Answer:
2.7 moles of neon contain 16.3 × 10²³ atoms of neon.
Explanation:
Given data:
Number of moles of neon = 2.7 mol
Number of atoms of neon = ?
Solution:
We will use using Avogadro number to solve given problem.
"It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance"
The number 6.022 × 10²³ is called Avogadro number.
1 mole of neon = 6.022 × 10²³ atoms of neon
2.7 mole of neon × 6.022 × 10²³ atoms of neon / 1 mole of neon
16.3 × 10²³ atoms of neon
Thus, 2.7 moles of neon contain 16.3 × 10²³ atoms of neon.
Lithium (Li) and oxygen (O) are both in period 2. They both have _____.
the same number of protons
two electron shells
the same number of electrons
similar properties
Answer:
So Lithium (Li) and Oxygen (O) are both have two electron shells
Explanation:
Answer:
Lithium (Li) and oxygen (O) both have two electron shells.
Explanation:
Answered correct on my test.
Also I'm aware you asked this around 4 months ago although I still wanted to answer so those who may need an answer in the future can reflect on this response and get the correct answer they deserve. Thanks! Happy New Year everyone. <3
Please hurry up and help me my teacher needs the answer NOW!
Answer:
3+(10G)=DG
ER_K5(O5G)+29K
Help me please !!!
Which of the following can be inferred from the diagram above that shows the dependence of potential Energy on the Internuclear distance between two atoms?
A)The atoms form a bond with a bond length of 25 pm
B)The atoms form a bond with a bond length of 75 pm
с)The net force between the atoms is attractive at 25 pm
D)The net force between the atoms is attractive at 75 pm
Answer:
Its B. The atoms form a bond with a bond lenth of 75 pm
What is the charge on an electron?
Answer
1.60217662 × 10-19 coulombs
Explanation:
.
Explain how errors in measurements can affect the safety of products?
Answer:
Its can affect the safety of products by, for example, if you put raw chicken in the oven and don't cook it for long enough, it can make you sick
Explanation:
The difference between the calculated and precise worth is referred to as an error or defect. For example, if the two machinists use the same device to detect measurement mistakes, it is not necessary that they obtain the same results. However, there will be a little difference between the two measurements, which is referred to as an error.
1. A student in lab measures 4.6 grams of copper for an experiment. Upon further analysis he determines that he should have measured out 4.7 grams of copper. What is his percent error?
Answer:
[tex]2.13\%[/tex]
Explanation:
Quantity of copper measured by a student = 4.6 grams
Original quantity of copper = 4.7 grams
Error in measurement = Original quantity of copper - Quantity of copper measured by a student [tex]=4.7-4.6=0.1[/tex] grams
To find the percent error, apply the following formula:
Percent error = (Error in measurement / Original quantity of copper) × 100
[tex]=\frac{0.1}{4.7}(100)=2.13\%[/tex]
What is the correct electron-dot formula for Sulfur?
.......................................................
A sample of pure lithium nitrate contains 10.1% lithium by mass. What is the % lithium by mass in a sample of pure lithium carbonate that has twice the mass of the frost sample?
The % lithium by mass in a sample of pure lithium carbonate : 18.79%
Further explanationProust states the Comparative Law that compounds are formed from elements with the same Mass Comparison so that compounds have a fixed composition of elements
% Lithium (Li) in Li₂CO₃(lithium carbonate) will remain the same even if the mass amount of Li₂CO₃ changes
Ar of Li = 6.941 g/mol
MW of Li₂CO₃ = 73.891 g/mol
[tex]\tt \%Li=\dfrac{2.Ar~Li}{MW~Li_2CO_3}\times 100\%\\\\\5Li=\dfrac{2\times 6.941}{73.891} \times 100\%=18.79\%[/tex]
Why might it be important to test one variable at a time when doing an experiment?
Answer:
If you change everything at once, you may not know what caused the end result.
Explanation:
If you have Variable A (Salt), Variable B (Potassium), and the Control of Water, you might mix everything together, so you mix salt, potassium and water together. It is known that Potassium reacts very aggressively in water, but since you mixed everything together, you might think that salt+potassium+water goes boom, while it is actually potassium+water=boom.
the energy of motion is called
Answer:I think it’s mechanical energy
Explanation:
What are the characteristics of metals vs. non metals?
Answer:In the picture
Explanation: None
how do birds fly in the south
Answer:
with there wings
Explanation:
birds have wings that flap up and down when they fly and this process repeats over and over
3. The manipulation of living organisms to produce desired products or results is known as...
a. Sustainability
b. Biotic Factor
c. Biotechnology
d. Abiotic Factor
Answer:
C. Biotechnology
Explanation:
In its broadest definition, biotechnology is the application of biological techniques and engineered organisms to make products or modify plants and animals to carry desired traits. This definition also extends to the use of various human cells and other body parts to produce desirable products.
