The number of protons, neutrons and the electrons in the Se²⁻ ion :
Protons = 34
Neutrons = 45
Electrons = 36
The atomic number of the selenium = 34
The number of Protons = 34
The number of Neutrons = 45
The number of Electrons = 34
The number of the electrons is exactly equals to the number of the protons for the neutral atom . In the Se²⁻ ion , the selenium gains the two electrons and forms the anion. The number of protons , number of neutrons and the number of the electrons Se²⁻ ion is as follows :
The number of Protons = 34
The number of Neutrons = 45
The number of Electrons = 36
To learn more about protons here
https://brainly.com/question/14671525
#SPJ4
relative abundance is the unit along the y-axis in a mass spectrum. what are the units on the x-axis?
The unit on the x-axis is m/z (mass/charge ratio).
The mass-to-charge ratio (m/z) is a physical quantity used in mass spectrometry to describe the size and composition of ions. In a mass spectrometer, ions are separated based on their m/z value, which is calculated as the ratio of the ion's mass to its charge.
The m/z value is a unique identifier for each ion, allowing scientists to identify and quantify individual components within a sample.
Mass spectrometry is an important tool in many fields, including chemistry, biology, and environmental science, where it is used to determine the molecular weight and chemical composition of substances.
Understanding the mass-to-charge ratio is critical to effectively interpret and use data obtained from a mass spectrometer.
Therefore, The unit on the x-axis is m/z (mass/charge ratio).
To know more about mass/charge ratio refer to:
brainly.com/question/482933
#SPJ4
he volume of the water in a graduated cylinder initially is 120.0 ml, and when the sphere is added the new volume is 135.8 ml. determine the volume of object 2, in ml, from the water displacement data.
The volume of Object 2 can be determined from the water displacement data by subtracting the initial volume of the water (120.0 mL) from the final volume after the sphere is added (135.8 mL). This gives us a difference of 15.8 mL, which is the volume of Object 2.
The chemical explanation for this procedure is that the volume of Object 2 is calculated by subtracting the initial volume of water from the final volume of water after the object is added. This is due to the fact that the volume of the object displaces the water, and so the amount of water displaced is equal to the volume of the object.
Learn more about chemical explanation:
https://brainly.com/question/28264019
#SPJ4
which reagent is classified as a strong nucleophile in addition to the carbonyl group of an aldehyde or ketone?
A strong nucleophile in addition to the carbonyl group of an aldehyde or ketone is an enolate ion.
An enolate ion is a negatively charged intermediate that forms when the alpha carbon of an aldehyde or ketone becomes protonated and deprotonated. This intermediate is a strong nucleophile and reacts readily with electrophiles. Enolate ions are key intermediates in aldol reactions and other reactions involving carbonyl compounds.
In general, strong nucleophiles are typically used in nucleophilic addition reactions with aldehydes and ketones to synthesize a wide range of organic compounds, including alcohols, amines, and carboxylic acids.
Learn more about Nucleophilic Addition here: https://brainly.com/question/4699407
#SPJ4
Lucite contain 59. 9 g C, 8. 06 g H,
and 32. 0 g O. You want to determine the empirical formula. How many mole of C are in the ample?
The number of moles of Carbon in the sample is 4.99 moles
How to calculate number of moles?The number of moles in a substance can be calculated by dividing the mass of the substance by its molar mass as follows:
moles = mass ÷ molar mass
According to this question, Lucite contain 59.9 g C, 8.06 g H, and 32.0 g O. The moles of C can be calculated as follows:
Molar mass of C = 12g/mol
moles = 59.9g ÷ 12g/mol
moles = 4.99 moles
Learn more about moles at: https://brainly.com/question/26416088
#SPJ1
For each of the following precipitation reactants, calculate how many grams of the first reactant are necessary to completely react with 18. 0 gram of the second reactant.
