If you are holding a stack of books at your waist and then you walk across the room your hands did?

Complete question is:

It's is difficult to walk on a wet floor than a smooth floor. Why?

Answer:

Because friction on wet floor is far lesser than on a smooth floor

Explanation:

On wet surfaces, the friction is far lesser than on smooth surfaces and thus the grip between the bottom of your shoes/feet and the ground is very very small and as such walking on the wet surface becomes more difficult. Whereas on Smooth surfaces, there is plenty of friction and as a result, there is enough grip between the bottom of your shoes/feet and the ground thereby making walking far easier.

Answer:

[tex]\Delta H=687.4 J[/tex]

Explanation:

Hello!

In this case, for this melting process, we can identify two sub-processes in order to take the stainless steel from solid to liquid:

1. Heat up from 298.15 K to 1673 K.

2. Undergo the phase transition.

Both process have an associated enthalpy as shown below:

[tex]\Delta H_1=1g*0.5\frac{J}{g*K} (1673K-298.15K)=687.4J[/tex]

[tex]\Delta H_2=0.001kg*\frac{0.260J}{kg} =0.00026J[/tex]

Therefore, the required heat is:

[tex]\Delta H=\Delta H_1+\Delta H_2\\\\\Delta H=687.4J+0.00026J\\\\\Delta H=687.4J[/tex]

Notice the problem is not providing neither the mass or volume, that is why we assumed the mass is 1 g; however, it can be changed to the mass you are given.

Best regards!

Answer:

Did you think you could pull that off-

:I

I live in Japan anyway so.. ウーフ-

Answer:

sorry I don't get it so pls can u repeat the question .

Movement of any object from one position to another position with respect to the observer is called as Motion. Motion Along a Straight Line: When an object moves along a straight line, the motion of the object is called rectilinear motion. For example; motion of a car on highway.

QUESTION:

Which of the following is a definition of motion?

ANSWER:

In physics, motion is the phenomenon in which an object changes its position over time. Motion is mathematically described in terms of displacement, distance, velocity, acceleration, speed, and time.

Given :

A microscope using ultraviolet light is used to study bacteria. If the aperture diameter is 1.5 cm.

Angular size is 0.036 arc seconds.

To Find :

The maximum wavelength that can be used.

Solution :

Converting given angle into radians :

[tex]\theta = \dfrac{0.036}{3600}\times \dfrac{\pi}{180}\\\\\theta = 1.745\times 10^{-7}\ radians[/tex]

Now, we know maximum wavelength is given by :

[tex]\lambda = \dfrac{\theta \times D}{1.22}\\\\\lambda = \dfrac{1.745\times 10^{-7} \times 0.015}{1.22}\ m\\\\\lambda =2.145 \times 10^{-7}\ m[/tex]

Hence, this is the required solution.

Answer:

[tex]\boxed {\boxed {\sf 14 \ meters \ per \ second}}[/tex]

Explanation:

Speed is the rate of motion and can be found by dividing the distance by the time.

[tex]s=\frac{d}{t}[/tex]

The distance covered is 56 meters and the time taken is 4 seconds.

[tex]d= 56 \ m \\t= 4 \ s[/tex]

Substitute the values into the formula.

[tex]s=\frac{56 \ m}{4 \ s}[/tex]

Divide.

[tex]s= 14 \ m/s[/tex]

The speed of the car is 14 meters per second

Answer: (APE X) B

Explanation: I am taking it and I just got it right

The magnetic characteristics of a substance are determined by the magnetic moments of its atoms,  the domains which are closest to the magnet are aligned with its magnetic field, hence option b is correct.

Long-range alignments of magnetic moments in ferromagnetic materials, known as domains, include magnetic moments that all point in the same direction.

This indicates that the atoms' individual magnetic moments are lined up with one another and pointing in the same general direction.

Therefore, a magnetic substance will get magnetized if it is placed close to a magnet. Magnetism is the name for this kind of electricity, hence option b is correct.      

