The change in the gravitational potential energy is 102,800.24 J.
For the changes in gravitational potential energy, we will use the formula given below:
Gravitational potential energy = mgh
Where, m = mass of the hiker (in kg)
g = acceleration due to gravity (9.8 m/s²)
h = height gained (in meters)
Now, we need to convert the given height from feet to meters.1 ft = 0.3048 m
Therefore, 490 ft = 490 × 0.3048 m = 149.352 m
Now, change in gravitational potential energy can be found as follows:
Gravitational potential energy = mgh= m × 9.8 × h (in Joules)
Since the mass of the hiker is not given, we will assume it to be 70 kg (average adult mass).
Thus, Gravitational potential energy = 70 × 9.8 × 149.352 J = 102,800.24 J
Therefore, the change in gravitational potential energy is 102,800.24 J.
Learn more about Gravitational potential energy here:
brainly.com/question/3120930
#SPJ11
Martin has severe myopia, with a far point of only 19cm . He wants to get glasses that he'll wear while using his computer, whose screen is 63cm away.
What refractive power will these glasses require?
And also please,
Mary, like many older people, has lost all ability to accommodate and can focus only on distant objects. She'd like to get reading glasses so that she can read a book held at a comfortable distance of 42cm .
What strength lenses, in diopters, does Mary need?
The refractive power required for Martin’s glasses would be -5.26 dioptres (D). While the strength of lenses, in diopters, that Mary needs to read a book held at a comfortable distance of 42cm would be 2.38 D.
Myopia is also known as nearsightedness, and it is a common eye problem. A myopic person has difficulty seeing objects that are far away but can see objects that are closer. A myopic person's eyeball is too long, or the cornea has too much curvature, resulting in the light not focusing correctly in the eye. As a result, objects that are far away appear blurred. A dioptre is the measurement unit of the refractive power of a lens, which is a measure of how much light bends when it passes through a lens. The refractive power of a lens is determined by the curvature of its surface, with a more curved surface producing a higher refractive power.
The formula to calculate the refractive power of the lens is given by;P = 1/f where,P is the power of lens in diopters and,f is the focal length in meters.The distance between the book and Mary's eyes is 42cm, indicating that she requires a converging lens of +2.38 diopters to read the book comfortably.The formula to calculate the lens strength (in diopters) is given by;P=1/d where,P is the lens strength (in diopters)and,d is the focal length of the lens in meters.
More on myopia: https://brainly.com/question/13257948
#SPJ11
The polarization of a partially polarized beam of light is defined as
p=(Imax-Imin)/(Imax+Imin)
where Imax and Imin are the maximum and minimum intensities that are
obtained when the light passes through a polarizer that is slowly rotated. Such light
can be considered as the sum of two unequal plane-polarized beams of intensities
Imax and Imin perpendicular to each other. Show that the light transmitted by a
polarizer, whose axis makes an angle f to the direction in which Imax is obtained, has
intensity
I(f)=(1+pcos2f)Imax/(1+p).
The light transmitted by a polarizer, whose axis makes an angle f to the direction in which Imax is obtained, has intensity: I(f) = (1 + pcos2f)Imax / (1 + p). Light is transmitted due to polarization.
What is the light transmitted through polarizer?
The light transmitted by a polarizer, whose axis makes an angle f to the direction in which Imax is obtained, has intensity I(f) given by:
I(f) = (1 + pcos2f)Imax / (1 + p)
This equation can be derived by considering the light as a sum of two unequal plane-polarized beams of intensities Imax and Imin perpendicular to each other.
Let θ be the angle between the direction of polarization of the light and the direction in which Imax is obtained.
The intensity of light that is transmitted by a polarizer whose axis makes an angle f to the direction in which Imax is obtained can be expressed as:
I(f) = (Imax cos2(θ + f)) + (Imin cos2(θ - f))
Using the equation for polarization of the light
p = (Imax - Imin) / (Imax + Imin)
we can rewrite the expression for I(f) as follows:
I(f) = Imax [(1 + pcos2f) / (1 + p)]
Hence, the light transmitted by a polarizer, whose axis makes an angle f to the direction in which Imax is obtained, has intensity: I(f) = (1 + pcos2f)Imax / (1 + p).
Learn more about Light transmission here:
https://brainly.com/question/3080788
#SPJ11
the beam is supported by the by 2 rods ab and cd that have cross sectional areas of 12mm2 and 8mm2 respectively. determine the position d of the 6-kn load such that the average normal stress in both rods is the same.
The position d of the 6-kn load such that the average normal stress in both rods supporting the beam is the same is 111.5 mm.
First we derive the formula for average normal stress.σaverage = Force/Area
σaverage = P/A .Take 1 as the cross-sectional area of rod ab and find the force it's bearing.Force on rod ab will be equal to the weight of the beam acting downwards + the weight of the 6-kn load acting downwards.