K2SO4(aq)+Sr(NO3)2(aq)--->>SrSO4(s)+2KNO3(aq)
29.2 grams of Potassium Sulfate are necessary to completely react with 18.0 grams of Sr(NO3)2.
The balanced chemical equation for the reaction between K2SO4 and Sr(NO3)2 is:
K2SO4 (aq) + Sr(NO3)2 (aq) -> SrSO4 (s) + 2KNO3 (aq)
To calculate the amount of K2SO4 needed to react with 18.0 grams of Sr(NO3)2, we need to use stoichiometry. From the balanced equation, we can see that 1 mole of Sr(NO3)2 reacts with 2 moles of K2SO4. To convert 18.0 grams of Sr(NO3)2 to moles, we use the molar mass:
(18.0 g Sr(NO3)2) / (214.0 g/mol Sr(NO3)2) = 0.084 mol Sr(NO3)2
Since 1 mole of Sr(NO3)2 reacts with 2 moles of K2SO4, then 0.084 moles of Sr(NO3)2 will react with 0.084 × 2 = 0.168 moles of K2SO4. To convert moles of K2SO4 to grams, we use the molar mass:
(0.168 mol K2SO4) × (174.3 g/mol K2SO4) = 29.2 g K2SO4
Therefore, 29.2 grams of K2SO4 are necessary to completely react with 18.0 grams of Sr(NO3)2.
Learn more about stoichiometry:
brainly.com/question/30215297
#SPJ4
if an insufficient amount of acid is added in step 9
To calculate the percentage of hydrogen peroxide in the used solution, the amount of hydrogen peroxide must be known.
Since the amount of water is a dependent variable and must remain constant over the course of each trial, it must be known.
Given equation: [tex]H2O2 - > O2 + 2H+ + 2e-[/tex]
[tex]MnO4- + 8H+ + 5e - > Mn2+ + 4H2O[/tex]
In our solution, hydrogen peroxide made up 3.075% on average. To calculate the ratio, we used the ideas of half-redox reactions and our understanding of stoichiometry. This is very similar to the real figure, 3%, that is listed on the bottle. The inaccurate % value is caused by the following sources of mistake. The ratio would become more equal. The volume would be reduced. Because of the altered mole ratio's increased oxygen requirement, it would be too high.
To learn more about hydrogen peroxide click here https://brainly.com/question/15363071
#SPJ4
complete question: If an insufficient amount of acid is added in step 9, some of the MnO4- ions will be reduced to MnO2 instead of to Mn2+. a. How would this change the mole ratio for the titration reaction? b. How would this affect the volume of KMnO4 solution needed to reach the endpoint? c. lf reduction to MnO2 were occurring but not being reflected in the calculations, would the calculated percent hydrogen peroxide be too high or too low as a result of this error?
Which one of these statements about formal charge is true? Formal charge is the same as oxidation number.
To draw the best Lewis structure, you should minimize formal charge. So correct option is (b).
Describe Formal Charge?Formal charge is a concept used in chemistry to assign an electrically charged value to individual atoms in a chemical species. It is calculated as the difference between the number of valence electrons in an isolated neutral atom and the number of electrons assigned to that atom in the actual species. The sum of formal charges in a neutral species must equal zero. Formal charge helps in determining the distribution of electrons in a molecule and aids in predicting chemical reactivity and stability.
Formal charge is a concept used in Lewis structures to help predict the distribution of electrons in a molecule. It is calculated as the difference between the number of valence electrons that an atom would have in an isolated state and the number of electrons assigned to it in the Lewis structure. Minimizing the formal charge in a Lewis structure helps to predict the most likely distribution of electrons in the molecule, and therefore the most likely arrangement of atoms. The other statements are incorrect.
To know more about Lewis structure visit:
https://brainly.com/question/30087363
#SPJ4
The Complete question is:
Which one of these statements about formal charge is true?
(a) Formal charge is the same as oxidation number.
