How many cubic inches in 1.00 liter? (1 in = 2.54 cm) ?Covert 75 cm^2 to mm^2/ Report your answer in exponential notation. A steel cylinder has a length of 2.15 in, a radius of 0.22 in, and a mass of 41 g. What is the density of the steel in g/cm^3? (1 in = 2.54 cm, Vol of cylinder = pi r^2l)

Explanation:

a 1M solution of a nonionizing substance such as glucose is a 1 Osmolar solution; a 1M solution of NaCl = 2 Osm; and a 1M solution of Na2SO4 =3 Osm. So in our example, the osmolarity of the 0.9% NaCl solution is 0.15M * 2 = 0.3 Osm.0.9% NaCl solution has a molarity of 154 mmol/L whether the solution volume is 1 dL, 1 L, 1 μL, or an Olympic-size swimming pool! Osmolarity is the ratio of osmole content to total solution volume.

The molarity and osmolarity of a 0.9 NaCL solution is 154 μM and 308 μM respectively.

The quantity of solute molecules per litre of solution is known as osmotic concentration, also referred to as osmolarity, and it serves as a measure of solute concentration. In the same way that a solution's molarity is represented by the letter "M," a solution's osmolarity is typically expressed as Osm/L.

Molarity of 0.9% NaCL solution =

0.9% = 9 grams of NaCL in 100 ml of H₂O

Molarity = weight in grams/GMW × v in ml/1000

=  [tex]$\frac{9}{58.44} \times \frac{100}{1000}[/tex]

= 0.00154 M

= 0.00154 × 10⁶

= 154 μM

osmolarity of 0.9% NaCL solution =

Multiply molarity by no. of osmoles

In NaCL the osmoles are Na⁺ and CL⁻ = 2

osmolarity = 154 × 2

= 308 μM

Thus, The molarity and osmolarity of a 0.9 NaCL solution is 154 μM and 308 μM respectively.

Learn more about osmolarity

https://brainly.com/question/13597129

#SPJ4

Complete question:

1. what is the molarity and osmolarity of a 0.9% NaCl solution that we will be using to dilute the blood. (NaCL molecular weight= 58.44 g/mol)

Since water is amphoteric, it can function as both a Brnsted-Lowry acid and a base. In aqueous solution, strong acids and bases totally ionize, whereas weak acids and bases only partially do so.

The acid-base theory of Bronsted-Lowry. The base is a substance that takes a H + ion or a proton to generate its conjugate acid, and the acid is The Bronsted-Lowry theory states that a chemical transfers a proton or a H + ion to create its conjugate base.

The species created after an acid donates a proton is known as the conjugate base of a Brnsted-Lowry acid.

Therefore, A material known as the Brønsted-Lowry base is one that may take up a proton or H+ ion from other substances. A base reforms when a conjugated acid donates a proton.

Learn more about brønsted-lowry here:

https://brainly.com/question/15885173

#SPJ4

Since water is amphoteric, it can function as both a Brnsted-Lowry acid and a base. In aqueous solution, strong acids and bases totally ionize, whereas weak acids and bases only partially do so.

The acid-base theory of Bronsted-Lowry. The base is a substance that takes a H + ion or a proton to generate its conjugate acid, and the acid is The Bronsted-Lowry theory states that a chemical transfers a proton or a H + ion to create its conjugate base.

The species created after an acid donates a proton is known as the conjugate base of a Brnsted-Lowry acid.

Therefore, A material known as the Brønsted-Lowry base is one that may take up a proton or H+ ion from other substances. A base reforms when a conjugated acid donates a proton.

Learn more about brønsted-lowry here:

brainly.com/question/15885173

#SPJ4

Additionally, an isentropic process is one that isn't necessarily adiabatic or reversible.

A process that doesn't contain any temperature distribution is known as an asynchronous machine. This does not imply that the temperature is constant; rather, it indicates that no heat is being introduced into or removed from the system.

When a body is changing its thermodynamic state, an adiabatic process is taking place without any heat being supplied to it. Therefore, the body is adiabatically isolated. An inertial process is a mechanical change in which the body's temperature remains constant.

