Answer:
the movement of snail on the ground is in random motion.
the strings of the guitar is in oscillatory motion.
the whirling of stone tied with a thread is in circular motion.
An electrician reads a resistance of 65 ohms and when energize the circuit runs 1.77 amps. what voltage to the system run on?
Answer:
115.05 Volts
Explanation:
We can use Ohm's Law!
V=IR
V= 1.77 * 65
V=115.05 Volts
A block of wood
wood, with mass 1.34 kg rests stationary
on horizontal ground.
The coefficient of Kinetic
friction between the block and the ground is 0.966.
A bullet, with mass 0.250kg, moving horizontally
hits and sticks into the block of wood. We find
that the speed of the block of wood, with the
ballet embedded in it, just after collision is 11.9 m/s.
A) calculate the speed of the bullet before hitting the block of wood.
it, just after the collision
is 11-9mis.
as calculate the speed of the bullet before
s
hitting the block of wood.
Answer:
Explanation:
conservation of momentum
m(u) + M(0) = (m + M)v
u = (m + M)v/m
u = (0.250 + 1.35)(11.9) / 0.250
u = 76.16
u = 76.2 m/s
That's a fairly massive, and slow, bullet.
Giving all of my points! (please help with a few questions if you can)
Physical Science A Semester Exam Hydrogen is in Group 1 of the periodic table. Which kind of bond would form between two hydrogens?
O A covalent bond would form because the electron would be shared so both hydrogens have a full, stable shell.
O An ionic bond would form because both atoms are nonmetals.
O An ionic bond would form because one hydrogen would transfer its valence electron to the other hydrogen to make a full
O A metallic bond would form because both atoms are metals.
[tex]\huge \bf༆ Answer ༄[/tex]
The Correct choice is ~ A
A covalent bond would form because the electron would be shared so both hydrogens have a full, stable shell.
A covalent bond would form between two hydrogens because the electron would be shared so both hydrogens have a full, stable shell.
What is covalent bond?Equal shares of electrons from the two involved atoms result in the formation of a covalent bond. This sort of bonding's electron pair is known as the shared pair or bonding pair. Molecular bonds are another name for covalent bonds. The atoms will reach stability in their outer shell, analogous to the atoms of noble gases, thanks to the sharing of bonding pairs.
The simplest material with a covalent bond is the hydrogen molecule. Two hydrogen atoms, each with one electron in a 1s orbital, combine to produce it. The two electrons in the covalent bond are shared by both hydrogen atoms, and each one takes on an electron configuration like that of helium.
Learn more about covalent bonds here:
https://brainly.com/question/10777799
#SPJ2
How far has a 15 kg object moved, when a force of 22 N is applied for 5 seconds if it started at 3 m/s?
If you have a final velocity of 50 m/s and travelled for 120 seconds. What
is your acceleration?
Answer:
a=v-u/t
Explanation:
use this formula and initial velocity is 0
Answer:
Acceleration (a) is 0.416666667 m/ s^2
Explanation:
Acceleration (a) is the change in velocity (Δv) over the change in time (Δt), represented by the equation
a = Δv/Δt.
A woman skis from rest down a hill 20 m high. If friction is negligible, what is her speed at the bottom of the slope? Select one: O a. 20 m/s O b. 12 m/s O c. 400 m/s O d. 6 m/s
Hi there!
We can use the work-energy theorem to solve.
Recall:
[tex]\large\boxed{E_i = E_f}}[/tex]
Initial energy = final energy
The initial energy is purely potential (she starts from rest), and, if we assign the bottom of the slope as the 0 line, her energy at the bottom is purely kinetic.
PE = mgh
KE = 1/2mv²
We can begin by setting the two equal:
mgh = 1/2mv²
Cancel out the mass and rearrange to solve for velocity:
2gh = v²
v = √2gh
Plug in given values and use g ≈ 10 m/s²:
v = √2(10)(20) = 20 m/s
Which one is it??? The question and the choice are in the photo.
The answer is:
That they are switched on
Who did the ram caught in the thicket (Genesis 22:13) represent?
Answer:
I'm no Bible person, but I think it stands for i-dont-give-a-donkey-poop.
and suck-dog-nuts.