(b) To draw the best Lewis structure, you should minimize formal charge.
(c) Formal charge takes into account the different electronegativities of the atoms in a molecule.
(d) Formal charge is most useful for ionic compounds.
(e) Formal charge is used in calculating the dipole moment of a diatomic molecule.
The density of solid ag is 10. 5 g/cm3. How many atoms are present per cubic centimeter (cm3) of ag?.
The number of atoms present per cubic centimeter (cm3) of solid Ag is approximately 6.023 x 10^23 atoms/cm3.
This is because the atomic weight of Ag is 107.87 g/mol and the density of solid Ag is 10.5 g/cm3.
This means that for every 107.87 grams, there are 6.023 x 10^23 atoms. To calculate the number of atoms per cm3, we divide this number by the volume occupied by 1 mole of Ag, which is 22.4 liters. This gives us 6.023 x 10^23 atoms/cm3.
Density is a physical property that measures the amount of matter contained in a given volume. It is defined as the ratio of mass to volume. Density is usually expressed in kilograms per cubic meter (kg/m3) or grams per cubic centimeter (g/cm3).
Learn more about density:
https://brainly.com/question/1354972
#SPJ4
A group of cows are eating grass in a field. What type of energy are they getting from the grass?
Answer:chemical drive
The chemical energy contained in the bonds between the atoms of the carbohydrates in the grass is consumed by the cow when it eats grass. The grass will be broken down within the calf to produce energy that is used to create ATP.
Explanation:
chemical drive
The chemical energy contained in the bonds between the atoms of the carbohydrates in the grass is consumed by the cow when it eats grass. The grass will be broken down within the calf to produce energy that is used to create ATP.
What changes the identity of an atom?
The thing which changes the identity of an atom is the by adding or removing the protons from the nucleus will changes the charge of the nucleus and it changes that the atom's atomic number.
The number of the protons in an atom is equals to the atomic number of the atom. So, by adding and removing the protons from the nucleus of atom will changes the charge of the nucleus and it changes that the atom's atomic number. The example is as : if we added a proton to the nucleus of the hydrogen atom and then it turns the helium atom.
Thus by changing the number of the protons in an atom , the atoms identity will changes.
To learn more about atom here
https://brainly.com/question/1383030
#SPJ4
Aspartame is an artificial sweetener, it
consists of the elements C, H, O and N.
The complete combustion of 0.001 mol of
aspartame gives 162 mg of water. Its per-
cent mass composition is given as: C: 57.1
%, H: 6.1 %, N: 9.5 %.
a) Calculate the percentage by mass of
oxygen.
b) Calculate the number of mole atoms of
H present in 1 molecule of aspartame.
Deduce the number of H atoms present
in 1 molecule of aspartame.
c) Determine the molecular formula of
aspartame.
Answer:
Explanation:
Aspartame⇒ C14H18N2O5
SO, the number of atoms of H contain in 1 molecule of Aspartame is 18.
1 mole of h = 1g
27.3= Oxygen percentage
Which of the following statements is the best example of a scientific conclusion?
A. A driver must use a turn signal when turning left.
B. Less force is used to make a small car go as fast as a large truck.
OC. In most states, the law requires you to wear a seat belt.
OD. Only people who pass a driver's test are qualified to drive.
answer: option (b) because this option refers to physics
Calculate ∆H for the reaction
CH4(g) + ½ O2(g) → CO(g) + 2 H2(g)
given the following data:
Equation ∆H (kJ)
CH4(g) + 2 O2(g) → CO2(g) + 2 H2O(g) -802
CH4(g) + CO2(g) → 2 CO(g) + 2 H2(g) 247
CH4(g) + H2O(g) → CO(g) + 3 H2(g) 206
Change in enthalpy for the following reaction: CH4(g)+2O2(g)→CO2(g)+2H2O(l) : ΔH = -899 kJ
Of the three ΔH known reactions we can combine to get ΔH unknown reactions
We add up the three reactions by first reversing and multiplying reaction 3 by the coefficient 2
1. CH4 (g) + O2 (g) → CH2O (g) + H2O (g), ΔH = -284 kJ
2. CH2O (g) + O2 (g) → CO2 (g) + H2O (g), ΔH = -527 kJ
3. 2H2O (g) → 2H2O (l), ΔH = -88.0 kJ
We remove CH2O (g) because it is left and right in the reaction so the sum of the three reactions becomes:
CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l) ΔH = -899 kJ
What is the change in enthalpy?
