I don't know what category to put this question in, but I attached a photo of it. Can someone please help me answer it?​

Answer:

We are given:

mass of the block = 3500 grams

volume of the block = 1000 mL

Finding the density:

Density = mass of the object (in grams) / volume of the object (in mL)

Density = 3500 / 1000

Density = 3.5 g / mL

Answer:

d

Explanation:

Answer:

The electrons are found on the outer shell of the atom.

Explanation:

Answer:

The value is  [tex]V_2  =   0.246 \  m^3/h[/tex]  

Explanation:

From the question we are told that

  The temperature at which the gas enters the compressor is  

         [tex]T_i = 298 \  K[/tex]

  The pressure  at which the gas enters the compressor is  

       [tex]P_I =  1.0 \ atm[/tex]

  The volumetric rate at which the gas enters the compressor is

      [tex]V  =  127 m^3/h[/tex]

   The temperature to which the gas is compressed to is  

      [tex]T_f  =  358 \ K[/tex]

  The pressure  to which the gas is compressed to is  

     [tex]P_f=  1000 \  atm[/tex]

Generally the volumetric flow rate of compressed oxygen is evaluated from the compressibility-factor equation of state as

    [tex]V_2  =  V_1 *\frac{z_2}{z_1} * \frac{T_2}{T_1} * \frac{P_1}{P_2}[/tex]

Here [tex]z_1[/tex] is the inflow compressibility factor with value [tex]z_1 = 1[/tex]

Here [tex]z_1[/tex] is the outflow compressibility factor with value [tex]z_2 = 1.61[/tex]

So

    [tex]V_2  =  127*\frac{1.61}{1} * \frac{358}{298} * \frac{1}{1000}[/tex]  

    [tex]V_2  =   0.246 \  m^3/h[/tex]  

Answer :

Part 1: 4.93 moles of [tex]H_2O_2[/tex] contains 9.86 moles of oxygen atoms.

Part 2: 2.01 moles of [tex]N_2O[/tex] contains 2.01 moles of oxygen atoms.

Explanation :

Part 1: 4.93 mol [tex]H_2O_2[/tex]

In 1 mole of [tex]H_2O_2[/tex], there are 2 atoms of hydrogen and 2 atoms of oxygen.

As, 1 mole of [tex]H_2O_2[/tex] contains 2 moles of oxygen atoms.

So, 4.93 moles of [tex]H_2O_2[/tex] contains [tex]4.93\times 2=9.86[/tex] moles of oxygen atoms.

Thus, 4.93 moles of [tex]H_2O_2[/tex] contains 9.86 moles of oxygen atoms.

Part 2: 2.01 mol [tex]N_2O[/tex]

In 1 mole of [tex]N_2O[/tex], there are 2 atoms of nitrogen and 1 atom of oxygen.

As, 1 mole of [tex]N_2O[/tex] contains 1 mole of oxygen atoms.

So, 2.01 moles of [tex]N_2O[/tex] contains [tex]2.01\times 1=2.01[/tex] moles of oxygen atoms.

Thus, 2.01 moles of [tex]N_2O[/tex] contains 2.01 moles of oxygen atoms.

Answer:

10.801 amu

Explanation:

From the question given above, the following data were obtained:

Isotope A (¹⁰B):

Mass of A = 10

Abundance (A%) = 19.9%

Isotope B (¹¹B):

Mass of B = 11

Abundance (B%) = 80.1%

Atomic mass of Boron =?

The atomic mass of boron can be obtained as illustrated below:

Atomic mass = [(Mass of A × A%)/100] + [(Mass of B × B%)/100]

= [(10 × 19.9)/100] + [(11 × 80.1)/100]

= 1.99 + 8.811

= 10.801 amu

Thus, the atomic mass of boron is 10.801 amu

The atomic mass of boron with natural abundance of 19.9% of 10 B and 80.1%  of 11 B is 10.801 amu

Boron has 2 isotopes.

First isotopes

mass = 10

% abundance = 19.9%

Second Isotopes

mass = 11

% abundance = 80.1%

Therefore,

Atomic mass = (19.9% of 10) + (80.1% of 11)

Atomic mass = (19.9 / 100 × 10) + (80.1 / 100 × 11)

Atomic mass = 199 / 100 + 881.1 / 100

Atomic mass = 1.99 + 8.811

Atomic mass = 10.801

Atomic mass = 10.801 amu

read more: https://brainly.com/question/14440832?referrer=searchResults

Answer:

Invasive species are an organism that causes ecological or economic harm in a new environment where it's not native.

Explanation:

An invasive species can harm both the natural resources in the ecosystem as well it threaten the human use of these resources and invasive species can be introduced to a new area via the ballast water of oceangoing ships, intentional and accidental releases of aquaculture species, aquarium specimens or bait, and etc.

Invasive species is capable of causing extinctions to native plants and animals, reducing biodiversity, competing with native organisms for limited resources, and altering habitats. This can also result a huge economic impacts and fundamental disruptions of coastal and the great lakes of the ecosystems.

