Answer:
1. 36.35 g = 36.35E15 micrometer.
II. 36.35 g = 363.5 millimetre.
III. 36.35 g = 0.03635 kilogram.
Explanation:
Given the following data;
Mass of calorimeter = 36.35 gramsTo convert the mass in grams (g) to;
I. Micrometer
Conversion:
1 g = 1 exp 15 um
36.35 g = X um
Cross-multiplying, we have;
X = 36.35 * 1 exp 15 = 36.35 exp 15 um
36.35 g = 36.35E15 micrometer
II. Millimetre
Conversion:
1 g = 1 milliliter
36.35 g = X milliliter
Cross-multiplying, we have;
X = 36.35 * 1 = 36.35 milliliter
Next, we would convert milliliter to millimetre;
1 milliliter = 10 millimetre
36.35 milliliter = X millimetre
Cross-multiplying, we have;
X = 36.35 * 10 = 363.5 millimetre
36.35 g = 363.5 millimetre
III. Kilogram
Conversion:
1000 grams = 1 kilogram
36.35 g = X kilogram
Cross-multiplying, we have;
X * 1000 = 36.35 * 1
Dividing both sides by 1000, we have;
X = 36.35/1000 = 0.03635 kilogram
36.35 g = 0.03635 kilogram
Note:
g is the symbol for grams.Exp (E) means exponential = 10um is the symbol for micrometer.what is the meaning of coulomb in physics ????
Coulomb, unit of electric charge in the metre-kilogram-second-ampere system, the basis of the SI system of physical units. ... The coulomb is defined as the quantity of electricity transported in one second by a current of one ampere.
Mark me as brainliest....
The electric motor in the car is powered by a battery.
To charge the battery, the car is plugged into the mains supply at 230 V
The power used to charge the battery is 6.9 kW
Calculate the current used to charge the battery.
Answer:
I = 30 A.
Explanation:
Given that,
The voltage of the battery, V = 230 V
Power used to charge the battery, P = 6.9 kW
We need to find the current used to charge the battery. The formula for the power is given by :
P = VI
Where
I is current
So,
So, the required current is 30 A.
The emf, formerly known as electromotive force, is actually... a potential difference. a field. a force. an energy.
Answer:
The correct option is (a) "potential difference".
Explanation:
EMF is an Electromotive force. It is the energy per unit electric charge that is imparted by an energy source, such as an electric generator or a battery. One of the terminals of device is positive and other is negative. It is also defined as terminal potential difference when no current flows.
It is actually a potential difference across the terminals.
Answer:
potential difference
Explanation:
What happen to the frequency of transverse vibration of a stretched string if its tension is halved and the area of cross section of the string is doubled?
Answer:
The fundamental frequency of the stretched string is:
[tex]f=[/tex] [tex]\frac{1}{2} \sqrt{\frac{T}{L} }[/tex] [ T = Tension and μ = mass per unit length]
Here,
μ = [tex]\frac{m}{L} = \frac{Vp}{L} = Ap[/tex]
[tex]f= \frac{1}{2} \sqrt{\frac{T}{Ap} }[/tex]
If T is halved and A is doubled,
[tex]f= \frac{1}{2} \sqrt{\frac{T'}{A'p} } = \sqrt{\frac{1}{2* 2* A* p} } = \frac{1}{2} (\frac{1}{2} \sqrt{\frac{T}{Ap} } = \frac{1}{2} f[/tex]
Thus, the frequency is reduced to half if its tension is halved and the area of cross-section of the string is doubled.
When the tension is halved and the area of cross section is doubled, the frequency increases by a factor of 1.414.
The frequency of transverse vibration of a stretched string is calculated as follows;
[tex]f = \frac{1}{2l} \sqrt{\frac{T}{\mu} }[/tex]
where;
T is the tension on the stringμ is the mass per unit length[tex]f = \frac{1}{2l} \sqrt{\frac{T}{\mu} }\\\\f = \frac{1}{2l} \sqrt{\frac{Tl}{m} } \\\\f = \frac{l^2}{2l} \sqrt{\frac{T}{m} } \\\\f = \frac{A}{2l} \sqrt{\frac{T}{m}}[/tex]
when the tension is halved and the area of cross section is doubled, the frequency is calculated as;
[tex]\frac{f_1}{A_1 \sqrt{T_1} } = \frac{f_2}{A_2\sqrt{T_2} } \\\\f_2 = \frac{f_1 A_2\sqrt{T_2}}{A_1 \sqrt{T_1} }\\\\f_2 = \frac{f_1 \times 2A_1\sqrt{0.5T_1} }{\sqrt{T_1} }\\\\f_2 = \frac{f_1 \times 2A_1 \times 0.7071\sqrt{T_1} }{\sqrt{T_1} }\\\\f_2 = 1.414 f_1[/tex]
Thus, when the tension is halved and the area of cross section is doubled, the frequency increases by a factor of 1.414.
