Periodic Table, visit:
brainly.com/question/7373020
#SPJ4
what is the total amount of energy released when forming the 2 h-h bonds in 2 molecules of the product h2?
The total amount of energy released when forming the two H-H bonds in two molecules of the product H₂ is approximately 104,000 kJ.
The energy released when forming two H-H bonds in two molecules of the product H2 can be calculated using the bond energy of the H-H bond and the stoichiometry of the reaction. The bond energy of the H-H bond is the energy required to break one mole of H-H bonds in gaseous H₂ molecules.
When two H-H bonds are formed in two molecules of H₂, the stoichiometry of the reaction tells us that four hydrogen atoms combine to form two molecules of H₂. Therefore, the energy released in forming two H-H bonds is equal to the bond energy of two H-H bonds times the Avogadro constant, since only two H₂ molecules are formed:
Energy released = (436 kJ/mol) x (6.02 x 10²³ molecules/mol) / 2
= 1.04 x 10⁵ kJ
Learn more about stoichiometry: https://brainly.com/question/30215297
#SPJ4
How many lone pairs of electrons will be present in the following molecules? (You may have to draw the Lewis structures for each molecule)
A) CH3-NH2
B) H2O
C) H2O2
D) HBr
E) XeF4
A) CH3-NH2: 2 lone pairs; B) H2O : 2 lone pairs ; C) H2O2 : 4 lone pairs D) HBr : 3 lone pairs ; E) XeF4 : 0 lone pairs
What is lone pairs?A) CH3-NH2: This is methylamine. It has 3 hydrogen atoms attached to carbon and 2 lone pairs of electrons on the nitrogen atom. Total = 2 lone pairs
B) H2O: This is water. It has 2 hydrogen atoms and 1 oxygen atom, with 2 lone pairs of electrons on oxygen atom. Total = 2 lone pairs
C) H2O2: This is hydrogen peroxide. It has 2 hydrogen and 2 oxygen atoms. Both oxygen atoms have 2 lone pairs of electrons each. Total = 4 lone pairs
D) HBr: This is hydrogen bromide. It has 1 hydrogen atom and 1 bromine atom. The bromine atom has 3 lone pairs of electrons. Total = 3 lone pairs
E) XeF4: This is Xenon Tetrafluoride. Xenon has 8 valence electrons, and each fluorine has 7 valence electrons. Xenon is surrounded by 4 fluorine atoms, with no lone pairs of electrons on xenon atom. Total = 0 lone pairs.
To know more about lone pairs, refer
https://brainly.com/question/25192438
#SPJ4
if ka for ha is 8.0×10−5, what is the value of the equilibrium constant for the reaction between ha and b ?
The value of the equilibrium constant for the reaction between HA (hydrochloric acid) and B (a generic base) can be found using the acid dissociation constant (Ka) of HA.
The reaction between HA and B can be represented as follows:
HA + B ⇌ A- + HB+
where A- represents the conjugate base of HA, and HB+ represents the conjugate acid of B.
The equilibrium constant for this reaction is given by the base dissociation constant (Kb) of B. The relationship between Ka and Kb can be described by the equation:
Kb = Kw / Ka
where Kw is the ion product constant for water (1.0 × 10^-14 at 25°C).
Using this equation, we can calculate the value of Kb if we know the value of Ka:
Kb = Kw / Ka = 1.0 × 10^-14 / 8.0 × 10^-5 = 1.25 × 10^-10
So, the value of the equilibrium constant for the reaction between HA and B is 1.25 × 10^-10.
learn more about butyric acid here:
brainly.com/question/28217720
#SPJ4
Which of the following compounds has the highest boiling point?A. Propan – 1 – olB. n – butaneC. ChloroethaneD. Propanal
The compound has the highest boiling point is the correct option is A. Propan - 1 - ol because of the hydrogen bonding.
The boiling point of the compound depends upon the pressure and the intermolecular forces. If there is strong intermolecular forces between the molecules, the boiling point increases. The hydrogen bonding is present present in the compound Propan - 1 - ol.