Force = 4×10^4 N + 6×10³ N
Force = 46×10³ N
Now substitute the values in the formula.σ average 1 = P/A
σ average 1 = (46×10²)/(12×10^-6)
σ average 1 = 3.83×10^9 Pa
Now take 2 as the cross-sectional area of rod cd and find the force it's bearing.Force on rod cd will be equal to the weight of the 6-kn load acting downwards.Force = 6×10³ N
Now substitute the values in the formula.σ average 2 = P/A
σ average 2 = (6×10³)/(8×10^-6)
σ average 2 = 0.75×10^9 Pa
σ average 1 = σ average 2 (As given in the question)3.83×10^9 = 0.75×10^9 + (6×10³/A)A = 14.26 mm.The position of the 6-kn load d = 140 mm - 28.5 mm = 111.5 mm.Hence, the position d of the 6-kn load such that the average normal stress in both rods is the same is 111.5 mm.
More on distance: https://brainly.com/question/10950863
#SPJ11
Light or moderate-but-steady precipitation is most often associated with ____ clouds.a. cumulonimbus
b. nimbostratus
c. lenticular
d. altostratus
Calculate the current passing through the circuit when:
a)Switch K1 is closed
b)Switches K1 and K2 are both closed .
c)Switch K1 is open and K2 is closed.
The current passing through the circuit when:
a) Switch K1 is closed is 0.25 A.
b) Switches K1 and K2 are both closed is 1.0667 A.
c)Switch K1 is open and K2 is closed is 0.4 A.
What is Kirchhoff's laws?Kirchhoff's laws are two fundamental principles in electrical circuit analysis that describe the behavior of electric currents and voltages in a closed circuit. These laws are:
Kirchhoff's Current Law (KCL) states that the sum of currents that enter and leave any node in a circuit must equivalent the sum of currents leaving that node.
Kirchhoff's Current Law (KCL) provides that the total of currents entering and leaving any node in a circuit must equal the sum of currents leaving that node. Mathematically, this can be expressed as:
Σi_in = Σi_out
where Σi_in is the sum of the currents entering the node and Σi_out is the sum of the currents leaving the node.
Kirchhoff's Voltage Law (KVL): The sum of the voltages around any closed loop in a circuit must equal zero.
We can use Ohm's and Kirchhoff's laws to solve this problem.
When switch K1 is closed and switch K2 is open:
The total resistance of the circuit is 3 + 5 = 8 ohms. As an outcome, the current flowing through the circuit is:
I = V / R = 2 V / 8 ohms = 0.25 A
When switches K1 and K2 are both closed:
The total resistance of the circuit is now (3 x 5) / (3 + 5) = 15 / 8 ohms, which is equivalent to 1.875 ohms. As an outcome, the current flowing through the circuit is:
I = V / R = 2 V / 1.875 ohms = 1.0667 A
When switch K1 is open and switch K2 is closed:
In this case, the circuit consists only of the 5 ohm resistor, and the voltage across it is still 2 V. As an outcome, the current flowing through the circuit is:
I = V / R = 2 V / 5 ohms = 0.4 A
Note that the current passing through the circuit depends on the resistance of the circuit and the voltage of the battery. When switches are added or removed, the resistance and/or the voltage may change, which will affect the current passing through the circuit.
To know more about Voltage, visit:
https://brainly.com/question/29445057
#SPJ1
Find the frequency with the largest amplitude Find the frequency w for which the particular solution to the differential equation 2 d^2y/dt^2 + dy/dt+ 2y = e^iwt dt has the largest amplitude. You can assume a positive frequency w > 0. Probably the easiest way to do this is to find the particular solution in the form Ae^iwt and then minimize the modulus of the denominator of A over all frequencies w. W
The frequency with the largest amplitude of the wave will be zero. This can be calculated by taking absolute values.
What is the frequency?To solve for the frequency with the largest amplitude, we can use the given differential equation:
2 d2y/dt2 + dy/dt+ 2y = eiwt
To find the particular solution in the form Aeiwt. We then need to minimize the modulus of the denominator of A over all frequencies w > 0.
To do this, we first take the modulus of the denominator by finding the absolute value: |2 + iw|. Since the absolute value of a complex number is its magnitude, this can be further simplified to: sqrt(4 + w2).
To find the value of w that produces the largest amplitude, we can take the derivative of this equation with respect to w and set it to 0, giving us w = 0. This means that the frequency with the largest amplitude is w = 0.
Learn more about Frequency here:
https://brainly.com/question/15819487
#SPJ11
A piece of metal weighing 187.6 g is placed in a graduated cylinder containing 225.2 mL of water. The combined volume of solid and liquid is 250.3 mL. What is the density, in grams per milliliter, of the metal?
The density of the metal is 7.47 g/mL which can be calculated by dividing the mass (187.6 g) of the metal by its volume (250.3 mL).
The volume of the metal by using the displacement method.
When the metal is placed in the graduated cylinder containing water, the water level rises by a certain amount equal to the volume of the metal. Therefore, we can calculate the volume of the metal as follows:
Volume of metal = Volume of solid and liquid - Volume of liquid
Volume of metal = 250.3 mL - 225.2 mL
Volume of metal = 25.1 mL
Now that we have the volume of the metal, we can find its density as follows:
Density of metal = Mass of metal / Volume of metal
Density of metal = 187.6 g / 25.1 mL
Density of metal = 7.47 g/mL
Therefore, the density of the metal is 7.47 g/mL.
