Identify the FALSE statement. Differentiation of large planetesimals and protoplanets:
is the process by which these bodies develop internal layering.
began with heating up component materials within these bodies.
was caused by heat created by the transformation of kinetic energy from collisions into thermal energy.
was inhibited if radioactive elements were present because their decay required heat input from the surroundings.
resulted in a central ball of iron alloy (the core) and an outer shell of lighter rocky materials (the mantle.)

The correct answer is (a): satellite 1's acceleration is half as much as satellite 2's.

This is due to the fact that the acceleration of two satellites in a circular orbit depends on their masses and orbital periods. Satellite 2 accelerates more quickly because it has twice as much mass as satellite 1. As a result, satellite 1 accelerates at a rate that is half that of satellite 2.

This results in a divergence in the orbits of the two spacecraft since satellite 1's speed will rise more slowly than satellite 2's. Over time, this difference will become more obvious, with satellite 1's orbit straying from a circular form more so than satellite 2's.

Complete question is provided in the image below.

Read more about Acceleration:

https://brainly.com/question/29223620

#SPJ4

The device used to vary the current in a circuit is a variable resistor. The symbol of a variable resistor is option d. The symbol with a rectangle and an arrow.

A variable resistor also called a rheostat  is a resistor of which the electric resistance value can be adjusted. A variable resistor is in essence an electro-mechanical transducer and normally works by sliding a contact (wiper) over a resistive element.

When a variable resistor is used as a potential divider by using 3 terminals it is called a potentiometer.

When only two terminals are used, it functions as a variable resistance and is called a rheostat. Electronically controlled variable resistors exist, which can be controlled electronically instead of by mechanical action. These resistors are called digital potentiometers.

Here, the resistance thereby the current through the lamp 2 can be varied by placing a resistor. Hence, option d is correct.

Find more on rheostat:

https://brainly.com/question/28767196

#SPJ1

The symbol used in diagram to represent the device is rheostat's symbol.

Correct option is D.

Electric current is defined as the rate of flow of electrons in a conductor. The SI Unit of electric current is the Ampere.

In given circuit,

A device is added to the electrical circuit to vary the current in Lamp 2 only,

Electrical current is varied by applying variable resistance,

The device used to apply variable resistance is rheostat, which has symbol of box with an arrow through it.

Hence, rheostat's symbol will be used in diagram to represent the device.

Learn more about electric current here:

https://brainly.com/question/29766827

#SPJ1

The diffusion coefficient based on the provided data is 3.651 x 10^(-5) cm^2/s. (Option C)

The diffusion coefficient refers to the ratio of flux density to the negative of the concentration gradient in direction of diffusion. The diffusion coefficient in solids at different temperatures is generally found to be well predicted by the Arrhenius equation:

D=Do exp (-E/RT)

Where D is the diffusion coefficient (in m2/s), Do is the maximal diffusion coefficient (at infinite temperature; in m2/s), E is the activation energy for diffusion (in J/mol), T is the absolute temperature (in K), and R ≈ 8.31446 J/(mol⋅K) is the universal gas constant.

In the given case,

Do = 0.0047 cm/s = 4.7 x 10^-5 m/s

E = 18300 cal/mol = 76567.2 J/mol

T = 700°C = 973.15 K

Hence,

D=(4.7 x 10^(-5)) exp (-76567.2/(8.31446*973.15))

D=(4.7 x 10^(-5)) exp (-9.463)

D=3.651 x 10^(-9) m^2/s or 3.651 x 10^(-5) cm^2/s

Note: The question is incomplete.  The complete question probably is: What is the diffusion coefficient (D) for iron at 700°C, with an activation energy (E) of 18,300 cal/mol, and Do = 0.0047cm/s. A) 2.43E3 cm2/s B) 9.08E-9 cm2/s C) 3.64E-5 cm2/s D) 60.66 cm2/s.

Learn more about Diffusion coefficient:

https://brainly.com/question/15741233

#SPJ4

As the object is raised, the gravitational potential energy of the system grows. When you drop something, the potential energy of the object is transformed into kinetic energy, which is the energy of the moving object, when it strikes the ground.

What is kinetic and potential energy?