Learn more about tension in a string here: https://brainly.com/question/25743940
The categories specified in the DSM: a. change from edition to edition b. are influenced by social trends c. may reflect Western cultural biases d. a, b, and c
Answer:
The correct alternative is Option b (are influenced by social trends).
Explanation:
DSM seems to be a mental sickness seems to be a psychiatric disease. Mental diseases are disorders of healthcare that affect emotions, thought, as defined mostly on the American Psychological Association website.Psychological disorders are socially associated or connected, workplace and familial issues as well as problems.There is no connection between the other three choices. Thus, the answer is right.
when you order clothes, does the sweater has to be longer than your shirt to fit you just like the shirt?
Answer:
Yes.⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
show that pv=nrt has the same unit with energy
Answer:
The unit of the equation P·V = n·R·T is the Joules which is the same as the unit of energy
Explanation:
The unit of energy is Joules, with symbol J
The given equation for an ideal gas is P·V = n·R·T
Where;
P = The pressure of the gas with units Pascals, Pa
V = The volume of the gas, with units m³
n = The number of moles with unit moles
R = The universal gas constant = 8.314 J/(mol·K)
T = The temperature, with units, Kelvin, K
Therefore, we get;
P·V has unit 1 Pa × 1 m³ = 1 N/m² × 1 m³ = 1 N·m = 1 Joule
Similarly, we get
n·R·T with units n mole × 8.314 J/(mol·K) × 1 K = 8.314·n Joules
Therefore, P·V = n·R·T, has the unit of Joules which is the same unit with energy.
3) A woman wearing high heels will find difficult to walk on the sandy beach than if she wears flat sole sandals. Why?
4) The rear wheels of a tractor are very wide. Why?
5) Foundation of tall buildings are kept wide and broad. Why?
Answer:
its because more area less pressure
How do you calculate joules? someone please help me I beg
Answer:
Joules = Watts × SecondsExplanation:
If you multiply the number of watts by the number of seconds, you'll end up with joules.
Which statement best describes an insulator
TRUE OR FALSE. if an object does not change its position at a given time interval, then it is at rest or its speed is zero or not accelerating
Answer:
true
Explanation:
a body can only be accelerating and have speed if it's in motion
What does the temperature of the gas between galaxies in galaxy clusters tell us about the mass of the cluster
Answer:
HEY THERE!
Explanation:
The temperature tells us the average speeds of the gas particles, which are held in the cluster by gravity, so we can use these speeds to determine the cluster mass
HAVE A GOOD DAY!
why is the tin of regular coke sink in water?
Answer:
This happens because the tin is made of estañum, and the estañum is denser than the water.
Remember the relation:
density = mass/volume
The general rule is that if an object is denser than water, it will sink
If an object is less dense than water, like a piece of wood, it will float.
And if an object has the same (or nearly the same) density as water, it will float, but fully submerged.
Based on that, we can conclude that the tin will sink because it's density is larger than the density of the water.
The power of the kettle was 1.5 kW. The 0.2kg heating element took 5 seconds to heat from 20 °C to 100 °C. Calculate the specific heat capacity of water using this information.
Answer:
Specific heat capacity, c = 468.75 J/Kg°C
Explanation:
Given the following data;
Power = 1.5 kW to Watts = 1.5 * 1000 = 1500 Watts
Time = 5 seconds
Mass = 0.2 kg
Initial temperature = 20°C
Final temperature = 100°C
To find specific heat capacity;
First of all, we would have to determine the energy consumption of the kettle;
Energy = power * time
Energy = 1500 * 5
Energy = 7500 Joules
Next, we would calculate the specific heat capacity of water.
Heat capacity is given by the formula;
[tex] Q = mcdt[/tex]
Where;
Q represents the heat capacity or quantity of heat. m represents the mass of an object. c represents the specific heat capacity of water. dt represents the change in temperature.dt = T2 - T1
dt = 100 - 20
dt = 80°C
Making c the subject of formula, we have;
[tex] c = \frac {Q}{mdt} [/tex]
Substituting into the equation, we have;
[tex] c = \frac {7500}{0.2*80} [/tex]
[tex] c = \frac {7500}{16} [/tex]
Specific heat capacity, c = 468.75 J/Kg°C
Can somebody help me understand this
If the Big Bang theory is correct, then the universe is billions of years old. And if the Big Bang theory is correct, then the universe was not created in six days. Thus, if the universe is billions of years old, then it was not created in six days. Group of answer choices No answer text provided. Deductive Inductive No answer text provided.
