Answer:
Old and inefficient mining smokestacks contaminate the soils around abandoned mine sites.
Explanation:
A smokestack, is a very tall channel commonly used in many instances to release gases produced by combustion processes directly into the air. These high towers are aimed at dispersing the gaseous pollutants over a wider area thereby minimizing their impact.
Old and inefficient smokestack do not contaminate the soil since they are very high towers that discharge gases directly into the atmosphere. Hence they are not part of the sources of soil contamination in abandoned mines.
Which is a feature of a single replacement reaction?
Answer:
A typical characteristic of a single-replacement reaction is that there is one element as a reactant and another element as a product. will not because bromine is below fluorine on the periodic table. This is just one of many ways the periodic table helps us understand chemistry.
Explanation:
hope it will help u......
the molar mass of oxygen(O2) is 32g. what is the mass of 1.05*10^25 molecules of O2
Answer:
3.36×10²⁶ g
Explanation:
Molar mass ( O2) = 32g/mol
mole(O2) = 1.05×10²⁵mol
Mass(O2) = ?
mole(n)= mass(m)/Molar mass(M)
n×M = m
1.05×10²⁵ mol × 32g/mol = mass
mass= 3.36×10²⁶ g
What is the name of the process manufacturers use to make unsaturated fatty acids more solid at room temperature and prevent oxidation.
Answer:
Hydrogenation
Explanation:
Look up the definition to confirm
Give structural formula of ethylene. What type of bond is found in between carbon and hydrogen? Why is the bond between carbon and carbon weak in it?
Answer:
See explanation
Explanation:
The structure of ethylene is shown in the image attached. The two carbon atoms have a double covalent bond between them.
The two carbon atoms are sp2 hybridized. The bond between them is a covalent bond, there is one pi bond and one sigma bond between the carbon atoms. Between carbon and hydrogen, there are covalent bonds also. The covalent bonds are sigma bonds.
The pi bonds between carbon atoms is weaker than the sigma bonds between the carbon atoms. This is because, the side-by-side overlap the p orbitals in a pi bond is less effective than the end-to-end overlap of a sigma bond.
In a few sentences, describe the molecular polarity and the intermolecular forces present in ammonium lauryl sulfate.
The description of the molecular polarity and the intermolecular forces present in ammonium lauryl sulfate should be explained below.
What is ammonium lauryl sulfate?The common name of it should be likely ammonium lauryl sulfate (ALS) and its molecular formula should be (CH3(CH2)10CH2OSO3NH4).
Also, one intermolecular formula that should be presented in the molecule should be considered as the electrostatic forces of attraction that lies between the non-polar chain and the polar ending group.
Learn more about forces here: https://brainly.com/question/23196146
Zinc oxide + carbon =
Answer:
carbondioxe and zinc as solid
Write a Lewis structure that obeys the octet rule for each molecule or ion. Include resonance structures if necessary and assign formal charges to each atom.
Answer:
A structure that obeys the octet rule for each molecule or ion is [tex]XeO_4[/tex]
Explanation:
Here in [tex]XeO_4[/tex] , Xenon has 8 valence electrons and each oxygen atom has 6 valence electrons
Lewis structure for [tex]XeO_4[/tex] is shown below :
Here , all atoms are having their complete octet .
All the atoms in this Lewis structure is having their complete octet .
Resonance structure is not required as all atoms are same that is oxygen .
Hi, in some texts number of water molecules released during polymerization is 2n but in others 2n-1 , why?
Answer:
Explanation:
Because you only have one repeat unit, n=1. 2n-1 becomes 2(1)-1 which is equal to one, meaning one molecule of H2O is produced, as is shown by the top condensation polymerisation reaction.
If you had two repeat units, n=2 so 2n-1=3. Three H2O molecules are produced because you would need two molecules of each reactant so three condesation reactions would occur and three molecules of H2O would be released.
A new drug has been released to the public and is popular among
consumers. It is effective in relieving high blood pressure. However, it has
altered some patients' personalities. Which stage of the engineering process
may address this negative side effect?
A. Screening
B. Testing
C. Looking for improvements
D. Evaluating test results
Answer:
c. Looking for improvements
Explanation:
I took the quiz and it was right
Answer: C
Explanation:
just took the test
What is the balance equation for
_ Ba + _ HNO3 —> _ H2 + _ Ba(NP3)2
_ H3PO4 + _ NaOH —> _ H2O + _ Na3PO4
1st one
2_2_2
2nd one
3_1_1_3
i looked it up
A solar energy company learns of several recent cyber-attacks targeting other companies in their industry and realizes they could be next. The company initiates an analysis to weigh the measures needed to counter the potential threat and minimizing the impact to their business in case those are exploited. Which security principle is illustrated in this example?
please help. need this asap!!