The degree of coldness or hotness is different for different objects. Explain with an example
Answer:
Explanation:
The degree of hotness and coldness of air is known as temperature and is measured with a thermometer in degrees-Fahrenheit or degrees-Celsius. Mercury is the only one in the liquid state at room temperature. It is used in thermometers because it has a high coefficient of expansion. The flow of heat will be always from higher to lower temperature.
PLS MARK ME WITH BRAINLEST
I need help with this answer I believe it's a democracy
Answer:
a. democracy
Explanation:
beacouse the government control of their members
E
D
С
B
A
Column
Column
1.
Electron Cloud
B
2
Nucleus
b. A
3.
Electron
CD
4.
Neutron
d.
5.
Proton
ec
Answer:
1. D electron cloud
2. A nucleus
3. E electron
4. B neutron
5. C proton
Explanation:
electrons are located outside the nucleus. The nucleus holds the protons and neutrons. Protons have a positive symbol (+). electron cloud holds the electrons.
Explanation:
Electron cloud : D
Nucleus : A
Electron : E
Neutron : B
Proton : C
hope this helps you.
What are the advantages of vacuum diode ?
Answer:
An electron tube from which all air has been removed. The vacuum ensures transparency inside the tube for electric fields and moving electrons. Most electron tubes are vacuum tubes; cathode-ray tubes, which include television picture tubes and other video display tubes, are the most widely used vacuum tubes
Explanation:
hope it help
20 PTS!
If an object is moving at a constant velocity, which must be true?
Its acceleration is zero.
Its acceleration in decreasing.
Its acceleration is increasing,
Its acceleration is a non-zero constant.
[tex]\huge \bf༆ Answer ༄[/tex]
The Correct choice is ~ A
[tex] \textsf{its \: acceleration \: is \: zero}[/tex]If an object moves at a constant velocity, then the change in velocity over the time is 0, Acceleration is defined as rate of change in velocity but since there is no change in velocity, the value of Acceleration is equal to Zero.
How much work is done on a 30 kg object when 20 Newton’s of force is exerted for a distance of 5 meters
Answer:
Work = force * displacement
= 50 N * 20 Meter
=1000 Newton meter = 1000 joule .
Explanation:
How many joules of energy does a 100-watt light bulb use per hour? How fast would a 70-kg person have to run to have that amount of kinetic energy?
Answer:
*1) 100 Joule energy
*2) 101.2 m/s
Explanation:
*1) 1J = 1w
100J = 100w
*2) A 70-kg person will have to run at a speed of 101.2 m/s to have that amount of kinetic energy.
How is Compression Force Measured?
don't just copy theanswer please
Compression force can be measured with a force gage or load cell.
an electron moves in a circular path in a region os space filled with a uniform magnetic field B= 0.4 T. to double the radius of the electron’s path, the magnitude of the magnetic field must become:
a. 0.8 T
b. 0.2 T
c. 0.1 T
d. 0.3 T
e. zero
Answer:
[tex]0.2\; {\rm T}[/tex], assuming that the speed of the electron stays the same.
Explanation:
Let [tex]v[/tex] denote the speed of this electron. Let [tex]q[/tex] denote the electric charge on this electron. Let [tex]m[/tex] denote the mass of this electron.
Since the path of this electron is a circle (not a helix,) this path would be in a plane normal to the magnetic field.
Let [tex]B[/tex] denote the strength of this magnetic field. The size of the magnetic force on this electron would be:
[tex]F = q\, v\, B[/tex].
Assuming that there is no other force on this electron. The net force on this electron would be [tex]F = q\, v\, B[/tex]. By Newton's Second Law of motion, the acceleration of this electron would be:
[tex]\begin{aligned}a &= \frac{F}{m} \\ &= \frac{q\, v\, B}{m}\end{aligned}[/tex].
On the other hand, since this electron is in a circular motion with a constant speed:
[tex]\begin{aligned} a = \frac{v^{2}}{r} \end{aligned}[/tex].
Combine the two equations to obtain a relationship between [tex]r[/tex] (radius of the path of the electron) and [tex]B[/tex] (strength of the magnetic field:)
[tex]\begin{aligned}\frac{q\, v\, B}{m} = \frac{v^{2}}{r}\end{aligned}[/tex].