The hydrogen bond is the stronger intermolecular force. The branching increases, the boiling point decreases. Propan-1-ol has the highest boiling point due to the H-bonding in their structure. Therefore the correct option is that the Propan-1-ol has the highest boiling point.
To learn more about boiling point here
https://brainly.com/question/15319322
#SPJ4
The observation that different neurons function as dot, edge, and movement detectors suggests that
Select one:
a. different neurons have different receptive fields.
b. lateral inhibition is essential in visual processing.
c. neurons have similar preferences.
d. rods and cones are more complex than initially understood
The observation that different neurons function as dot, edge, and movement detectors suggests that different neurons have different receptive fields.
This means that each neuron is sensitive to different types of input, and is specialized to respond to certain types of stimuli. This allows the visual system to process complex visual information, such as the direction of movement or the boundaries of objects. Lateral inhibition is also essential in visual processing, as it helps to sharpen edges and enhance contrast. Neurons also have similar preferences in terms of the types of input they respond to, though they may respond differently depending on the context. Finally, rods and cones are more complex than initially understood, and can respond to a wide range of stimuli, including light and color.
To know more about stimuli please refer:
https://brainly.com/question/29737235
#SPJ4
If the density of silver is 10.5 g/mL, what is the mass of 1.00 cubic ft?
If the density of the silver is 10.5 g/mL, then its mass of the 1 ft³ is the 297000 g.
The density of the silver = 10.5 g/mL
1 ft = 30.5 cm
The 1 ft³ is as :
1 ft³ ( 30.5 cm / ft )³ = 28300 cm³
The density expression is as follows :
Density = mass / volume
Mass = density × volume
Mass of the silver , Ag = 28300 cm³ × 10.5 g / 1 cm³
The mass of the silver = 297000 g of Ag
Thus, the mass of the silver is the 297000 g of the Ag.
To learn more about density here
https://brainly.com/question/30481474
#SPJ4
the molecular formula for acetylene is c2h2. the molecular formula for benzene is c6h6. the empirical formula for both is
Answer:
CH
Explanation:
The empirical formula is the ratio of the elements to each other in a compound. CH means there is one hydrogen for every 1 carbon. C2H4 means there are 2 hydrogens for every 1 carbon.
Acetylene has one hydrogen for every one carbon: C1H1
Benzene also has one hydrogen for every one carbon; C1H1
a white precipitate is visible for the following equilibrium. select the answer that best explains the observation. al(oh)3 (s) ↔ al3 (aq) 3 oh- (aq)
The white precipitate observed in the equilibrium is likely aluminum hydroxide, Al(OH)3. This is because the precipitate forms as a result of the shift in the equilibrium towards the solid phase. When the concentration of Al3+ ions in the solution increases, the equilibrium will shift towards the formation of solid Al(OH)3, resulting in the precipitation of white aluminum hydroxide.
This observation can be explained by Le Chatelier's principle, which states that a system at equilibrium will respond in such a way as to counteract any change that is imposed on it. In this case, the increase in Al3+ ions in the solution will disrupt the balance of the equilibrium, causing the reaction to shift in such a way as to reduce the concentration of Al3+ ions, leading to the formation of the solid precipitate, Al(OH)3.
Find out more about solid precipitate, Al(OH)3.
brainly.com/question/28183039
#SPJ4
if you were to store your yearly co2 c o 2 emissions in a cube at stp, how long would each edge of the cube be?
The edge of each cube would be 27 feet long.
A cube that is 27 feet long, broad, and high. However, if you have trouble visualising it, image a cube that is almost as tall, wide, and long as a telephone pole. That much room would be required to hold a metric tonne of CO2. 1 (Since scientists measure CO2 in metric tonnes, we will use that unit of measurement here. A metric tonne weighs 2,204.6 lbs, which is roughly equivalent to the American and British tonnes (which weigh 2,240 lbs and 2,000 lbs, respectively).