To practice more questions about density:
https://brainly.com/question/28734050
#SPJ11
A smooth circular hoop with a radius of 0.500 m is placed flat on the floor. A 0.400-kg particle slides around the inside edge of the hoop. The particle is given an initial speed of 8.00 m/s. After one revolution, its speed has dropped to 6.00 m/s because of friction with the floor. (a) Find the energy transformed from mechanical to internal in the particle–hoop–floor system as a result of friction in one revolution. (b) What is the total number of revolutions the particle makes before stopping? Assume the friction force remains constant during the entire motion.
(a) The energy transformed from mechanical to internal as a result of friction in one revolution is 5.60 J. (b) The total number of revolutions the particle makes before stopping is 10.
(a) To find the work done, the energy transformed from mechanical to internal in the particle–hoop–floor system as a result of friction in one revolution, the following formula is used:
W = ΔK + ΔU + ΔE
The initial kinetic energy of the particle is:
(1/2)mv² = (1/2)(0.400 kg)(8.00 m/s)² = 12.8 J
The final kinetic energy of the particle is:
(1/2)mv² = (1/2)(0.400 kg)(6.00 m/s)² = 7.20 J
Therefore, the change in kinetic energy:
ΔK = Kf – Ki = 7.20 J – 12.8 J = –5.60 J.
The work done by friction is the energy transformed from mechanical to internal. Therefore, the work done is:
–W = –ΔK = –(–5.60 J) = 5.60 J.
Hence, the energy transformed from mechanical to internal in the particle–hoop–floor system as a result of friction in one revolution is 5.60 J.
(b) The work done by friction in one revolution is equal to the change in kinetic energy. Therefore, the work done by friction in n revolutions is n times the work done in one revolution.
W = –ΔK = 5.60J*n
W = 5.60 J
The final kinetic energy of the particle is zero. Therefore, the change in kinetic energy is equal to the initial kinetic energy. Hence,
(1/2)mv² = 12.8 Jv = 8.00 m/s
The time taken for the particle to stop is given by:
v = u – at
0 = 8.00 m/s – a*t
Therefore, t = 8.00 m/s/a
The distance covered by the particle before stopping is equal to the circumference of the hoop. Therefore, the distance is
2πr = 2π(0.500 m) = 3.14 m.
From the equations of motion,
s = ut + (1/2)at²
Therefore,
3.14 m = 8.00 m/s * t + (1/2) a t²
t² = 0.25*(3.14 m - 8.00 m/s*t)
t² = 0.785 – 2*t
3*t = 0.785t = 0.26 s
The acceleration of the particle is given by:
a = –F/m = –μg = –(0.200)(9.80 m/s²) = –1.96 m/s²
t = 8.00 m/s/a = 8.00 m/s/1.96 m/s² = 4.08 s
The time taken for one revolution is equal to the distance divided by the speed, which is 3.14 m/8.00 m/s = 0.3925 s.
n = t/T
n = 4.08 s/0.3925 s = 10.4 ≈ 10.
Therefore, the total number of revolutions the particle makes before stopping is 10.
Learn more about Work done:
https://brainly.com/question/25573309
#SPJ11
A solid ball of radius r_b has a uniform charge density rho. A) What is the magnitude of the electric field at a distance r>r_b from the center of the ball? Express your answer in terms ofrho,r_b,r,andepsilon_0.
E(r)=
The magnitude of the electric field at a distance r > r_b from the center of the ball is given by: E(r) = (1/3) * ρ * r_b³ / (ε₀ * r²).
Magnitude refers to the quantitative measurement of a physical quantity such as length, mass, time, temperature, or energy. Magnitude is expressed in units of measurement, which allows for standardized comparison and communication of measurements between different observers.
Magnitude can also refer to the strength or intensity of a physical phenomenon, such as the magnitude of an earthquake or the magnitude of a magnetic field. In this context, magnitude is typically measured on a logarithmic scale, where an increase of one unit represents a tenfold increase in strength. Magnitude is a fundamental concept in physics that plays a crucial role in quantifying and understanding physical phenomena.
To learn more about Magnitude visit here:
brainly.com/question/29766788
#SPJ4
what do you think might be causing the fluids in the lava lamp to move?
The fluid movement in a lava lamp is caused by the heat generated from the lamp's light bulb, which causes the wax or oil to rise and fall.
A lava lamp contains two fluids of different densities that do not mix. The fluids heat up as a result of the lamp's light bulb, causing them to expand and become less dense. The wax or oil floats up when it becomes less dense than the fluid that surrounds it, creating a globe at the top of the lamp.
The fluid is then cooled by the environment and becomes more dense, causing the wax to sink back to the bottom. This constant motion cycle creates the flowing effect seen in a lava lamp.
The heat from the light bulb causes the fluid to expand, and as it does, it becomes less dense than the surrounding fluid, causing it to float. When the fluid cools, it becomes denser and settles back down to the bottom. This cyclic motion creates the soothing flow of a lava lamp.