Potential energy is the energy stored in an object or system due to its position or arrangement of elements. It is unaffected by the environment outside the installation or system, such as air or altitude. Conversely, kinetic energy refers to the energy of moving particles in a system or object.

An object's kinetic energy, unlike potential energy, relates to other stationary and moving objects in its immediate vicinity. Thus, the lifted object is in kinetic motion when released.

To learn more about Kinetic Energy, here

brainly.com/question/1932868

#SPJ1

The magnitude of acceleration of the car during the entire test is 4.83 m/s^2.

To calculate the magnitude of acceleration of the car before the collision, we can use the formula for uniform acceleration:

a = (v_f - v_i) / t

where a is acceleration, v_f is final velocity, v_i is initial velocity, and t is time.

v_i = 0 (the car is initially at rest), v_f = 145 km/h = 40 m/s, t = 8.28 s

a = (40 - 0) / 8.28 = 4.83 m/s^2

To calculate the magnitude of acceleration of the car during the collision, we can use the formula for average acceleration:

a = (v_f - v_i) / (2t)

where v_f is the final velocity after the collision (82 km/h = 22.8 m/s), v_i is the initial velocity before the collision (145 km/h = 40 m/s), and t is the time of the collision (0.815 s).

a = (22.8 - 40) / (2 * 0.815) = -19.86 m/s^2

Finally, to find the magnitude of acceleration of the car during the entire test, we have to integrate the acceleration over the time interval from t = 0 to t = 8.28 s. The area under the acceleration versus time graph represents the velocity of the car. By finding the velocity at t = 8.28 s, we can find the acceleration required to get from rest to that velocity.

v = a * t = 4.83 * 8.28 = 40 m/s

a = v / t = 40 / 8.28 = 4.83 m/s^2

So the magnitude of acceleration of the car during the entire test is 4.83 m/s^2.

Learn more about magnitude here

https://brainly.com/question/28173919

#SPJ4

The answer is (E) I, II, and III. When a satellite of mass m moves in a circular orbit of radius r at a constant speed v, all three statements are true.

i. The net force on the satellite is equal to mv^2 / r and is directed toward the center of the orbit. This force is known as the centripetal force, and it keeps the satellite moving in a circular path.

ii. The net work done on the satellite by gravity in one revolution is zero. Work is defined as the dot product of force and displacement, and the displacement of the satellite in a circular path is zero, so the net work done on it is also zero.

iii. The angular momentum of the satellite is a constant. Angular momentum is a measure of an object's rotational motion and is conserved if there are no external torques acting on the system. In this case, the satellite is in a stable orbit and there are no external torques acting on it, so its angular momentum is conserved and remains constant.

Therefore, all three statements (I, II, and III) must be true.

Learn more about Mass:

https://brainly.com/question/28021242

#SPJ4

[tex]{ \qquad\qquad\huge\underline{{\sf Answer}}} [/tex]

If we add a new residence in the circuit in parallel to the bulb of same resistance, the resultant resistance will get half the value of initial resistance [ when only bulb was connected in the circuit ], the current will increase as resultant resistance is half the original. and same current will flow in both the parallel wires.

So, by above information :

A.) Current would increase ? [ Yes ], As by ohms law, V = IR

and, if R is halfed, to maintain the same potential difference, current in the circuit will increase.

B.) Total voltage will decrease ? [ No ]... voltage will remain constant

C.) The current would stay the same ? [ yes ], it would increase...

D.) Total resistance would remain same ? [ No ], it will decrease...

The secant modulus and the tangent modulus for the stress level of 50,000 psi are both 4.5x10-9 psi-1.

Secant modulus is a measure of a material's ability to resist deformation under stress. It is the ratio of stress to strain in a material and is equal to the slope of a line drawn between two points on a stress-strain curve.

