Answer:
defective
Explanation:
In an electronic firm it is necessary to keep check for every circuit as they turn out to be defective. There can be minor error is circuit formation but this will be considered as defective because circuits are very sensitive and even minor error can lead to short circuits which could lead to a disaster. It is necessary for a firm to keep track and quality of every circuit should be checked.
Find the average payment period if accounts payable is $20,000, cost of goods sold is $200,000, and sales are $500,000.
Answer:
36.5
Explanation:
Account payable = $20,000
The cost of goods sold is $200,000
Sales are $500,000
The average payment period can be calculated as follows
= 20,000/200,000/365
°= 20,000/547.9
36.5
Henbe the average payment period is 36.5
Bellevue Company has 26,000 units of inventory on hand at December 31. It sold 1,950 units which are in transit and were shipped FOB destination. Bellevue purchased 3,250 units which were shipped FOB shipping point by the seller and are still in transit. What is the total amount of inventory to which Bellevue has legal title at December 31
Answer:
24050
Explanation:
Calculation to determine the total amount of inventory to which Bellevue has legal title at December 31
Using this formula
Inventory=Inventory on hand at December 31- Units in Transit
Let plug in the formula
Inventory=26,000 units- 1,950 units
Inventory=24050
Therefore the total amount of inventory to which Bellevue has legal title at December 31 is 24050
Ayayai Corp. reported net income of $87300 for the year. During the year, accounts receivable increased by $5820, accounts payable decreased by $3880 and depreciation expense of $9700 was recorded. Net cash provided by operating activities for the year is
Answer: $87,300
Explanation:
Net cash provided by operating activities are those that are generated from the operations of the company.
The calculation is:
= Net income + Depreciation - Accounts receivable increase - accounts receivable decrease
= 87,300 + 9,700 - 5,820 - 3,880
= $87,300
Your best friend has an idea for a drive-through bar. Indicate the best explanation for why others have not taken advantage of her idea.
A. Unprofitable.
B. Government intervention.
C. True innovation.
D. Market failure.
Answer: B. Government intervention.
Explanation:
A Drive-through bar could be very profitable as it involves people simply pulling up to a window, ordering alcohol and driving away with it. It is not very workable though because it is dangerous.
Drinking and driving is one of the highest causes of road accidents and a drive-through bar is literally encouraging people to do that. The government has therefore intervened by enacting laws to limit the trading of liquor in such ways so as to reduce the instance of road accident.
Assume tuition at the University of Virginia cost $2,962 (per semester) in 2004 and $11,584 in 2012. If the price index was 184 in 2004 and 226 in 2012, then we could say tuition has increased more slowly than inflation. tuition has increased much more rapidly than inflation. tuition has increased at about the same rate as inflation. nominal tuition has increased. tuition suffers from menu costs due to inflation.
Answer:
tuition has increased much more rapidly than inflation.
Explanation:
2.6
18.6
Explain the three system inhibitors of waste, variability and inflexibility and how they can be inefficient to corporations.
Answer and Explanation:
Waste occurs when a company uses inputs that do not add value to their customers. In other words, something customers are not willing to pay for is classified as waste to the company.
Variability is predictability or unpredictability as regards the products of the company. This is what customers expect the products of the company to be like everytime they buy, a certain standard. Example when a customer buys food from a restaurant and expects it to taste the same everytime.
Inflexibility or rigidity occurs when a company isn't flexible enough to adapt easily to customer's expectations such as product mix, changes in demand of their products etc.
These three inhibitors if not handled properly will lead to bad resource management causing customer and employee dissatisfaction.
The model of competitive markets relies on these three core assumptions:
1. There must be many buyers and sellers-a few players can't dominate the market.
2. Firms must produce an identical product-buyers must regard all sellers' products as equivalent.
3. Firms and resources must be fully mobile, allowing for free entry into and exit from the industry.
The first two conditions imply that all consumers and firms are price takers. While the third is not necessary for price-taking behavior, assume for this problem that a market cannot maintain competition in the long run without free entry.
Identify whether or not each of the following scenarios describes a competitive market, along with the correct explanation of why or why not.
Scenario Competitive
1. Several stores in the mall sell hooded sweatshirts. Each store's sweatshirts reflect the style of that particular store. Additionally, some stores use higher-quality cotton than others, which is reflected in the apparel's prices.