Also keep in mind that this is truly a tonne. Although a gas can may not appear to weigh that much, this 27' x 27' x 27' cube weighs the same as a great white shark or, um, 400 bricks!
Over 16 of these gigantic cubes' worth of CO2 can be produced annually by the ordinary American.
2 Over three and a half Olympic-sized swimming pools can be filled with this many cubes. A large portion of that CO2 can be absorbed by the Earth again by means of trees, oceans, and other natural processes. However, a significant portion of it will linger in the atmosphere for perhaps hundreds of years.
To know about carbon dioxide
https://brainly.com/question/3049557
#SPJ4
how many milliliters of an aqueous solution of 0.186 m copper(ii) bromide is needed to obtain 7.79 grams of the salt ?
0.19 L of an aqueous solution of 0.186 m copper(ii) bromide is needed to obtain 7.79 grams of the salt.
Copper Bromide is represented as CuBr₂,
Molar mass of CuBr₂, 64+160= 224g/mol
Convert 0.186 mol of CuBr₂ into grams.
224 g/mol x 0.186 mol = 41.6 grams
Therefore, in 1 L solution 41.6 g of salt is dissolved, but we need to get 7.79 g of salt.
Therefore, 7.79 g of salt will be in the aqueous solution of volume =
( 7.79 / 41.6 = 0.19 L)
Hence, 0.19 L of an aqueous solution of 0.186 m copper(ii) bromide is needed to obtain 7.79 grams of the salt.
Learn more about amount of salt dissolved from the link given below.
https://brainly.com/question/28021335
#SPJ4
Why do network solids typically have higher melting temperatures than molecular solids? A. Network solids have covalent bonds between all atoms of the crystal. B. Network and molecular solids typically have the same melting temperatures. C. All covalent substances have strong attractive forces between them. D. All covalent substances do not have strong attractive forces between them.
Option C is correct. Network solids typically have higher melting temperatures than molecular solids because all covalent substances having strong attractive forces between them.
Covalent network solids are composed of atoms which is covalently bonded together into a three-dimensional network or layers of two-dimensional networks. Due to the strength of covalent bonds, covalent network solids having high melting points.
A molecular solid is a solid which is composed of molecules held together by the van der Waals forces. Because these dipole forces are weaker than to the covalent or ionic bonds, molecular solids are very soft and having relatively low melting temperature.
Molecular solids are of three types: Non-polar molecular solids, Polar molecular solids and Hydrogen-bonded molecular solids. Examples are HCl, F, O, N.
To know more about network solids here
https://brainly.com/question/15241125
#SPJ4
What is the ph of a solution that has [h3o ] = 3.98 x10-3 m? A) 1.70 x 10-12 B) 2.40 C) 4.60 D) 5.12 OE) 11.7
The pH of a solution that has [H₃O⁺ ] = 3.98 × 10⁻³ M is the correct option is B) 2.40.
The concentration of the [H₃O⁺ ] = 3.98 × 10⁻³ M
The pH expression is as follows :
pH = - log [H₃O⁺ ]
pH = - log ( 3.98 × 10⁻³)
pH = -( log ( 3.98 ) + log ( 10⁻³)
pH = - ( 0.599 - 3)
pH = - 0.599 + 3
pH = 2.40
Thus, the value of the pH is 2.40 for the hydronium ion with the concentration of 3.98 × 10⁻³ .
To learn more about pH here
https://brainly.com/question/12363913
#SPJ4
during osmosis, water moves down its own concentration gradient. how is it possible to reduce the concentration of a solvent?
the way to reduce the concentration of the solvent is to lower the level of concentration in the solvent. The duller the color of the solution, the lower the concentration of the solvent.