Answer:
E.....Na2I.,.
Explanation:
Cuz sodium has a Vallency..1......lodide has Vallency 2
What is the salt produced in the stomach when calcium carbonate reacts with and neutralizes excess hydrochloric acid?
The salt CaCl2 (calcium chloride) and water (H2O) are formed in this reaction. Also formed is the gas carbon dioxide (CO2) which may cause a bloated feeling in the stomach. The acid that is secreted in your stomach is approximately 0.1 M (moles per liter) hydrochloric acid.
I hope it helps ●~●
Help ASAP only right answers only no spam don’t answer if you don’t know
Answer: Solve problems
Stae the change in oxidation state of iron during the reactiong of iron extraction
Answer:
3
Explanation:
The reaction for the extraction of Iron is :-
2Fe2O3(s) + 3C(s) → 4Fe(l) + 3CO2(g)
O.S. of Fe in Fe2O3 is 3 and O.S. of Fe(l) is 0change in oxidation state (O.S.) = higher O.S - lower O.S
= 3 - 0
= 3
A gas is put into a cosed container.
The container and the gas inside it are heated.
What will happen to the pressure inside the container?
Answer:
When gases in containers are heated, their molecules increase in average speed. This means that they exert a greater force when they collide with the container walls, and also collide with the walls more frequently. The gas is therefore under greater pressure when its temperature is higher.
gases does not have definite shapes and volume ? (give a scientific reason for the following)
Answer:
Gases do not have a definite shape or volume because the molecules in gases are very loosely packed, they have large intermolecular spaces and hence they move around. ... The particles of solid are closely packed and occupy less space while particles of gases are loosely packed and occupy the complete space available.
Explanation:
Please Mark me brainliest
Help me guys ☹️please
Answer:
Coriolis Effect
Explanation:
The Coriolis Effect is caused by Earths rotation. We can not only see this affecting how winds move, but also where storms form and the movement of oceans currents.
A 115.0-g sample of oxygen was produced by heating 400.0 g of potassium chlorate. 2KClO3 Right arrow. 2KCI 3O2 What is the percent yield of oxygen in this chemical reaction
Answer:
Percentage yield of O₂ = 73.4%
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
2KClO₃ —> 2KCl + 3O₂
Next, we shall determine the mass of KClO₃ that decomposed and the mass of O₂ produced from the balanced equation. This can be obtained as follow:
Molar mass of KClO₃ = 39 + 35.5 + (3×16)
= 39 + 35.5 + 48
= 122.5 g/mol
Mass of KClO₃ from the balanced equation = 2 × 122.5 = 245 g
Molar mass of O₂ = 2 × 16 = 32 g/mol
Mass of O₂ from the balanced equation = 3 × 32 = 96 g
SUMMARY:
From the balanced equation above,
245 g of KClO₃ decomposed to produce 96 g of O₂.
Next, we shall determine the theoretical yield of O₂. This can be obtained as follow:
From the balanced equation above,
245 g of KClO₃ decomposed to produce 96 g of O₂.
Therefore, 400 g 245 g of KClO₃ will decompose to produce
= (400 × 96)/245 = 156.7 g of O₂.
Thus, the theoretical yield of O₂ is 156.7 g
Finally, we shall determine the percentage yield of O₂. This can be obtained as follow:
Actual yield of O₂ = 115.0 g
Theoretical yield of O₂ = 156.7 g
Percentage yield of O₂ =?
Percentage yield = Actual yield /Theoretical × 100
Percentage yield = 115/156.7 × 100
Percentage yield = 11500/156.7
Percentage yield of O₂ = 73.4%
Si se analizan muestras de Al2O3 en diversos laboratorios se encuentra que todas tienen 52,94% de aluminio (Al) y 47,06% de oxígeno (O). Este dato experimental corresponde a lo expresado por la ley de:
A) La ley de las proporciones definidas
B) La ley de las proporciones múltiples
C) La ley de la conservación de la masa
D) La ley de la conservación de la energía
convert 256 ml to kl
Answer:
0.000256
Explanation:
Formula:
Divide the value volume by 1e+6
1 kl equal to 1000000ml
Amino acids that must be obtained through the diet are called O A) cholesterol. OB) non-essential amino acids. o C) essential amino acids. The OD) peptides.