For more such questions on lava lamp, click on:
https://brainly.com/question/30542979
#SPJ11
charge q1 is distance s from the negative plate of a parallel-plate capacitor. charge is distance 2s from the negative plate. what is the ratio of their potential energies?
The electric potential energy, U, of two point charges is given by the equation, U = kq1q2/r where k is Coulomb's constant, q1 and q2 are the charges and r is the distance between the two charges. Now, let's solve the question using this equation. There are two charges, q1 and q2, and a parallel plate capacitor between them. The distance of q1 from the negative plate is s, and the distance of q2 from the negative plate is 2s. The charges have the same magnitude of charge, so let's assume q1 = q2 = q. Using the formula mentioned earlier, we get U1= kq^2/sU2= kq^2/2s. Therefore, the ratio of their potential energies is U2/U1= kq^2/2s / kq^2/sU2/U1= (kq^2/2s) × (s/kq^2)U2/U1= 1/2.
Therefore, the ratio of their potential energies is 1:2.
For more information regarding this topic, you can click the below link
https://brainly.com/question/14306881
#SPJ11
Taking the following list on an item-by-item basis (i.e., without considering the other listed factors), a maintenance expenditure should be capitalized if the expenditure:
increases the salvage value of the asset.
extends the useful life of the asset.
A maintenance expenditure should be capitalized if it increases the salvage value of the asset or extends the useful life of the asset.
An expenditure is a payment made in return for a product or service. Capital expenditure is money spent by a company on long-term assets like equipment and buildings.
Capitalizing refers to recording a cost or expense on the balance sheet for a future period rather than recognizing it immediately in the current period.
Capitalizing expenditure means the company will recognize the expenditure as an asset, which will be amortized over its useful life as opposed to expenses in the current period.
Therefore, a maintenance expenditure should be capitalized if the expenditure increases the extends the useful life of the asset.
Learn more about expenditure here:
https://brainly.com/question/935872
#SPJ11
two in-phase loudspeakers, which emit sound in all directions, are sitting side by side. one of them is moved sideways by 6.0 m , then forward by 4.0 m . afterward, constructive interference is observed 14 , 12 , and 34 the distance between the speakers along the line that joins them, and at no other positions along this line.Part A What is the maximum possible wavelength of the sound waves ?
The maximum possible wavelength of the sound waves is 6 meters.
What are in-phase loudspeakers?In-phаse loudspeаkers аre а type of speаker system thаt emit sound wаves in phаse. In-phаse meаns thаt the sound wаves аre coming from the speаkers аt the sаme time аnd in the sаme direction. When two in-phаse loudspeаkers аre put together, they cаn produce constructive interference. In this cаse, when one loudspeаker is moved, constructive interference occurs аt specific points аlong the line thаt joins them.
The mаximum possible wаvelength of the sound wаves cаn be cаlculаted using the formulа:
λmаx = 2d
Where:
λmаx = mаximum possible wаvelengthd = distаnce between the loudspeаkersАlong the line thаt joins them, constructive interference is observed аt three points: 14 m, 12 m, аnd 34 m. Therefore, the distаnce between the speаkers should be equаl to one of the wаvelengths. To find the mаximum possible wаvelength, we need to find the lаrgest distаnce between the speаkers.
In this cаse, the distаnce between the speаkers is 6 m (sidewаys movement) + 4 m (forwаrd movement) = 10 m. Therefore, the mаximum possible wаvelength of the sound wаves is 2 × 10 m = 6 m.
For more information about In-phаse loudspeаkers refers to the link: https://brainly.com/question/30030701
#SPJ11
the two wires are made of the same material. what are the current and the electron drift speed in the 2.0 mm diameter segment of the wire
The current flowing in the 2.00 mm diameter segment of the wire is 2.56L × 10⁻² A and the electron drift speed in the 2.00 mm diameter segment of the wire is 0.028 m/s.
Electric Current: The movement of electrons constitutes an electric current. It is measured in amperes (A).
Electron Drift Speed: When an electric field is applied to a metal wire, the electrons within the wire move in response to the field.
The average speed of electrons in the metal wire is known as electron drift speed. It is given by = I / (nAq),
Where, n is the number of electrons per unit volume of the conductor,
A is the cross-sectional area of the conductor, and
q is the charge on an electron.
Given data shows that both wires are made of the same material so the material properties (number density of electrons, atomic properties) are constant for both wires.
Hence, the electron drift speed in both wires would be the same. Let’s say the current flowing in both wires is I1 and I2 respectively and the diameter of the wire is 2.00mm or radius R = 1.00mm.
According to Ohm’s Law = the resistance of the wire can be expressed as R = ρL / A
where ρ is the resistivity of the wire,
L is the length of the wire, and
A is the cross-sectional area of the wire.
