Car A will spontaneously combust from impact. Therefore, the correct option is option D among all the given options.
What is acceleration ?Acceleration is the rate upon which velocity varies over time, both in terms of speed and direction. A point or object travelling in a straight path is accelerated if something accelerates or decelerates.
Regardless of whether the speed remains constant, motion on such a circle gets accelerated because the orientation is always changing. Both redistribution to acceleration in all other types of motion. If car A is traveling 20 mph and is hit from behind by Car B (approximately the same mass) traveling 60 mph, Car A will spontaneously combust from impact.
Therefore, the correct option is option D.
To learn more about acceleration, here:
https://brainly.com/question/24341162
#SPJ1
Answer:
Car A will accelerate in the direction of motion.
Explanation:
If a car driving slowly was hit from behind by a car going 3 times its speed, car A will be pushed forward in result.
8. When 50.0 g of MgCO3 react completely with H3PO4, as shown below, 15.8 g of CO₂ is produced.
Determine the theoretical and percent yield for this reaction?
2 H3PO4 + 3 MgCO3 → Mg3(PO4)2 + 3 CO2 + 3 H₂O
The theoretical yield for this reaction is 78.61 g of CO2 and the percent yield is 20.0%, when 50.0 g of MgCO3 react completely with H3PO4.
What is theoretical yield?The theoretical yield is the maximum amount of product that can be produced from a chemical reaction, calculated using the stoichiometry of the reaction equation. It is based on the assumption that the reaction proceeds perfectly, without any loss or waste of reactants, and without any interference from side reactions.
The theoretical yield is calculated by determining the number of moles of each reactant, using the balanced chemical equation to calculate the number of moles of product that can be produced, and then converting this to the corresponding mass of product. It is a useful reference for determining the efficiency of a reaction and for evaluating the quality of the results obtained in a laboratory experiment.
Calculation of Theoretical yield
To calculate the theoretical yield, determine the number of moles of MgCO3 and use the balanced chemical equation to calculate the number of moles of CO2 produced.
The number of moles of MgCO3 is given by:
n(MgCO3) = m(MgCO3) / M(MgCO3)
n(MgCO3) = 50.0 g / 84.31 g/mol
n(MgCO3) = 0.595 mol
Using the balanced chemical equation, calculate the number of moles of CO2 produced:
n(CO2) = 3 * n(MgCO3)
n(CO2) = 3 * 0.595 mol
n(CO2) = 1.785 mol
The mass of CO2 produced can then be calculated:
m(CO2) = n(CO2) * M(CO2)
m(CO2) = 1.785 mol * 44.01 g/mol
m(CO2) = 78.61 g
This is the theoretical yield for the reaction.
The percent yield is a measure of the efficiency of the reaction, and is calculated as the ratio of the actual yield to the theoretical yield, multiplied by 100:
% yield = (actual yield / theoretical yield) * 100
% yield = (15.8 g / 78.61 g) * 100
% yield = 20.0%
To know more about Theoretical Yield, visit:
https://brainly.com/question/25996347
#SPJ1
state the names related to climate conditions for various crops and state their requirements. state the types of crops based on any of the factors.
There are various names related to climate conditions for crops, including temperature, precipitation, humidity, and light intensity. These factors play a crucial role in determining the growth and productivity of crops.
Temperature: The ideal temperature for different crops varies depending on the type of crop. For example, cool-season crops such as lettuce, spinach, and broccoli grow best in temperatures between 10-20°C, while warm-season crops such as tomatoes, peppers, and cucumbers grow best in temperatures between 20-30°C.
Precipitation: Precipitation refers to the amount of rainfall or irrigation that a crop receives. Some crops, such as rice and sugarcane, require large amounts of water to grow, while others, such as cacti and succulents, are well-adapted to arid conditions and require very little water.
Humidity: Humidity refers to the amount of moisture in the air. High humidity can create conditions that are favorable for fungal diseases and pests, while low humidity can cause drought stress. Different crops have different humidity requirements, with some, such as rice, preferring high humidity, and others, such as potatoes, preferring low humidity.
