How do you find the electric field between two plates of A parallel plate capacitor?

The components of vector D in ordered pair notation are (3, -3).

What is components of vector ?

A vector is a mathematical object made up of components. Each component is a number that describes a certain aspect of the vector. For example, a vector in two-dimensional space has two components, one representing its horizontal position and one representing its vertical position.The components of a vector can be used to calculate the magnitude, or length, of the vector. This is done by taking the square root of the sum of the squares of the components.The components of a vector also determine its direction. This is calculated by taking the arctangent of the ratio of the vertical component to the horizontal component.Finally, the components of a vector can be used to calculate its lag, which is the amount of time it takes for the vector to reach its destination. This is calculated by dividing the length of the vector by its speed.

This means that the x component is 3 and the y component is -3. Both of these components should be expressed to the nearest integer.

To learn more about components of vector
https://brainly.com/question/3214758
#SPJ4

A source of straight waves is a linear item attached to an oscillator that bobs back and forth in the water.

The crests and troughs of these straight waves alternate. On the sheet of paper beneath the tank, the crests are the long, dark lines, and the troughs are the short, brilliant lines.

These waves will propagate through the water until they run into a barrier, such the tank wall or a submerged object. In the illustration to the right, a line of waves traveling in a straight line are shown approaching a long barrier that is extending across the water tank at an angle.

The blue arrow indicates the direction in which these wavefronts (straight-line crests) are moving through the water.

Therefore, A source of straight waves is a linear item attached to an oscillator that bobs back and forth in the water.

To learn more about Straight waves, refer to the link:

https://brainly.com/question/20492082

#SPJ1

Answer:

A and D

Explanation:

The characteristic that is not correct is "Electronegativity decreases with increase in atomic number." Hence, the correct option is (b).  

Electronegativity is the measure of an atom's ability to attract electrons towards itself in a chemical bond. In the case of the halogens (fluorine, chlorine, bromine, iodine, and astatine), electronegativity generally increases with increasing atomic number, meaning that the elements become more electron-hungry as the atomic number increases. The other characteristics mentioned (ionization energy, electron affinity, and enthalpy of fusion) do show a general trend of decreasing with increasing atomic number, as the atoms become larger and less tightly bound.

To know more about electronegativity please refer: https://brainly.com/question/17762711

#SPJ4

Mysterious flying spiral' above Hawaii likely caused by SpaceX launch : NPR. 'Mysterious flying spiral' above Hawaii likely caused by SpaceX launch A Japanese telescope captured images of the shape on Jan. 18.

SpaceX or Space Exploration Technologies Corporation is a company founded by Elon Musk in 2002. SpaceX is a company engaged in space flight. SpaceX was founded with a focus on developing rockets that could be used in commercial space flights.

One of the efforts to achieve the target is to develop a rocket launcher or booster that can be used to fly into outer space many times.

Learn more about SpaceX at https://brainly.com/question/29786302

#SPJ4

Negatively charged particles found in shells around the nucleus of a particular atom are called electrons.

Electrons are subatomic particles that have a negative charge, and they are found in the electron shells surrounding the nucleus of an atom. The number of electrons in an atom is equal to the number of protons in the nucleus, which helps to keep the atom electrically neutral. Electrons are responsible for many of the properties of atoms, including chemical reactivity.

Learn more about electrons at: https://brainly.com/question/371590

#SPJ4

Answer:

that the force of the pull is equal due to Newton's third law or some kind of answer like that.

There is an invisible force of gravity that binds the two together. This

gravity is what causes the moon to orbit the Earth.

Gravity is a natural phenomenon by which all physical objects attract each other. It is most commonly experienced as the force of attraction between masses such as planets, stars, and galaxies. It is also the force that holds us to the ground and keeps us from floating away. The strength of gravity depends on the masses of the objects, the distance between them, and the acceleration due to gravity. Objects with greater mass, such as planets, have a stronger gravitational pull than objects with lesser mass. The gravitational force between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. Gravity is one of the fundamental forces of nature and plays an important role in the structure and evolution of the universe.

To learn more about gravity

https://brainly.com/question/940770

#SPJ4

The magnitude of the electric field at the position of the charge is 6820 N/C.