The cross-sectional area of the wire can be written as = πR²
Now combining both equations of resistance and the cross-sectional area we get,
R = ρL / πR²Now, I = V / R
So, I = V πR² / ρL
The current density can be written as J = I / A = V πR² / ρL πR²
Now we can express V as J ρL = I
Substitute the given values,
Current density J = 3.00 × 10⁶ A/m²ρ = 2.70 × 10⁻⁸ Ωm
Diameter of wire = 2.00mm
Therefore, the radius of wire = R = 1.00 mm = 1.00 × 10⁻³ m
Using the given formula, I = J πR²ρLSo, I = 3.00 × 10⁶ × π × (1.00 × 10⁻³)² × 2.70 × 10⁻⁸ × L = 2.56 L × 10⁻² A
The electron drift speed can be written as, v = I / (nAq)
Let’s say the number of electrons per unit volume of the conductor is n, the electron charge be q and
the length of the wire be L.
Then, L × πR² × nq = where m is the mass of the conductor.
L × πR² × nq = ρV
Where ρ is the density of the conductor and
V is the volume of the conductor.
So, V = πR²Lρ And, L × πR² × nq = ρπR²L
Therefore, nq = ρ
The electron drift velocity is given as,v = I / (nAq)So, v = I / (n × πR² × q)
The number density of electrons n can be expressed as = N / V
Where N is the total number of electrons in the conductor.
Substituting the given values,
Number density n = 8.49 × 10²⁸ / (π(1.00 × 10⁻³)² × L × 2.70 × 10⁻⁸)
Current I = 2.56L × 10⁻² A
Electron charge q = 1.6 × 10⁻¹⁹ C
Cross-sectional area A = πR²
Where radius R = 1.00mm or R = 1.00 × 10⁻³ m.
Now substituting the above values
we get, v = 2.56L × 10⁻² / (8.49 × 10²⁸ / (π(1.00 × 10⁻³)² × L × 2.70 × 10⁻⁸) × π(1.00 × 10⁻³)² × 1.6 × 10⁻¹⁹)
Hence the electron drift speed can be calculated as v = 0.028 m/s.
To learn more about electron drift speed:https://brainly.com/question/14293455
#SPJ11
what is the magnitude of the electrostatic force and between a charge of 3:0 105 coulomb and a charge of 6:0 106 coulomb separated by 0.30 mete
The electrostatic force between a charge of 3.0 × 10⁵ coulomb and a charge of 6.0 × 10⁶ coulomb separated by 0.30 meters has a magnitude of 0.013 N (newton).
What is the magnitude of electrostatic force?The electrostatic force is given by Coulomb’s law, which states that the magnitude of the electrostatic force between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them, Coulomb’s Law states that the magnitude of the electrostatic force between two point charges is given by:
F = (kq₁q₂)/r²
where, F is the magnitude of the electrostatic force q₁ and q₂ are the two point charges separated by a distance r k is Coulomb’s constant k = 9 × 10⁹ N·m²/C², and.
The distance is measured in meters. So, putting the values into the formula:
F = (9 × 10⁹ N·m²/C²) (3.0 × 10⁵ C) (6.0 × 10⁶ C) / (0.30 m)²
F = (9 × 10⁹ × 3.0 × 10⁵ × 6.0 × 10⁶) / (0.30)²
F = (9 × 9) × (3 × 2) × 10³ × 10³ / (3 × 10)² N = (81 × 10⁶) / (9) N = 9 × 10⁶ / (1) N = 9 × 10⁶ N = 9,000,000 N or 9.0 × 10⁶ N.
Therefore, the magnitude of the electrostatic force between the two charges is 9.0 x 10⁶ N.
Read more about force here:
https://brainly.com/question/12785175
#SPJ11
if a star has very weak hydrogen lines and is blue, what does that most likely mean?
Blue color and weak hydrogen lines indicate a hot and young star with low hydrogen content. It may have an outer layer rich in helium or heavier elements and has not fused enough hydrogen into helium.
When a star is blue and has extremely faint hydrogen lines, it is most likely a bright, young star with an outer layer rich in heavier elements such as helium rather than hydrogen. Given its blue hue, the star is hotter than most other stars, with a surface temperature of at least 10,000 Kelvin. Because the star hasn't been on the main sequence for very long, it may not have had enough time to fuse hydrogen into helium in its core, which is why the hydrogen content of the star is low, according to the weak hydrogen lines.
learn more about weak hydrogen lines here:
https://brainly.com/question/13046293
#SPJ4
https://imagebank.illuminateed.com/imagebank/1663644
In which state, or states, of matter can particles expand to completely fill their container?
A
II
B
I
C
III
D
I, II, and III
D. I, II, and III. The three states of matter (solid, liquid, and gas) can expand to completely fill their container
What is Matter?
Matter refers to anything that has mass and takes up space. It is the physical substance that makes up the universe and everything within it. Matter can exist in various forms, such as solid, liquid, gas, or plasma. These different forms of matter are characterized by the arrangement of particles that make up the substance and how those particles behave.
It is the basic building block of the universe and everything around us is made up of matter.
Solids have a fixed shape and volume, but they can expand slightly with changes in temperature. Gases, on the other hand, have neither a fixed shape nor a fixed volume and can expand to completely fill their container.