Answer:
I belive C: essential amino acids
Explanation:
They can t be made from the body so they must be obtained my food
Which of these will form hydrogen bonds? a. CH2Br2 b. CH3OCH2CH3 c. H2NCH2COOH d. H2SO3 e. CH3CH2OH
Answer:
Which of these will form hydrogen bonds?
a. CH2Br2
b. CH3OCH2CH3
c. H2NCH2COOH
d. H2SO3
e. CH3CH2OH
Explanation:
A hydrogen bond is the weak electrostatic force of attraction that exists between a covalently bonded hydrogen atom and a highly electronegative atom like N,O, and F.
For example, water has a hydrogen bond between the hydrogen atoms of one molecule and the oxygen atom of another molecule.
Among the given molecules,
a. CH2Br2 does not have a hydrogen bond because it does not have N or O or F.
b. CH3OCH2CH3 does not have a hydrogen bond.
Due to the absence of -OH or -NH or H-F bonds.
c. H2NCH2COOH shows hydrogen bonding.
d. H2SO3 has hydrogen bonding.
Due to the presence of -OH bond.
e. CH3CH2OH has hydrogen bonding.
Due to the presence of -OH bond.
Calculate the number of phosphorus atoms in 6.2g of phosphorus
Answer:
9.33 e22
Explanation:
For moles
N=m/M
N=6.2/40
N=0.155
For total no. Of atoms:
Atoms= N × 6.02e23
Atoms= 0.155× 6.02e23
Atoms= 9.33e22
Which of the following statements regarding diffusion is false? Group of answer choices Diffusion is a result of the thermal energy of atoms and molecules. Diffusion occurs even after equilibrium is reached and no net change is apparent. Diffusion requires no input of energy into the system. Diffusion occurs when particles spread from areas where they are less concentrated to areas where they are more concentrated.
Answer: The statement diffusion occurs when particles spread from areas where they are less concentrated to areas where they are more concentrated, is false.
Explanation:
When particles or atoms of a substance are able to move rapidly from one place to another then it is called diffusion.
During diffusion, particles tend to move apart from each other.
For example, spreading of dye molecules into water.
Thus, we can conclude that the statement diffusion occurs when particles spread from areas where they are less concentrated to areas where they are more concentrated, is false.
cual es el tamaño de partícula del alcohol
Answer:
Las botellas de alcohol vienen en una variedad de tamaños. El estándar es de 750 ml, que también se conoce como "un quinto" porque es 1/5 de galón. Otros tamaños comunes de botellas de alcohol son 50ml, 100ml, 200ml, 375ml, 1L y 1.75L.
Explanation:
what is the atomic number of an atom that has 20 protons and 20 neutrons
Answer:
20
Explanation:
Hi there!
We need to find the atomic number of an atom that has 20 protons and 20 neutrons
the atomic number of an atom is equivalent to the amount of protons an atom has, as the number of protons determines what element an atom is.
Since the atom has 20 protons, the atomic number of the said atom is 20
Hope this helps!
Los 4 números cuánticos del oxígeno
What are two factors that determine the concentration of hydronium (or hydroxide) ions in an acid (or base) solution?
Answer:
hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water (Kw). The concentrations of these ions in a solution are often critical determinants of the solution’s properties and the chemical behaviors of its other solutes, and specific vocabulary has been developed to describe these concentrations in relative terms. A solution is neutral if it contains equal concentrations of hydronium and hydroxide ions; acidic if it contains a greater concentration of hydronium ions than hydroxide ions; and basic if it contains a lesser concentration of hydronium ions than hydroxide ions.
Answer:
hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water
Explanation:
Not my work! I hope this helps!
Using the balanced equation below, how many grams of cesium fluoride would be required to make 73.1 g of cesium xenon heptafluoride?
CSF + XeF6 → CsXeF7
Answer: A mass of 84.46 g of cesium fluoride would be required to make 73.1 g of cesium xenon heptafluoride.
Explanation:
Given: Mass of cesium xenon heptafluoride = 73.1 g
The molar mass of cesium xenon heptafluoride is 131.3 g/mol. So, moles of [tex]CsXeF_{7}[/tex] is calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{73.1 g}{131.3 g/mol}\\= 0.556 mol[/tex]
According to the given equation, 1 mole of CsF yields 1 mole of [tex]CsXeF_{7}[/tex].
Hence, moles of CsF reacting will also be equal to 0.556 mol. As molar mass of CsF is 151.9 g/mol so its mass is calculated as follows.
[tex]Moles = \frac{mass}{molarmass}\\0.556 mol = \frac{mass}{151.9 g/mol}\\mass = 84.46 g[/tex]
Thus, we can conclude that a mass of 84.46 g of cesium fluoride would be required to make 73.1 g of cesium xenon heptafluoride.