Simplify to obtain:
[tex]\begin{aligned}r &= \frac{m\, v^{2}}{q\, v\, B} \\ &= \frac{m\, v}{q\, B} \\ &= \left(\frac{m\, v}{q}\right)\, \frac{1}{B}\end{aligned}[/tex].
In other words, if the speed [tex]v[/tex] of this electron stays the same, the radius [tex]r[/tex] of the path of this electron would be inversely proportional to the strength [tex]B[/tex] of the magnetic field. Doubling the radius of this path would require halving the strength of the magnetic field (to [tex]0.2\; {\rm T}[/tex].)
A block slides on a rough 45 degree incline. The coefficient of friction is µk what is the ratio of acceleration when the block accelerates down the incline to the acceleration when the block is projected up the incline
Answer:
[tex]\frac{a_{d}}{a_{i}} = \frac{(1 -mu)}{mu}[/tex]
= (1 - μ)/μ
Explanation:
Always draw a diagram!
Up the incline:
[tex]Fr_{max}[/tex] = maximum friction
[tex]Fr_{max}[/tex] = μk
k = R = mg.cos(45) = mg.sin(45)
Resolution of forces parallel to the slope:
F (Fp in the diagram) = force of propulsion
g = gravity
[tex]F - Fr_{max} = ma_{i}[/tex]
[tex]F -[/tex] μ.mg.cos(45) [tex]= ma_{i}[/tex]
Down the decline:
Resolution of forces:
[tex]mg.sin(45) - Fr_{max} = ma_{d}[/tex]
[tex]mg.sin(45) -[/tex] μ.mg.cos(45) [tex]= ma_{d}[/tex]
Then, find the ratio:
[tex]\frac{ma_{d}}{ma_{i}} = \frac{mg.sin(45) - mu.mg.cos(45)}{-F + mu.mg.cos(45)} \\\\ \frac{a_{d}}{a_{i}} = \frac{k - k.mu}{-F + k.mu} \\\\ = \frac{k(1 -mu)}{-F + k.mu}[/tex]
Potentially, there is no need to consider F in this situation, in which case:
[tex]\frac{a_{d}}{a_{i}} = \frac{k(1 -mu)}{k.mu} \\\\ = \frac{(1 -mu)}{mu}[/tex]
= (1 - μ)/μ
Hydrochloric acid and sodium hydroxide react to produce water and sodium chloride in endothermic reaction. Which statement must be true of the reaction?
A. more bond energy is absorbed on the reactants side than is released on the products side.
B. The energy of each bond in water and sodium chloride is greater than the energy of each bond in hydrochloric acid and sodium hydroxide
C. The bond energy used to break the bonds in hydrochloric acid in the sodium hydroxide is less than the energy released to from the bonds in water and sodium chloride.
D. The total energy of wster and sodium chloride is greater than the total bond energy of hydrochloric acid and sodium hydroxide.
In the endothermic reaction, the total energy of water and sodium chloride is greater than the total bond energy of hydrochloric acid and sodium hydroxide.
Endothermic reactions are reactions in which heat energy is absorbed during the reaction. The formation of products by the reactants requires addition of heat because the energy required to form the bond in the products is greater than the energy released when reactant bond are broken.
Thus, in an endothermic reaction, the total bond energy of the products are greater than the bond energy of the reactants.
The properties of endothermic reactions include:
Heat is absorbed by the system from the surroundings The entropy of the surrounding decreases (ΔS <0) Enthalpy change (ΔH) is positiveExamples of endothermic reactions include;
Cooking of foodDissolution of ammonium chloride in waterThe reaction between acids and bases to form salt and water known as neutralization reactions are usually exothermic in nature.
However, if a given reaction between hydrochloric acid and sodium hydroxide to produce water and sodium chloride is endothermic as in the question, the total energy of water and sodium chloride is greater than the total bond energy of hydrochloric acid and sodium hydroxide.
Learn more at: https://brainly.com/question/11906094
Learn more at: https://brainly.com/question/6506846
Answer: C.) The total bond energy of water and sodium chloride is greater than the total bond energy of hydrochloric acid and sodium hydroxide.