Learn more about Matter from given link
https://brainly.com/question/1172629
#SPJ1
The Atwood’s machine shown consists of two blocks of mass m1 and m2 that are connected by a light string that passes over a pulley of negligible friction and negligible mass. The block of mass m1 is a distance h1 above the ground, and the block of mass m2 is a distance h2 above the ground. m2 is larger than m1. The two-block system is released from rest. Which of the following claims correctly describes the outcome after the blocks are released from rest but before the block of m2 reaches the ground?
When the two-block Atwood's machine system is released from rest, the block of mass m1 accelerates downwards due to the force of gravity and the block of mass m2 accelerates upwards. This is because the mass of m2 is greater than the mass of m1, meaning m2 is the heavier object and thus the object that accelerates upwards. This is a result of Newton's Third Law of Motion, which states that for every action there is an equal and opposite reaction. As the block of m2 accelerates upwards, the block of m1 accelerates downwards, allowing the two blocks to move in opposite directions.
In addition, the acceleration of the two blocks is determined by the difference in masses, with the larger mass (m2) having the smaller acceleration. This is due to Newton's Second Law of Motion, which states that the acceleration of an object is equal to the force acting on it divided by its mass. As m2 has the larger mass, it has a smaller acceleration.
Before the block of m2 reaches the ground, the acceleration of both blocks will be constant. This is because there is no friction between the two blocks, meaning the force acting on them will remain constant. The two blocks will continue to move in opposite directions, and the heavier mass will continue to accelerate at a slower rate than the lighter mass.
In conclusion, when the Atwood's machine is released from rest but before the block of mass m2 reaches the ground, the two blocks will move in opposite directions with constant acceleration. The larger mass will have the smaller acceleration due to Newton's Second Law of Motion.
For more such questions on Newton's Third Law of Motion
https://brainly.com/question/1657470
#SPJ11
Measurements are described as
they are very similar to each other. What word
completes the sentence?
Answer:
Precise
Explanation:
Or Precise Measurements
Measurements are described as precise they are very similar to each other.
What is meant by measurement ?Measurement is defined as the process of comparison of a physical quantity to a reference quantity.
Here,
We can determine a material's characteristic by measuring a physical quantity. We are able to measure weight, mass, and other physical attributes including velocity, momentum, energy, and other dimensions of space and time.
In order to compare a physical quantity to a unit, we need measurement.
A unit of measurement is a specific magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind. It is determined by convention or regulation. Any additional amount of that type can be stated as a multiple of the measurement.
Hence,
Measurements are described as precise they are very similar to each other.
To learn more about measurement, click:
https://brainly.com/question/12629581
#SPJ2
A student puts a piece of black paper and a piece of white paper in the same sunny spot. After 30 minutes, she observes that the black paper feels warmer than the white paper. Which best explains the student’s observation?(1 point)
The black paper reflects more waves from the sun than the white paper.
The black paper prevents waves from the sun from reaching the white paper.
The black paper receives stronger waves from the sun than the white paper.
The black paper absorbs more waves from the sun than the white paper.
Answer:
The black paper absorbs more waves from the sun than the white paper.
Explanation:
Black absorbs all colours, whereas other colours reflect some visible light, which causes it to absorb more energy and become hotter. Black items heat up more quickly in sunlight because they absorb radiation rather than reflect it, which is why they appear black.
A 0.0450-kg golf ball initially at rest isgiven a speed of 25.0 m/s when a club strikes. If the cluband ball are in contact for 2.00 ms, what average force acts on theball? Is the effect of the ball's weight during the time ofcontact significant? Why or why not?
The average force that acts on the ball of 0.0450-kg which is initially at rest and then is given a speed of 25.0 m/s when a club strikes, is 562.5 N.
Mass of golf ball, m = 0.0450 kg
Initial velocity, u = 0 m/s
Final velocity, v = 25.0 m/s
Time of contact, t = 2.00 ms = 2 × 10⁻³s
Acceleration of the ball, 'a' can be calculated using the kinematic equation:
v = u + at
a = (v-u)/t
a = (25.0 - 0)/(2 × 10⁻³) m/s²
a = 12500 m/s²
The average force acting on the ball, F can be calculated using the equation,
F = ma= (0.0450) × (12500) N= 562.5 N
Thus, the average force acting on the ball is 562.5 N.
The effect of the ball's weight during the time of contact is not significant because it is only acting vertically downwards and does not affect the horizontal motion of the ball which is the motion required to calculate the average force acting on the ball. Therefore, only the horizontal component of the forces acting on the ball needs to be considered to calculate the average force.
In conclusion, the average force is 562.5 N and the effect of the ball's weight is not significant.
To know more about average force, refer here:
https://brainly.com/question/29781083#
#SPJ11
basic behavior: according to your data, does this resistance increase or decrease with voltage? a reasonable (and correct) thought is that the impact is really with temperature, as the light bulb heats up with more power going into it. how does your data imply resistance varies with temperature?
Based on the given question, the resistance will: increase with the increase in voltage.