2. In a small town, there are two providers of broadband Internet access: a cable company and the phone company.
The Internet access offered by both providers is of the same speed.
3. There are hundreds of high school students in need of algebra tutoring services in Dallas.
4. Dozens of companies offer tutoring services, and the parents who seek out tutors view the quality of the tutoring at the different companies to be largely the same.
5. The government has granted a patent to a pharmaceutical company for an experimental AIDS drug. That company is the only firm permitted to sell the drug.
Answer:
Following are the solution to the given points:
Explanation:
For point 1:
No, not the same thing Because the product is not the same, the marketplace is monopolistic and not completely competitive.
For point 2:
No, not a bunch of salespeople Because the product is the same any maker wishes to enter into the market, the competitive market also does not mean that only two vendors and not so many sellers present in the market.
For point 3 and 4:
Yes, it is aggressive algebra upon on market Same students and several teaching qualities everywhere.
For point 5:
No, no free admissionm, it was not a regulated business. The rationale would be that the entrance to the market via patent rights is restrained by the state.
ABC systems ________. Multiple Choice will allocate costs based on the overall level of activity highlight the different levels of activities usually will undercost complicated or complex products will limit cost drivers to units of output
Answer: highlight the different level of activities
Explanation:
Activity Based Costing system assigns costs to the activity that are used in production and it highlight the different level of activities.
Activity based costing system is quite different from the traditional costing systems based on the way the indirect cost is being treated.
15. Ilang lalawigan ang bumubuo sa Gitnang Mindanao?
Answer:
6 region any meron SA mindanao
Bill operates a proprietorship using the cash method of accounting, and this year he received the following: $140 in cash from a customer for services rendered this year a promise from a customer to pay $192 for services rendered this year tickets to a football game worth $230 as payment for services performed last year a check for $178 for services rendered this year that Bill forgot to cash How much income should Bill realize on Schedule C
Answer:
$548
Explanation:
Calculation to determine How much income should Bill realize on Schedule C
Income realized=$140+ $230 + $178
Income realized= $548
Therefore How much income should Bill realize on Schedule C is $548
Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data:
Total machine-hours
Total fixed manufacturing overhead cost
Variable manufacturing overhead per machine-hour 31,400 $219,800 4
Recently. Job T687 was completed with the following characteristics:
Number of units in the job 10
Total machine-hours
Direct materials
Direct labor cost $ 580 $1,160
The total job cost for Job T687 is closest to: (Round your intermediate calculation to 2 decimal places)
Answer:
$1960
Explanation:
The computation of the total cost is shown below:
Total variable overhead estimated is
= (4 × 31400)
= $125600
Now
total overhead estimated is
= Total variable overhead estimated + Total fixed overhead estimated
= $125600 + 219800
= $345400
Now predetermined overhead rate is
= $345400 ÷ 31400
= $11 per machine hour
Now total overhead applied is
= (11 × 20)
= $220
So, total job cost is
= Direct material + Direct labor + Total overhead
= (580+1160+220)
= $1960
The following revenue and expense account balances were taken from the ledger of Acorn Health Services Co. after the accounts had been adjusted on January 31, 20Y7, the end of the fiscal year:
Depreciation Expense $10,000
Insurance Expense 9,000
Miscellaneous Expense 8,150
Rent Expense 60,000
Service Revenue 634,900
Supplies Expense 4,100
Utilities Expense 44,700
Wages Expense 548,200
Requierd:
Prepare an income statement.
Answer and Explanation:
The preparation of the income statement is presented below:
Service revenue $634,900
Less:
Depreciation Expense $10,000
Insurance Expense 9,000
Miscellaneous Expense 8,150
Rent Expense 60,000
Supplies Expense 4,100
Utilities Expense 44,700
Wages Expense 548,200
Net loss -$49,250
For each of the following products and services, indicate whether it is more likely produced in a process operation or in a job order operation.
1. Beach towels
2. Bolts and nuts
3. Lawn chairs
4. Headphones
5. Designed patio
Answer:
Process operations are for when there are multiple goods to be produced. These products normally have the same specifications so can be mass produced.