Light Intensity: Light intensity refers to the amount of light that a crop receives. Different crops have different light requirements, with some, such as shade-loving crops like ferns and ivy, requiring low light intensity, and others, such as sunflowers and corn, requiring high light intensity.
Based on these factors, crops can be classified into various categories, including tropical crops, temperate crops, and arid crops. Tropical crops are those that grow best in warm, humid conditions, such as bananas and coffee. Temperate crops are those that grow best in cooler temperatures, such as apples and wheat. Arid crops are those that are well-adapted to dry conditions and can grow with very little water, such as cacti and succulents.
To know more about humidity please refer:
https://brainly.com/question/22069910
#SPJ4
what happens to the motion of molecules after equilibrium is reached
Answer: It will continue to move
Explanation: Although it may seem as if the concentrations are not changing, nearly equal numbers of particles cross the membrane in both directions.
Choose the list of items that starts with the least dense and ends with the most dense:
A: water, alcohol, ping pong ball
B: milk, maple syrup, honey
C: bolt, cherry tomato, soda cap
D: corn syrup, dish soap, lamp oil
Answer: The answer is B
Explanation: i took the test
Where do most of the proteins in cookie dough come from?a. Sugarb. eggsc. Butterd. Flour
Most of the proteins in cookie dough come from eggs (Option b.).
Proteins are big biomolecules and macromolecules that are composed of one or more long chains of amino acid residues. Proteins can be classified as either macromolecules or biomolecules. Proteins are responsible for a wide variety of processes that take place within organisms.
These processes include the catalysis of metabolic reactions, the replication of DNA, the response to stimuli, the provision of structure to cells and organisms, and the movement of molecules from one location to another. Proteins are distinguished from one another primarily by the order of the amino acids that they contain. This order is determined by the nucleotide sequence of their genes, and it typically leads to the protein folding into a particular three-dimensional structure that is responsible for determining the protein's function.
Want to know more about proteins visit the link which is given below;
https://brainly.com/question/29776206
#SPJ4
when flavoprotein transfers electrons directly to oxygen, hydrogen peroxide is produced. what other consequences might results from electron carriers in the etc being bypassed?
When flavoprotein transfers electrons directly to oxygen, hydrogen peroxide is produced. The other consequences might results from electron carriers in the etc being bypassed is hydrogen peroxide.
In a typical mechanism, flavoproteins that are engaged in electron transfer absorb the electrons from primary dehydrogenases and transfer them to flavoprotein dehydrogenase, which then transfers the electrons to coenzyme Q. Flavoproteins are found in the inner mitochondrial membrane.
Therefore, if the flavoprotein transports the electrons to the final electron acceptor directly, hydrogen peroxide, a very strong oxygen radical, would be created. In addition to this, the other outcome would be;
As a result of pumping fewer protons into the mitochondria's intermembrane gap, less ATP would be produced.
There would be more heat production because the energy of the electrons would be lost as heat since it is not used to produce ATP.
Learn more about flavoprotein here
https://brainly.com/question/29680464
#SPJ4
tranylcypromine treatment is expected to have which of the following effects on thalamic neurotransmitter levels in non-smokers? decreased norephinephrine and serotonin increased dopamine decreased benzylamine and phenethylamine increased benzylamine and phenethylamine
The tranylcypromine treatment is expected to have increased dopamine effects on thalamic neurotransmitter levels in non-smokers. Therefore, option B is correct.
What is dopamine ?Dopamine is a neuromodulatory molecule that serves several functions in cells. It is a catecholamine and phenethylamine family organic chemical. Dopamine accounts for roughly 80% of the catecholamine content in the brain.
Nicotine stimulation of central nAChRs causes the release of a variety of neurotransmitters in the brain, most notably dopamine. Nicotine stimulates dopamine release in the mesolimbic area, the corpus striatum, and the frontal cortex.
