How to find the number of atoms?

Answers

Answer 1

To find the number of atoms, we multiple the number of mols by Avogadro's number, about 6.02x10^23

Mark Brainliest!

Answer 2

Answer:

to calculate the numbers of atoms in a sample, divide it's weight in grams by the amu atomic mass from the periodic table, then multiply the result by avogadro's number: 6.0 × 10^24


Related Questions

A train in Japan can travel 813.5 miles in 5 hours

Answers

Answer:

162.7miles/hr

Explanation:

Given parameters:

Distance covered by the train  = 813.5miles

Time taken  = 5hours

Unknown:

Speed of the train  = ?

Solution:

Speed is a physical quantity.

It is mathematically expressed as;

      Speed  = [tex]\frac{distance}{time}[/tex]

So, input parameters and solve;

   Speed  = [tex]\frac{813.5}{5}[/tex]  = 162.7miles/hr

Round the value 44.981

Answers

Answer: 45

Explanation: it would be 45 bc if the value is 5 and over the number goes up and if it is lower than 5 it would stay the same.

Answer:

45 is the answer

Explanation:

Convert each of the following masses to the units requested.
a. 0.765g to kilograms
b. 1.34 g to milligrams
c. 34.2mg to grams

Answers

Answer:

a) 0.000765kg

b) 1340mg

c) 0.0342g

Explanation:

a) 1000g = 1kg

0.765g= 0.765/ 1000

= 0.000765g

b) 1g = 1000mg

1.34g = 1.34 × 1000

= 1340mg

c) 1000mg = 1g

34.2mg = 34.2/1000

= 0.0342g

What information does a subscript in a chemical formula provide? Choose all that apply. * The charge of that atom while in the compound How many of each atom are present in the compound How many valence electrons each element has while in the compound How many valence electrons each element starts with In ionic, the simplified ratio of atoms in relation to each other

Answers

Answer:

B. How many of each atom are present in the compound

D. the simplified ratio of atoms in relation to each other

Explanation:

In a chemical formula, chemical elements or atoms are represented by a chemical symbol for example Fe for iron and Na for sodium, and the number of each atom is represented by a subscript such as CO2, where 2 is a subscript representing 2 atoms of oxygen.

A subscript represents the number of each atom in the compound and the simplified ratio of atoms in relation to each other. The simplified ratio of atoms in relation to each other means subscript shows the contribution of both the atoms in the compound, for example: N2 + 3H2 => 2NH3, it means the subscript showing the ratio or proportionate of atoms that is 2:2 for both nitrogen and hydrogen.

The subscript is always written below and to the right of the chemical symbol.

Hence, the correct answer is "B. How many of each atom are present in the compound and D. the simplified ratio of atoms in relation to each other"

You will learn in this course that organic compounds have covalent bonds with a significant amount of energy stored in them. This is why we burn fossil fuels to generate energy to heat our homes or drive our cars. Given this information, which of the compounds listed below would you expect to have the most energy is its carbon-carbon bond?

Answers

Answer:

See explanation

Explanation:

This question is obviously supposed to be a multiple choice question but the options are missing.

However, the question intends to test the student's knowledge about combustion of fossil fuels. Fossil fuels are mostly composed of hydrocarbons of different chain lengths.

The longer the chain length, the greater the energy released when the compound is burnt since there are more energy stored in its bonds.

Hence, the correct answer to this question will be the option that contains the greatest number of C-C and C-H bonds.

What is the ratio of aluminum atoms to oxygen atoms in aluminum oxide?​

Answers

Answer:

Al2 O3 or 2:3

Explanation:

The aluminum oxide consists of two elements, which are oxygen atoms and aluminum atoms, and there are 2 aluminum atoms and 3 oxygen atoms in aluminum oxide. The ratio from aluminum atoms to oxygen atoms is 2:3.

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, the ratio of aluminum atoms to oxygen atoms in aluminum oxide is  2:3.

What is chemical Compound?