It is a state function used in many measurements in chemical, biological, and physical systems at constant pressure, conveniently provided by a large ambient atmosphere.The term pressure-volume expresses the work required to create the physical dimensions of a system, i.e. to create space for it by moving its surroundings.To know more about change in enthalpy, click the link given below:
https://brainly.com/question/29556033
#SPJ4
when a hydrogen ion (h ) is in water it forms a hydronium ion (h3o ).
When a hydrogen ion (H⁺ ) is in water it forms a hydronium ion (H₃O⁺ ). The correct option is 1) True . This statement is true.
The hydrogen ion , H⁺ present in the water will make a bond with the water ( H₂O) molecule in the solution and forms the hydronium ion , (H₃O⁺ ). This is is due to the reason that the hydrogen ions do not exist in the aqueous solution. It will take part in the formation of the hydronium ion.
Thus, the statement is true that the hydrogen ion (H⁺ ) is in water it forms a hydronium ion (H₃O⁺ ).
This question is incomplete, the complete question is :
When a hydrogen ion (H⁺ ) is in water it forms a hydronium ion (H₃O⁺ ). This statement is:
1) True
2) False.
To learn more about hydrogen ion here
https://brainly.com/question/2930492
#SPJ4
using the reagents below list in orderprepapre cyclopentene from pentane
d, b, f.
The steps to prepare 1-butanol from 1-chlorobutane are as follows:
Hydroboration (d): 1-chlorobutane is reacted with BH₃ in THF to add a boron atom and a hydroxyl group to the carbon chain, forming 1-butanol.
Hydroxide (b): The intermediate produced from step 1 is then reacted with a hydroxide ion to eliminate the boron atom and form the final product, 1-butanol.
Ammonium nitrate (f): The intermediate produced in step 2 is then reacted with ammonium nitrate to form a nitrate ester, which is a common precursor to 1-butanol.
What is a hydroboration?Hydroboration is a chemical reaction in which boron atoms are added to an unsaturated organic compound, such as an alkene or alkyne. The reaction is typically performed using a boron reagent, such as diborane (B₂H₆), and is facilitated by a reducing agent, such as a tertiary amine. The resulting boron-containing intermediate can be further functionalized or transformed into a variety of organic compounds.
Hydroboration is commonly used in organic synthesis as a way to add a hydroxyl group to an alkene or alkyne, or to introduce a boron atom into a molecule, which can then be used as a handle for further transformations. The reaction is often performed in the presence of a stabilizing solvent, such as THF, which helps to prevent the highly reactive boron species from decomposing before the reaction is complete.
To know more about reducing agent, visit:
https://brainly.com/question/10547418
#SPJ4
The complete question is as follows:
The reagents below list in orderprepapre cyclopentene from pentane are:
1. Sodium, 2. Bromine, 3. Aluminum chloride, 4. Sulfuric acid.
What is reagents?
Reagents are substances that are used as a starting material for a chemical reaction. They are typically used to convert an initial substance into a product. Reagents can be either organic (derived from a natural source) or inorganic (made from a synthetic source). Reagents can be either in a solid, liquid, or gaseous form and can be used in a variety of applications across industries such as laboratory research, manufacturing, and medical diagnostics. Reagents are used to control the rate and direction of a reaction, as well as the purity and yield of the product.