Learn more about the magnet, here:

https://brainly.com/question/10666129

#SPJ2

Answer:

This question is incomplete but the completed question is below

A ray of light parallel to the principal axis of a spherical mirror passes through its _____ after reflection.

(a) focus (b) pole (c) centre of curvature (d) imaginary centre of curvature

The correct option is (a)

Explanation:

After reflection, a ray of light will usually appear to diverge after they hit a spherical mirror, extending behind the mirror to meet at a point (called the focus or focal point) between the pole and the centre of curvature of this mirror.  Hence, option a is the correct option.

Answer:

0.124 miles

Explanation:

Since the radius of the atom R = 10000r where r = radius of nucleus. Now, if r = 2.0 cm = 0.02 m,

R = 10000r

= 10000 × 0.02 m

= 200 m

We know that 1 mile = 1609 m.

So the radius of the atom in miles is R = 200 m × 1 mile/ 1609 m = 0.124 miles

So, the radius of the atom in miles is 0.124 miles  

Answer:

Eccentricity = 0.0557

Semi-major axis = 9,095 km

Angular momentum/mass = 60,116 [tex]\frac{km^{2} }{Sec}[/tex]

Kinetic energies/mass = 24,500 KJ

Potential energies/mass = 21,673 KJ

Explanation:

Eccentricity

To find the eccentricity use the following formula

Eccentricity = [ Altitude from the earth x ( [tex]Velocity^{2}[/tex] / Gravitational parameter for the Earth ) ] - 1

Where

Altitude from the earth radius = Radius of the earth + Altitude of the earth from radius = 6,378 km + 2,210 km = 8,588 km

Velocity = 7,000 m/s

Gravitational parameter for the Earth = 3.986004418 × [tex]10^{14}[/tex]

Eccentricity = ?

Placing values in the formula

Eccentricity = [ ( 8,588 km x 1000 ) x ( [tex]7000^{2}[/tex] / 3.986004418 × [tex]10^{14}[/tex]   ) ] - 1

Eccentricity = 0.0557

Semi-major axis

Total Distance = Semi-major axis x ( 1 - Eccentricity )

Where

Total Distance = 8,588 km

Eccentricity = 0.0557

8,588 x 1,000 m = Semi-major axis x ( 1 - 0.0557 )

8,588,000 m = Semi-major axis x 0.9443

Semi-major axis = 8,588,000 m / 0.9443

Semi-major axis = 9,094,567.40 m

Semi-major axis = 9,094.56740 km

Semi-major axis = 9,095 km

Angular momentum/mass

L = MVR

L/M = VR

Where

V = Velocity = [tex]\frac{7,000 m/s}{1000}[/tex] = 7 km/s

R = Total Radius = Radius of Earth + Altitude = 6,378 km + 2,210 km = 8,588 km

Placing values in the formula

L/M = 7 km/s x 8,588 km = 60,116 [tex]\frac{km^{2} }{Sec}[/tex]

Kinetic energies/mass

Ke = I [tex]W^{2}[/tex]

Ke = [tex]\frac{1}{2} mr^{2}[/tex] [tex]W^{2}[/tex] ( Where I = [tex]mr^{2}[/tex] )

[tex]\frac{ke}{m}[/tex] = [tex]\frac{r^2}{2}[/tex] [tex]W^{2}[/tex]

[tex]\frac{ke}{m}[/tex] = [tex]\frac{r^2}{2}[/tex] [tex]\frac{V^2}{r^2}[/tex] ( [tex]W^{2}[/tex] = [tex]\frac{V^2}{r^2}[/tex] )

[tex]\frac{ke}{m}[/tex] = [tex]\frac{V^2}{2}[/tex]

[tex]\frac{ke}{m}[/tex] = [tex]\frac{7000^2}{2}[/tex]