Hope this helps :)
How large is the acceleration of a 25 kg mass with a net force of 75 N applied horizontally to it?
Answer:
Explanation:
F = ma
a = F/m
a = 75/25
a = 3 m/s²
True or False. Father of a multitude" obeyed God's command to kill His son because the Ten Commandments had not yet been given.
Answer:
Explanation:
The father of the Multitude was Abraham. And he did precede the 10 commandments. But the story really has nothing to do with the 10 commandments.
He obeyed God's Command because it was God who issued it. Abraham had complete faith in God's ability to make things come out right. The sacrifice of Isaac was a test of faith.
I would advise you to answer true, but whoever wrote the question employed a twisted kind of logic. The sacrifice of Isaac had nothing to do with the 10 commandments. Thou Shalt not murder is not really covered by this circumstance.
So true might not be the correct answer. The question is very complex and does not lend itself to a simple True/ False answer.
12- Calculate the power when a force of 60N moves an object over a distance of 0.6 km in 20
minutes
A. 100watts
B. 6,000 watts
C. 0.25watts
D. 30 watts
Hi there!
To solve, we must begin by calculating the total WORK done on the object.
W = F · d (Force · displacement)
Plug in the given values. Remember to convert km to m:
1 km = 1000 m
0.6 km = 600 m
W = 60 · 600 = 36000 J
Now, we can solve for power:
P = W/t
Convert minutes to seconds:
1 min = 60 sec
20 min = 1200 sec
P = 36000/1200 = 30 W ⇒ Choice D.
I need help with us history
Answer:
English is the language
Answer: im most likely wrong but i think its A
Explanation:
5. Layer of Earth consisting of crust & upper layer of mantle ________
Answer:
lithosphere
Explanation:
hope this helps you!!
Which of the following statements is NOT true of a hypoosmotic solution?
A. It is also known as a hypotonic solution.
B. There are more dissolved solids within the cell than outside the
cell.
C. It may cause water to move into the cell, which will cause it to
swell.
D. It may cause the cell to shrink or crenate.
Answer:
Good luck on the test, you donuts.
Explanation:
Would it be possible to predict the speeds that a coaster will reach before it’s ever placed on the track?
Yes, it's possible to predict the speeds that a coaster will reach before it’s
ever placed on the track.
This is usually calculated with the potential energy which is
Potential energy = m g h
where m is mass, g is acceleration due to gravity and h is height.
The given formula above is used in predicting the speeds that a coaster will
reach before it’s ever placed on the track.
Read more about Speed here https://brainly.com/question/14298262
An Astronaut lands on an Earthlike planet and drops a small lead ball with a mass from the top of her spaceship. The point of release is 25 m above the surface of the planet and the ball takes 5 s to reach the ground. The astronaut's mass is 80 kg. Astronaut weight on the planet is
PLEASE NO LINKS, REAL ANSWERS DON'T WASTE TIME.
First we have to find out the gravity on that planet. We use Newton second equation of motion. It is given as,
s = ut +(gt^2)/2
Distance s = 25m
Time t = 5 s
Velocity u = 0
By putting these values,
25 = 1/2.g.(5)²
g = 2
So the gravity on that planet is 2. Lets find out the weight of the astronaut.
Mass of the astronaut on earth m = 80 kg
Weight of astronaut on earth W = mg = (80)(9.8) = 784 N
Weight of astronaut on earth like planet = (80)(2) = 160 N
x = 160N
VERY EASY QUESTION FOR HIGH SCHOOL STUDENTS:
Which of the following frequencies would you expect a young person to be able to hear? 500 Hz, 6000 Hz, 25000 Hz, 15 Hz, 15000 Hz
Answer:
Explanation: 6000z
The potential difference between the (high-voltage) inner shell of a Van de Graaff accelerator and a point where the charge is injected into the moving belt is 3.4 MV. What is the minimum power required to pull the belt when the belt transfers the charge to the case at 2.8 mC/s?
Explanation:
this is the answer to the questions
1. An electrically charged atom ___________
Answer:
Is called an Ion
Explanation:
Answer:
An electrically charged atom is called an ion