This is different from Job order operation which is used when a single good is product. It is usually used for customized goods.
Process operations:
Beach towels Bolts and nuts Lawn chairs HeadphonesJob Order operation
Designed patio.what does the "S" represent for the designation GMAW-S?
A. Spray Transfer
B. Pulsed Spray
C. Solid wire
D. Short Circuit Transfer
Help me bro
Answer:
C. Solid wire
Explanation:
HOPE IT' HELP YOU
Amortization. Loan Consolidated Incorporated (LCI) is offering a special one-time package to reduce Custom Autos' outstanding bills to one easy-to-handle payment plan. LCI will pay off the current outstanding bills of $242 comma 000 for Custom Autos if Custom Autos will make an annual payment to LCI at an interest rtae of 9 % over the next 5 years. a. What are the annual payments of the loan? b. What is the amortization schedule for this loan if Custom Autos wants to pay off the loan before the loan maturity in 5 years? c. When will the balance be half paid off? d. What is the total interest expense on the loan over the 5 years?
Answer:
Please find the complete question in the attached file.
Explanation:
Use PMT for the interest amount computation
[tex]PMT(12\%, 55, 232000, 0 , 0) = \$27,894.77[/tex]
At first, the bulk of an initial premium is paid at the rate of interest, and that only the remainder of the small part is used for amortization. The very first three years schedule is shown below:
[tex]Loan\ \ \ \ \ \ \ \ \ \ Annual\ \ \ \ \ \ \ \ \ \ Interest\ \ \ \ \ \ \ \ \ \ Principal\\\\[/tex]
[tex]1\ \ \ \ \ \ \ \ \$232,000.00\ \ \ \ \ \ \ \ \$27,894.77\ \ \ \ \ \ \ \ \$27,840.00\ \ \ \ \ \ \ \ \$54.77\\\\2\ \ \ \ \ \ \ \ \$231,945.23\ \ \ \ \ \ \ \ \$27,894.77\ \ \ \ \ \ \ \ \$27,833.43\ \ \ \ \ \ \ \ \$61.34\\\\3\ \ \ \ \ \ \ \ \$231,883.89 \ \ \ \ \ \ \ \ \$27,894.77\ \ \ \ \ \ \ \ \$27,826.07\ \ \ \ \ \ \ \ \$68.70\\\\[/tex]
By the 49th payment, upwards of half of the initial amount borrowed would be the total principal paid. Using the formula CUMPRINC in excel, the entire principal payment is calculated twice.
Total Interest Expense [tex]= 27,894.77 \times 55 - 232,000 = \$1,302,212.27[/tex]
Accounts receivable $ 18,000 Long-term notes payable $ 21,000 Accounts payable 11,000 Office supplies 2,800 Buildings 45,000 Prepaid insurance 3,560 Cash 7,000 Unearned services revenue 3,000 Compute Chavez Company's current ratio using the above information.
Answer: 2.24
Explanation:
Current ratio = Current Assets / Current liabilities
Current assets = Accounts receivable + Office supplies + Prepaid insurance + Cash
= 18,000 + 2,800 + 3,560 + 7,000
= $31,360
Current liabilities:
= Accounts payable + Unearned service revenue
= 11,000 + 3,000
= $14,000
Current ratio = 31,360 / 14,000
= 2.24
A corporation sold 11,000 shares of its $10 par value common stock at a cash price of $14 per share. The entry to record this transaction would include:___________
Answer:
A credit to Common Stock for $110,000. A further explanation is provided below.
Explanation:
Given:
Corporation sold,
= 11,000
Common stock per value,
= $10
Cash price,
= $14 per share
The entry record would include,
= [tex]Sold \ corporation\times Common \ stock[/tex]
= [tex]11000\times 10[/tex]
= [tex]110,000[/tex] ($)
__________aggregate customers' opinions related to products or services that they have purchased and then suggest them to others with the same interest.
Answer:
Recommendation websites
Explanation:
Recommendation websites aggregate customers' opinions related to products or services that they have purchased and then suggest them to others with the same interest.
These websites make use of customer data based on what they have purchased in the past (product or service) to present to them new/similar products.
A court may pierce an LLC's veil if a.members treat the LLC like a separate organization. b.members keep their assests and the assets of the LLC separate. c.the LLC has too many members. d.members fail to provide adequate capital.