The secant modulus is the slope of the line connecting two points on the stress-strain curve. In this case, the two points we need to consider are (50,000 psi, ε) and (0 psi, 0).
Therefore, the secant modulus is given by:
secant modulus = (ε - 0) / (50,000 psi - 0 psi)
Plugging in the equation for ε, we get:
secant modulus = (0.3x10-16x50,0003 - 0) / (50,000 psi - 0 psi)
secant modulus = 4.5x10-9 psi-1
The tangent modulus is the slope of the tangent line to the stress-strain curve at a given point. In this case, the point is (50,000 psi, ε).
Therefore, the tangent modulus is given by:
tangent modulus = dε/dσ
Plugging in the equation for ε, we get:
tangent modulus = (3x10-16x50,0002) / (1 psi)
tangent modulus = 4.5x10-9 psi-1
Therefore, the secant modulus and the tangent modulus for the stress level of 50,000 psi are both 4.5x10-9 psi-1.

To learn more about stress-strain curve
https://brainly.com/question/12910255
#SPJ4

After applying the gravitational potential energy, the amount work done in lifting a 35 kg sandbag to a height of 4.5 m would be 1,544 Joule

Gravitational potential energy is another name for work done against gravity. Because of this, if a mass (m) object is lifted through a height (h), the work done on it will be [m × g × h], and this energy will be stored as gravitational potential energy in the body.

Thus, the amount work done would be:

Work = m × g × h

         = 35 kg × 9.8 m/s² × 4.5 m

         = 1,543.5 Nm

         = 1,543.5 Joule

         = 1,544 Joule

To learn more about gravitational potential energy, click here:

https://brainly.com/question/17511189

#SPJ4

The magnitude of your total displacement is 745 m.

The total displacement of the your motion is calculated by applying the following formula as shown below;

Δx = x₂ - x₁

where;

The magnitude of your total displacement is calculated as follows;

Δx = ( 23 m/s x 155 s ) - ( 12 m/s x 235 s )

Δx = 745 m

Thus, the magnitude of your total displacement is based on the change of your position.

Learn more about total displacement here: https://brainly.com/question/15164011

#SPJ1

The distance ratio r2/r1 is approximately 0.605. 

The point charge is given by

E = k*q/r^2

where E is the electric field, k is the Coulomb constant ([tex]k = 8.99 * 10^9 Nm^2/C^2[/tex]), q is the charge of the point charge, and r is the distance between the point charge and the location. The electric field is measured.

Using this equation, we can find the distance ratio r2/r1.

[tex]E1 = k*q/r1^2\\E2 = k*q/r2^2[/tex]

Dividing these equations gives:

[tex]E2/E1 = (kq/r2^2) / (kq/r1^2)\\E2/E1 = (r1/r2)^2[/tex]

Solving for r2/r1 gives:

r2/r1 = √(E2/E1)

Inserting the given value will result in:

r2/r1 = √(145n/C ÷ 397n/C)

r2/r1 = √(0.365)

r2/r1 = 0.605

Therefore, the distance ratio r2/r1 is approximately 0.605. 

To know more about ratio visit:

brainly.com/question/20698993

#SPJ4

Answer:

20Ω

Explanation:

we are here given that,

From Ohm's law ,

[tex]\implies V = iR \\[/tex]

where,

on substituting the respective values, we have,

[tex]\implies 8V = 0.4A \times R\\[/tex]

[tex]\implies R =\dfrac{8V}{0.4A} \\[/tex]

[tex]\implies \underline{\underline{ R = 20\Omega}}\\[/tex]

and we are done!

The light year is an unit of measure for distance. It is defined as the distance travelled by light in a vacuum over the course of a year.

A vacuum is a space area that is either devoid of matter or has a pressure so minimal that any particles there have no bearing on any processes occurring there. It is a condition that has a pressure that is measured in units of pressure and is much lower than the mean air pressure.

The quantity of force applied to a certain region is referred to as pressure. So either a strong force or a strong force applied over a short area can cause a lot of pressure (or do both).

