Answer:
You included no options however the elements with 6 Valence electrons are;
Oxygen ⇒ OSulfur ⇒ SSelenium ⇒ SeTellurium ⇒ TePolonium ⇒ Polivermorium ⇒ UuhValence electrons refer to the electrons an element has on its outermost shell. The number of these electrons determines the charge that an electron will carry as it seeks stability.
It also determines which group the element will be in in the Periodic table. Elements with 1 valence electron for instance will be in Group 1 and elements in Group 16 will have 6 valence electrons.
the elements least likely to form bonds are found in witch group?1
A. 15
B. 16
C. 17
D. 18
Answer:
D. 18
Explanation:
group 18 elements are called noble gases.
They have complete octet in their valance shell. Therefore, they are least likely to form bonds with other elements.
using a curling iron to curl your hair is
conduction
convection
radiation
Answer:
its Radiation
Explanation:
Because it transfers heat from a object to a less hot object in this case from a hot curling iron to your hair.
Many plants are poisonous because their stems and leaves contain oxalic acid, H2C2O4, or sodium oxalate, Na2C2O4. When ingested, these substances cause swelling of the respiratory tract and suffocation. A standard analysis for determining the amount of oxalate ion, C2O 2− 4 , in a sample is to precipitate this species as calcium oxalate, which is insoluble in water. Write the net ionic equation for the reaction between sodium oxalate and calcium chloride, CaCl2, in aqueous solution.
Answer:
Explanation:
Calcium chloride is a soluble salt which dissociates into calcium and chloride ions when dissolved in water.
CaCl₂(aq) ----> Ca²⁺(aq) + 2Cl⁻(aq)
Similarly, sodium oxalate when dissolved in water dissociates into sodium and oxalate ions.
Na₂CO₄(aq) ----> 2Na⁺(aq) + C₂O₄²⁻(aq)
However, in a double displacement reaction where the two solutions of the salts are mixed, the insoluble salt calcium oxalate is precipitated. The net ionic equation for the reaction is shown below:
Ca²⁺(aq) + C₂O₄²⁻(aq) ----> CaC₂O₄(s)
. What is the density of a block of plastic if the volume of the block is 5 cm and the mass is 17.2 g?
Answer:
The answer is 3.44 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 17.2 g
volume = 5 cm³
We have
[tex]density = \frac{17.2}{5} \\ [/tex]
We have the final answer as
3.44 g/cm³Hope this helps you
Which of the following is least like the others on the list?
a. Estrogen
b. Cholesterol
c. Glycogen
d. Triglyceride
Answer:
Glycogen
Explanation:
a,b,d are lipidic and glycogen is glucide
Which graph shows acceleration?
Graph A and B both show acceleration.
Graph B shows acceleration, but Graph A does not.
Neither graph shows acceleration. They both show velocity.
Graph A shows acceleration, but Graph B does not.
Answer:
graph a shows acceleration and b does not
Explanation:
the velocity increases in graph a, but stays constant in graph b
Answer:
graph a shows acceleration and b does not
Explanation:
Which of the following mixture can be separated by sedimentation?
A water and kerosene B. water and sand
C. water and sugar
D water and alcohol
How many grams are 4.78x10*21 atoms of aluminum?
Which statement best describes how an ionic bond forms?
which surface events are examples of weathering
Answer:Weathering Erosion & Deposition
Changes in shape, size, and texture of land-forms (i.e. mountains, riverbeds, and beaches)
Landslides.
Buildings, statues, and roads wearing away.
Soil formation.
Washes soil, pollutants, harmful sediments into waterways.
Causes metals to rust.
Reduces beaches, shorelines.
Delta formation.
Explanation:
What is the wavelength of an electromagnetic wave that travels at 3.0 x 10^8m/s and has a frequency of 5.43 x 10^-12Hz?
Answer:
frequency f = velocity of light (c)/wavelength
therefore, wavelength =
velocity of light /frequency
= 3 x 10^8/ 5.43 x 10^-12
= 0.552 x 10^20.
HOPE IT HELPS
what do borates do structurally that none of the other non silicates with anionic complexes do g
Answer:
Kindly check the explanation section.