The electric field E can be calculated using Coulomb's Law, which states that the force between two charged particles is proportional to the product of their charges and inversely proportional to the square of the distance between them:

F = k * q1 * q2 / r^2

Where k is the Coulomb constant (8.99 x 10^9 N * m^2 / C^2) and r is the distance between the charges. If we have only one charge q1 and a force F on it, we can rearrange the equation to find the electric field at its position:

E = F / q1

Plugging in the given values, we have:

E = 5.6 N / -8.2 x 10^-6 C = -6820 N/C

So, the magnitude of the electric field at the position of the charge is 6820 N/C.

To learn more about  Coulomb's Law:

https://brainly.com/question/506926

#SPJ4

The lab report is divided into eight sections:

Title, Abstract, Introduction, Methods and Materials, Results, Discussion, Conclusions, References.

For more information on the good rubric, please visit:

Brainly.com/question/30395634

#SPJ1

Magnitudes of the two charges are approximately 3.96 μC and 27.04 μC.

The physical property of matter that causes that matter to experience force when placed in an electromagnetic field is called electric charge.

(a) Q1 + Q2 = 31 μC = 31 x 10^-6 C

F = k * (Q1 * Q2) / r^2

k is Coulomb constant, r is distance between the charges, and F is force of repulsion.

Q1 = sqrt(F * r^2 / k * Q2)

Q2 = sqrt(F * r^2 / k * Q1)

Q1 = sqrt(0.1572 N * (3.1 m)^2 / (8.99 x 10^9 N m^2/C^2) * 31 x 10^-6 C) = sqrt(15.75) μC = 3.96 μC

Q2 = 31 x 10^-6 C - Q1 = 31 x 10^-6 C - 3.96 x 10^-6 C = 27.04 x 10^-6 C = 27.04 μC

So, the magnitudes of the two charges are approximately 3.96 μC and 27.04 μC.

To know more about charges, refer

https://brainly.com/question/1121280

#SPJ4

The relative abundance of 25Mg can be calculated using the total percent relative abundance of all three isotopes and the known relative abundance of 24Mg.

define relative abundance ?

Relative abundance refers to the proportion or fraction of a particular isotope present in a sample of a naturally occurring element. It is usually expressed as a percentage of the total isotopes present in the sample. The relative abundance of an isotope is determined by counting the number of atoms of the isotope in a sample and comparing it to the total number of atoms of all isotopes present in the sample. The relative abundance of an isotope can provide information about the origin and evolution of the material and can be used in various fields, such as geology, biology, and medicine.

Let X be the percent relative abundance of 25Mg, then:

X + 79 + (100 - X - 79) = 100

Combining like terms:

2X = 100 - 79 = 21

Dividing both sides by 2:

X = 21 / 2 = 10.5

So, the percent relative abundance of 25Mg is 10.5%.

To learn more about relative abundance follow the given link:  https://brainly.com/question/28490234

#SPJ4

A good leaving group favors SN1 reactions.

A good leaving group is defined as a species that is readily displaced from a substrate by a nucleophile. A good leaving group should have a low bond dissociation energy and be a stable species. In SN1 reactions, the rate-determining step involves the formation of a carbocation intermediate, which is why a good leaving group is favored in these reactions. The carbocation intermediate is stabilized by a good leaving group, which makes the reaction more favorable and increases the reaction rate.

In contrast, SN2 reactions are characterized by a direct attack of the nucleophile on the substrate without an intermediate step, and the rate of the reaction is determined by the concentration of both the substrate and the nucleophile. A good leaving group is less important in SN2 reactions since the reaction does not involve an intermediate species.

To learn more about SN1, visit:

https://brainly.com/question/14493718#

#SPJ11

The electric flux through a spherical surface is given by the equation:

Φ = q/ε0 * A, where q is the total charge enclosed by the surface, ε0 is the permittivity of free space (8.85 x 10^-12 F/m), and A is the surface area of the sphere.

Therefore, if r > d (where r is the radius of the sphere, and d is the distance from the charge to the center of the sphere),

If the radius of the sphere is larger than the distance d, then the integral can be calculated as follows:

E flux = ∫ E · dA = ∫ E · (r2 sinθdθdφ) = E · (4πr2)

then the electric flux through the spherical surface would be q/ε0 * 4πr^2, since the surface area of a sphere is 4πr^2.

learn more about electric flux Refer:brainly.com/question/30267804

#SPJ4

Heat is thermal energy that is transferred from a hotter body to a cooler body.