To know more about Adiabatic visit:

https://brainly.com/question/14930930

#SPJ4

Cu(NH3)4synthesis  2+ Compared to H2O, NH3 has more lone electron pairs. H2O is a weaker Lewis base than NH3. More quickly than H2O, NH3 may give a single pair of electrons.

The outside of the nucleus is surrounded by electrons, which are negatively charged particles. Scientists may have trouble observing them since they rotate so quickly.

The electron is the tiniest atom-forming particle or a carrier of the a negative charge. Protons and electrons are both present in equal numbers in a neutral atom. For example, the hydrogen atom only has one proton and one electron. The uranium atom was unique due to its 92 protons & 92 electrons.

To know more about electron visit:

https://brainly.com/question/18367541

#SPJ4

[tex]$$\mathrm{MgSO}_{4(\mathrm{~s})} \stackrel{\Delta \mathrm{H}_{\mathrm{s}_1}}{\longrightarrow} \mathrm{MgSO}_4 \cdot 7 \mathrm{MH}_2^{+2} \mathrm{O}+\mathrm{SO}_{4(\mathrm{aq})}^{2-}$$$\\\therefore \quad \Delta \mathrm{H}_{\mathrm{s}_1}=\Delta\\\mathrm{H}_{\mathrm{Hyd}}+\Delta\mathrm{H}_{\mathrm{s}_2}$$\\\therefore \quad-20.3=\Delta \mathrm{H}_{\mathrm{Hyd}}+4.8$$\\\therefore \quad \Delta \mathrm{H}_{\mathrm{Hyd}}=-25.1 \mathrm{kcal} / \mathrm{mole}$[/tex]

The change in enthalpy that occurs when one mole of a gaseous ion dissolves in enough water to generate an infinitely diluted solution under a typical environment of 1 bar pressure is known as the hydration enthalpy (HHyd) (infinite dilution means a further addition of solute will not cause any heat change).

Enthalpy of hydration can be defined as the quantity of energy released upon dilution of one mole of gaseous ions in simple terms. With water acting as the solvent, it can be compared to the enthalpy of solvation. Also known as hydration energy, enthalpy of hydration has a constant negative value.

Learn more about Enthalpy here:

https://brainly.com/question/13775366

#SPJ4

The following cation chlorobenzene having a 5 resonating structures.

Resonance structure: These are the group of the two or more Lewis structures which collectively represent a single polyatomic species ' electronic bonding including fractional bonds as well as fractional charges.

Chlorobenzene is an aromatic organic compound having chemical formula C6H5Cl. This colorless, flammable liquid is a common solvent and it is widely used as an intermediate in the manufacture of other chemicals.

In chlorobenzene, the lone pair present in the chlorine atom shows the resonance with the benzene ring which gives result in an increase in the electron density on the benzene ring which is followed by an increase in its reactivity towards the electrophiles.

--The given question is incomplete, the complete question is

"How many resonance structures are possible in chlorobenzene?A.4. B.2 C.5 D.3"--

To know more about chlorobenzene here

https://brainly.com/question/11951778

#SPJ4

Both excitatory and inhibitory potentials undergo the same initial phase of synaptic potential production. The membrane depolarization brought on by the passage of an action potential opens voltage-gated calcium channels in the presynaptic neuron.

When all the excitatory and inhibitory inputs combine to bring the neuron's membrane potential to about -50 mV (see diagram), which is referred to as the action potential threshold, action potentials—the basic units of communication between neurons—occur.

Therefore, Variations in the conductance of ion channels in the postsynaptic membrane are also responsible for evoking synaptic potentials, which are the main input signals to which a neuron reacts.

Learn more about Synaptic potentials here:

https://brainly.com/question/12975351

#SPJ4

Both excitatory and inhibitory potentials undergo the same initial phase of synaptic potential production. The membrane depolarization brought on by the passage of an action potential opens voltage-gated calcium channels in the presynaptic neuron.