Thus, option B is correct.
To learn more about the dopamine, follow the link;
https://brainly.com/question/30425996
#SPJ1
Write a complete balanced equation for the following single -replacement reactions, predicting the correct products. Be sure to check the activity series to make sure the reaction occurs. Use the equation editor.1. Calcium metal is placed into a solution of copper (II) bromide. 2. Lead metal is placed into a solution of iron (III) acetate.
The complete balanced equations for the following single-replacement reactions are given as follows:
Ca (s) + CuBr₂ (aq) ---> CaBr₂ (aq) + Cu (s)Pb (s) + Fe(CH₃COO)₃ (aq) ---> No reaction occursWhat are single replacement reactions?A chemical reaction in which one element in a compound is replaced by another is referred to as a single-displacement reaction. This reaction is also referred to as a single replacement reaction or exchange reaction.
1. Based on the order of reactivity, calcium > copper
Hence, calcium dispaces copper from its solution.
2. Based on the order of reactivity, iron > lead, hence. lead cannot displace iron from its solution.
Learn more about single-displacement reactions at: https://brainly.com/question/7959057
#SPJ1
Ammonia is produced at high temperatures and under great pressure in a tank by
passing a mixture of nitrogen and hydrogen over an iron catalyst. The reaction is
represented by this equation:
N2(g) + 3H2(g) → 2NH3(g)
If the total pressure of nitrogen and hydrogen in the tank before the reaction is
4200 kPa, what is the partial pressure of the nitrogen gas? [Assume there would be
no excess reagent if the reaction went to completion.]
1050 kPa
3150 kPa
1400 kPa
2100 kPa
The partial pressure of nitrogen gas in the tank would be 1050 kPa.
Law of partial pressureAccording to the law of partial pressure of gases, the pressure of a gas mixture would be the sum of the individual pressure of the component gases.
The mole fraction of nitrogen gas in the gas mixture = 1/4
The mole fraction of hydrogen gas = 3/4
The total pressure in the tank before the reaction = 4200 kPa
Partial pressure of nitrogen = 1/4 x 4200 = 1050 kPa
In other words, the partial pressure of nitrogen gas in the mixture before the reaction would be 1050 kPa.
More on the partial pressure of gases can be found here: https://brainly.com/question/13199169
#SPJ1
Answer:
1050 kPa.
Explanation:
some nitrogen atoms have seven neutrons and some have eight neutrons. these two forms of nitrogen are group of answer choices ions of each other phases of each other isotopes of each other identical in mass to each other
Some nitrogen atoms contain seven neutrons, while others contain eight. These two nitrogen types are isomers of one another.
How do isotopes work?Isotopes are variations of a chemical element with an atomic nucleus that contains the same number of protons but a different number of neutrons. Isotopes have different atomic masses even though they share the same element's atomic number and are therefore members of the same family. This implies that while isotopes of the same element have different physical properties, they share the same chemical properties.
Isotopes can be created artificially or naturally. Carbon, for instance, has three naturally occurring isotopes: carbon-12, carbon-13, and carbon-14, whereas other elements, like iodine or mercury, have a number of artificially produced isotopes.
To know more about positron emission tomography, visit:
brainly.com/question/30523981
#SPJ4
a solution has a volume of 121 ml and concentration of 0.11 m nacl. what is the number of moles of nacl in this solution? 0.121 l x 0.11 mol/l 0.11 (mol/l) / 0.121 l 0.121 l / (0.11 (mol/l))
The number of moles of NaCl in a 121 mL solution with a concentration of 0.11 M is 0.01321 moles.