1. Pentane + Sodium → Sodium pentane
2. Bromine + Sodium pentane → 2-bromopentane
3. 2-bromopentane + Aluminum chloride → 2-chloropentane
4. 2-chloropentane + Sulfuric acid → Cyclopentene
To learn more about reagents
https://brainly.com/question/26905271
#SPJ4
At what temperature will a 1 m aqueous solution boil if the solute’s Kb is 4°c/m?
ΔTb = Kbm
Tsolution = Tsolvent + ΔTb
A. -4°c
B. 400°c
C. 104°c
D. 96°c
At 104°C temperature will a 1 m aqueous solution boil if the solute’s Kb is 4°C/m.
The Kb values of the solvent and the solute can be used to calculate the boiling point of a 1 m aqueous solution of KCl. Aqueous denotes the presence of water in the solution. Due to the solute's presence, a solution's boiling point rises above the boiling point of the pure solvent. The concentration of the solute and the solvent's Kb value can be used to compute the boiling point elevation, Tb:
ΔTb = Kb × molality
where molality is the concentration of the solute in moles per kilogram of solvent. The molality of the solution can be calculated from its concentration in moles per liter:
molality = moles of solute / mass of solvent in kg
The mass of 1 L of water is approximately 1 kg. So, the molality of the solution is 1 m. The boiling point elevation due to the solute is:
ΔTb = Kb × molality = 4 × 1 = 4°C
The boiling point elevation due to the solvent is:
ΔTb = Kb × molality = 0.512 × 1 = 0.512°C
The boiling point of the solution is the boiling point of the pure solvent plus the boiling point elevations due to both the solute and the solvent:
Tb = Tb, pure solvent + ΔTb, solute + ΔTb, solvent
The boiling point of pure water is 100°C. So, the boiling point of the 1 m aqueous solution of KCl is:
Tb = 100 + 4 + 0.512 = 104.512°C
Learn more about aqueous solution:
brainly.com/question/26856926
#SPJ4
What is the empirical formula for a compound that contains 82.66% C and 17.34% H.
The empirical formula for a compound that contains 82.66% C and 17.34% H is [tex]C_{2}H_{5}[/tex].
The empirical formula of a compound represents the simplest whole-number ratio of elements in the compound. To find the empirical formula from the percentage composition, we need to convert the percentages to masses and then to moles.
First, we can calculate the mass of each element in a 100 gram sample of the compound:
Mass of C = 82.66 g C / 100 g sample = 0.8266 g C
Mass of H = 17.34 g H / 100 g sample = 0.1734 g H
Next, we convert the masses to moles:
Moles of C = 0.8266 g / 12.01 g/mol = 0.0686 mol
Moles of H = 0.1734 g / 1.01 g/mol = 0.1717 mol
Finally, we divide each moles value by the smallest moles value to get the simplest whole number ratio of the elements:
Moles of C / 0.0686 mol = 1
Moles of H / 0.0686 mol = 2.5
Therefore, The empirical formula for a compound that contains 82.66% C and 17.34% H is [tex]C_{2}H_{5}[/tex].
To know more about empirical formula refer to:
brainly.com/question/14044066
#SPJ4
Need help on question 53
What is Iron II Oxide?
Iron II oxide, also known as ferrous oxide, is a chemical compound with the formula FeO. It is a black or brown solid that occurs naturally as the mineral wüstite. FeO is an intermediate in the extraction of iron from iron ore and is also used as a raw material in various industrial processes.
What are the uses of Iron II oxide?
Iron II oxide (FeO) has various industrial uses. It is used in the production of iron and steel, as a raw material in the production of pig iron, in the manufacture of ferromagnetic alloys, and as a catalyst in the synthesis of chemicals.
FeO is also used as a refractory material in high-temperature industrial processes, as well as in the production of ceramics and glass. It is also used as a pigment in the ceramics and glass industries, as well as in the production of magnetic inks for audio and video tapes.