When all the excitatory and inhibitory inputs combine to bring the neuron's membrane potential to about -50 mV (see diagram), which is referred to as the action potential threshold, action potentials—the basic units of communication between neurons—occur.

Therefore, Variations in the conductance of ion channels in the postsynaptic membrane are also responsible for evoking synaptic potentials, which are the main input signals to which a neuron reacts.

Learn more about Synaptic potentials here:

brainly.com/question/12975351

#SPJ4

Answer:

sample containing only BaCl2

and NaCl

is dissolved in 50 mL

of distilled water. Titrating with 0.07916 M

AgNO3

requires 19.46 mL

to reach the end point. What is the weight percent of BaCl2

in the sample? (Molar mass of BaCl2=208.232 gmol−1

and Molar mass of NaCl=58.4425 gmol−1

)

The way I did it was ;

0.1036g of sample contained 266.6745 Molar mass of BaCl2

and NaCl

i.e. 0.1036g of sample= 266.6745 of substance

x g = 208.232 of BaCl2

only

x g=(0.1036*208.232)/266.6745

=0.08089 g

Where 0.08089 g is the mass of BaCl2

present in the sample.

Weight % = (0.08089/0.1036)*100%

= 78%

I don't know if I'm correct.

what is the correct solution to the assignment please?

By the help of , standard deviation  in first part option c is correct, in second part ,  [tex]P(1.3125 < \bar{y} < 2.5625)=0.0895[/tex],  in third part  [tex]\bar{y}=3.9266[/tex]

The standard deviation, a statistic that describes how evenly distributed a dataset is in regard to its mean, is determined by taking the square root of the variance. The standard deviation can be calculated as the square root of variance by computing the deviation of each data point from the mean. The bigger the deviation within the data collection, the further the data points deviate from the mean; hence, the higher the standard deviation, the more dispersed the data.

we have [tex]\mu=3.795[/tex]and [tex]\sigma=0.6.[/tex]

1.) Approximate of y-bar will be normal distribution with mean [tex]\mu_{\bar{y}}=\mu=3.795[/tex].) and standard deviation equal to[tex]\sigma_{\bar{y}}=\sigma/\sqrt{n}=\frac{0.6}{\sqrt{60}}=0.0775[/tex]So option c is correct with fill in blanks equal to 3.795 g/mi and 0.08 g/mi respectively.

2.) Let us find z-score for 3.9 so

[tex]z=\frac{\bar{y}-\mu_{\bar{y}}}{\sigma_{\bar{y}}}=\frac{3.9-3.795}{0.08}=1.3125[/tex]

and z-score for 4 will be

[tex]z=\frac{\bar{y}-\mu_{\bar{y}}}{\sigma_{\bar{y}}}=\frac{4-3.795}{0.08}=2.5625[/tex]

So [tex]P(1.3125 < \bar{y} < 2.5625)=0.0895[/tex]

3.) From z-table, area right to z-score 1.645 is 0.05.So

[tex]1.645=\frac{\bar{y}-3.795}{0.08} \\\\:\bar{y}=3.9266[/tex]

Learn more about standard deviation

brainly.com/question/29267809

#SPJ4

The elements in group 4-a not undergo ionic bonding as the do not forms the ion. Yes they do forms bond , they form covalent bonds.

The elements in group 4 (a) do not undergo the ionic bonding as the do not forms the ion. Yes they do forms bond , they form covalent bonds. The ionic bond forms between the positively charged ion and the negatively charged ion. The 4 (a) element do not form the ions.

They forms the covalent bond. The covalent bond forms between the atoms by the sharing of the electrons. The compounds formed by the covalent bond is called as the covalent compound.

To learn more about elements here

https://brainly.com/question/24246313

#SPJ4

In other words, the total number of a particular atom is the product of its subscript (s) and the coefficient of the chemical formula of the compound.

More on the number of atoms in compounds can be found here: https://brainly.com/question/1686912

#SPJ1

Answer:

The name for CCl3 is carbon tetrachloride.

The average of the three trials is 0.791 g/ml, which is close to the actual density of ethanol (0.789 g/ml).

Ethanol is an organic chemical compound, also known as ethyl alcohol, that is found in alcoholic beverages and has many uses in industry. It is produced by the fermentation of sugar and starches, such as corn and wheat, and is often used as an additive in gasoline. Ethanol has a variety of practical applications, including being used as a solvent, a fuel, an antiseptic and a preservative. It is also used in the manufacture of perfumes, paints, solvents, plastics and pharmaceuticals.

Trial 1: Mass = 42.3 g, Volume = 53.5 ml

Density: 42.3 g / 53.5 ml = 0.791 g/ml

Trial 2: Mass = 42.1 g, Volume = 53.4 ml

Density: 42.1 g / 53.4 ml = 0.790 g/ml

Trial 3: Mass = 42.2 g, Volume = 53.3 ml

Density: 42.2 g / 53.3 ml = 0.792 g/ml

The average of the three trials is 0.791 g/ml, which is close to the actual density of ethanol (0.789 g/ml).

To learn more about ethanol

https://brainly.com/question/20814130

#SPJ4

Explanation:

Calculating the vector sum of the electric fields generated by distinct point charges allows one to determine the strength of the electric field at a specific location in space.

The force between two point charges is proportional to the product of their charges and inversely proportional to the square of the distance between them, according to Coulomb's Law, which can be utilised to accomplish this. The total electric field at qa can be computed using Coulomb's Law by first calculating the electric field at qa caused by qb and qc, and then adding those fields vectorially.

learn more about magnitude of electric field at:

https://brainly.com/question/28561944

#SPJ4

The best answer from the list of statements is: The student noticed that the rate at which oxygen gas collected was noticeably slower after the reaction had been running for several minutes than it was when the reaction was first started.

A chemical reaction is a process in which atoms or molecules interact to form new substances with different chemical properties. During a chemical reaction, bonds between atoms are broken and new bonds are formed to create different molecules. Chemical reactions involve the rearrangement of atoms to form new compounds and release energy in the form of heat, light, or sound. Chemical reactions usually involve the exchange of electrons between atoms, resulting in the formation of new compounds. Chemical reactions are also affected by external factors such as temperature, pressure, and the presence of a catalyst.

Learn more about chemical reactions:

https://brainly.com/question/11231920

#SPJ4

Ionization energy is a function of atomic radius; the larger the radius, the smaller the amount of energy required to remove the electron from the outermost orbital.

As shielding increases going over the PT, atomic radii will increase because the shielding effect is acquired stronger which causes the valence electrons to be less attracted to the nucleus, as the atomic radii increases, ionization energy will decrease because it will not grip as much energy to remove valence.

Ionization energy and atomic number. active from left to right across the periodic table, the ionization energy for an atom increases. We can explain this by the whole nuclear charge of the atom. The more protons in the nucleus, the stronger the appeal of the nucleus to electrons.

So we can conclude that The smaller the radius, the higher the ionization energy. This is because the electrons are being held closer to the protons,

Learn more about ionization energy here: https://brainly.com/question/20658080

#SPJ1

Ammonia has a larger henry's law constant because ammonia has a very strong hydrogen bon-ding with water rather than simple in-ter-molecular forces. It can be measured as 1.62 x 10-5 atm/mole.      

Henry's law constant: Higher the value of henry's law constant, the lower will be the solubility of the gas. It can be explained by using the equation of the Henry's Law standard state of the binary mixture is where the activity of the solute is related with the mole fraction.

Ammonia is a colorless gas having a sharp suffocating o-dor. It dissolves easily in water to form a ammonium hydroxide solution which can cause irr-itation and burns. Ammonia gas will be easily compressed and it forms a clear, colorless liquid under pressure.  

To now more about Ammonia here        

https://brainly.com/question/15409518

#SPJ4

When hydrogen atoms are present in a fuel, they are oxidised to water.

The combustion reactions are commonly exothermic redox reactions between an oxidant and a fuel. When hydrogen is oxidized during combustion it forms water.