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

An ionic compound is a metal and nonmetal combined compound.  Ionic compound are very hard. They have high melting and boiling point because of strong ion bond. The ratio of aluminum atoms to oxygen atoms in aluminum oxide is  2:3. Aluminium oxide is an ionic compound.

Therefore, the ratio of aluminum atoms to oxygen atoms in aluminum oxide is  2:3.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ6

where is lithium used in the body?

Answers

Answer:

Lithium is a naturally occurring alkali metal, which living organisms ingest from dietary sources and which is also present in trace amounts in the human body. In much higher concentrations, lithium is effective as a medication for mania and mood swings including manic depressive disorders

How do minerals differ from ores?

Answers

Ores: metal/coal (iron, gold, coal)

Mineral: not metal, (Granite, limestone,

1. What is the difference between mineral, ore and rock? Minerals are naturally occurring inorganic solids with a crystalline structure and a definite range of chemical formula. Ores are concentrations of minerals in rock that are high enough to be economically extracted for use.

Describe the transmission of sound through solids,liquids,and gases.​

Answers

I tihink it will help you

Calculate the volume in milliliters of a 5.05-g sample of a solid with a density of 3.25 g/mL.

Answers

Answer:

The answer is 1.55 mL

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\ [/tex]

From the question

mass = 5.05 g

density = 3.25 g/mL

We have

[tex]volume = \frac{5.05}{3.25} \\ = 1.5538461...[/tex]

We have the final answer as

1.55 mL

Hope this helps you

Calculate the density of helium if a balloon with a capacity of 5.00 L holds 0.890 g.

Answers

Answer:

Explanation:

Density is m/V. Also, 1 liter = 1000 [tex]cm^3[/tex]. So, we get 0.890/(5*1000) = [tex]1.78*10^{-4}[/tex] g/cm^3. You can convert this to kg/m^3 as well by multiplying it by 10. Depends which one you want.

The ratio of the mass in grams and volume in cubic meters gives the density. The density of 0.80 gm helium is 1.78 × 10 ⁻⁴ g/cm³.

What is density?

Density is the amount or the number of entities that can be contained in an area. It is denoted by ρ and is calculated as,

Given,

Mass = 0.890 gm

Volume = 5000 cm³

ρ = Mass ÷ Volume

= 0.890 ÷ 5000

= 1.78 × 10 ⁻⁴ g/cm³

Therefore, 1.78 × 10 ⁻⁴ g/cm³ is the density of helium.

Learn more about density here:

https://brainly.com/question/1563196

#SPJ2

Students were investigating properties of matter, but wanted to make sure that when they tested these properties they had properties that would represent the matter they were testing specifically. The students claim that they are going to test intrinsic properties. What evidence and reasoning would you provide to justify this claim? (7 points)

Answers

Answer:

See explanation

Explanation:

An intrinsic property is a property that is internal, that is, it characterizes the substance under study. The possession of an intrinsic property depends on the nature of the substance. An intrinsic property does not depend on amount of substance but on the nature of the substance.

Examples of intrinsic properties include; Density. Solubility, Melting Point, Freezing Point, Boiling Point, Conductivity etc.

Intrinsic properties really represent the matter that is being studied. For instance, the boiling point of water will always be 100°c. No other liquid can boil exactly at that temperature. Hence, this intrinsic property can always be used to identify an unknown liquid as water.

The students were right, studying intrinsic properties accurately represent the matter that is being studied.

if atom X has 6 protons,6 neutrons and 6 electrons and aton Z has 6 protons,7neutrons and 6 electrons,atom x and atom z are isotopes of the element

Answers

the answer is 89! okay thank you

While designing his recording studio, Brian was trying to determine what type of surface he should use for his studio walls. He wanted to be able to produce clear, crisp, sound. So he needed a surface that wouldn't cause his music to echo. What type of surface should Brian use for his studio walls?

Answers

Answer: Acoustic Foam.

Explanation:

Acoustic Foam: This is a kind of material, which is commonly known as it called a Studio Foam, it has a kind of wedge or pyramid shape that plays a big role in absorbing sound. Brian would have to use acoustic foam by placing them round the walls and ceiling as this would stop any echoing sound and in return give a crisp and clear sound when music is been played it the studio.