Answer:
d.members fail to provide adequate capital.
Explanation:
In the case when the court might have pierce an LLC veil so in that case the members could fail in order to give the enough capital as neither it is treated as the separate organization, nor its assets could keep as separate and also it has not so much members
So as per the given situation, the option d is correct
Calculating the Cost of Equity. Suppose stock in Lululemon Corporation has a beta of 0.80. The market risk premium is 10 percent and the risk-free rate is 2 percent. What is Lululemon's cost of equity capital?
Calculating the WACC. In addition to the information in the previous problem, suppose Boone has a target debt-equity ratio of 50 percent. Its cost of debt is 8 percent, before taxes. If the tax rate is 34 percent, what is the WACC?
Answer:
Cost of equity capital can be found by the Capital asset pricing model:
Cost of capital
= Risk free rate + beta * market premium
= 2% + 0.8 * 10%
= 10%
Weighted Average Cost of Capital:
= (weight of debt * after tax cost of debt) + (weight of stock * cost of stock)
= (50% * 8% * ( 1 - 34%)) + (50% * 10%)
= 10.28%
The following cost data relate to the manufacturing activities of Chang Company during the just completed year: Manufacturing overhead costs incurred: Indirect materials $ 17,000 Indirect labor 150,000 Property taxes, factory 10,000 Utilities, factory 90,000 Depreciation, factory 147,000 Insurance, factory 12,000 Total actual manufacturing overhead costs incurred $ 426,000 Other costs incurred: Purchases of raw materials (both direct and indirect) $ 420,000 Direct labor cost $ 80,000 Inventories: Raw materials, beginning $ 22,000 Raw materials, ending $ 32,000 Work in process, beginning $ 42,000 Work in process, ending $ 72,000 The company uses a predetermined overhead rate of $20 per machine-hour to apply overhead cost to jobs. A total of 21,700 machine-hours were used during the year. Required: 1. Compute the amount of underapplied or overapplied overhead cost for the year. 2. Prepare a schedule of cost of goods manufactured for the year.
Answer:
Part 1
under-applied overheads = $8,000
Part 2
Schedule of cost of goods manufactured for the year.
Opening Work in process $ 42,000
Add Direct Materials $393,000
Add Direct Labor $ 80,000
Add Applied Overheads $434,000
Less Ending Work In Process ( $ 72,000)
Cost of Goods Manufactured $877,000
Explanation:
The amount of underapplied or overapplied overhead cost for the year.
Applied Overheads = Predetermined overheads rate x Actual machine hours
= $20 x 21,700 machine-hours
= $434,000
Since,
actual manufacturing overhead costs = $ 426,000
and
applied manufacturing overhead = $434,000
then
under-applied overheads = $8,000 ($434,000 - $ 426,000)
Schedule of cost of goods manufactured for the year.
Opening Work in process $ 42,000
Add Direct Materials ($ 22 + $ 420 - $ 32 - $ 17) $393,000
Add Direct Labor $ 80,000
Add Applied Overheads $434,000
Less Ending Work In Process ( $ 72,000)
Cost of Goods Manufactured $877,000
A large manufacturing firm has been selling on a 3/10, net 30 basis. The firm changes its credit terms to 2/20, net 90. What change might be expected on the balance sheets of its customers?
A. Decreased receivables and increased bank loans
B. Increased receivables and increased bank loans
C. Increased payables and decreased bank loans
D. Increased payables and increased bank loan
Answer: Increased payables and decreased bank loans
Explanation:
It should be noted that 3/10, net 30 simply means when customer pays in 10 days, such person will get a 3% discount, if not the person will have to pay in full within the 30 days.
On the other hand, 2/20, net 90 means that when customer pays in 20 days, such person will get a 2% discount, if not the person will have to pay in full within the 90 days.
Therefore, the change that this will lead to on the balance sheets of its customers will be an increased payables as there'll be more time to make payment for the goods and decreased bank loans.
Consider the markets for three products below. Indicate which characteristics of a competitive market are met by these markets.