[tex]\frac{ke}{m}[/tex] = 24,500,000 J

[tex]\frac{ke}{m}[/tex] = 24,500 KJ

Potential energies/mass

PE = mgh

[tex]\frac{PE}{m}[/tex] = gh

Where

g = 9.807 [tex]\frac{m}{s^2}[/tex]

h = 2,210 km x 1,000 = 2,210,000 m

Placing values in the formula

[tex]\frac{PE}{m}[/tex] = 9.807 [tex]\frac{m}{s^2}[/tex]  x 2,210,000 m

[tex]\frac{PE}{m}[/tex] = 21,673,470 J

[tex]\frac{PE}{m}[/tex] = 21,673.470 KJ

[tex]\frac{PE}{m}[/tex] = 21,673 KJ

Just flip one of the batteries to connect one's positive terminal to others negative terminal.

Answer:

it is c trust me im smart

Answer:

By using [tex]v^{2}_{f} = v^{2}_{i} + 2a\Delta y[/tex], with [tex]v_{i} = -12m/s[/tex] and [tex]\Delta y = -40m[/tex]:

[tex]v^{2}_{f} = v^{2}_{i} + 2a/Delta y[/tex]

[tex]v^{2} = (-12m/s)^{2} + 2(-9.80m/s^{2})(-40m)[/tex]

[tex]v = -30m/s[/tex]

Explanation:

Hope this helped!

A rock is thrown downward from the top of a 40 m tall tower, with The speed of the rock just before hitting the ground will be equal to -30 m/s.

Friction is the resistance to a thing moving or rolling over another solid object. Although frictional forces can be advantageous, such as the traction required to walk while slipping, they also provide a significant amount of resistance to motion. In order to overcome frictional resistance in the moving parts, about 20% of an automobile's engine power is used.

The forces of attraction, also referred to as adhesion, between the contact zones of the surface, which are always minutely uneven, seem to be the main contributor to friction between metals.

From the given information in the question,

v²(f) = v²(i) + 2aΔy

v² = (-12 m/s)² + 2(-9.8)(-40)

v = -30 m/s.

Therefore, the velocity of the rock is -30 m/s.

To know more about Friction:

https://brainly.com/question/13000653

#SPJ2

Answer: thrust [tex]-85905.24N[/tex]

delivered power [tex]= -18813247.56W[/tex]

Explanation:

given data:

horizontal speed = 219 m/s

rate of air intake = 77.9 kg/s

fuel combustion rate = 4.19 kg/s.

exhaust gases ejected = 934 m/s

solutuon:

Thrust of the engine

[tex]Fth = Ve * ( Mf - Ma ) - Vj *Ma[/tex]

[tex]= 934 * ( 4.19 - 77.9 ) - 219 *77.9[/tex]

[tex]= -68845.14 - 17060.1[/tex]

=[tex]-85905.24N[/tex]

delivered power

[tex]= Fth * Vj[/tex]

[tex]= -85905.24N * 219[/tex]

[tex]= -18813247.56W[/tex]

Given:

Thrust of the engine will be:

→ [tex]F^{th} = Ve(Mf-Ms)-Vj\times Ma[/tex]

By putting the values, we get

         [tex]= 934(4.19-77.9)-219\times 77.9[/tex]

         [tex]= -68845.14-17060.1[/tex]

         [tex]= -85905.24 \ N[/tex]

hence,

The delivered power will be:

= [tex]F^{th}\times Vj[/tex]

= [tex]-85905.24\times 219[/tex]

= [tex]-18813247.56 \ W[/tex]

Thus the solution above is right.

Learn more about power here:

https://brainly.com/question/20695102

Answer:

Explanation:

Nucleus

Answer:

hey!

the answer is

salt

Explanation:

this is due to sand, grass and pebbles are not soluble (they do not dissolve in water)

pls put brainliest

Answer: The answer is D! Hope this helps!

Explanation:

Answer:

It’s D for ape.x

Explanation:because I’m smarttttttt

Work can be calculated with the equation: Work = Force × Distance. The SI unit for work is the joule (J), or Newton • meter (N • m).

Work = Force × Distance.