I hope it helps you.

Answer:

Your answer is d

Explanation: silver carbonate Ag2CO3 is insoluble in water

Answer:

768g

Explanation:

We can use to formula [tex]N(A) = N_0(\frac{1}{2})^\frac{t}{t_{1/2}}[/tex] . Here, N(A) is the final amount. N0 is the initial amount. t is the time elapsed, and [tex]t_{1/2}[/tex] is the half life. Plugging in, we get the answer above.

The half life of I -137 is 8.07 days. if 24 grams are left after 40.35 days, 800 gram  were in the original sample.

The half-life (symbol t12) is the amount of time it takes for a volume (of material) to be reduced to half of its original value. In nuclear physics, the phrase is typically used to indicate how rapidly unstable atoms experience radioactive decay or even how long stable nuclei survive.

The phrase is sometimes used more broadly to describe any form of exponential (or, in rare cases, non-exponential) decay. The biological ½ of medications and other compounds in the human body, for example, is referred to in the medical sciences. In exponential growth, the inverse of half-life is doubling time.

ln P = kt + C

P = amount of I-137 at time t

C = constant

k = 1/time

t = time

1st condition:

P = Po, t = 0 days

2nd condition: (half-life)

P = 0.5Po, t = 8.07 days

3rd condition:

P = 25 grams, t = 40.35 days

Po = 800 grams

mass of I-137 = 800 gram

Therefore, 800 gram were in the original sample.

To learn more about  half life, here:

https://brainly.com/question/23485913

#SPJ6

Answer:

C3Br6

Explanation:

C= (1 X 12.011) = 12.011

Br= (2 X 79.904)= 159.808

159.808+12.011 = 171.819

515.46 divided by 171.819 = 3.00

so you mulitpy CBr2 by 3 which gives you C3Br6

Answer:

Cyclopropylmethylene

Answer:

i hope this helps. sorry if it totally doesn't

Answer:

The equilibrium concentration of [CH₃NH₂] = 0.23965 M.

The equilibrium concentration of CH₃NH₃⁺ and  OH⁻ =  0.01035 M respectively.

Explanation:

The first step is to write out the dissociation reaction. Therefore, the equation showing the dissociation is given as below;

CH₃NH₂ + H₂0   <--------------------------------------------------------> CH₃NH₃⁺ + OH⁻.

Kindly note that ''<----------->'' arrow shows that the reaction is an equilibrium reaction.

Therefore, at the start of the reaction [that is time, t =0], we have that the concentration of CH₃NH₂ = 0.25M, thus, the concentration of CH₃NH₃⁺  and  OH⁻ is zero respectively at this time, t =0.

At equilibrium, the concentration of CH₃NH₂ = 0.25M - x, thus, the concentration of CH₃NH₃⁺  and  OH⁻ is x respectively.

Therefore, kb =  4.47 × 10-4 = [CH₃NH₃⁺ ][OH⁻]/[CH₃NH₂].  Hence, slotting in the values into this equilibrium equation showing the relationship between kb and concentration of the species involved, we have that;

kb = 4.47 × 10⁻⁴ = x² /0.25 - x.

x² +  4.47 × 10⁻⁴x - 1.1175  × 10⁻⁴ = 0.

Solving this quadratic equation gives us the value of x as 0.01035 M.

Thus, the concentration of [CH₃NH₂] = 0.25 M - 0.01035 M = 0.23965 M

The equilibrium concentration of [CH₃NH₂] = 0.23965 M.

The equilibrium concentration of CH₃NH₃⁺ and  OH⁻ =  0.01035 M respectively.

Answer:

a) common ion effect

b) solubility

c) saturated solution

d) solubility product constant

e) molar solubility

Explanation:

When a substance, say BA2 is dissolved in a solution and another substance CA2 is dissolved in the same solution. The solubility of BA2 is decreased due to the addition of CA2. This is known as common ion effect.

The mass of a substance that will dissolve in a given Volume of solvent is known as it's solubility.

The molar solubility is the amount of moles of solvent that dissolves in 1 dm^3 of solvent.

A solution that contains just as much solute as it can normally hold at a given temperature is known as a saturated solution.

Lastly, the product of molar solubilites raised to the power of the molar coefficient is know as the solubility product constant.

The correct matches and their explanation are:

a) A decrease in the solubility of an ionic compound as a result of the addition of a common ion: Option 4. common ion effect

b) The mass of salt in grams that will dissolve in 100 mL of water: Option 1. solubility

c) A solution that has dissolved the maximum amount of a compound at a given temperature. Any further addition of salt will remain undissolved: Option 5. saturated solution

d)  The product of the molarities of the dissolved ions, raised to a power equal to the ion's coefficient in the balanced chemical equation: Option 3. solubility product constant

e) The maximum number of moles of a salt that will dissolve in 1 L of solution: Option 2. molar solubility

To learn more about molar solubility and common ion effect follow the link:

https://brainly.com/question/14782973

Answer: 600 mL

Explanation:

Given that;

M₁ = 5.85 m

M₂ = 1.95 m

V₁ = 200 mL

V₂ = ?