I'd is 643461717 and password is dynamo​

Answers

is that for Zoom?
Step by step explanation:
is that for Zoom?

Answer:bet

Explanation:

i need help please!

asap

Answers

Answer:

Earth is pulling up on the book with a force of 4n i think

Explanation:

Which food molecules are outside of the tube

Answers

Answer:

Absorption

Explanation:

I think from Quizlet

A student has a container of sand and sugar. What characteristic could be used to separate the mixture?​

Answers

Answer:

Sugar will dissolve, so water.

Explanation:

Sugar is a bicubacle food source you could say, sand will not evaporate or dissolve in the water since it is not a 3c2e source. Using water will seperate them.

Answer: Heat

Explanation:

Because is you put water and sand in a container you can separated by boiling the water and all the water would evaporate and the sand would stay.

What are some things that uses oxygen

Answers

Answer:

Common uses of oxygen include production of steel, plastics and textiles, brazing, welding and cutting of steels and other metals, rocket propellant, oxygen therapy, and life support systems in aircraft, submarines, spaceflight and diving.

All the following are examples of selective breeding EXCEPT a wild dog that finds and mates with a domestic dog. neutering a horse that is particularly small for its breed. adding sheep from another country to the bloodline to help combat disease. purposely mating larger pigs to increase the amount of meat produced.

Answers

Answer:

A. a wild dog that finds and mates with a domestic dog.

Explanation:

which of the following is a state of matter ? particle,thermal,plasma, and diffuse ?

Answers

Answer:

a particle

Explanation:

matter takes up space, and particles take place in atoms

Answer:

plasma is a state of matter

An ideal sample weighing 1.28g at 127C (temp) and 1 atm has a volume of 0.250L. Determine the molar mass of the gas.

Answers

Answer:

Molar mass of gas = 160 g/mol

Explanation:

Given data:

Mass of sample gas = 1.28 g

Temperature of sample gas = 127°C (127+273 = 400K)

Pressure of sample gas = 1 atm

Volume of sample gas = 0.250 L

Molar mass of gas = ?

Solution:

Formula:

PV = nRT

R = general gas constant = 0.0821 atm.L/ mol.K

Now we will put the values in formula.

1 atm × 0.250 L = n × 0.0821 atm.L/ mol.K ×400K

0.250 L.atm   = n ×32.84atm.L/ mol

n = 0.250 L.atm/32.84atm.L/ mol

n = 0.008 mol

Molar mass of gas:

Number of moles = Mass/molar mass

0.008 mol = 1.28 g / molar mass

Molar mass = 1.28 g / 0.008 mol

Molar mass = 160 g/mol

Kinetic molecular theory states... (choose all that apply)

A. There is a chemical change when a solid melts to a liquid.
B. Particles that make up matter have kinetic energy.
C. Particles that make up matter are always in motion

Answers

I think it’s B hopefully

Help this is not that hard I think

Answers

Answer:

1,) True

2.) False

3.) A Moraine

Explanation:

Hope this helps

Please Mark As Brainliest

What is the process whereby scientists check each other’s work?
A. defining the audience
B. conferencing
C. peer reviewing
D. writing

Answers

Answer:

peer reviewing

Explanation:

Its peer reviewing because there peers and there reviewing eachothers work

The process whereby scientists check each other’s work is peer reviewing.

What is peer group?

Peer group are the groups of people of same age, same background with same interest.

In the peer reviewing process group of members will check, evaluate and correct each others work, which in turn help the members of the group to update their work.

Hence, option (c) is correct i.e. peer reviewing is the process whereby scientists check each other’s work.

To know more about peer group, visit the below link:

https://brainly.com/question/1849121

NEED HELP ASAP! BRAINLEST + THANKS!
if three electrons are available to fill three empty 6p atomic orbitals, how will the electrons be distributed in the three orbitals
a.) one electron in each orbital
b.)two electrons in one orbital, one in another, none in third
c.) three in one orbital, one in other two
d.) cannot be predicted, determined by random chance

Answers

Answer:

A) one electron in each orbital

Explanation:

Orbitals get electrons one at a time. If there are three electrons and three empty orbitals, then one electron will go into one orbital!