A chemical reaction in which a fuel undergoes oxidation by reacting with an oxidizing agent which results in the release of energy generally in the form of heat is called the combustion. The product formed as a result of the combustion is usually an oxidized fuel.

It is not unfamiliar that the combustion reactions are accompanied by the flames. It is very important to note that not all combustion reactions result in fires. The complete combustion reactions can sometimes referred to as clean combustion reactions.

The combustion reaction of hydrogen is given as:

2H₂ + O₂ → 2H₂O

When hydrogen is oxidized, it results in the formation of water. When hydrogen atoms are present in a fuel, they are oxidized to water.

Thus water is formed when hydrogen is oxidized.

To know more about combustion, visit;

https://brainly.com/question/14335621

#SPJ2

The nitrogen atom in the diagram has three lone pairs of electrons. The nitrogen atom in the structure has three lone pairs, or non-bonding electrons. Lone pairs are electron pairs.

in a molecule that do not form bonds with other atoms. Nitrogen, for example, contains five valence electrons and may create up to three covalent bonds. The nitrogen atom in the diagram has three lone pairs of electrons. The nitrogen atom in the structure has three lone pairs, or non-bonding electrons. Lone pairs are electron pairs. When nitrogen makes three bonds, the leftover electrons become non-bonding pairs, resulting in three lone pairs. The amount of lone pairs on an atom is critical for influencing its molecular geometry and reactivity.

learn more about  Nitrogen here:

https://brainly.com/question/16711904

#SPJ4

The total volume of CO2(g) and H2O(g) produced by the combustion of 1.00L of C2H6(g) at 600 degree Celsius and 0.888 atm is approximately 2.86 L measured at STP.

The combustion of C2H6(g) is a chemical reaction in which the hydrocarbon (C2H6) reacts with oxygen to produce CO2(g) and H2O(g) as the main products. The balanced equation for this reaction is:

C2H6(g) + 7/2 O2(g) -> 2 CO2(g) + 3 H2O(g)

According to the ideal gas law (PV = nRT), the volume of a gas is proportional to its temperature and pressure. Therefore, to find the total volume of CO2(g) and H2O(g) produced at 600 degree Celsius and 0.888 atm, we need to convert these conditions to the standard temperature and pressure (STP), which is defined as 0 degree Celsius and 1 atm.

First, we calculate the number of moles of C2H6(g) consumed in the reaction by using the Ideal Gas Law:

PV = nRT

Where:

P = 0.888 atm

V = 1.00 L

R = 8.31 J/mol*K

T = (600 + 273) K

n = (PV)/(RT) = (0.888 * 1.00)/(8.31 * (600 + 273)) = 0.0257 moles

Next, we use the mole ratios from the balanced chemical equation to find the number of moles of CO2(g) and H2O(g) produced:

n(CO2) = 2 * 0.0257 = 0.0514 moles

n(H2O) = 3 * 0.0257 = 0.0771 moles

Finally, we use the Ideal Gas Law to find the volume of CO2(g) and H2O(g) at STP:

V = nRT/P

Where:

P = 1 atm

T = 273 K

V(CO2) = n(CO2) * R * T/P = 0.0514 * 8.31 * 273/1 = 12.06 L

V(H2O) = n(H2O) * R * T/P = 0.0771 * 8.31 * 273/1 = 17.80 L

The total volume of CO2(g) and H2O(g) is the sum of their individual volumes, which is approximately 2.86 L.

To know more about volume calculation here:

https://brainly.com/question/19481730#

#SPJ11

20-35% of the total calories that are obtained from out food products are from the fats.

The food that we eat is rich in a number of essential nutrients which are required by our body and these include protein, carbohydrates, fats, vitamins, minerals etc. Our body breaks down the complex food in simpler substances in order to produce energy which is necessary to perform the day to day activities in our life.

The major sources of calories in the food are the carbohydrates followed by the fats and proteins. About 45 to 65 percent of the total calories comes from the carbohydrates, 20 to 35 percent comes from the fat, and about 10 to 35 percent of the calories come from protein.