In the term of science, Osmosis generally can be defined as the selective movement of water molecules through a semipermeable membrane from a more dilute area to a more concentrated area can be done in the following way, such as :
1. Take a number of solutions to be diluted.
2. Add water or diluent until the volume matches the final volume of the solution.
3. Stir or shake and be careful not to spill.
4. The concentration of the solution will decrease.
Here you can learn more about osmosis https://brainly.com/question/24581508
#SPJ4
give a systematic name for the following formula: k[pt(nh3)cl5]
The systematic name for the formula "K[Pt(NH3)Cl5]" is Potassium Pentachloridoplatinate (IV).
This compound is a salt that is formed by the combination of potassium ions (K+) and pentachloridoplatinate (IV) anions [PtCl5]2-. The Pt(IV) center in the anion is coordinated to five chloride ions (Cl-) and one ammonia molecule (NH3). The formula can be read as potassium salt of pentachloridoplatinate, where the platinum is coordinated to chloride ions and ammonia molecules. The ion has a central platinum atom that is coordinated to five nitrogen atoms from the pentamminechloro ligands, and the chloride ion is bonded to the platinum atom. Complex ions are common in chemical reactions, and the presence of the complex ion in a solution can affect the reactivity and properties of the solution. The systematic name is used to unambiguously describe the chemical species in question.
Learn more about potassium here: brainly.com/question/13321031
#SPJ4
we use the henderson-hasselbalch equation to determine how much strong base to add to a certain quantity of weak acid to make up a buffer at a given ph. why do we use the henderson-hasselbalch equation? why do we not just subtract or add molar amounts of acid and base
Research is being carried out on cellulose as a source of chemicals for the production of fibers, coatings, and plastics. Cellulose consists of long chains of glucose molecules (C6H12O6), so for the purposes of modeling the reaction we can consider the conversion of glucose to formaldehyde (H2CO). Calculate the heat of reaction for the conversion of 1 mole of glucose into formaldehyde, given the following thermochemical data: H2CO(g) + O2(g) rightarrow CO2(g) + H2O(g) Delta H degree comb = - 572. 9 KJ/mol 6 C(s) + 6 H2(g) + 3 O2(g) rightarrow C6H12O6(s) DeltaHdegree f = - 1274. 4 KJ/mol C(s) + O2(g) rightarrow CO2(g) DeltaHdegree f = - 393. 5 KJ/mol H2(g) + 1 / 2 O2(g) rightarrow H2O(g) DeltaHdegree f = - 285. 8 KJ/mol C6H12O6(s) rightarrow 6 H2CO(g) DeltaHdegree rxn = ?
The heat of reaction for the conversion of 1 mole of glucose into formaldehyde is 637.6.
The heat of reaction is the difference in the heats of products and reactants
The amount of heat absorbed or evolved during the formation of one mole of a compound from its the component elements when each substance is in its normal physical state is known as the heat of formation, also known as the standard heat of formation, the enthalpy of formation, or standard enthalpy of formation (gas, liquid, or solid).
Heat of formation of [tex]\triangle H_{H_{2}CO }[/tex] is
-572.9=[tex]\triangle H_{CO_{2} } +\triangle H_{H_{2}O }-\triangle H_{H_{2}CO }[/tex]
-572.9=-393.5-285.5-[tex]\triangle H_{H_{2}CO }[/tex]
[tex]\triangle H_{H_{2}CO }[/tex]=-106.1
hence the heat of conversion is -106.1×6-(-1274.4)=637.6
Learn more about heat of reaction
brainly.com/question/16648056
#SPJ4
Suppoe that untable iotope A ha a half life of 40 day and decay into the table iotope B. If 120,000 atom of iotope A were prepared, how many atom of iotope B will be preent once 120 day have paed?
The amount of atoms of isotope B will be 15,000 atoms.
How to calculate atoms in an isotope?The number of atoms of isotope B can be calculated by using the equation:
Nt = N0 x (1/2)^(t/T), where Nt is the number of atoms of isotope B after time t, N0 is the initial number of atoms of isotope A, t is the time elapsed, and T is the half-life of the isotope A.