Explanation:
The chemical compound known as Borates has the Molecular Formula: BO3^-3. It has the shape of a triangle but Borates can form multiples ones that is to say quadrangles. Also, as a result of the fact that the octect is not complete, Borates are used as lewis Acid.
The oxygen present in Borates is/are directly attached to the central atom that is Boron while in non silicates the oxygen(s) that may be present is not directly attached to the central atom.
Chemistry
H
D
G
A
S
F
F
F
G
Vv
F
F
F
F
F
Answer:
i think its f because my teacher have been talking about this
Explanation:
Answer:
f
Explanation:
Calculate the energy of a wave given a frequency of
9.43 x 1011 Hz.
Answer:
The answer is
[tex]4.92 \times {10}^{ - 22} \: J[/tex]
Explanation:
In order to find the energy of the wave we use the formula
e = hfwhere
e is the energy
f is the frequency
h is the Planck's constant which is
6.626 × 10-³⁴ Js
From the question
f = 9.43 × 10¹¹ Hz
We have
[tex]e = 9.43 \times {10}^{11} \times 6.626 \times {10}^{ - 34} \\ [/tex]
We have the final answer as
[tex]4.92 \times {10}^{ - 22} \:J[/tex]
Hope this helps you
1) Consider the dissolution of CaCO3 compound in aqueous medium.
a) Write down the equation of the chemical reaction that represents this dissolution.
b) Write the expression of the equilibrium constant for this reaction.
c) Explain how the addition of a certain amount of sodium carbonate to
water would affect this balance
2) The equilibrium constant for the reaction 2 SO2(g) + O2(g) 2 SO3(g) has a Kc value = 2.5x10^10 to 500 K. Find the kc value for each of the following reactions at the same temperature
(a) SO2(g) +1/2 O2 SO3(g).
(b) SO3(g) SO2(g)+1/2 O2(g)
(c) 3SO3(g)+ 3/2 O2(g) 3SO3(g)
3) A reaction mixture consisting of 0.400 mol H 2 and 1.60 mol I 2 was prepared in a 3.00 L flask and heated. In balance, 60.0% of the hydrogen gas reacted. What is the equilibrium constant for the reaction H 2(g) + I 2(g) 2 HI(g) at this temperature?
Explanation:
1a) CaCO₃(s) → Ca²⁺(aq) + CO₃²⁻(aq)
1b) Remember, solids are not included in the equilibrium equation.
K = [Ca²⁺] [CO₃²⁻]
1c) Adding CO₃²⁻ ions will shift the reaction to the left, producing CaCO₃(s) until equilibrium is restored.
2) 2 SO₂(g) + O₂(g) → 2 SO₃(g)
Kc = 2.5×10¹⁰ = [SO₃]² / ([SO₂]² [O₂])
2a) SO₂(g) + ½ O₂(g) → SO₃(g)
Kc = [SO₃] / ([SO₂] [O₂]^½)
Kc² = [SO₃]² / ([SO₂]² [O₂])
Kc² = 2.5×10¹⁰
Kc ≈ 1.58×10⁵
2b) SO₃(g) → SO₂(g) + ½ O₂(g)
Kc = [SO₂] [O₂]^½ / [SO₃]
Kc = 1 / (1.58×10⁵)
Kc ≈ 6.33×10⁻⁶
2c) 3 SO₂(g) + ³/₂ O₂(g) → 3 SO₃(g)
Kc = [SO₃]³ / ([SO₂]³ [O₂]^³/₂)
Kc = ([SO₃] / ([SO₂] [O₂]^½))³
Kc = (1.58×10⁵)³
Kc ≈ 3.95×10¹⁵
3) H₂(g) + I₂(g) → 2 HI(g)
K = [HI]² / ([H₂] [I₂])
Make an ICE table.
[tex]\left[\begin{array}{cccc}&Initial&Change&Equilibrium\\H_{2}&0.400&-0.240&0.160\\I_{2}&1.60&-0.240&1.360\\HI&0&+0.480&0.480\end{array}\right][/tex]
K = (0.480)² / (0.160 × 1.360)
K = 1.06
Insoluble molecular compounds break apart into atoms when added to water.
True
O False
Answer:
False.
This is false because, no chemical reaction could possibly happen.