Now from the dilution law;

M₁V₁ = M₂V₂

so we substitute

5.85 × 200 = 1.95 × V₂

1170 = 1.95V₂

V₂ = 1170 / 1.95

V₂ = 600 mL

Therefore final volume is 600 mL

Answer:

10.)Weight and mass are different because only weight describes the force of gravity on an object.

11.)On a planet with more mass than earth your weight would be higher because greater gravitational pull.

On a planet with less mass than earth your weight would be less because of the lower gravitational pull.

Explanation:

Answer: it is B

Explanation:

Answer:

[tex]Y=75.6\%[/tex]

Explanation:

Hello.

In this case, since no information about the reacting hydrogen is given, we can assume that it completely react with the 28.0 g of acetylene to yield ethane. In such a way, via the 1:1 mole ratio between acetylene (molar mass = 26 g/mol) and ethane (molar mass = 30 g/mol), we compute the yielded grams, or the theoretical yield of ethane as shown below:

[tex]m_{C_2H_6}^{theoretical}=28.0gC_2H_2*\frac{1molC_2H_2}{26gC_2H_2}*\frac{1molC_2H_6}{1molC_2H_2} *\frac{30gC_2H_6}{1molC_2H_6}\\ \\m_{C_2H_6}^{theoretical}=32.3gC_2H_6[/tex]

Hence, by knowing that the percent yield is computed via the actual yield (24.5 g) over the theoretical yield, we obtain:

[tex]Y=\frac{24.5g}{32.3g}*100\%\\ \\Y=75.6\%[/tex]

Best regards.

Answer:

homogeneous is consisting a part of or people are similar to each other or are if same type.

Answer:

A catalytic converter changes nitrogen dioxide to nitrogen gas and oxygen gas is a chemical change.

Explanation:

Hello.

In this case, since physical changes do not modify the molecular composition and structure of the material undergoing it whereas the chemical change does, for catalytic converters we should know they promote chemical reaction in which the composition is changed; for instance, for the given example, the following chemical reaction is the evidence:

[tex]2NO_2\rightarrow N_2+O_2[/tex]

As you can see, nitrogen and oxygen are no longer bonded but separated by themselves, therefore, this is a chemical change.

Best regards.

Answer:

All of them are organic compounds which have carbon as their main atom in the structure.

Explanation:

Hello.

In this case, since organic chemistry is the study of all the compounds having the carbon atom as their main atom, all the vegetables, animals, an in general, living things are composed by lipids, proteins, and other organic substances with this feature. Moreover, wood-based materials are mainly composed by lignin which is an organic polymer also having carbon as the main atom. In addition, oil and gasoline are organic chemical compounds with a lot of applications in daily life which also contain carbon atoms in their structure.

In such a way, a celery, a wooden spoon, and oil/gasoline have the carbon atom in common as their main atom in their chemical structures.

Best regards.

Answer:

Is like for solving for the solution for both equations??

Answer:

α-iron (BCC) has faster diffusion rate because of lower values in activation energy and pre-exponential value.

Explanation:

Taking each parameters or data at a time, we can determine the values/a constant for each parameters in the diffusion coefficient equation.

For α-iron (BCC), the diffusion coefficient = pre-exponential value,Ao × e^( -Activation energy,AE)/gas constant,R × Temperature.

Converting the given Temperature, that is 900°C to Kelvin which is equals to 1173.15K.

For α-iron (BCC), the pre-exponential value, Ao = 1.1 × 10^-6, and the activation energy, AE = 87400.

Thus, we have that the diffusion coefficient = 1.1 × 10^-6 × e(-87400)/1173.15 × 8.31.

Diffusion coefficient for α-iron (BCC) = 1.41 × 10^-10 m^2/s.

Also, For the γ-iron (FCC), the pre-exponential value, Ao = 2.3 × 10^-5 and the activation energy, AE = 148,00.

From these values we can see that both the exponential value, Ao and the activation energy for γ-iron (FCC) are higher than that of α-iron (BCC).

Thus, the diffusion coefficient for the γ-iron (FCC) = 2.3 × 10^-5 × e ^-(14800)/8.31 × 1173.15.

Then, the diffusion coefficient for the γ-iron (FCC) = 5.87 × 10^-12 m2/s.

Therefore, there will be faster diffusion in α-iron (BCC) because of lower activation energy and vice versa.

Answer:

A. the rock on the right is foliated

Explanation:

because if you look at the image then you see that the rock is arranged in layers so you can see that it is a foliated rock and also I got it right on my quiz

HOPE IT HELPS!!!

Answer: it would release heat because the thermal energy it absorbed to become a gas. so it would release heat. hope this helps :)

Explanation: