what is the correct line-angle structure for the condensed formula: (ch3ch2)2chch2ch(oh)ch(ch3)cho?

The reagents HCL and FeCl3 are required for the chlorination of benzene via electrophilic aromatic substitution.

What is the chlorination?

Chlorination is a chemical process in which one or more chlorine atoms are introduced into a molecule. In the context of benzene, chlorination refers to the reaction of benzene with HCl and FeCl3 to produce chlorobenzene via electrophilic aromatic substitution. In this reaction, the chlorine atom acts as an electrophile and reacts with the electron-rich aromatic ring of benzene, leading to the substitution of a chlorine atom for one of the hydrogen atoms in the ring.

Here you can learn more about chlorination

brainly.com/question/3308458

#SPJ4

As per the balanced reaction, one mole or 212.7 g of potassium phosphate gives 3 moles or 303.3 g of potassium nitrate. Then, 2.04 moles or 433 g of potassium phosphate is 619.1 g.

Potassium nitrate is an ionic compound formed by donating  electrons from the potassium metal to the nitrate group.

As per the given reaction, 1 mole of potassium phosphate gives 3 moles of potassium nitrate.

molar mass of potassium phosphate = 212. 2 g

molar mass of potassium nitrate = 101.1 g

mass of 3 moles of potassium nitrate = 303.3 g.

Mass of 2.4 moles of potassium phosphate = 2.4 ×212. 2 g = 433.3 g.

Then, the mass of potassium nitrate formed by 433.3 g of potassium phosphate is :

(433.3 g× 303.3 g)/212.7 g = 619.1 g

Therefore, the mass of potassium nitrate is 619.1 g.

Find more on potassium nitrate:

https://brainly.com/question/15080595

#SPJ1

Your question is incomplete. But your complete question is:

K3PO4 + Al(NO3)3 → 3KNO3 + AlPO4

a. What is the mass of potassium nitrate that is produced when 2.04 moles of potassium phosphate react?

Paramagnetic species are fluorine , calcium ,  iron(III) ion . Atomic sodium and zinc(II) are diamagnetic species.

Compounds that are paramagnetic always have one or more unpaired electrons that are drawn to the magnetic poles.

Because one of the remaining p orbitals of fluorine contains an unpaired electron, the element is paramagnetic in this case.

Sodium is diamagnetic, and Zn(II) is diamagnetic because it has all paired electrons. Calcium(II) is assumed to be paramagnetic because it excites one electron from its s-orbital to its exctied d-orbital. Iron(III) is paramagnetic because it needs unpaired electrons.

Substances with impaired electrons that are attracted by a magnetic field are called paramagnetic. In the absence of a magnetic field, they lose their magnetism. The substance's magnetic moment and, consequently, its paramagnetism increase with the number of unpaired electrons.

The majority of atoms with incompletely filled atomic orbitals are paramagnetic, with the exception of copper, due to the presence of unpaired electrons in the material. Unpaired electrons have a magnetic dipole moment and behave like tiny magnets because of their spin.

Learn more about paramagnetic:

brainly.com/question/13162002

#SPJ4

Option B. 4. The molecule (CH3)2CHCH2CH2CI has 4 magnetically non-equivalent protons. These protons are found on the methylene (-CH2-) and methine (-CH-) groups in the molecule.

The symmetry of the molecule and the coupling between the protons can lead to some protons being magnetically equivalent, meaning that they have the same chemical shift and coupling constants. However, there are 4 distinct sets of protons in this molecule that are magnetically non-equivalent. In the molecule (CH3)2CHCH2CH2CI, there are 4 sets of magnetically non-equivalent protons, each having a different chemical environment and hence a different magnetic environment. These protons can be found on the carbon atoms that are bonded to different number of hydrogens and other atoms.

To learn more about non-equivalent protons please click on below link.

https://brainly.com/question/28480636

#SPJ4

The dissociation of salicylic acid into two particles does not modify the amount of solute in either phase, the ratio of solute concentration in one phase to concentration in the other phase remains constant. As a result, the dissociation has no effect on the computed Kr value.

The partition coefficient, commonly known as the Kr value, is a measure of the distribution of a solute between two immiscible phases. It is determined by the ratio of the solute concentration in one phase to the concentration in the other.

It is crucial to note that the dissociation of a solute into many particles can influence the solute's solubility in a given solvent, but this has no effect on the Kr value because the Kr value is a measure of the solute's distribution between two phases, not its solubility in a specific solvent.

For more such questions Kr value.

https://brainly.com/question/30433642#

#SPJ11

The number of molecules of each species present at equilibrium can't be determined by trial and error.

The law of mass action and the equilibrium constant (K) determine the ratio of the concentrations of reactants and products at equilibrium, b. To find the number of molecules, you would need to know the initial concentrations of H_2O and CO and use an equilibrium expression to calculate the concentrations at equilibrium. Write down the balanced chemical equation for the reaction: H_2O(g) + CO (g) H_2(g) + CO_2(g)Define the initial concentrations of H_2O and CO. Write the equilibrium expression using the balanced chemical equation and the initial concentrations. Substitute the value of the equilibrium constant (K = 2.0) into the expression. Use the equation to solve for the equilibrium concentrations of H_2O, CO, H_2, and CO_2.Repeat the process for different initial concentrations of H_2O and CO to check if the results change. Verify that the sum of the concentration of reactants and products remains constant, as required by the law of mass conservation

learn more about equilibrium here :

https://brainly.com/question/11336012

#SPJ4

Answer:

About 203.381 grams

Explanation:

We need to first determine the molar mass of Ba3(PO4)2.

We have:

3 Bariums - 137.327*3 = 411.981

2 Potassiums - 39.098*2 = 78.198

8 Oxygens - 16*8 = 128

Add these together and we get 618.179 g/mol

If we only want 0.329 moles, then we multiply those two numbers together to get about 203.381 grams.

Answer:

157,500mg

Explanation:

Mass = density × volume

= 10.5 g/ml × 15 ml

= 157.5 g

Since the answer is asked in mg we will have to convert 157.5 g to mg:

157.5 × 1000 = 157, 500mg

The mass of silver with a volume of 15 ml can be calculated as follows:

mass = density × volume mass = 10.5 g/ml ×15 ml mass = 157.5 g

Since 1 g = 1000 mg, then 157.5 g = 157.5 × 1000 mg = 157,500 mg.

So, the mass of silver with a volume of 15 ml is 157,500 mg.

Silver is a dense metal with a high melting and boiling point, which is something to keep in mind. It is an important material in numerous industries, including electronics, jewellery, and coinage due to its excellent electrical and thermal conductivity. Because of its antibacterial qualities and because of its particular shine and malleability, it is also widely employed in the arts and in the medical area. Although silver's density is largely constant, conditions like temperature and purity can have an impact. The ability to calculate a substance's volume and mass using its density is another useful attribute that is significant in disciplines like materials science and engineering.

To know more about boiling point click here:

brainly.com/question/2153588

#SPJ4

Considering  the following elementary gas-phase reversible reaction to be carried out isothermally with no pressure drop,

              1)  0% = 0

             2)  50%= 0.5

             3)   0.99Xe= 99%

When a chemical reaction is reversible, the reactants and products both react to create the final product at the same time.

Such a reaction involves constant forward and backward reactions between the reactants and products.

Simply said, when molecules collide, reactant bonds are disrupted, and the energy released from this broken connection is used to create new product molecules.

Learn more about Reversible reaction:

https://brainly.com/question/15232584

#SPJ4

Given that aluminum has a specific heat of 0.903, the combined temperature of the metal and water is 34.61 °C.

Calculate the pressure to temperature ratio using the formula k = p1/T1. The comparable pressure in a similar container can be determined by multiplying any temperature value by k: p2 = k T2. By multiplying each amount of pressure by k, you can determine the temperature.

Using the formula T(final) = (m1 T1 + m2 T2) / (m1 + m2), determine the final temperatures of the water mixture. T1 denotes the temperature of the first container of water, T2, and m1 and m2 denote the weights of the initial second containers of water, respectively.

To know more about final temperature  visit:

https://brainly.com/question/11050215

#SPJ4

The following molecule is neither E or Z configuration , it is the trans configuration.

The cis and trans approach will works  if there is two identical groups that are connected to the double bond.  The E, Z configuration works for the different substituent. the higher priority group on the each carbon is on the same or the opposite side of double bond. It is depends on the priority of the group.

The same group priority are on the same side of carbon double then it will be the Z configuration. If the same priority groups are on the opposite side than the configuration will be E configuration.

To learn more about configuration here

https://brainly.com/question/14687635

#SPJ4

Density of liquid is calculated to be equal to 1466 kg/m^3.

Density is the mass per unit of volume of substance and the symbol for density is ρ .

Mass of liquid = 111.50 g - 74.85 g = 36.65 g

Convert the volume of the liquid from milliliters to cubic meters. We can do this by using the conversion factor of 1 mL = 10^-6 m^3:

volume of liquid = 25.0 mL x 10^-6 m^3/mL = 2.50 x 10^-5 m^3

Density of liquid = mass of liquid / volume of liquid = 36.65 g / (2.50 x 10^-5 m^3)

= 1466 kg/m^3

To know more about density, refer

https://brainly.com/question/26364788

#SPJ4

The pH of acid is between 0-7 on pH scale while for base pH range is from 7-14.  pH is a unitless quantity. Therefore,  the pH of the solution is  2.7.

What is pH?

pH is a measurement of amount of hydronium ion H₃O⁺ in a given sample. More the value of hydronium ion concentration, more will be the solution acidic.

On subtracting pH from 14, we get pOH which measures the concentration of hydroxide ion in a given solution. pH depend on the temperature. At room temperature pH scale is between 0 to 14. pH of neutral solution is 7.

Number of moles =  .650M ×75.0 mL  = 3.5 × 10⁻³ moles

Molarity of the methylamine = 3.5 × 10⁻³ moles/75.0 mL = 0.012 M

               AH(aq) +H₂O ⇔H₃O⁺ (aq) + A⁻(aq)

I                 0.012                       0                 0

C               - x                             +x               +x

E               0.012 -x                     x                 x

Kb= Antilog (-3.5) =5.0 x 10⁻⁴

Kb = [H₃O⁺] [A⁻]/[AH]

3.2 × 10⁻⁴ = x²/0.012 -x

3.2 × 10⁻⁴ (0.012 -x ) =  x²

3.84 ×10⁻⁶ - 3.2 × 10⁻⁴x =   x²

Solving the resulting quadratic equation

x=0.0018 M

pH=-log(0.0018 M) = 2.7

Therefore,  the pH of the solution is 2.7.

To learn more about pH, here:

brainly.com/question/27945512

#SPJ1

In light of this, the elements influencing solubility depend on the solute's state water is considered as a pure substance because, with a few exceptions, it can dissolve essentially all soluble compounds. The mobility of a chemical can be influenced by a number of circumstances. The creation of a new bond between the molecules of the solute and the solvent is termed as solubility.

A substance's chemical and physical properties determine how soluble it is. A few other factors and situations can also impact it. A few of them are: temperature, pressure, type of binding, and forces here between components.

On the other hand, if this thermal decomposition turns out to be exothermic, solubility drops. If a solution must be used to breakdown hydrocarbons as little more than a solute.

To know more about  solubility  click here

brainly.com/question/29589228

#SPJ4

As the number of bonds between two carbon atoms increases, the bond length decreases.

As the number of bonds between two carbon atoms increases, then the bond length decreases.

The bond energy also increases with the number of bonds between the carbon atoms. The number of electrons between the carbon atoms does not change with the number of bonds, but rather depends on the valence electrons of the carbon atoms themselves.