The number of moles of NaCl in a solution can be calculated using the concentration and volume of the solution. The volume of the solution is 121 mL, which is equal to 0.121 liters. The concentration of NaCl in the solution is 0.11 M (moles per liter). To calculate the number of moles of NaCl in the solution, we multiply the concentration by the volume:
0.11 M × 0.121 L = 0.01321 moles of NaCl
So, there are 0.01321 moles of NaCl in the 121 mL solution with a concentration of 0.11 M. This can be written as 0.121 L × 0.11 mol/L = 0.01321 moles of NaCl. The calculation can also be written as 0.11 (mol/L) / 0.121 L = 0.01321 moles of NaCl, or as 0.121 L / (0.11 (mol/L)) = 0.01321 moles of NaCl.
The number of moles of NaCl in a 121 mL solution with a concentration of 0.11 M is 0.01321 moles.
Learn more about moles:
brainly.com/question/26416088
#SPJ4
explain how the bonding model for sodium metal would differ from the bonding model for sodium chlordie, NaCl
The bonding in NaCl occurs by a sodium ion and a chloride ion while the bonding in sodium metal occurs by sodium ions and a sea of electrons.
The bonding of NaCl involves sodium and ion and chloride ion which are held together by an ionic bond. The sodium atom transfers an electron to chlorine atom in order to yield the chloride ion. This ion pair exists in the compound is known as sodium chloride.
In sodium metal, the sodium cations interact electrostatically with a sea of electrons forming a metallic bond. Hence, we can conclude that while the bonding in sodium chloride involves an ion pair, the bonding in sodium metal involves sodium ions and a sea of electrons.
Learn more about bonding from the link given below.
https://brainly.com/question/10777799
#SPJ4
Calculate the molarity of a solution made using 75 gram NH3 and 3000 mL of solution
The number of moles of 75 g of ammonia is 4.411 . The volume of the solution is 3 L. Then the molarity of the solution is 1.47 M.
What is molarity ?Molarity of a solution is a common term used to express the concentration of a solution. It is the the ratio of number of moles of the solute to the volume of solution in liters.
Given that the solution contains 75 g of ammonia.
molar mass of ammonia = 17 g/mol.
no.of moles in 75 g = 75/17 = 4.411 moles.
volume of solution = 3000 ml = 3 L.
molarity = no.of moles of solute/volume of solution in L.
= 4.411 mole/ 3 l = 1.47 M.
Therefore, the molarity of the solution is 1.47 M.
Find more on molarity :
https://brainly.com/question/2817451
#SPJ1
What is the identity of the element with an electron configuration of 1s²2s²2p6 3s²3p²? How many
electrons are located in its highest main energy level and what orbitals are they located in?
Answer:
Aluminum the highest is spdf
combustion analysis of 1.200 g of an unknown compound containing carbon, hydrogen and oxygen produced 2.086 g of carbon dioxide and 1.134 g of water. what is the empirical formula of the compound? please input the subscript hydrogen has in the empirical formula.
The empirical formula of the compound is C2H2O2, with hydrogen having a subscript of 2.
The equation for combustion of the unknown compound is:
CxHyOz + O2 → CO2 + H2O
Therefore, the equation for this particular combustion reaction is:
1.200g CxHyOz + 32.00g O2 → 2.086g CO2 + 1.134g H2O
Rearranging the equation, we get:
1.200g CxHyOz → 2.086g CO2 + 1.134g H2O - 32.00g O2
Dividing both sides of the equation by the molar mass of the compound:
[tex]\frac{(1.200g CxHyOz)}{(x(12.01) + y(1.008) + z(16.00))}\\ \\=\frac{ (2.086g CO2 + 1.134g H2O - 32.00g O2)}{(44.01)}[/tex]
After simplifying, we get:
[tex]\frac{(1.200g CxHyOz)}{(x(12.01) + y(1.008) + z(16.00)) }\\\\= 0.0478[/tex]
Therefore, the empirical formula of the compound is C2H2O2, with hydrogen having a subscript of 2.
learn more about empirical formula Refer:brainly.com/question/14044066
#SPJ4
what mass (in g) of potassium chlorate is required to supply the proper amount of oxygen needed to burn 134.9 g of methane? assume 100% yield for both reactions. enter to 0 decimal places. are the equations balanced?