Heat is the transfer of kinetic energy from one means or object to another, or from an energy origin to a medium or object. Such energy transfer can occur in three ways: radiation, instruction, and convection. Heat is the exchange of "thermal” energy due to a temperature difference. examine an isolated system made up of two subsystems initially at two different temperatures.

Heat is a form of energy that built the substance hot. In winter, it is our usual experience that we feel cold inside the house, and heat if we come out in front of sun rays, then we experience warm.

So we can conclude that Heat is also called thermal energy.

Learn more about the heat here: https://brainly.com/question/934320

#SPJ1

The distance between you and the deer when you come to a stop depends on the speed and time it took you to stop.

If you are driving a car, for example, the distance will depend on the speed you were traveling, the reaction time of the driver, the braking force of the car, and other factors.

What is speed?

Speed is the rate of change of position, or the rate at which something moves in a given direction. It is a scalar quantity, meaning it does not have a direction associated with it. Speed is measured in units such as meters per second (m/s), kilometers per hour (km/h), or miles per hour (mph).

Therefore, he distance between you and the deer when you come to a stop depends on the and time it took you to stop.

To learn more about speed

Here: https://brainly.com/question/13943409

#SPJ4

A fraction of a circle is not always represented by the difference in the sun's altitude as seen from two cities.

The angle between the horizon and the sun, as seen from a certain spot on Earth, is known as the sun's height.

It is frequently used to estimate solar radiation for various places and plays a key role in determining how much solar energy reaches the earth.

With 0 degrees at the horizon and 90 degrees immediately overhead, the sun's altitude is expressed in degrees from the horizon.

It is not necessary to connect the difference in sun altitude between two towns to a circle's fraction because it might range from 0 to 180 degrees.

The latitude and longitude of the two cities, along with the season, would determine the precise relationship.

Learn more about sun:

https://brainly.com/question/17376727

#SPJ4

The time period is 15/19 s = 0.79 s. The frequency is 76/60 Hz = 1.23Hz.

What is time period?

The amount of time that a behavior lasts or a condition persists. Depending on the type of activity or condition under consideration, it may be measured in seconds or in millions of years.

Given that the heartbeat is 76 heartbeats in one minute.

In other words: the heartbeat is 76 heartbeats in 60 sec.

The period is the Number of seconds/ number of heartbeats

= 60/76

=15/19 s

The frequency of a repeating event is its number of instances per unit of time. It differs from angular frequency and is sometimes referred to as temporal frequency for clarity. One event occurs every second when measuring frequency in hertz.

The frequency (in Hz) of the heart’s oscillations

= 76/60

= 19/15 Hz

To learn more about oscillations, click on the below link:

https://brainly.com/question/13876382?referrer=searchResults

#SPJ4

(a) For an angle of 45 degrees, both horizontal and vertical component of the velocity are equal.

(b) For an angle of 60 degrees, the vertical component of the velocity is greater than the horizontal component.

The horizontal and vertical component of the arrow's velocity is calculated as follows;

Vx = V cos (θ)

Vy = V sin (θ)

where;

Vx = V cos (45)

Vx = 0.707 V

Vy = V sin (45)

Vy = 0.707 V

For 60 degrees, the component of the velocity are calculated as follows;

Vx = V cos (60)

Vx = 0.5 V

Vy = V sin (60)

Vy = 0.866V

Learn more about component velocity here: https://brainly.com/question/24949996

#SPJ1

After the elastic collision , the "8" ball moves at a speed of 2 m/s.

After a head-on elastic hit where the projectile is substantially more massive than the target, the velocity of the target particle will be nearly double that of the projectile, while the projectile's speed will virtually remain constant.

Let's call the "8" ball's post-collision velocity "v1." The total momentum prior to the collision and the total momentum following the collision are equal.

m1 * v1 + m2 * v2 = m1 * v + m2 * 0

where m2 denotes the weight of the additional object and m1 denotes the mass of the "8" ball. Rearranging and addressing v1:

v1 = (m2 * v2 + m1 * v) / m1

Plugging in the values given:

v1 = (0 + 0.25 kg * 2 m/s) / 0.25 kg = 2 m/s

To know more about collision visit:-

https://brainly.com/question/25945297

#SPJ1

As n is not an integer, so there will be no constructive interference between the speakers, if speaker A is moved by minimum distance. So, the answer is 0.