To learn more about Iron II oxide, visit: https://brainly.com/question/14143857
#SPJ4
Ambien is a sedative used in the treatment of insomnia. It was discovered in 1982 and brought to market in 1992 (it takes a long time for new drugs to undergo the extensive testing required to receive approval from the Food and Drug Administration). Identify the hybridization state and geometry of each carbon atom in the structure of this compound.
Geometry of the structure:
All sp² are trigonal planar
All sp³ are tetrahedron
What is geometry?
Points are generally considered the basic objects for construction geometry. They may be defined by the properties they must have, as in Euclid's definition as "that which has no part", or in synthetic geometry. In modern mathematics, they are generally defined as elements of a set called a space, which is itself axiomatically defined.To know more about geometry, click the link given below:
https://brainly.com/question/12796779
#SPJ4
The hybridization state of each carbon atom in the structure of Ambien is sp3, and the geometry of each carbon atom is tetrahedral.
What is hybridization?
Hybridization is the process of combining two or more distinct entities to create an entirely new entity. It is a process which is used in many fields such as biology, genetics, engineering, and computing. In biology, hybridization is the cross-breeding of two organisms from different species, or the mating of two organisms with different genetic make-ups. In genetics, hybridization is when two different strands of DNA are combined through splicing, recombination, or other forms of synthesis.
sp3 hybridization occurs when a carbon atom bonds with four other atoms or groups of atoms. Each of the four bonds is composed of one sigma bond (formed by the overlap of two sp3 orbitals) and one pi bond (formed by the overlap of two p orbitals). This arrangement of orbitals around the carbon atom forms a tetrahedral geometry, with a bond angle of 109.5°.
To learn more about hybridization
https://brainly.com/question/15088849
#SPJ4
I need help on this please
Lots of precipitation, ocean water evaporation and water freezing increases salinity. Equator area, poles area, water thawing and river dumping into ocean decreases salinity.
What is salinity?Based on its saltiness, salted ice forms at a certain temperature. More salty water takes longer to freeze than less saline water does. The boiling point of a salty solution is greater than that of fresh water. Due to its impact on salinity, evaporation is also lower over more salinized water than over less salinized water. Saline seawater has a higher density than freshwater.
The overwhelming bulk of oceanic salinity is found in coastal seas. Salts are brought into solution by rivers from continental regions. It's interesting to note how differently sea salt as well as freshwater salt are made. Lots of precipitation, ocean water evaporation and water freezing increases salinity. Equator area, poles area, water thawing and river dumping into ocean decreases salinity.
Therefore, lots of precipitation, ocean water evaporation and water freezing increases salinity.
To learn more about salinity, here:
https://brainly.com/question/14575146
#SPJ1
What is the osmotic pressure of a 1.4 M aqueous solution of glycerin in water at 47°c? Report your answer in atm and round to the second decimal place. Glycerin=C3H5(OH)3
The osmotic pressure of the 1.4 M aqueous solution of glycerin in the water at 47 °C is 36.73 atm.
The molarity of the solution = 1.4 M
The temperature of the solution = 47 °C = 320 K
The osmotic pressure is expressed as :
Osmotic pressure = M R T
where,
M = molarity = 1.4 M
R = constant = 0.082 atm L / mol K
T = temperature = 320 K
By solving the values , we get :
Osmotic pressure = M R T
Osmotic pressure = 1.4 × 0.082 × 320
Osmotic pressure = 36.73 atm
Thus, the osmotic pressure is 36.73 atm.
To learn more about osmotic pressure here
https://brainly.com/question/29463405
#SPJ4
Heat that flows by conduction is the transfer of thermal energy between substances in contact. What must occur for this to happen? The two systems must be the same temperature. The two systems must not be touching each another. One system must have higher kinetic energy than the other system. The thermal energy of one system must be the same as the thermal energy of the other system. Mark this and return
The thermal energy of one system must be the same as the thermal energy of the other system. Therefore, the correct option is option D.