C-C bond has longest covalent bond distance. Among, C, N, O and H,  covalent radius of C is maximum. Non polar bond length is higher than the polar bond length.

To know more about bond length, refer

https://brainly.com/question/16012396

#SPJ4

The beginning of a boiling point is the temperature at which a substance boils under standard conditions of 1 atm pressure and the end of a range of a boiling point is the temperature above which a substance can no longer be liquefied.

The range of a boiling point refers to the difference between the lowest and highest boiling point of a substance. The boiling point of a substance is defined as the temperature at which its vapour pressure is equal to atmospheric pressure and it changes from a liquid to a gas. The normal boiling point is usually used as a reference point to compare the boiling points of different substances.

On the other hand, the end of a boiling point range is defined as the “critical temperature” which is the temperature above which a substance can no longer be liquefied no matter how much pressure is applied. At this temperature, the vapour pressure of the substance is equal to its critical pressure, and it becomes a supercritical fluid.

It's essential to understand that the boiling point range is not a fixed value and can vary based on the pressure and temperature of the surrounding environment. In addition, some substances have a wide boiling point range, while others have a narrow range.

To learn more about boiling point here:

https://brainly.com/question/40140#

#SPJ11

E notation, also known as scientific notation, is a way of representing very large or very small numbers using exponential notation. In e notation, a number is represented as a coefficient multiplied by 10 raised to an exponent.

Here's how you can use e notation in Learning Catalytics:

Input the number in scientific notation using the letter "e" to represent "10^". For example, if you want to represent 1.23 x 10^4, you would input 1.23e4.

Use the e notation when answering questions that require it, such as numerical response questions or equation response questions.

If a question requires you to convert a number from standard form to e notation, you can use the following steps:

Count the number of places you need to move the decimal point to the right to get a coefficient between 1 and 10.

Write the coefficient followed by the letter "e" and the number of places you moved the decimal point, with a positive sign if you moved it to the right and a negative sign if you moved it to the left.

For example, if you need to convert the number 123,000 to e notation, you would move the decimal point 6 places to the left, getting 1.23. The e notation for 123,000 would then be 1.23e6.

Learn more about scientific notation here:

https://brainly.com/question/18073768

#SPJ4

when a narrow diameter glass tube is inserted into a body of water, water rises in the tube and its surface inside is concave upwards. which statement, concerning the strength of the intermolecular forces between glass and water molecules compared to those between water molecules, is accurate

Option c is correct answer,

c) The forces of attraction between the glass and water are stronger than those in water.

Adhesion, which is connected to water's comparatively high surface tension, generates a force. Because the attraction between the glass and the water is often greater than that of the water itself, the concave force develops. You typically see a concave force, which is created when the molecules of the liquid are attracted to the molecules of the container.

To know more about concave force click here:

brainly.com/question/24666570

#SPJ4

The type of the intermolecular forces act between a water molecule and a hydrogen fluoride molecule is the dipole dipole interaction.

The Dipole-Dipole interactions is the type of the intermolecular force of the attraction that occurs  when the two dipolar molecules will interact with the each other through the space. The hydrogen fluoride, that is H-F and the water molecule that is H₂O both are the polar compound.

The Dipole-dipole forces are the attractive forces that arises between the positive end of the one polar molecule and the negative end of the  other polar molecule.

Thus, the dipole dipole interaction is present between a water molecule and the hydrogen fluoride molecule.

To learn more about intermolecular force  here

https://brainly.com/question/30461751

#SPJ4

H2 has a molecular mass of 2 and a molecular weight of 1 u and 2u. When hydrogens join forces to form a hydrogen molecule, the result is a gas known as H2.

Find a Single Atom's Atomic Mass The alpha particle of a single particle can be determined by summing the total masses of the protons and neutrons in that particular isotope since their combined masses make up nearly each of the mass of a given atom.

The numbers of neutrons and protons in an atom are simply added to determine the atom of that particular atom. For instance,Think about an oxygen atom, which has 8 protons, 8 neutrons, and 8 electrons. You only need to multiply the atomic weight of oxygen by 8 electrons and 8 neutrons.