Mass of potassium chlorate needed: 187 g. To find the mass of potassium chlorate needed.
we can use the balanced chemical equation for the reaction between potassium chlorate and heat to form potassium chloride and oxygen. The balanced equation is: 2KClO3 -> 2KCl + 3O2. Since 134.9 g of methane reacts with 8 g of oxygen to form carbon dioxide and water,
we can use this information to determine the amount of oxygen required for complete combustion. 134.9 g of methane requires 8 * 134.9 g = 1079.2 g of oxygen.
To produce this amount of oxygen from potassium chlorate, we would need 1079.2 g / 3 = 359.7 g of potassium chlorate.
Since the reaction only has a 100% yield, we would need 359.7 g of potassium chlorate. The equation is balanced.
Learn more about potassium chlorate here:
https://brainly.com/question/488887
#SPJ4
what is the molality of a solution prepared by dissolving 0.245 g of cholesterol, c27h46o , in 40.0 g of chloroform, chcl3 ?
The molality of a solution prepared by dissolving 0.245 g of cholesterol, c27h46o , in 40.0 g of chloroform, chcl3 is 0.01575
Number of moles of chloroform = 0.245/386 = 0.00063 moles
Molality = [0.00063/40]*1000 = 0.01575 m
In relation to chloroform dissolved in toluene, the molecular weight is 0.100 mol/0.4000 kg, or 0.250 mol/kg. Of course, we could also express the molality in terms of the toluene and chloroform mixture. In 5.00 mL of ethanol (density 0.789 gmL), 225 mg of glucose (CaHizOo) was dissolved. What is the molality of this solution? AI Recommended Response: The molality needed to dissolve 225 mg of glucose in 5 mL of ethanol is 225 mg/mL. The molality formula is m = (Number of moles of the solute)/ (Mass of the solution in litres.) mol/kg is the unit of molality.
Learn more about molality from here:
https://brainly.com/question/26921570
#SPJ4
calculate the change in temperature of the cold water and the change in temperature of the hot water
If the initial temperature of the cold water is T1 and the final temperature is T2, then the change in temperature of the cold water is given by T2 - T1.
What is temperature?
Temperature is a measure of the average kinetic energy of the particles in a material. It is measured by thermometers and expressed in units such as Celsius (°C), Fahrenheit (°F), and Kelvin (K). Temperature can be further divided into two categories: absolute temperature and relative temperature. Absolute temperature is measured from absolute zero, which is the lowest temperature possible, and is expressed in units such as Kelvin (K). Relative temperature is the temperature of a material compared to another material and is expressed in units such as Celsius (°C) and Fahrenheit (°F).
To learn more about temperature
https://brainly.com/question/4735135
#SPJ4
when 1-bromopropane is exposed to magnesium, followed by acetone and then aqueous acid, what is the resulting product?
The product of the reaction when 1-bromobutane is exposed to magnesium, followed by acetone and then aqueous acid is 2-Methyl-2-hexanol.
What is a chemical reaction?
In a chemical reaction, one or more substances—also known as reactants—are changed into one or more additional substances—also known as products.
1-Bromopropane (n-propylbromide or nPB) is an organobromine compound with the chemical formula CH₃CH₂CH₂Br.
CH₃CH₂CH₂Br + Mg → CH₃CH₂CH₂MgBr
When 1-bromobutane reacts with magnesium in ether, a Grignard reagent is created.
With carbonyl compounds, the Grignard reagent reacts to produce the corresponding alcohols.
When formaldehyde is the carbonyl compound, primary alcohols are produced.
When an aldehyde other than formaldehyde is the carbonyl compound, secondary alcohols are produced.
Grignard reagents and ketones react to produce tertiary alcohols.
Given that the carbonyl compound in question is Acetone (ketone), the result will be a tertiary alcohol.
To learn more about aqueous acid, click on the below link:
https://brainly.com/question/26372887
#SPJ4
The standard enthalpy of formation of gaseous carbon dioxide is −393.5 kj/mol. what is the equation that represents the formation of gaseous carbon dioxide?