To know more about vacuum visit :

brainly.com/question/17141343

#SPJ4

The net gravitational force is terms of L and h and is equal to[tex]f_{net} = G m_3*(m_2 / ((L - 1)^2 + h^2) + m_1 / (L^2 + h^2))[/tex]

(a) The gravitational force on the Moon due to the Earth can be calculated using the equation:

f_gravity = G * (m2 * m3) / d^2

where d is the distance between the Earth and the Moon. The distance between the Earth and the Moon can be calculated using the Pythagorean theorem:

d = sqrt((L - 1)^2 + h^2)

Plugging in the values, we get:

[tex]f_{gravity} = G * (m_{Earth} * m_{Moon}) / d^2 = G * (m_{2} * m_{3}) / d^2 \\\\= G * (m_{2} * m_{3}) / (sqrt((L - 1)^2 + h^2))^2[/tex]

(b) The gravitational force on the Moon due to the Sun can be calculated using the same equation as above:

f_gravity = G * (m1 * m3) / d^2

where d is the distance between the Sun and the Moon. The distance between the Sun and the Moon can be calculated using the Pythagorean theorem:

d = sqrt(L^2 + h^2)

Plugging in the values, we get:

[tex]f_{gravity} = G * (m_{Sun} * m_{Moon}) / d^2 \\= G * (m_{1} * m_{3}) / d^2 = G * (m_{1} * m_{3}) / (sqrt(L^2 + h^2))^2[/tex]

(c) The net gravitational force on the Moon is the sum of the gravitational forces due to the Earth and the Sun:

f_net = f_gravity_Earth + f_gravity_Sun

Substituting the values of f_gravity_Earth and f_gravity_Sun, we get:

[tex]f_{net} = G * (m_2 * m_3) / (sqrt((L - 1)^2 + h^2))^2 + G * (m_1 * m_3) / (sqrt(L^2 + h^2))^2[/tex]

[tex]f_{net} = G * (m_2 * m_3) / ((L - 1)^2 + h^2) + G * (m_1 * m_3) / (L^2 + h^2)[/tex]

[tex]f_{net} = G m_3*(m_2 / ((L - 1)^2 + h^2) + m_1 / (L^2 + h^2))[/tex]

Read more about Gravitation:

https://brainly.com/question/30048355

#SPJ4

Answer:

3Ω

Explanation:

we are here given that,

From Ohm's law , we know that,

[tex]\implies V = iR \\[/tex]

where ,

on substituting the respective values, we have,

[tex]\implies 12V = 4A(R) \\[/tex]

[tex]\implies R =\dfrac{12V}{4A} \\[/tex]

[tex]\implies \underline{\underline{ R = 3\Omega}} \\[/tex]

and we are done!

At a height of 4.48 meters, a rock's kinetic energy is twice its potential energy.

Potential energy is the energy stored in any object or system due to the position or arrangement of its parts. It is, however, unaffected by factors outside of the object or system, such as air or height. Kinetic energy, on the other hand, is the energy of moving particles in an object or system.

Given that a 6.0-kg rock is dropped from a height of 9.0 m.

Calculate the total potential energy at the initial point,

PE = mgh

PE = 6 x 9.81 x 9

PE = 530.74 J

At the zero height, the kinetic energy will be maximum and is equal to the total energy,

KE = 530.75 J

1/2 mv² = 530.75

v² = 175.85

The height at which the kinetic energy is two times the potential energy is calculated as:-

1 /2 x mv² = 2 x mgh

h = ( 4 v²) / ( 4 x 9.81 )

h = 4 ( 175.82 ) / ( 4 x 9.81 )

h = 4.48 meters

To know more about Kinetic energy and Potential energy follow

https://brainly.com/question/13388533

#SPJ1

Answer:

15.33 m/s

Explanation:

We are here given that ,

As we know that,

[tex]\longrightarrow R = \dfrac{u^2\sin2\theta}{g} \dots (1)\\[/tex]

And ,

[tex]\longrightarrow h =\dfrac{u^2\sin^2\theta}{2g} \dots (2)\\[/tex]

Divide equation 1 and 2 ,

[tex]\longrightarrow \dfrac{R}{h}=\dfrac{4 \cos\theta}{\sin\theta} \\[/tex]

[tex]\longrightarrow \dfrac{24m}{6m}=4 \cot\theta \\[/tex]

[tex]\longrightarrow \cot\theta = 1 \\[/tex]

[tex]\longrightarrow \theta = \cot^{-1}(1) \\[/tex]

[tex]\longrightarrow \underline{\underline{\theta = 45^{\circ}}}\\[/tex]

Now we may substitute this value in equation 1 as ,

[tex]\longrightarrow 24 =\dfrac{ u^2\sin(2\times 45^{\circ} )}{g} \\[/tex]

[tex]\longrightarrow 24g = u^2\sin90^\circ \\[/tex]

[tex]\longrightarrow u^2 = 24 \times 9.8 \\[/tex]

[tex]\longrightarrow u =\sqrt{235.2} m/s \\[/tex]

[tex]\longrightarrow \underline{\underline{ u \approx 15.33 \ m/s }}\\[/tex]

and we are done!