Market : Gasoline
a. Large number of buyers
b. Standardized good
c. Full information
d. No transaction cost
e. Participants are price takers
Market: barbershop haircuts
a. Large number of buyers
b. Standardized good
c. Full information
d. No transaction cost
e. Participants are price takers
Market: bicycles
a. Large number of buyers
b. Standardized good
c. Full information
d. No transaction cost
e. Participants are price takers
Answer:
Market : Gasoline
b. Standardized good
c. Full information
e. Participants are price takers.
Market : Barbershop haircuts
a. Large number of buyers
c. Full information
Market : Bicycles
a. Large number of buyers
b. Standardized good
c. Full information
d. No transaction cost
Explanation:
The three markets will have different characteristics which will cause the competition. The Gasoline market has standardized product and the customers are price takers. Usually the prices are fixed for the products and there is no bargaining.
Which type of budgeting requests for investment in large assets such as buildings, renovations, software systems and furniture
The type of budgeting requests for investment in large assets is buildings.
An investment property is real estate property purchased with the intention of earning a return on the investment either through rental income, the future resale of the property, or both.
Why do people invest in buildings?Key Takeaways. Real estate investors make money through rental income, appreciation, and profits generated by business activities that depend on the property. The benefits of investing in real estate include passive income, stable cash flow, tax advantages, diversification, and leverage.
Apartment buildings frequently get sold on the basis of their cap rate, which is effectively a multiple of the income they produce. If you increase your building's income by raising rents or cutting expenses, you should be able to sell for a profit.
To learn more about investment in buildings, refer
https://brainly.com/question/11791499
#SPJ2
Wealth Company has the following transactions for the month of November: Purchased materials on account for $300,000 Materials requisitioned for $75,000 Direct labor for the month was incurred (but not yet paid) of $50,000. Actual overhead for the month was $30,000. It has not been paid yet. (Charge to various payables.) Overhead is applied to production at the rate of 50% of direct labor. Jobs totaling $50,000 were transferred from Work-in-Process to Finished Goods. Jobs costing $34,000 were sold. Balances at the beginning of the month were: Materials $34,240 Work-in-Process 0 Finished Goods $12,000 What is the ending balance of Finished Goods
Answer:
Wealth Company
The ending balance of Finished Goods is:
= $28,000
Explanation:
a) Data and Calculations:
Raw materials $300,000 Accounts Payable $300,000
Work in Process $75,000 Raw materials $75,000
Work in Process $50,000 Payroll Payable $50,000
Manufacturing overhead $30,000 Overhead Payable $30,000
Work in Process $25,000 Manufacturing Overhead $25,000
Finished Goods $50,000 Work-in-Process $50,000
Cost of goods sold $34,000 Finished Goods $34,000
Balances at the beginning of the month were:
Materials $34,240
Work-in-Process 0
Finished Goods $12,000
Finished Goods $12,000
Work in process 50,000
Cost of goods (34,000)
Ending balance $28,000
A car dealer acquires a used car for $14,000, with terms FOB shipping point. Compute total inventory costs assigned to the used car if additional costs include
$250 for transportation-in.
$300 for shipping insurance.
$900 for car import duties.
$150 for advertising.
$1,250 for sales staff salaries.
$180 for trimming shrubs.
For computing inventory, what cost is assigned to the used car? Included in Inventory Cost Expensed as incurred Cost 14.000 900 Cost Transportation in Import duties Insurance during shipment Advertising Sales staff salaries 300 150 1,250 16.850S 0 $
Answer: $15,450
Explanation:
The inventory cost of the car is every cost that was incurred to get it to the car dealer and ready for sale.
Total inventory cost assigned is:
= Cost of car + transportation-in + shipping insurance + car import duties
= 14,000 + 250 + 300 + 900
= $15,450
Give examples of various costs Attending college involves incurring many costs. Give an example of a college cost that could be assigned to each of the following classifications. Explain your reason for
assigning each cost to the classification.
a. Sunk cost.
b. Discretionary cost.
c. Committed cost.
d. Opportunity cost.
e. Differential cost.
f. Allocated cost.