To know more about fats here

https://brainly.com/question/14625990

#SPJ4

Molecular substances are substances composed of molecules, which are formed by the combination of atoms through covalent bonds.

The classification of the substances as molecular or ionic is as follows:

Molecular: Glucose, Water, Chlorine, Methane, Ammonia, Copper sulfide

Ionic: Calcium oxide, Silver nitrate, Potassium chloride, Barium sulfate, Sodium hydroxide.

In a molecular substance, atoms share electrons to form stable molecular structures. Unlike ionic compounds, where ions are held together by electrostatic forces, molecular substances have atoms held together within a molecule by covalent bonding.

These substances tend to have lower melting and boiling points compared to ionic compounds. This is because the intermolecular forces between molecules, such as van der Waals forces or hydrogen bonding, are weaker than the strong electrostatic forces between ions. Consequently, molecular substances often exist as gases, liquids, or solids with relatively low melting points.

Molecular substances consist of covalently bonded atoms, whereas ionic substances contain ions held together by electrostatic forces.

Therefore, the classification of the substances as molecular or ionic is as follows:

Molecular: Glucose, Water, Chlorine, Methane, Ammonia, Copper sulfide

Ionic: Calcium oxide, Silver nitrate, Potassium chloride, Barium sulfate, Sodium hydroxide.

For more details regarding molecular substances, visit:

https://brainly.com/question/3210662

#SPJ12

On a cold day the atmosphere temperature is reported as 12. 9F. The temperature in kelvin is 262.54 °K.

The thermal energy of a substance or system is measured by its temperature. Temperature measurements are most frequently expressed in Celsius (°C), Fahrenheit (°F), and Kelvin (°K) (K).

A straightforward formula is used to convert between degrees Fahrenheit and Kelvin: K = (y °F - 32) x 5/9 + 273.15. The two most widely used and recognized temperature scales are in degrees Fahrenheit and degrees Kelvin.

°K= (Temperature- 32) x 5/9 + 273.15

°K= (12.9°F − 32) × 5/9 + 273.15 = 262.54 °K.

Therefore, the reported temperature of the atmosphere on a cold day is 12. 9F.The temperature in kelvin is 262.54 °K.

Learn more about temperature at https://brainly.com/question/30392345

#SPJ4

Barium hydroxide is a chemical compound with the chemical formula Ba(OH)2

What are compounds ?

A  compound is a substance consisting of two or more elements chemically combined in a fixed ratio. They differ from mixtures consisting of  two or more substances physically mixed without chemical bonding. Compounds have their own physical and chemical properties that differ from those of individual elements. For example, the compound water (H2O) has different properties (boiling point, density, solubility, etc.) than its components hydrogen (H2) and oxygen (O2).

Compounds are formed by chemical reactions in which atoms of different elements combine to form new substances. The formation of a compound can be represented by a chemical formula that indicates the type and number of atoms in the compound.

To know more about compounds ,  click the link below ;

brainly.com/question/26487468

#SPJ4

It was predicted based on the Nernst equation experiment that the temperature would rise while the voltage generated by the electrolytic cell would drop.

The relationship between the ion concentrations on each side of a membrane that is completely selective for just that ion and the dc voltage (voltage) that will be recorded across that membranes under adaptation options is defined by this equation.

The reduction potential of an atom or ion, as measured at any circumstances, may be equated with the reduction potential as measured under realistic conditions of 298K but one molar or one air pressure using the Nernst equation.

To know more about Nernst visit:

https://brainly.com/question/22724431

#SPJ4

The larger is a uranium nucleus as compared to an iron nucleus is the radius of the uranium is  7.4  × 10⁻¹⁵ m and the iron is 4.59 × 10⁻¹⁵ m .

The average radius of the nucleus with A nucleons is R = R0 A1^/3,

where ,

R0 = 1.2 × 10⁻¹⁵ m.