Plugging in the values, we have:
Nt = 120,000 x (1/2)^(120/40)
Nt = 120,000 x (1/2)³
Nt = 120,000 x (1/8) = 15,000
So, after 120 days, there will be 15,000 atoms of isotope B present.
Learn more on atoms here: https://brainly.com/question/6258301
#SPJ1
what is the relationship between the following structures?
The given structures indicate conformational structures. A variety of conformers are produced when the carbon-carbon single bond of a molecule is rotated.
Isomers are identical molecules that have different atomic configurations or different bonding patterns. The isomers are categorized based on the various configurations, and we may determine the type of isomer by observing the differences between two molecules. Structural isomers are isomers that share the same chemical formula but differ in their atomic organization or bonding patterns. When two atoms (in this case, let's assume carbon atoms) are connected by a double bond and the bond rotation is constrained, geometric isomers can be comprehended. Rotation of single bonds is a very effective method for creating conformational structures. When two molecules are completely identical, having the same atomic arrangements and bonding patterns, they are referred to as identical isomers.
To learn more about isomers click here https://brainly.com/question/12796779
#SPJ4
complete question: what is the relationship between the following structures?
(A) Structural isomers
(B) Geometrical isomers
(C) Conformational structures
(D) Identical structures
what is the total number of molecules of so2 in a 0.10 mole sample of so2?
The total number of molecules of SO₂ in 0.10 mole sample of SO₂ = 0.6022 x 10²³ molecules
To count the molecules that make up a substance, by dividing the number of moles by the Avogadro constant, one can get the total number of atoms or molecules in a sample.
According to his law, which states that "equivalent volumes of different gases measured under the same conditions of temperature and pressure contain the same number of molecules," one mole of material has 6.022 x 10²³ atoms.
Determine the substance's molecular weight for one mole in order to calculate the necessary number of molecules. Next, divide the molar mass value by the molecular mass, and multiply the result by the Avogadro constant.
The following formula is used:
Number of molecules = number of moles x Avogadro's number
= (0.10) x (6.022 x 10²³)
= 0.6022 x 10²³ molecules
Learn more about number of molecules here: https://brainly.com/question/29362049
#SPJ4
you have a liquid that is heat-sensitive and decomposes when overheated. how can this material be purified by distillation without using excessive heat
To purify a heat-sensitive liquid by distillation without overheating, the distillation process can be performed under reduced pressure, which reduces the boiling point of the liquid.
In this method, the distillation apparatus is operated at a pressure lower than atmospheric pressure, reducing the boiling point of the heat-sensitive liquid. This allows the liquid to be distilled at a lower temperature, reducing the risk of decomposition due to overheating.
The purified liquid can be collected in a cooled condenser, which further helps to prevent overheating and decomposition. This method of distillation under reduced pressure is a gentle and effective way to purify heat-sensitive liquids while minimizing the risk of thermal degradation.
To know more about distillation process click on the link below:
https://brainly.com/question/28824124#
#SPJ11
how many ppm of c29h60 are in 23 μm c29h60?
ppm (parts per million) is a unit of concentration that is used to quantify the quantity of a chemical in a combination; 23 m of C29H60 has 561,739.02 ppm of C29H60.
using the following formula: ppm is equal to (substance mass / total mixture mass) x 106.
Given that C29H60 chemical has a mass of 23 m, the following formula may be used to get the mixture's total mass:
Total mass of the combination is equal to 23 m/(mass of C29H60/molar mass of C29H60).
Assuming that C29H60 has a molar mass of 408 g/mol, the following formula may be used to get the total mass of the mixture:
Total mass of the combination is equal to 23 m / (408 g/mol) = 408 g.
We may get the ppm of C29H60 using the following formula:
561,739.02 ppm is equal to (23 m / 408 g) times 106 ppm.
As a result, 23 m C29H60 contains 561,739.02 ppm of C29H60.
learn more about chemical here:
https://brainly.com/question/29240183
#SPJ4