Why Hund's Rule is called maximum spin multiplicity rule?​

Answers

Answer:

The rule states that for a given electron configuration, the lowest energy term is the one with the greatest value of spin multiplicity. This implies that if two or more orbitals of equal energy are available, electrons will occupy them singly before filling them in pair

Explanation:

2. Ultraviolet radiation has a frequency of 6.8 x 10'5Hz. Calculate the energy, in
joules, of the photon.

Answers

Answer:

[tex]E=4.5\times 10^{-18}\ J[/tex]

Explanation:

It is given that, the frequency of Ultraviolet radiation is [tex]6.8\times 10^{15}\ Hz[/tex]

We need to find the energy of the photon. The formula for the energy of a photon is given by :

[tex]E=hf\\\\\text{Where h is Planck's constant}\\\\E=6.63\times 10^{-34}\times 6.8\times 10^{15}\\\\E=4.5\times 10^{-18}\ J[/tex]

So, the energy of the photon is [tex]4.5\times 10^{-18}\ J[/tex].

The half life of radon 222 is 3.824 days, how much time must pass of one fourth of a given amount of radon to remain?

Answers

Answer:

After 7.648 days, you will see one quarter.

Explanation:

1 → 0.5 → 0.25

Since half life of radon-222 is 3.824 days, you need twice this time to get one quarter at the end.

2 ⋅ 3.824 = 7.648 days.

What is the density of nitrogen gas if 0.256g occupies a volume of 100mL?

Answers

Answer:

The answer is 0.00256 g/mL

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

From the question we have

[tex]density = \frac{0.256}{100} \\ [/tex]

We have the final answer as

0.00256 g/mL

Hope this helps you

Other Questions
Can you guys help please!! Due very soon! Select the measurement with that represents the least amount of pressure.Select one:a. 3 atmb. 3.039 x 1013 Pac. 2.280 x 10^3 mm Hgd. 40 psi CAN YOU PLS ANSWER THIS QUICK!!! WHAT IS THE ANSWER TO THIS MATH EQUATION??? GEOMETRY/COLLEGE!!! 2.02 Language in King's letter please help (flvs) find the value of the height of the tree. Q5.Here are two fractions.7/5 and 5/7Work out which of the fractions is closer to 1You must show all your working. amino acids building blocks of wich class of macromuoleculces Help!!!Lines b and c are parallel.What is the measure of 26? How did the New York City community of Harlem become an exclusively African American neighborhood in the twenties? You deposit $900 in a savings account that earns a simple interest rate of 4.5% per year. You calculate you will earn $1215 in interest over 3 years. Is your answer reasonable? A. Yes; the interest will be much less than the total in the account B. No; the interest will be much less than the total in the account. C. No; the interest will be more than the total in the account. D. Yes; the interest will be more than the total in the account. Please someone answer for this question Question 18What economic problem do many Middle Eastern countries experience? analyze the paintings of paul cezanne HARTEQUIN what are the elements of art he using? what did Elle woods do in legally blonde to be a lawyer? (do not answer this) which expression means 8 less twice a number 8-2n2n-8 how to simplify 2a a Need ASAP HELP!How did the environments in North America affect the development ofAmerican Indian cultures in the period just before Europeans arrived?A. Cultures were prevented from developing advanced farmingtechniques.O B. Cultures were forced to learn how to survive in their uniqueregions.C. Cultures were isolated and were unable to trade with one another.D. Most cultures were forced to rely on hunting and gathering. WILL GIVE BRAINLIEST FOR CORRECT ANSWERWhich prototyping tool has a feature to turn your paper sketches into mockups?A. JustinmindB. MarvelC. OrigamiD. InVision Simplify the complex fraction. 8/5 divide by 6 3/4 * Modern monsters tend to be defined less by their thoughts than by how they appear