A = number of protons + number of nucleons

The Radius = R = R0 A1^/3

The radius of Iron = 56

The Radius = R = 1.2 × 10⁻¹⁵ m (56)¹/³

The Radius = 4.59 × 10⁻¹⁵ m

The Radius of the Uranium = 235

The Radius = R = 1.2 × 10⁻¹⁵ m (235)¹/³

The radius = 7.4  × 10⁻¹⁵ m

To learn more about uranium here

https://brainly.com/question/19339318

#SPJ4

The concept is to provide diagnostic images using the optimal amount of radiation. If the index is too low, it may indicate poor image quality. If the dose index is too high, it may mean using more radiation than is needed for imaging.

There are three kinds of index numbers, namely:

a. Price index figures, namely comparative figures to measure price changes from one period to another.

b. Number index (quantity), which is a comparison number to measure changes in the amount from one period to another.

c. Value index number, which is a comparison number to measure changes in value from one period to another. Value is calculated by multiplying the price by the amount (quantity).

Your question is incomplete but most probably your full question was:

Explain. What is the Index Value for an exposure of low?

Learn more about index value at https://brainly.com/question/8154168.

#SPJ1

The 2,3-dimethylbutane structure is as follows: There are no chiral centers in the specified structure. Additionally, the supplied molecule has a plane of symmetry that often eliminates stereoisomerism. As a result, there are no stereoisomers.

In contrast to atomic connection, stereoisomers differ in the spatial arrangement of their atoms. The mirror-image stereoisomers, a non-superimposable pair of two molecules that are mirror images of one another, are one of their most intriguing types of isomers.

What are stereoisomers exactly?

Stereoisomers are isomers with the same composition (i.e., similar parts), but different orientations in space, according to a general description.

Learn more about  stereoisomers:

brainly.com/question/24128816

#SPJ4

Sulfur (S): -2, Bromine (Br): -1, Iodine (I): -1, Lithium (Li): +1, Strontium (Sr): +2, Magnesium (Mg): +2, Sodium (Na): +1, Cesium (Cs): +1, Barium (Ba): +2, Fluorine (F): -1, Oxygen (O): -2.

Charges are based on gaining or losing electrons to achieve stable electron configurations.

We have,

To determine the charge of the common ion formed by each of these atoms, you need to consider their position on the periodic table and their tendency to gain or lose electrons to achieve a stable electron configuration.

Sulfur (S): -2 (gains 2 electrons to form S²⁻)

Bromine (Br): -1 (gains 1 electron to form Br⁻)

Iodine (I): -1 (gains 1 electron to form I⁻)

Lithium (Li): +1 (loses 1 electron to form Li⁺)

Strontium (Sr): +2 (loses 2 electrons to form Sr²⁺)

Magnesium (Mg): +2 (loses 2 electrons to form Mg²⁺)

Sodium (Na): +1 (loses 1 electron to form Na⁺)

Cesium (Cs): +1 (loses 1 electron to form Cs⁺)

Barium (Ba): +2 (loses 2 electrons to form Ba²⁺)

Fluorine (F): -1 (gains 1 electron to form F⁻)

Oxygen (O): -2 (gains 2 electrons to form O²⁻)

Charges are determined based on the number of valence electrons and the tendency to gain or lose electrons to achieve a full valence electron shell. Metals tend to lose electrons to form positive ions (cations), while non-metals tend to gain electrons to form negative ions (anions).

Thus,

Sulfur (S): -2, Bromine (Br): -1, Iodine (I): -1, Lithium (Li): +1, Strontium (Sr): +2, Magnesium (Mg): +2, Sodium (Na): +1, Cesium (Cs): +1, Barium (Ba): +2, Fluorine (F): -1, Oxygen (O): -2.

Charges are based on gaining or losing electrons to achieve stable electron configurations.

Learn more about the charge of atoms here:

https://brainly.com/question/22398566

#SPJ12

The complete question:

What is the charge of the common ion formed by each of these atoms? Either -2,-1,+1, or +2.

S, Br, I, Li, Sr, Mg, Na, Cs, Ba, F, and O

How are these changes found?