When calcium carbonate is heated, it decomposes to form calcium oxide and carbon dioxide. This reaction is represented by the following equation: CaCO3 arrow CaO+ CO2
ii from the balanced equation, state the number of moles of calcium
oxide produced
Answer:
Chemical reaction involved is:
CaCO
3
→CaO+CO
2
Molar mass of CaCO
3
=40+12+16×3=100 g
According to the balanced reaction 100 g of CaCO
3
produces 1 mol of CO
2
i.e. 22.4 L at STP.
∴50 g CaCO
3
will produce
100
22.4
×50=11.2 L CO
2
at STP.
please mark me as the brainliest answer and please follow me for more answers to your questions.. if you want to follow me you should first click on my name and you will see follow button.. pls click on the follow button..
Considering the reaction stoichiometry, from the balanced equation and reation stoichiometry, the number of moles of calcium oxide produced is 1 mole.
Chemical reactions are characterized by the appearance of new substances from others. That is, they are processes in which the nature of the substances changes, that is, from some initial substances called reagents, totally different ones called products are obtained.
In this case, you know that the balanced reaction is:
CaCO₃ → CaO + CO₂
Stoichiometry establishes relationships between the molecules or elements that make up the reactants of a chemical equation with the products of said reaction. In other words, stoichiometry determines the ratios between reactants and products in a chemical reaction.
The stoichiometry of a chemical reaction is perfectly established by the chemical equation. In it, the formulas of reactants and products appear preceded by numbers (the stoichiometric coefficients) that indicate the proportions according to which the transformation occurs.
The stoichiometric coefficients of a chemical equation are due to the fact that the atoms present before the reaction must be the same after the reaction, even though the atoms will have been rearranged to produce new substances.
In this case, by reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:
CaCO₃: 1 moleCaO: 1 moleCO₂: 1 moleIn summary, from the balanced equation and reation stoichiometry, the number of moles of calcium oxide produced is 1 mole.
Learn more:
brainly.com/question/16487206?referrer=searchResults brainly.com/question/14446695?referrer=searchResults brainly.com/question/11564309?referrer=searchResults brainly.com/question/4025026?referrer=searchResults brainly.com/question/18650135?referrer=searchResultsa patient is prescribed tigan capsules for vomiting. The drug is available in the form of 300.0 mg tigan/capsules ,and is administered in 4.0 doses/day of 1 capsule/dose. How many g Tigan does the patient recieve in 2.0 days?
The patient recieves 2.4 g Tigan in 2 days
Further explanationIn finding the conversion units, we can multiply and eliminate the same units so that we can get the desired quantity or unit.
In this case, it is expected that the number of Tigan is known in 2 days, so we just need to multiply the numbers that are known
[tex]\tt =300\dfrac{mg}{capsules}\times \dfrac{1~capsules}{dose}\times 4.0\dfrac{doses}{day}\times 2.0~days\\\\=300\times 1\times 4.0\times 2.0~mg=2400~mg=\boxed{\bold{2.4~g}}[/tex]
The sun's energy influences climate in different ways. For example, the latitudes at the equator receive more intense energy from the sun and therefore have warmer temperatures. How does the sun's energy MOST DIRECTLY influence precipitation in an area?
Answer:
The Sun's energy is transferred as both light and heat energy, that raises the temperature of an area receiving the Sunlight. The increased temperature results in the evaporation of water from surfaces and water bodies, such that the mass of water vapor rises up into the atmosphere and condenses when it gets away from the ground heat to the cooler and higher altitudes
When there is a situation of low pressure, the wind blows into the low pressure, where, in the equator, comprises of high temperature air which could contain considerable amount of vapor from the neighboring water bodies, resulting in the eventual rise of very moist air, up into the atmosphere, that condenses at low temperature at the high altitudes, accumulate into larger masses of liquid water, and fall as rain
Explanation:
what is a Contraction science
Answer:
Contraction. (Science: physiology) a shortening or reduction in size, in connection with muscles contraction implies shortening and/or development of tension. Origin: L. Contractus = drawn together.
Explanation:
hope this helped:)
Which of the following is an example of a compound?
Ο Α.
water
O B.
carbon
O C.i
iron
O D.
copper
Answer:
A. water H2O, everything else is a single element C,Fe&Cu
Explanation:
How does the mass of an electron compare to the mass of a proton and a
neutron?
A. The mass of an electron is much greater than the mass of a
proton or a neutron.
B. The mass of an electron is greater than the mass of a proton but
less than the mass of a neutron.
C. The mass of an electron is much less than the mass of a proton or
a neutron.
D. The mass of an electron is greater than the mass of a neutron but
less than the mass of a proton.
Answer:
C. The mass of an electron is much less than the mass of a proton or
a neutron.
Explanation:
When we compare the mass of an electron to that of proton or neutron, the mass of an electron is much less than the mass of a proton or a neutron.
Electrons are negatively charged particles in an atom
Protons are positively charged particles
Neutrons do not carry any charges.
The relative mass of an electron compared to that of a proton is [tex]\frac{1}{1840}[/tex] This is a very small valueElectrons generally have mass of 9.11 x 10⁻³¹kgProtons weigh 1.67 x 10⁻²⁷kgNeutrons weigh 1.68 x 10⁻²⁷kgWe can see that electrons have very small mass and this is why when calculating the mass of an atom, we use the sum of the number of protons and neutrons.