To know more about molecular visit :

https://brainly.com/question/14614762

#SPJ4

Covalent bonds are one of the most important types of chemical bonds formed by the overlapping of an element's atomic orbitals. Because of this overlapping, a very strong bond is formed, and covalent bonds are the strongest known bonds.

A molecule can contain both sigma bonds and pi bonds.

A single bond in a covalent bond is always a sigma bond.

A double bond consists of a sigma bond and a pi bond, whereas a triple bond consists of two pi bonds.

When we look at the molecule, we can see that it has 14 single bonds, 1 double bond, and 1 triple bond.

As a result, the molecule has 16 sigma bonds.

(14+1+1)

The total number of pi bonds 3(1+2).

Learn more about sigma bonds here

https://brainly.com/question/30199016

#SPJ4

Sodium azide is a weak acid and it is formed by the reaction between weak acid (HN₃) and a strong base (NaOH). The solution contains Na⁺, N³⁻, H₂O are present in the solution. Molarity measures the amount of a solute.

Molarity measures the amount of a solute (substance being dissolved) in a given volume of a solvent (the dissolving medium).

Given information,

The concentration of NaN₃ = 0.016M

Ka value of hydrazoic acid (HN₃) = 1.9 × 10⁻⁵

The reaction is given as:

N³⁻(aq) + H₂O(l) → HN₃(aq) + OH⁻(aq)

[tex]\rm Kb = \frac{[HN_3] [OH_{6}^{-}]}{[N^{3-}]}\\\rm Kb = \frac{10^{-14}}{1.9\times10^{-5}} \\= 5.3\times10^{-10}\\\\\\[/tex]

Solving further,

[tex]\rm x^{2} + 5.3\times10^{-10}x - 8.48\times10^{-12} = 0\\\rm x = 2.91\times10^{-12}\\\rm x = \rm [OH^{-}] = [HN_{3}] = 2.91\times10^{-12}M\\[N^{3-}] = [Na^{+}] = 0.016M[/tex]

Therefore, the concentration of OH⁻ and  HN₃ is 2.91x10⁻¹² M and the concentration of N³⁻ and Na⁺ is  0.016M.

Learn more about molarity, here:

https://brainly.com/question/2817451

#SPJ6

Your question is incomplete, most probably the full question is this:

Sodium azide (NaN3) is sometimes added to water to kill bacteria. Calculate the concentration for all species in a 0.016M solution of NaN3 the Ka value for hydrazoic acid ( HN3) is 1.9×10^-5.

These are some examples of traditional forensic analysis techniques:Hair and fiber analysis, spectroscopy, serology, and chromatography.

To learn more about evidence analysis refer

https://brainly.com/question/27871837

#SPJ1

As 0.120 M HCl is gradually added to a 24.0 mL sample of 0.120 M NaOH, the Methyl Red indicator will change colour in the pH range between 5.0 and 7.0. The indicator will transition from its yellow basic form to its red acid form as the pH decreases from its starting value of 13.0 to 7.0.

The pKa value and the associated colours of the indicator in its acidic and basic versions can be used to establish the pH range for Methyl Red indicator's colour shift. Methyl Red's pKa value is 5.0, which indicates that the indicator exists in equal levels in both its yellow basic and red acid forms at a pH of 5.0. The indicator will predominantly exist in its red acid form as the pH falls below 5.0 and in its yellow basic form as the pH rises over 5.0.Adding 0.120 M HCl to a sample of 24.0 mL of 0.120 M NaOH will cause a neutralising reaction that will result in a solution.

Learn more about Methyl Red here:

https://brainly.com/question/29294532

#SPJ4

Answer:

The factor that determines whether or not two atoms will bond to form a molecule is their number of valence electrons.

Explanation:

Two atoms will bond if they have a difference in electrical charge. Atoms with an unequal number of protons and electrons have an electric charge, and when they come together they will form a chemical bond.