Explanation:
i would have to define each of these costs and then assign the best college costs that represents it
a. sunk cost
A sunk cost is a cost that cannot be gotten back, this kind of caost has already being incurred. an example of this college cost would be tuition fee for the past semesters.
b. discretionary cost
this is a cost that the student can survive without. also known as avoidable cost. the cost here would be the amount of money the student spends on dues.
c. commited costs
comitted costs are confirmed costs that the student has to make for services or goods to be taken. this college cost would be book prices
d. opportunity cost as we know is the alternative forgone. that is what was forgone in order to take to schooling. this would be all earnings from working that the individual has foregone since he or she is now a college student
e. this could also be called the incremental cost. thius kind of cost is different between alternatives in in situations where one has to make choices or alternatives. this college cost would be expenditure on attending one school over another school.
f. allocated cost
a cost that is allocated based on the activities that were done while making the product. this would be fee that is charged to a full time college student per course
You are considering a stock that is expected to pay dividends during the next five years of $0.50, $0,52, $0,54, $0,56 and $0.58. You estimate that you can sell the stock for $100 at the end of five years. Your required rate of return is 15% and the stock is currently selling for $65. If you purchase the stock, what rate of return do you expect to earn
Answer:
9.7%
Explanation:
The rate of return can be determined using a financial calculator
Cash flow in year 0 = -65
Cash flow in year 1 = $0.50
Cash flow in year 2 = $0.52
Cash flow in year 3 = $0.54
Cash flow in year 4 = $0.56
Cash flow in year 5 = $0.58 + $100
Rate of return = 9.7%
To find the rate of return using a financial calculator:
1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.
2. After inputting all the cash flows, press the IRR button and then press the compute button.
The management of Wheeler Company has decided to develop cost formulas for its major overhead activities. Wheeler uses a highly automated manufacturing process, and power costs are a significant manufacturing cost. Cost analysts have decided that power costs are mixed; thus, they must be broken into their fixed and variable elements so that the cost behavior of the power usage activity can be properly described. Machine hours have been selected as the activity driver for power costs. The following data for the past eight quarters have been collected:
Quarter Machine Hours Power Cost
1 20,000 $26,000
2 25,000 $38,000
3 30,000 $42,500
4 22,000 $37,000
5 21,000 $34,000
6 18,000 $29,000
7 24,000 $36,000
8 28,000 $40,000
Using the high and low points (i.e., the high-low method), compute a power cost formula. (Note: Round variable rate to three decimal places.)
Total power cost = $_______ + ( $________ x Number of machine hours )
Answer:
Total power cost= 1,250 + 1.375 * number of machine hours
Explanation:
Giving the following information:
Quarter Machine Hours Power Cost
1 20,000 $26,000
2 25,000 $38,000
3 30,000 $42,500
4 22,000 $37,000
5 21,000 $34,000
6 18,000 $29,000
7 24,000 $36,000
8 28,000 $40,000
To calculate the variable and fixed costs, we need to use the following formula:
Variable cost per unit= (Highest activity cost - Lowest activity cost)/ (Highest activity units - Lowest activity units)
Variable cost per unit= (42,500 - 26,000) - (30,000 - 18,000)
Variable cost per unit= $1.375
Fixed costs= Highest activity cost - (Variable cost per unit * HAU)
Fixed costs= 42,500 - (1.375*30,000)
Fixed costs= 1,250
Fixed costs= LAC - (Variable cost per unit* LAU)
Fixed costs= 26,000 - (1.375*18,000)
Fixed costs= 1,250
A company with excess capacity must decide between scrapping or reworking units that do not pass inspection. The company has 19,000 defective units that cost $5.20 per unit to manufacture. The units can be a) sold as is for $2.50 each, or b) reworked for $4.80 each and then sold for the full price of $7.70 each.
What is the incremental income from selling the units as scrap and reworking and selling the units? Should the company sell the units as scrap or rework them? (Enter costs and losses as negative values.)
Answer:
If the company reworks the units, income will increase by $7,600 (55,100 - 47,500).
Explanation:
Giving the following information:
Number of units= 19,000
Sold as-is:
Selling price= $2.5
Rework:
Selling price= $7.7
Incremental income= $4.8
First, we will calculate the effect on income of both options:
Sold as-is:
Effect on income= 2.5*19,000= $47,500
Rework:
Effect on income= 19,000*(7.7 - 4.8)
Effect on income= $55,100
If the company reworks the units, income will increase by $7,600 (55,100 - 47,500).