The reason behind this is that resistance and voltage have a direct relationship. As the voltage increases, the resistance also increases. This can be explained by Ohm’s Law which states that V= IR where V is voltage, I is current and R is resistance. As per the second part of the question, it is implied that the resistance varies with temperature.
The resistance of any material depends upon temperature, and a rise in temperature increases the resistance of the material. The light bulb acts as a resistor, and its resistance will increase as the temperature increases due to an increase in the temperature of the filament of the bulb.
The resistance is directly proportional to the temperature of the bulb, and it is represented by the equation
R = R₀ (1 + αt),
where R is resistance, R₀ is the resistance at a particular temperature, α is the temperature coefficient of resistance, and t is the temperature difference in Celsius.
Therefore, based on the data provided, it can be concluded that resistance increases with the increase in temperature which results in the heating of the light bulb, which is a resistor.
To know more about resistance refer here:
https://brainly.com/question/29427458#
#SPJ11
When you hear the sound from a vehicle that is moving toward you, the pitch is higher than it would be if the vehicle were stationary. The pitch sounds higher because the
a. sound waves arrive more frequently
b. sound from the approaching vehicle travels faster
c. wavelength of the sound waves becomes greater
d. amplitude of the sound waves increases
Option (A) "sound waves arrive more frequently" is the correct answer. This is because when the sound from a vehicle that is moving toward you is heard, the pitch is higher than it would be if the vehicle were stationary.
What is pitch?Pitch is defined as the highness or lowness of a sound. In other words, pitch is a perception of the frequency of a sound. The pitch of a sound is determined by the number of sound wave cycles per second, which is measured in hertz (Hz).
What are sound waves?Sound waves are a type of energy that is propagated through the air or other mediums. Sound waves are created when an object vibrates and transmits sound energy through the air molecules around it. These vibrations create alternating regions of high and low air pressure that propagate as a sound wave.
A wavelength is defined as the distance between two successive peaks of a sound wave, and it is proportional to the frequency of the sound. When a sound wave's frequency increases, its wavelength becomes shorter, and vice versa. Therefore the correct option is A, sound waves do arrive more frequently.
To know more about the sound wave, click the link: brainly.com/question/1417453
#SPJ11
1. A glass tube filled with water is at rest on a table. Rank the pressures at points Q, R, S, T, and U from largest to smallest. Explain your reasoning. 2. A U-shaped tube (height -0.5 meter) is partly filled with water, as shown at right. The right end of the tube is closed at the top, but the left end is open to the atmosphere. There is no air between the rubber stopper and the water surface on the right-hand side. a. Rank the pressures at points W, X, Y, and Z. Explain the reasoning you used to rank the pressures. b. Is the pressure at point Z greater than, less than or equal to atmospheric pressure? Explain. No A syringe is used to remove water from the left-hand side such that the level on the left drops to point W. (Note that the water level on the right side is not shown.) no Will the water level on the right-hand side stay at point Zor drop to a point below point Z? Explain.
The atmospheric pressure will be the same at every point. Therefore, they will all have the same pressure.
The atmospheric pressure will be the same at every point. Therefore, they will all have the same pressure. Q, R, S, T, and U all have the same pressure.
The pressure at point X is greater than the pressure at points Y, Z, and W. Point W has the least pressure. Point Z has greater pressure than W but lesser than Y. Y has greater pressure than Z but less than X.
The pressure at point Z is equal to the atmospheric pressure. The atmospheric pressure acts on the open end of the tube that's why the pressure at point Z is equal to the atmospheric pressure. The pressure at point Z is in balance with the atmospheric pressure.The water level on the right-hand side will drop to a point below point Z. When water is removed from the left side, the pressure on the right side will be greater than the pressure on the left side.
So, the water will start to move towards the right side until the pressure in the left and right sides is the same again. When it is in balance, the water level on the right side will stay below point Z.
Learn more about preasure: brainly.com/question/24719118
#SPJ11
a small 1.25 kg ball on the end of a light rod is rotated in a horizontal circle of radius 1.2 m. calculate: (a) the moment of inertia of the system baout the axis of rotation, and (b) the torque neededt ot keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 n on the ball
The torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball is 0.024 N.m.
A small 1.25 kg ball on the end of a light rod is rotated in a horizontal circle of radius 1.2 m.
The moment of inertia of the system about the axis of rotation and the torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball can be calculated as follows:
Part (a)The moment of inertia, I of a solid ball is given by I = 2/5mr².
Here, m is the mass of the ball, and r is the radius of the ball.
We have to find the moment of inertia of the system about the axis of rotation.
Since the axis of rotation passes through the center of the ball, the moment of inertia of the ball is given by Iball = 2/5mr².
Thus, the moment of inertia of the system about the axis of rotation is given by I = Iball + mR²I = 2/5mr² + mR²I = m(2/5r² + R²)I = 1.25(2/5(0.06)² + (1.2)²)I = 0.026 kg.m²
Part (b)The torque required to keep the ball rotating at constant angular velocity can be calculated as follows:
τ = Iα
Here, τ is the torque,
I is the moment of inertia of the system, and
α is the angular acceleration.