What is conduction?A pan heats up when you place it on the flame. It's because heat is transferred from the burner to the pan. Additionally, it allows any other utensil or pan to heat up. But after a while, the vessel cools down when you remove it from the heat. It happens because the vessel's heat is dissipated onto the surrounding area. It enables the vessel to cool.
Heat that flows by conduction is the transfer of thermal energy between substances in contact. The thermal energy of one system must be the same as the thermal energy of the other system.
Therefore, the correct option is option D.
To learn more about conduction, here:
https://brainly.com/question/15085692
#SPJ1
A 30 mº tank contains 14 m3 of liquid n-butane in equilibrium with its vapor at 25°C Estimate the mass of n-butane vapor in the tank. The vapor pressure of n-butane at the given temperature is 2.43 bar. The characteristic properties of n-butane are given in the following table: Molar mass T/K Pc/bar Zo cm molt T./K 1-Butane 58.123 0.200 425.1 37.96 0.274 255 2727 The values of Rare given in the following table: Values of the Universal Gas Constant R = 8.314 Jmol K-' = 8.314 mn® Pumol-K! 83.14 cm bar mol"'*'-8314 cm.Pamol - 82.06 cm (atm) mol. 62,356 cm (tor) mol 1.987 (cal) mot K - 1.986 (Btu)(tb mol)(R)! 0.7302 (t)" (atm) (Ib mol)"(R) 10.73 ()" (pnia) (Ib mol)" (R)" 1545 (A) (1) (tb mol) (R) The mass of n-butane vapor in the tank is kg
Mass of n-butane is 72.008kg and the moles is 3.7.
This question requires the use of the ideal gas law and the information given in the problem to determine the mass of n-butane vapor in the tank. The Ideal Gas Law is a fundamental equation used in physics and engineering to describe the behavior of an ideal gas, which is a theoretical type of gas that consists of large numbers of point-like particles with no intermolecular interactions. The law states that the pressure, volume, and temperature of an ideal gas are directly proportional to each other. It is expressed where P is pressure, V is volume, n is the number of moles of the gas, R is the universal gas constant, and T is the temperature in Kelvin. The Ideal Gas Law is widely used in various fields, including thermodynamics, atmospheric science, and combustion engineering. To solve this, you would first need to calculate the number of moles of n-butane in the tank using the volume and ideal gas law. Then, you would use the molar mass of n-butane to convert the number of moles to mass in kilograms.
Learn more about Ideal gas law:
brainly.com/question/28257995
#SPJ4
carbon and oxygen form compuds called carbon monoxide and carbon dioxide and form a ------------ ion called carbonate
Carbon and Oxygen form compounds called carbon monoxide and carbon dioxide and form a CO3-2 ion called carbonate.
Its structure is a trigonal planar arrangement of three oxygen atoms surrounding a carbon atom. As seen here, the carbonate ion's Lewis structure contains two single bonds to the neutral oxygen atom and two double bonds to the negative oxygen atom. Using Carbonate, In washing detergents, carbonates like potassium and sodium carbonates are used, water softening method, utilised as raw materials to create papers, used in the production of glass. Carbonate, with the chemical formula CO32-, is a salt of carbonic acid. Alkali and alkaline earth metals make up the majority of the elements required to make carbonates.
To know more about carbon and oxygen click here:
brainly.com/question/14833281
#SPJ4
What is nitrogen monoxide formula?
NO is nitrogen monoxide formula .
What are compounds ?
A compound is a substance consisting of two or more elements chemically combined in a fixed ratio. They differ from mixtures consisting of two or more substances physically mixed without chemical bonding. Compounds have their own physical and chemical properties that differ from those of individual elements. For example, the compound water (H2O) has different properties (boiling point, density, solubility, etc.) than its components hydrogen (H2) and oxygen (O2).