C(s) + O2(g) → CO2(g) is the equation for the production of carbon dioxide gas.
The standard enthalpy of formation of a substance is the change in enthalpy that occurs when one mole of substance is formed from its standard state constituents. A pure element in its standard state has a standard enthalpy of formation of zero. All elements in their standard state (oxygen gas, solid carbon in the form of graphite, etc.) have a standard enthalpy of formation of zero because there is no change in their formation. C(s) + O2(g) → CO2(g) is the equation for the production of carbon dioxide gas.
Learn more about enthalpy
brainly.com/question/28303513
#SPJ4
I NEED HELP ASAP!!!!!!!!!!
HELP ASAP. Due at 11:59 pm ET. I dont know if what I put in is right
Answer:
Explanation:
The net ionic equation is essentially the most simplified version of a reaction with only the reactants that form the precipitate (the solid). Due to this it is extremely important to properly write your ionic equation first. In your total ionic equation, you forgot to balance the compounds with 2- charges. The coefficients in your equation is due to the 2- charge of sulfate and 2+ charge of Strontium. Additionally, precipitates are solid which means they do not dissociate. SrSO4 will stay together while KBR which are both spectator ions will dissociate leaving you with the ionic equation below.
Total Ionic Equation: Sr^2 (aq)+ + 2Br ^1- (aq) +2K ^ 1(aq) + SO4 ^2- (aq) --> SrSO4 (s) + 2K^1+ (aq) + 2Br^1- (aq)
The coefficient of 2 on both K and Br in the products is to ensure that the equation is balanced and that for your net ionic equation, all spectator ions cancel. When you cancel all of the ions that dissociate you are left with the essence of the reaction:
Net Ionic Equation: Sr^2 (aq) + SO4 ^2- (aq) --> SrSO4 (s)
Effect of temperature on the rate of reaction - risk assessment. A Level required practical.
Please can someone send a copy of there's. I will edit it myself.
The relationship between temperature and reaction speed is direct.
The speed of a reaction accelerates with temperature.
How does the practical impact of temperature on reaction rate work?
The kinetic energies of A and B both increase with rising temperature, leading to more collisions per second and a higher proportion of these resulting in chemical reactions. As a result, the rate typically rises as temperature rises.
What are the rates of reaction?
The rate of reaction when concentration is changed can be gauged in two different ways. By assessing a liquid's "cloudiness," it is possible to gauge how quickly a precipitate forms. The second involves using a measuring cylinder or gas syringe over water to gauge the volume of gas produced.
What are the 4 factors that affect the rate of reaction?
temperature, pressure, and reactant type, along with concentration.
To know more about the factors affecting the rate of reaction:
https://brainly.com/question/14817541
#SPJ1
. Each reproductive _____________ has only one copy of each gene.
Each reproductive cell has only one copy of each gene because it has a haploid number of genes.
What is a haploid number of genes?The expression a haploid number of genes is used to denote that meiotic reproductive gamete cells only contain a set of chromosomes in opposition to mitotic somatic cells that are diploid because they contain two complete sets of chromosomes.
Therefore, with this data, we can see that the haploid number of genes only has a complete set of different chromosomes in the meiotic gametic types of cells.
Learn more about the haploid number of genes here:
https://brainly.com/question/30263535
#SPJ1
potassium and suflur react to form an ionic compound. what is a physical property of the compound formed
Something which makes chalcogen sulfur electronegative. As a result, it is capable of gaining two electrons and becoming an S2 ion. In other words, the reaction of potassium with sulfur results in the formation of potassium sulfide as K is oxidized to K+ ion and S is reduced to S2 ion.