At constant angular velocity, α = 0.
Since air resistance exerts a force of 0.02 N on the ball, the torque required to keep the ball rotating at constant angular velocity is
τ = Frτ = F × Rτ = 0.02 × 1.2τ = 0.024 N.m
Therefore, the torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball is 0.024 N.m.
To know more about torque here
https://brainly.com/question/25708791
#SPJ11
for our ohm's law plot, what goes on each axis to get a slope equal to exactly the equivalent resistance? note: the lab manual instructs us to make a plot of inverse resistance (1/r), is that the best plotting method?
Y-axis = _____
X-axis = _____
For the ohm's law plot, the equivalent resistance can be obtained by plotting the current versus the voltage.
However, to get a slope that is equal to the equivalent resistance, we can make a plot of inverse resistance (1/r).
Y-axis = 1/R (Inverse Resistance)X-axis = Current (I)According to the lab manual, we can use the plot of inverse resistance (1/r) to determine the equivalent resistance. This method is best for plotting because it makes it easy to get a slope that is equal to the equivalent resistance. For example, if we have resistance R1, R2, and R3 connected in parallel, the equivalent resistance can be found as follows:
1/Req = 1/R1 + 1/R2 + 1/R3Therefore, if we plot 1/R versus the current, the slope of the line will be equal to the equivalent resistance.
Learn more about ohm's law at brainly.com/question/1247379
#SPJ11
A wave interaction that occurs when two waves are in the same place at the same time
The wave interaction that occurs when two waves are in the same place at the same time is called interference.
Interference can be either constructive or destructive, depending on the relative phases of the waves.
What is constructive interference?
Constructive interference occurs when two waves have the same phase and their amplitudes add together. The resulting wave has a larger amplitude than either of the individual waves. This can be seen, for example, when two speakers playing the same sound are placed close together.
What is destructive interference?
Destructive interference occurs when two waves have opposite phases and their amplitudes subtract from each other. The resulting wave has a smaller amplitude than either of the individual waves. This can be seen, for example, when two waves with equal amplitude and wavelength are superimposed, but one is shifted by half a wavelength relative to the other.
To know more about interference, visit:
https://brainly.com/question/16098226
#SPJ1
Complete question is: The wave interaction that occurs when two waves are in the same place at the same time is called interference.
How to find heat capacity of calorimeter with hot and cold water?
This can be done using the formula:
heat capacity = (mass of hot water x specific heat capacity of hot water) + (mass of cold water x specific heat capacity of cold water) – (mass of calorimeter x temperature change).
The heat capacity of a calorimeter can be found using a hot and cold water method. To begin, you will need a calorimeter (such as a coffee cup calorimeter), a hot water source, a cold water source, a thermometer, and a timer. Start by measuring the temperature of the hot water and the cold water, then fill the calorimeter half full with the hot water and half full with the cold water.
Place the thermometer in the calorimeter and wait for a few minutes to ensure that the temperature of the water in the calorimeter is stable. Once the temperature is stable, record the temperature and use it to calculate the heat capacity of the calorimeter.
for such more questions on calorimeter
https://brainly.com/question/29137009
#SPJ11
the surface of the sun appears sharp in visible light because
"The surface of the sun appears sharp in visible light because the photosphere is thin compared to the other layers in the sun."
Most of the electromagnetic energy that reaches the earth begins in the photosphere, the area of the sun that is visible to us. The photosphere is referred to as the sun's surface, despite the fact that it is a gaseous entity.
The gas in the photosphere appears to have a sharp surface, but in reality, it is heavier lower in the Sun and less dense higher up. It is more transparent the less thick it is. The area of the gas that is visible to us is where it has largely become translucent. About 300 km of this layer are deep.
The photosphere is the line separating the core of the Sun from its atmosphere. It is the part of the Sun's surface that is visible to us. The photosphere is not like a planet's surface; even if you could stand in the sun, you couldn't do so on the photosphere.
To know more about Sun:
https://brainly.com/question/12498469
#SPJ4
A bowling ball with a mass of 8kg strikes a pin that is at rest and has a mass of 2. The pin flies forward with a velocity of 8m/s and the ball continues forward at 2 m/s. What was the original velocity of the ball?
The required original velocity of the bowling ball is calculated to be 6 m/s.
The total momentum prior to and following a collision are identical in a closed system.
From the principle of conservation of momentum,
M × U + m × u = M × V + m × v ----(1)
Where,
M = Mass of the bowling ball (M = 8 kg)
m = Mass of the pin (m = 2 kg)
U = Initially, the bowling ball's speed
u = Initial velocity of the pin (u = 0 m/s)
V = Final velocity of the bowling ball (V = 2 m/s)
v = Final velocity of the pin (v = 8 m/s)
Substitute these values in (1) and to solve U:
8(U)+2(0) = 8(4)+2(8)
8U = 32 + 16
8U = 48
U = 6 m/s
Thus, the initial velocity of the bowling ball is calculated to be 6 m/s.
To know more about velocity:
https://brainly.com/question/19589618
#SPJ4