Answer:
Deductive
Explanation:
Deductive reasoning or logic is the form of logic where the reasoning process from which the conclusion is reached is based on one or more premises. Deductive logic, is a top down logic, where premises are linked with conclusion, such that true premises give a true conclusion which is reached by a process of narrowing the focus based on certainty
The question bases the conclusion on the premise that the Big Bang theory which is based on scientific evidence is several billions of years old and if the theory is correct the universe (as it is today) was not created six days
The most successful types of plants on Earth are
Answer:
The angiosperms dominate Earth's surface and vegetation in more environments, particularly terrestrial habitats, than any other group of plants. As a result, angiosperms are the most important ultimate source of food for birds and mammals, including humans.
Explanation:
plz mark brainlest
A car starts from rest .If its acceleration is 1.5m/s^2 in 1.5 seconds. then calculate the distance traveled by it.
Answer:1.6875 m
Explanation:
Formula= 1/2 x at^2
If sensed fuel in the Piper Archer reaches ____ gallons in either tank, the yellow Low Fuel caution light will illuminate on the MFD for the corresponding side
Answer:
10 litres.
Explanation:
The air fuel ratio for aircraft is 12:1. It is due to simplicity piper archer is equipped with continuous flow injection system. There is a fuel sensing is Piper Archer which informs the pilot about the low fuel when the fuel level reaches to as low as 10 litres only in the tank. The yellow low furl light will illuminate to alert the pilot.
At what common temperature will a block of wood and a block of metal both feel neither hot nor cold to the touch? 1. when the temperature of the blocks is higher than the temperature of your hand 2. when the temperature of the blocks is the same as the temperature of your hand 3. when the temperature of the blocks is lower than the temperature of your hand 4. at room temperature 5. at the freezing point
When the temperature of the blocks is the same as the temperature of your hand, you feel neither hot nor cold to the touch. Hence, option ( 3) is correct.
What is temperature?Temperature is a unit used to describe hotness or coldness. It can be stated in terms of any number of arbitrary scales and shows the direction in which heat energy will naturally flow, i.e., from a hotter body to a colder body (one at a lower temperature).
Temperature is not the same as the energy of a thermodynamic system; for instance, an iceberg has a significantly larger total heat energy than a match, despite the fact that a match is burning at a much higher temperature.
If you touch a block that is at higher than or at lower than the temperature of your hand, you feel hot or cold respectively. But, when the temperature of the blocks is the same as the temperature of your hand, you feel neither hot nor cold to the touch.
Learn more about temperature here:
https://brainly.com/question/11464844
#SPJ5
difine scalar quantity
Scalar quantity are physical quantities that have just magnitude, not direction.
It is always positive.Examples: Speed, distanceFind the sum. Express the answer in scientific notation. (1.54 x 10^6)+(6.15 x 10^6)
Answer:
[tex] { \tt{(1.54 \times {10}^{6}) + (6.15 \times {10}^{6}) }} \\ = { \tt{(1.54 + 6.15) \times {10}^{6} }} \\ = { \tt{7.69 \times {10}^{6} }}[/tex]
The U.S. has plans to build a 30-meter telescope, while the Europeans are thinking about a 39-meter telescope. What technological innovation allows astronomers to be thinking about telescopes with that large an aperture
Answer:
The mirror in these telescopes will be constructed from many smaller mirrors which will work together.
Explanation:
A telescope is defined as an optical instrument that is used to observe or view the distant objects. A telescope is made up of curved lenses or mirrors or by combining both.
In the context, both the US and the Europeans are planning to make a telescope which is 30 m and 39 m respectively. This could be possible as the mirrors that are used to make these telescope will be made from a many smaller mirrors that will work together as a single large mirror having a very large aperture.
What is this?
Picture
Answer:
may be upside down alphabet :"T"
Explanation:
An electrostatic paint sprayer has a 0.17 m-diameter metal sphere at a potential of 25.0 kV that repels charged paint droplets onto the object to be painted, which is grounded (electric potential of 0).