W = 10 N × 0.75 m

Answer:

A T-chart is used comparing two sides of a topic for example pros and cons or cause and effect. A star diagram is used for organizing the characteristics of a single topic, a central space is used for displaying the topic, with each point showing or listing an attribute about the topic.

Answer:

b

Explanation:

Answer:

Gravity and Mass

Explanation:

Kinetic energy is the energy of something moving. To get a lot of kinetic energy, there has to be a situation where the gravity is moving in the way the object is moving. The heavier the object, the faster it'll move.

Answer:

d = 80 m

Explanation:

It is given that,

A rock falls for 4 seconds.

We need to find how far did it fall.

let it cover d distance.

Using equation of motion to find it :

[tex]d=ut+\dfrac{1}{2}at^2[/tex]

Here, u = 0 (at rest initially)

a = g

[tex]d=\dfrac{1}{2}gt^2\\\\d=\dfrac{1}{2}\times 10\times 4^2\\\\d=80\ m[/tex]

It will fall at a distance of 80 m.

Answer:

36N

Explanation:

Given parameters:

Mass of apple  = 0.25kg

length of string  = 1m

tangential speed  = 12m/s

Unknown:

magnitude of centripetal force = ?

Solution:

The centripetal force keeps a body moving along a circular path.

It is mathematically derived using the expression below;

      F = [tex]\frac{mv^{2} }{r}[/tex]

F is the centripetal force

m is the mass

v is the tangential speed

r is the radius

  Now insert the parameters and solve;

     F = [tex]\frac{0.25 x 12^{2} }{1}[/tex]  = 36N

Answer:

d = 52.20 miles

Explanation:

Given that,

Devon drove 50 miles west and then drove 15 miles north.

We need to find Devon's displacement. Let it is d. It can be calculated as follows :

[tex]d=\sqrt{50^2+15^2} \\\\=52.20\ \text{miles}[/tex]

Hence, Devon's displacement is 52.20 miles.

Answer: the acceleration is 1.282 m/s²

Explanation:

Given that;

Time t = 13 sec

Initial velocity U = 5 kmph = (5 × 1000)/(60 × 60) = 1.3888 m/s

final velocity V = 65 kmph = (65 × 1000)/(60 × 60) = 18.0555 m/s

Now we know that;

V = U + at

we substitute

18.0555 = 1.3888 + 13a

18.0555 - 1.3888 = 13a

13a = 16.6667

a = 16.6667 / 13

a = 1.282 m/s²

Therefore the acceleration is 1.282 m/s²

Answer:

The speed of the box at the end of the 6 s interval is 7.5 m/s.

Explanation:

Given;

magnitude of the force, f = 15 N

mass of the box, m = 12 kg

initial velocity of the box, u = 0

time of the box motion, t = 6s

The applied force on the box is given by Newton's second law of motion;

f = ma

where;

a is the acceleration of the box

a = f / m

a = (15) / (12)

a = 1.25 m/s²

The final velocity of the box is calculated as;

v = u + at

v = 0 + (1.25 x 6)

v = 7.5 m/s.

Therefore, the speed of the box at the end of the 6 s interval is 7.5 m/s.

Answer:

yo can someone answer i need this

Explanation:

Answer:

instantaneous speed: The instantaneous speed is the speed of an object at a particular moment in time. And if you include the direction with that speed, you get the instantaneous velocity. In other words, eight meters per second to the right was the instantaneously velocity of this person at that particular moment in time.

velocity: the speed of something in a given direction.

acceleration: a vehicle's capacity to gain speed within a short time.

solve problems: Problem solving consists of using generic or ad hoc methods in an orderly manner to find solutions to problems.

Explanation:

Answer:

Explanation:

Pressure will expand a gas, enlarging its volume and reducing its density and concentration of particles. Pressure will magnify a gas, developing its volume and multiplying its density and concentration of particles.

Increasing the pressure of a gas is exactly the same as increasing its concentration. If you have a given mass of gas, the way you increase its pressure is to squeeze it into a smaller volume. If you have the same mass in a smaller volume, then its concentration is higher.