Significant figures are the digits within the number that help determine
accuracy.
о
True
о
False
Answer:false
Explanation:
True or false. The center of gravity and center of mass of an object need to be in the same spot?
True
False
Answer:
i think false
Explanation:
Centre of mass is the point at which the distribution of mass is equal in all directions, and does not depend on gravitational field. Centre of gravity is the point at which the distribution of weight is equal in all directions, and does depend on gravitational field
found it on google so it could be wrong
Answer:
True
Explanation:
I took a quiz and got it right
pls mark as brainliest.
some help would be very much appreciated !!
Answer:
a = 6 m/s².
Explanation:
If we have the object with mass of 75 kg and force on it is 50 N then according to given statement its acceleration is 3m/s².
When we double the force on same object by keeping the mass constant then the acceleration will also double. It means force will be 100 N and acceleration will be 6 m/s².
But if we we increase the mass then acceleration goes to decrease.
So,
mass = 75 kg
F = 50 N
a = 3m/s² then by double the amount of force,
mass = 75 g
F = 100 n
a = 6 m/s².
This is actually explain the newton second law. This law stated that the acceleration of object is depend upon its mass and force acting on it.
F= m. a
a = F/m
Thus acceleration is directly proportional to the force and inversely proportional to the mass.
Take away my first letter and I remain the same. Take away my last letter and I remain unchanged. Remove all my letters and I'm still me. What am I?
Answer:
mail carrier
Explanation:
Make a suggestion on how you will deal with each problem.
convert 3.01€22 molecules of O²(a) mole of O²) ,volume at S.T.P,no of Oxygen atom. (d) mass
Answer:
a )0.05 moles of O₂
b) 1.1207 dm³
c) 0.3× 10²³ atoms of oxygen
d) 1.6 g
Explanation:
Given data:
Number of molecules of O₂ = 3.01 × 10²² molecules
Number of moles of O₂ = ?
Volume of oxygen at ATP = ?
Number of oxygen atoms = ?
Mass of oxygen = ?
Solution:
The given problem will solve by using Avogadro number.
"It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance". The number 6.022 × 10²³ is called Avogadro number.
Moles of oxygen:
1 mole = 6.022 × 10²³ molecules
3.01 × 10²² molecules × 1 mol / 6.022 × 10²³ molecules
0.05 moles of O₂
Number of atoms of oxygen:
1 mole = 6.022 × 10²³ atoms
0.05 mol × 6.022 × 10²³ atoms /1 mol
0.3× 10²³ atoms of oxygen
Volume of oxygen:
1 mole of oxygen at STP occupy 22.414 dm³
0.05 mol × 22.414 dm³ / 1mol
1.1207 dm³
Mass of oxygen:
Mass = number of moles × molar mass
Mass = 0.05 mol × 32 g/mol
Mass = 1.6 g
4. Calculate:the mass of the light bulb is the sum of the values on each rider. To get magnified view of the 1-gram rider,place the cursor over that rider (each tick mark represents 0.1 g.)
100-g rider:___________
10-g rider:___________
1-g ruder:___________
Note because the position of the 1-g slider can be estimated to the nearest 0.01 g, the mass measurement is typically recorded to the nearest hundredth.for example, we would write 201.32 g or 146.70 g if the slider is exactly on a 0.1-g tick mark.
5. Practice:use the gizmo to find the mass of the other objects.write their masses below.
Paper clips:__________
Cone:_________
Cube:__________
Answer:
Look in the picture
Explanation:
3 AgNO3 + K3PO4 - Ag3PO4 + 3 KNO3
What is the reaction
Answer:
its a Double Displacement (Metathesis) reaction
the balanced equation is 3AgNO3 + K3PO4 → Ag3PO4 + 3KNO3
Explanation:
Explain the significance of this quote, “Heisenberg may have slept here.”
The quote; “Heisenberg may have slept here.” is used to show a situation that involves uncertainty.
What is the meaning of “Heisenberg may have slept here.”?The quote; “Heisenberg may have slept here.” is used to connote uncertainty. Recall that Heisenberg the German scientist is the famous inventor of the uncertainty principle.
Hence, the quote; “Heisenberg may have slept here.” is used to show a situation that involves uncertainty.
Learn more about uncertainty principle:https://brainly.com/question/1851822
#SPJ2
Methane gas reacts with oxygen by combustion. How many moles of methane are needed to produce 3.5x10^-4 moles of carbon dioxide?
Answer:
3.5×10^-4 moles of methane is needed.
~~20 points~~ What is the mass number of an element which has 43 protons, 46 neutrons, and 43 electrons?
a. 132
b. 3
c. 86
d. 83706
e. 89
f. -46
g. there is not enough information given to correctly answer the question
Answer:
e. 89
Explanation:
The mass number is the number of protons and neutrons in an atom. It doesn't include electrons.
43 + 46 = 89