The pressure of the gas is 0.970 atm.

The pressure of a gas can be calculated using the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

First, we need to find the number of moles of N2, which can be calculated using the molar mass of N2 and the mass of N2 in the container:

n = m/M

n = 0.293g / 28.02 g/mol

n = 0.0104 mol

Next, we need to find the temperature in Kelvin, which can be calculated using the root-mean-square speed of the gas molecules:

T = (2 * k * m / (3 * R))

T = (2 * 1.38 x 10^-23 J/K * 6.63 x 10^-27 kg * (178 m/s)^2 / (3 * 8.31 J/mol/K))

T = 298.15 K

Finally, we can use the ideal gas law to find the pressure:

P = nRT / V

P = (0.0104 mol * 8.31 J/mol/K * 298.15 K) / (1.62 L)

P = 0.970 atm

So the pressure of the gas is 0.970 atm.

You can learn more about pressure at

https://brainly.com/question/28012687

#SPJ4

Answer:

9.22 m=s

Explanation:

m=s×v

jskkdkdjdhbdnkksksijsj

jdjkdo

The condition for the photodynamic effect to occur is that the pigment must have the absorption spectrum is the same as the absorption spectrum of the substrate.

In order to induce cell death  (phototoxicity), photodynamic treatment (PDT), a type of phototherapy, uses light, a photosensitizing agent, and molecular oxygen.

PDT is frequently used to treat acne. It is clinically used to treat a variety of medical problems, such as wet age-related macular degeneration, psoriasis, and atherosclerosis. It has also showed some promise in the treatment of viral diseases like herpes. Malignant malignancies of the head and neck, bladder, lung, and specific skin types are also treated by it.

Learn more about photodynamic  here:

https://brainly.com/question/28450241

#SPJ1

Answer:

The soccer ball would keep traveling until it hit something else.

Explanation:

Friction acts as a force that opposes motion and slows objects down. When friction is absent, there is no force slowing the soccer ball down. So, without friction, the soccer ball would continue to move in a straight line at a constant velocity (assuming no other forces are acting on the ball) until it encounters an obstacle such as a wall or the ground, at which point it would stop.

The Earth's motion is unrelated to your motion, so the wall doesn't slam into you at 30 km/s.

Motion is the change in an object's location with regard to its surroundings over a specific amount of time.

While the earth moves relative to the sun at a speed of around 30 km/s, this velocity has no bearing on how things move on the surface of the planet. Because the motion of things on the surface of the earth is governed by the gravity of the earth rather than its velocity relative to the sun, when you jump upward in front of a wall, the wall does not slam into you at a speed of 30 km/s.

The uniform gravitational field produced by the earth's gravity causes things on its surface to accelerate steadily in the direction of the planet's center. Your muscles generate an upward push that causes you to jump upward, leaving the ground.

Similar gravitational effects are also felt by the wall, which maintains its equilibrium with respect to the surface of the earth. Since no outside force is acting on the wall to cause it to shift position when you jump upward, the wall does not move towards you.

To know more about motion, visit:

https://brainly.com/question/12640444

#SPJ4

Answer:

C) 0.83 Ω

Explanation:

If there is a non-trivial linear combination of the vectors that equals 0, then a set of vectors is said to be linearly dependent.

Physical quantities can be represented using vectors. Vectors are most frequently employed in physics to describe displacement, velocity, and acceleration. Vectors are depicted as arrows and combine magnitude and direction.

Because they may visually depict position, displacement, velocity, and acceleration, vectors are useful. It is crucial to indicate where the scale is being drawn at when drawing.

|v| =(x2 + y2) is the formula to calculate the magnitude of a vector in two dimensions, where v = (x, y). The equation |V| = (x2 + y2 + z2) can be used to calculate the magnitude of a vector in three dimensions, where V = (x, y, z).