But in case of sodium it is highly reactive with water.......... so there will be a chemical reaction.
but as sodium is not a insoluble molecular compound this is not applicable to the situation.
a jaguar can run up to 50 miles per hour, how many feet can he run per second? give your answer in scientific notation to one and three significant figures.
Answer:
50x10^0
Explanation:
Convert 9.13 decigram into milligram
Answer:
(9.13)
multiply the mass value by 100
=913 milligrams
Answer:
913 mg
Explanation:
913
Give the net ionic equation for the reaction (if any) that occurs when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed.
Answer:
S²⁻(aq) + Cu²⁺(aq) ⇒ CuS(s)
Explanation:
Let's consider the molecular equation that occurs when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed.
Li₂S(aq) + Cu(NO₃)₂(aq) ⇒ 2 LiNO₃(aq) + CuS(s)
The complete ionic equation includes all the ions and the species that do not dissociate in water.
2 Li⁺(aq) + S²⁻(aq) + Cu²⁺(aq) + 2 NO₃⁻(aq) ⇒ 2 Li⁺(aq) + 2 NO₃⁻(aq) + CuS(s)
The net ionic equation includes only the ions that participate in the reaction and the species that do not dissociate in water.
S²⁻(aq) + Cu²⁺(aq) ⇒ CuS(s)
The net ionic equation includes only the ions that participate in the reaction and the species that do not dissociate in water.
S²⁻(aq) + Cu²⁺(aq) ⇒ CuS(s)
The molecular equation that occurs when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed.
Li₂S(aq) + Cu(NO₃)₂(aq) ⇒ 2 LiNO₃(aq) + CuS(s)
The complete ionic equation includes all the ions and the species that do not dissociate in water.
2 Li⁺(aq) + S²⁻(aq) + Cu²⁺(aq) + 2 NO₃⁻(aq) ⇒ 2 Li⁺(aq) + 2 NO₃⁻(aq) + CuS(s)
The net ionic equation includes only the ions that participate in the reaction and the species that do not dissociate in water.
S²⁻(aq) + Cu²⁺(aq) ⇒ CuS(s)
Thus, net ionic equation is S²⁻(aq) + Cu²⁺(aq) ⇒ CuS(s).
Learn more about ionic equation,here:
https://brainly.com/question/13887096
#SPJ6
The oxidation number that the Alkaline Earth Metals normally have when forming compounds is
Answer:
+2
Explanation:
All the alkaline earth metals have 2 valence electrons in their valence shell. Therefore, they lose 2 electrons to form cations with a +2 charge. For example, Mg²⁺.
Hope that helps.
Methylene Chloride (MC) is a common ingredient of paint removers. Besides being an irritant, it also may be absorbed through skin. When using this paint remover chemical protective clothing should be worn. If thick butyl rubber gloves (0.1 cm thick) are used, D in butyl rubber is 110 x 10-8 cm2/s, and surface concentrations are 0.44, and 0.02 g/cm3. If the surface of a glove is 50 cm2, the amount of MC transported through the glove in 3 hours will be: Answer in grams (g).
Answer:
2.5 g
Explanation:
First we have to calculate the diffusion flux (J). To calculate, we use the formula:
[tex]J=-D\frac{dC}{dx}=-D\frac{C_2-C_1}{x_2-x_1}\\ \\Given\ that:\\\\x_2-x_1=0.1\ cm,D=110*10^{-8}cm^2/s,C_2=0.02g/cm^3,C_1=0.44g/cm^3\\\\Substituting:\\\\J=-110*10^{-8}(\frac{0.02-0.44}{0.1} )=4.62*10^{-6}g/cm^2s\\\\But, J=\frac{M}{At}\\ \\t=3\ hours=10800\ s,A=50\ cm^2\\\\Substituting:\\\\4.62*10^{-6}=\frac{M}{50*10800}\\ \\M=4.62*10^{-6}*50*10800\\\\M=2.5\ g[/tex]
what is displacement give two examples
Explanation:
nothing it is just a question. you should know the answer . example:you,
The closeness of particles of gas and their low speeds allow intermolecular forces to become important at certain
pressures and temperatures. Which best describes this statement?
Answer:
This is a limitation of the kinetic-molecular theory.