Compounds are formed by chemical reactions in which atoms of different elements combine to form new substances. The formation of a compound can be represented by a chemical formula that indicates the type and number of atoms in the compound.
To know more about compounds , click the link below ;
https://brainly.com/question/26487468
#SPJ4
living conditions for miners in the congo have improved because of the global demand for coltan, which is used in cell phones and other electronics.
It is unclear if the statement "living conditions for miners in the Congo have improved because of the global demand for coltan, which is used in cell phones and other electronics" is entirely accurate.
The mining sector in the Democratic Republic of the Congo has come under fire for the mistreatment of miners, including the use of child labour, low pay, and dangerous working conditions. Even while there may have been some progress in some areas, it's still vital to look at the big picture and not just one particular commodity when assessing the well-being of miners. In addition, local communities have frequently not benefited economically from coltan mining; instead, transnational firms and dishonest government officials have monopolised this industry. To completely comprehend the effects of coltan mining on the living circumstances of miners in the Congo, additional study is required.
Learn more about coltan:
brainly.com/question/10107410
#SPJ4
Select all intermolecular forces that contribute to creating a solution of HCl in CH3CN.
Group of answer choices
O London Dispersion
O Dipole-dipole
O H-bonding
Dipole-dipole and London dispersion forces are the two intermolecular interactions found in HCl in CH₃CN. The dipole-dipole forces are stronger of the two. The H-Cl bond dipole is what creates the dipole-dipole forces (as Cl is more electronegative than H) (option 1 & 2)
A polar molecule is CH₃CN. Dipole-dipole interaction is the intermolecular force at work in this molecule. This molecule does not have any hydrogen bonds, and dipole-dipole interactions are weaker than hydrogen bonds.
Because the chlorine atom has a tiny negative charge and the hydrogen atom has a slight positive charge, HCl molecules, for instance, have a dipole moment. There is a tiny dipole-dipole force of attraction between nearby HCl molecules as a result of the force of attraction between oppositely charged particles.
Learn more about dipole-dipole interaction here: https://brainly.com/question/11828970
#SPJ4
what is the mass percent of n in ammonium phosphate?
The mass percentage of Nitrogen in Ammonium Phosphate = 28.18 % Hope this information clarifies your doubts about the topic.
The mass percent of the N in ammonium phosphate is 28.1 %.
The formula of the compound Ammonium phosphate is (NH₄)₃PO₄.
The molar mass of the compound , (NH₄)₃PO₄ = 149 g/mol
The mass percent formula is as follows :
The mass percent =(mass of the element / mass of the compound) × 100%
where,
The mass of the nitrogen = 14 g/mol
The mass of the compound = 149 g/mol
The number of the nitrogen atom = 3
The mass percent = ( 3 × 14 / 149 ) × 100 %
The mass percent = 28.1 %
Thus, the mass percent of Nitrogen is 28.1 %.
To learn more about mass percent here
https://brainly.com/question/3239414
#SPJ4
if 65.5 mol 65.5 mol of an ideal gas is at 2.97 atm 2.97 atm at 22.60 ∘c, 22.60 ∘ c, what is the volume of the gas?
If the 65.5 mole of an ideal gas is at the 2.97 atm at 22.60 °C, the volume of the gas is 5365.2 L.
The number of moles of gas = 65.5 mol
The pressure of the gas = 2.97 atm
The temperature of the gas = 22.60 °C = 295.6 K
the ideal gas equation is expressed as :
P V = n R T
V = n R T / P
where,
P = 2.97 atm
n = 65.5 mol
T = 295.6 K
R = 0.823 atm L/mol K
V = ( 65.5 × 0.823 × 295.6 ) / 2.97
V = 5365.2 L
Thus, the volume of the gas is 5365.2 L
To learn more about volume here
https://brainly.com/question/4268476
#SPJ4