Therefore, vectors because you frequently do not have enough room to draw them at the scale they represent.

Learn more about vector here:

https://brainly.com/question/29740341

#SPJ4

If a constant force of 85 lb is used to pull a cart a distance of 220 ft. Then the work done W is 18700 ft-lb.

Work is the amount of energy transferred when a force is applied over a distance. In this case, a constant force of 85 lb is used to pull a cart a distance of 220 ft. To find the work done, we can use the formula W = Fd, where F is the force and d is the distance. Plugging in the values, we get W = 85 x 220 = 18700 ft-lb. This is the amount of work done by the force to move the cart a distance of 220 ft.

You can learn more about work done at

https://brainly.com/question/28356414

#SPJ4

The correct relationship between T and P is represented by option B)

T = P.

The net force operating on the system is represented by the tension in the wire T, which is equal to the total of the forces acting on each weight. Because only the gravitational force and the tension force are operating on each weight in this situation, the net force exerted on each weight is equal to the difference between the tension and the weight. T must therefore equal the sum of the gravitational pull P and the forces acting on each weight.

Since m represents the mass of each weight and g is the acceleration brought on by gravity, the equation for the relationship between T and P must be T = P + m * g.

The complete question is provided in the image below.

Read more about Tension:

https://brainly.com/question/24994188

#SPJ4

The arrow pointing downward is gravitational force, F(g), The left arrow is the applied force, F(t), The right arrow is frictional force, F(f) and the arrow pointing upward is the net force, F(n).

A force is a push or pull upon an object resulting from the object's interaction with another object. Forces can cause an object to accelerate or change its direction of motion.

Forces can be described by their magnitude and direction. In physics, forces can be caused by many interactions, including gravity, electromagnetic forces, and the strong and weak nuclear forces.

Find out more on forces here: https://brainly.com/question/29120853

#SPJ1

It has been demonstrated that the angle when the body exits the sphere is   θ = cos⁻¹(2/3)

Between two surfaces that are sliding or attempting to slide over one another, there is a force called friction. For instance, friction makes it challenging to push a book down the floor. Every time an object moves or attempts to move, friction always acts in the direction opposing to that movement.

Force acting on a stationary particle

The following formula is used to compute the particle's force while it is stationary;

Rgcos = mgcos = mv2/R v2 —- (1)

power-saving measures

Utilizing the principle of energy conservation, one may calculate the object's ultimate speed once it begins to slide.

v2 = 1/2mR(1 - cos) = 2gR(R - Rcos) ---(2) reconcile (1) and (2)

Rgcos = 2gR (cos - 1);

cos = 2 - cos 2.

Cos1(2/3) = 3cos = 2cos = 2/3

As a result, the body exits the sphere at an angle of θ = cos⁻¹(2/3) , proved.

To know about mass

https://brainly.com/question/19694949

#SPJ4

The complete question is

A body of mass m and negligible size starts from rest and slides down the surface of a frictionless solid sphere of radius R. Prove that the body leaves the sphere when 0 = cos(2/3).

It is discovered that the object, which weighs 60g and has a volume of 50cm³, has a density of 1.2 g/cm³.

Under pressure, a liquid becomes denser. In other words, as an excessive force is given to a liquid, volume decreases and density increases, and as molecules get closer to one another, interparticle spacing decreases.

A substance or object's mass is a measure of how much matter it contains. Volume (the amount of space an object or substance occupies) to mass (the amount of material present) ratio is known as density (its mass).

According to the given information:

Mass= 60g

Volume = 50cm³

Density = mass / volume

        => 60/50 =>1.2 g/cm³

Learn more about density here:

brainly.com/question/28457627

#SPJ1

The gravitational force put by the planet earth on a unit mass at a distance from the center of the planet is "the strength of the gravitational field at that location".

It is directly proportional to the mass of the planet and inversely proportional to the square of the distance between the unit mass and the center of the planet. The formula for gravitational force is

      F = G * (m1 * m2) / r^2,

where

The strength of the gravitational field decreases with increasing distance from the planet.

You can learn more about gravitational field at

https://brainly.com/question/28437652

#SPJ4