Explanation:
Question 1 (5 points)
Calculate the frequency of a photon that exhibits a wavelength of 451 nm.
Equation: E = hu
h = 6.63 x 10-34]'s
Answer:
e
Explanation:
Which of these would MOST LIKELY cause an increase in the price of an item?
A)
declining popularity of the item
Eliminate
B)
a decrease in the price of a substitute product
improved technology in the production of that item
D)
an increase in the cost of raw materials for that item
Answer: D
Explanation:
It is the most likely one
Explanation:
sorry if you get it wrong but I think its b
Which of these is the smallest?
cells
atoms
molecules
cell membranes
Science 7th grade
Answer: atoms
Explanation: cell membrane is in a cell
To make a ball move faster, you need to increase
The force applied to the ball
The size of the ball
O The mass of the ball
The friction under the ball
Answer:
The force applied to the ball.
Explanation:
Hope this helps!! Good luck!!
Which property is not a physical property?
A. Color
B. Ability to Burn
C. Density
D. Melting Point
Answer: Ability to Burn
Explanation: I TOOK THE TEST
Which of the following is the best description of matter?
Answer:
description of matter:
Matter is everything around you. Atoms and compounds are all made of very small parts of matter. Those atoms go on to build the things you see and touch every day. Matter is defined as anything that has mass and takes up space (it has volume).
please give me brainliest if I answered you question correctly
The reaction between ethylene and hydrogen bromide to form ethyl bromide is carried out in a continuous reactor. The product stream is analyzed and found to contain 56.7 mol% C2H5Br and 10.3 mol% HBr. The feed to the reactor conains only ethylene and hydrogen bromide. Calculate the fractional conversion of the limiting reactant and the percentage by which the other reactant is in excess. If the molar flow rate of the feed stream is 265 mol/s, what is the extent of reaction
Answer:
Extent of reaction = 95.9 mol.
Fractional conversion of the limiting reactant = 0.846.
Percentage by which the other reactant is in excess = 25.2 %.
Explanation:
Hello.
In this case, for the undergoing chemical reaction:
[tex]CH_2=CH_2+HBr\rightarrow CH_3-CH_2Br[/tex]
We can write the mole balance per species also including the extent of the reaction:
[tex]CH_2=CH_2:A\\\\HBr: B\\\\CH_3-CH_2-Br:C[/tex]
[tex]x_AP=z_AF-\epsilon \\\\x_BP=z_BF-\epsilon \\\\x_CP=\epsilon[/tex]
Considering that P is the flow of the outlet product. In such a way, writing the data we know, we can write:
[tex]0.33P=z_A*265-\epsilon \\\\0.103P=z_B*265-\epsilon \\\\0.567P=\epsilon[/tex]
Whereas we can replace the C2H5Br mole balance in the others mole balances:
[tex]0.33P=z_A*265-0.567P \\\\0.103P=z_B*265-0.567P\\\\\\z_A*265-0.897P=0\\\\z_B*265-0.67P=0[/tex]
By knowing that [tex]z_B=1-z_A[/tex], we can write:
[tex]z_A*265-0.897P=0\\\\(1-z_A)*265-0.67P=0\\\\\\z_A*265-0.897P=0\\\\-z_A*265-0.67P=-265[/tex]
Thus, solving for P and [tex]z_A[/tex], we obtain:
[tex]z_A=0.572\\\\P=169.11mol[/tex]
It means that the extent of the reaction is:
[tex]\epsilon=0.567P=0.567*169.11mol\\\\\epsilon=95.9mol[/tex]
For the limiting reactant, due to the 1:1 mole ratio between the reactants, it is the one having the smallest flow rate:
[tex]F_A=0.572*265mol=151.58mol\\\\F_B=265mol-151.58mol=113.42mol[/tex]
It means that the limiting reactant is B which is HBr, whose fractional conversion is:
[tex]X_B=1-\frac{0.103*169.11}{113.42mol}\\ \\X_B=0.846[/tex]
Finally, the percentage by which the other reactant is in excess, corresponds to:
[tex]\% excess =(1-\frac{113.42mol}{151.58mol})*100\%\\ \\\%excess=25.2\%[/tex]
Regards.