Answer:
[tex]q=0.236uC[/tex]
Explanation:
From the question we are told that:
Diameter [tex]d=0.17m[/tex]
Radius [tex]r=0.17/2=>0.085[/tex]
Potential [tex]E=25.0kV[/tex]
Generally the equation for Potential on spere is mathematically given by
[tex]E=\frac{1}{4 \pi e_0}*\frac{q}{r}[/tex]
Therefore
[tex]q=\frac{25*10^3*0.085}{\frac{1}{4 \pi e_0}}[/tex]
Where
[tex]\frac{1}{4 \pi e_0}=9*10^9[/tex]
Therefore
[tex]q=\frac{25*10^3*0.085}{(9*10^9}}[/tex]
[tex]q=0.236uC[/tex]
convert the following quantities
[tex]25m {}^{2} \: into \: cm {}^{2} [/tex]
Answer:
[tex] \rm 250000 \; cm^2 [/tex]
Explanation:
Refer to the attachment.
Classes. frequency
0-20 2
20-40. 2
40-60. 3
60-80 12
80-100 18
100-120 5
120-140. 2
Find mean, median and mode
Answer:
The mean is 79.[tex]\overline {54}[/tex]
The median is 80 - 100
The mode is 80 - 100
Explanation:
The given table is presented as follows;
[tex]\begin{array}{lcrc}Classes&Mid \ point &Frequency &Frequency \times Mid \ point\\0 - 20&10& 2&20\\20-40&30&2&60\\40-60&50&3&150\\60-80&70&12&840\\80-100&90&18&1620\\100-120&110&5&550\\120-140&130&2&260\end{array}[/tex]
The mean of a class of values, [tex]\overline x[/tex] = ∑(Frequency × Midpoint)/∑(Frequency)
Therefore, we get;
[tex]\overline x[/tex] = (20+60+150+840+1620+550+260)/(2+2+3+12+18+5+2) = 79.[tex]\overline {54}[/tex]
The mean, [tex]\overline x[/tex] =79.[tex]\overline {54}[/tex]
The median class = The middle value lass = The class at the 22 nd value = 80 - 100
The median = 80 - 100
The modal class = The class with the highest frequency = 80 - 100
The mode = 80 - 100
Which of the following is NOT TRUE about food irradiation?
O It is practiced around the world.
O It leaves food mildly radioactive.
It is effective in killing microorganisms.
o It destroys microorganisms without cooking.
Answer:
It is practiced around the world .
The statement, that is, food irradiation leaves food mildly radioactive is not true.
• A technology, which uses ionizing radiation to improve safety and extend the shelf life of foods by eliminating and reducing insects and microbes is known as food irradiation.
• Irradiation is used in canning fruits and vegetables and pasteurizing milk to make food safer for consumption.
• Irradiation does not compromise nutritional quality, makes food radioactive, or change the texture, text, or appearance of food. The effect of irradiation is so minimal that it is not easy to identify that whether the food is irradiated.
• Food irradiation has been approved in over forty countries and is almost practiced globally.
Thus, the statement, that is, it leaves food mildly radioactive is incorrect.
To know more about:
https://brainly.com/question/19586033
what do you think will happen to the people in the airplane if their location is unknown?
Question:
What do you think will happen to the people in the airplane if their location is unknown?
My opinion:
I mean what are the circumstances? Is it just a rogue pilot that takes a random plane with all the passengers Hostage or is It bad whether an they lose connection to the airport? I Mean either way, If I was on a plane being held hostage, or the plane crashing, I Would be a in a panic type state of mind. I Would be worried about what will happen when the plane crashes, I would worry about my friends or family that is aboard the plane with me, I Would be scared for my life because I Don't know if i would make it out alive.
Also:
How would they know their location is unknown wouldn't the Pilot be the only one to know exactly where there with their navigating system, But then again there was this time I headed to Florida an They had mini tv's on the seats of each chair, where you could: Watch movies, listen to music, an Also see exactly where you are in the world. It was really amazing actually.
If an object is thrown in an upward direction from the top of a building 160 ft high at an initial speed of 30 mi/h, what is
its final speed when it hits the ground? (Disregard wind resistance. Do not reflect negative direction in your answer.)
ft/s
110 fus
100 ft/s
097 ft/s
91 ft/s
NEXT QUESTION
© ASK FOR HELP
TURN ITIN
Answer:
We can use 2 g H = v2^2 - v1^2 or
v2^2 = 2 g H + v1^2
Since 88 ft/sec = 60mph we have 30 mph = 44 ft/sec
The object will return with the same speed that it had initially so the object
starts out with a downward speed of 44 ft/sec
Then v2^2 = 2 * 32 ft/sec^2 * 160 ft + 44 (ft/sec)^2
v2^2 = (2 * 32 * 160 + 44^2) ft^2 / sec^2 = 12180 ft^2/sec^2
v2 = 110 ft/sec