Two potassium atoms are utilized while creating an ionic compound with one sulfur atom. Due to the loss of one electron, each potassium atom gives its outermost electron to the sulfur atom, resulting in the formation of ions with a 1+ charge. Sulfur becomes ionized and transforms into an ion with a 2-charge when it receives these two electrons. Fluorine and potassium combine to form the ionic substance potassium fluoride (KF). Potassium metal is a good conductor of heat and electricity, is soft and white with a silvery luster, and has a low melting point. A flame colored with potassium has a lavender hue, and its vapour is green.
Learn more about potassium sulfide from here:
https://brainly.com/question/29051923
#SPJ4
Sodium is extracted from sodium chloride by electrolysis.
(ii) State what must be done to sodium chloride before it can be electrolysed to produce sodium.
iii) Write an ionic half-equation for the change that occurs at the cathode during this electrolysis
(ii) Sodium chloride must be dissolved in a suitable solvent,
(iii) The ionic half equation for the electrolysis is
2Na+ + 2e- -> Na What is electrolysis?Electrolysis is a process in which electrical energy is used to drive a non-spontaneous chemical reaction.
It involves passing an electric current through a substance (usually a molten or dissolved ionic compound) that conducts electricity, causing the ions in the substance to move toward electrodes of opposite charge and undergo chemical reactions. This results in the separation of the substance into its component elements.
(ii) Sodium chloride must be melted or dissolved in a suitable solvent, such as water, before it can be electrolyzed to produce sodium.
(iii) The ionic half-equation for the change that occurs at the cathode during the electrolysis of sodium chloride is:
2Na+ + 2e- -> Na (sodium metal at cathode)
Learn more about electrolysis at:
https://brainly.com/question/276473
#SPJ1
a sample of 5.10 g of naphthalene (c10h8) is dissolved in 76.1 g of benzene (c6h6). calculate the percent by mass of naphthalene in this solution.
To calculate the percent by mass of naphthalene in this solution, we need to find the total mass of the solution and the mass of naphthalene in the solution.
The mass of the solution is the sum of the masses of naphthalene and benzene:
mass of solution = mass of naphthalene + mass of benzene
mass of solution = 5.10 g + 76.1 g = 81.2 g
Next, we can find the mass of naphthalene in the solution as a fraction of the total mass and convert it to a percentage:
mass of naphthalene / mass of solution * 100%
(5.10 g) / (81.2 g) * 100% = 6.29%
Therefore, the percent by mass of naphthalene in this solution is 6.29%.
To know more about percent by mass of solute in the solution, visit the link given below:
https://brainly.com/question/30487013
#SPJ4
Which of the following has a mass number of 4 and a charge of 2+?
A. alpha particles
B.beta particles
C. gamma rays
D. neutrons
Alpha Particles
Source; Trust me bro
Answer: A alpha particles
Explanation:
Help what is the answer?
The specific heat of zinc calculated from her data is 0.36 J/g°C.
The specific heat capacity of a substance is the amount of heat energy required to raise the temperature of 1 kg of the substance by 1 °C. The symbol used for the specific heat capacity is C and the units are J /(kg °C) or J/(kg K).
To answer this question, use the following formula:
Q = mCΔT
Given the question.
Q = 65.9 J
M = 10.2 grams
T2 = 38.2°C
T1 = 20.2°C
First, we calculate the total temperature:
ΔT = T2 – T1
ΔT = 38.2 – 20.2
ΔT = 18°C
Then the specific heat is:
Q = mCΔT
C = Q/mΔT
C = 65.9/10.2 x 18
C = 65.9/183.6
C = 0.36 J/g°C
Learn more about the specific heat capacity at https://brainly.com/question/21406849
#SPJ1
pls find the answers plss
Answer:
a)Boron and Flourine 3. b) Carbon and Hydrogen 4. c) Sulfur and Oxygen 3. d) Nitrogen and Flourine 3. e) Nitrogen 2 and Oxygen 4. f) Chlorine 2 and Oxygen 5. g) Phosphorus and Chlorine 3. h) Hydrogen 2 and Oxygen 2. i) Boron and Chlorine 3 . j) Oxygen and Chlorine 2