Electrical charge is an important physical property of matter that exists in two forms, positive and negative. Positively charged particles, such as protons, are attracted to negatively charged particles, such as electrons. In the most basic sense, electrical charge is simply a measure of the quantity of protons and electrons in a given object. In other words, it is a measure of the object's ‘electrical balance’. All matter is made up of atoms, and atoms are made up of positively charged protons and neutral neutrons, as well as negatively charged electrons. The number of protons and electrons in an atom is always equal, meaning that the atom (and therefore the object it is part of) has no net charge.

To learn more about electrical charge

https://brainly.com/question/874116

#SPJ4

Percent yield of silver hydroxide based on group a's results = 98.2%

Percent yield is calculated by dividing the actual yield of a reaction by the theoretical yield and multiplying the result by 100. The theoretical yield is the expected amount of product that should be obtained based on the stoichiometry of the reaction.

In group a, the theoretical yield of silver hydroxide is 5.10 g and the actual yield is 5.01 g. The percent yield can be calculated as follows:

Percent yield = (Actual yield / Theoretical yield) x 100 = (5.01 / 5.10) x 100 = 98.2%

Hence, the percent yield of silver hydroxide based on group a's results is 98.2%.

Learn more about percent yield here:

https://brainly.com/question/11963853

#SPJ4

The maximum amount of water is only 38 g H2O because C2H6 is the limiting reactant and the amount of water in C2H6 is lower (2 significant digits)

According to the reaction equation; 2CO2(g) + 3H2O = C2H6(g) + 7/2O2(g) (g). Next, we change the provided reactant masses to reactant moles. The number of moles = mass/molar mass = 7.82g/30gmol-1 = 0.261 moles for ethane. The number of moles = 9.9 g/32 gmol-1 = 0.31 moles for oxygen The limiting reactant, which produces the least quantity of product, is what we identify next. As for ethane; 0.261 moles of Ethane produce 0.261 3 = 0.783 moles of water, according to the reaction equation. for oxygen. 3 moles of water are produced by 3.5 moles of oxygen. 0.31/3/3.5 = 0.266 moles of water are produced from 0.31 moles of oxygen. So, the limiting reactant is oxygen. Water produced as a mass equals 0.266 moles of water times 18 gmol-1, or 4.79 g of water. Ethane produces 3 moles of water from 1 mole.

Learn more about Reaction equation here:

https://brainly.com/question/17058972

#SPJ4

The number of mole of O₂ required for the reaction if 15.0 grams of N₂O4 is produced, is 0.326 mole

We'll begin by obtaining the number of mole in 15.0 g of N₂O₄. Details below:

Mole = mass / molar mass

Mole of N₂O₄ = 15 / 92

Mole of N₂O₄ = 0.163 mole

Next, we shall write the balanced equation for the reaction. This is givrn below:

N₂ + 2O₂ -> N₂O₄

From the balanced equation above,

1 mole of N₂O₄ was produced from 2 moles of O₂

Finally, we shall determine the number of mole O₂ required for the reaction. Details below:

From the balanced equation above,

1 mole of N₂O₄ was produced from 2 moles of O₂

Therefore,

0.163 moles of N₂O₄ will be produced from = 0.163 × 2 = 0.326 mole of O₂

Thus, number of mole of O₂ required is 0.326 mole

Learn more about number of mole:

https://brainly.com/question/23350512

#SPJ1

The movement of one or more electrons from one reactant to another is the key chemical event in an oxidation-reduction reaction, also called a(n) redox reaction.

What is a redox reaction?

A redox reaction (reduction-oxidation reaction) is a chemical reaction in which electrons are transferred from one molecule (the reductant) to another (the oxidant). This transfer leads to changes in the oxidation state of the molecules involved and results in the formation of two new species: a reduced species (acceptor of electrons) and an oxidized species (donor of electrons). This type of reaction is important in many natural processes, such as cellular respiration, corrosion, and photosynthesis.

To know more about corrosion, visit:

https://brainly.com/question/30057568

#SPJ4