Interference is a phenomenon in which two waves combine by adding  displacement together at every single point in space and time and to form a resultant wave of greater, lower, or same amplitude.

Wavelength of a 500 Hz sound wave is the speed of sound (about 343 m/s) divided by the frequency of the sound, which is 343/500 m = 0.686 m. Therefore, minimum distance you can move speaker A to achieve constructive interference along x-axis is 0.686/2 m = 0.343 m.

Given, distance between the speakers is 6 m. Constructive interference will occur when path difference between two waves is equal to integer multiple of the wavelength. To achieve constructive interference, distance between the speakers + the distance moved by speaker A should be equal to n × wavelength, where n is integer.  

So, 6 + 0.343 = n × 0.686

n = (6+0.343)/0.686 = 8.8

As n is not an integer, so there will be no constructive interference between the speakers, if speaker A is moved by minimum distance.

To know more about interference:

https://brainly.com/question/30356938

#SPJ4

Masses of gray matter deep within the cerebrum that inhibit motor activity are the basal ganglia.

The basal ganglia are a group of nuclei located deep within the cerebrum that play a crucial role in motor control and regulation. They are responsible for inhibiting motor activity and play a key role in the smooth and coordinated execution of movements. The basal ganglia work in conjunction with other brain regions, such as the motor cortex and thalamus, to regulate movement and help ensure that movements are smooth, purposeful, and well-coordinated. Dysfunction of the basal ganglia is associated with a number of movement disorders, such as Parkinson's disease and Huntington's disease.

To know more about cerebrum please refer: https://brainly.com/question/13024540

#SPJ4

The location of an object in the local sky can be described by its altitude and azimuth.

Altitude refers to the height of an object above the horizon. It is measured in degrees, with 0 degrees being the horizon and 90 degrees being directly overhead.

Azimuth refers to the object's position in the sky along the horizon. It is also measured in degrees, with 0 degrees being directly north, 90 degrees being directly east, 180 degrees being directly south, and 270 degrees being directly west.

Together, altitude and azimuth describe the position of an object in the local sky in a two-dimensional plane. By observing the altitude and azimuth of an object at different times, we can determine its motion across the sky, which can be used for navigation, identifying stars and constellations, and tracking the positions of celestial bodies.

Learn more about altitude and azimuth:

https://brainly.com/question/3601296

#SPJ4

A positively charged balloon expands as it is blown up, increasing in size from the initial to final diameters shown. The electric fields at points 1,2, and 3 will increase.

As the balloon expands, the amount of electric charge on its surface increases proportionally. This increase in charge results in an increase in electric fields at each of the three points. Point 1 is closer to the balloon than points 2 and 3, so the increase in the electric field will be greater at point 1 than at points 2 and 3.  

At point 1, the electric field will increase as the balloon expands because the amount of electric charge on the balloon increases. The electric field at point 1 is proportional to the amount of charge on the balloon. Points 2 and 3, however, are farther away from the balloon and will experience a smaller increase in the electric field.  When the balloon is inflated, the electric field lines become more concentrated and the electric field becomes stronger.

All three points will experience an increase in the electric field as the balloon expands, with point 1 experiencing the greatest increase. This is due to the fact that point 1 is closest to the balloon and therefore experiences the greatest increase in the electric field as the amount of charge on the balloon increases.

To know more about electric fields refer to the link   brainly.com/question/26446532

#SPJ4

A positively charged balloon expands as it is blown up, increasing in size from the initial to final diameters shown. do the electric fields at points 1,2, and 3 increase, decrease, or stay the same? explain your reasoning for each point

"The given statement When an epiphyseal plate closes longitudinal growth is no longer possible is true."

Longitudinal growth is no longer possible when an epiphyseal plate closes.

When longitudinal growth ends, proliferation comes to an end, and the final adult height is attained. Senescence of the growth plate is the name for this process.

As kids get older, the growth plates fuse into solid bone. A growth plate that has completely fused with bone is said to be closed. When a growth plate shuts, the bones stop developing.

In the epiphyseal growth plates, chondrocyte proliferation and subsequent endochondral ossification lead to longitudinal bone development. The growth-plate, a cartilaginous template, is found between the long bones' epiphysis and metaphysis.

To know more about epiphyseal plate:

https://brainly.com/question/20038915

#SPJ4

Astronauts on the international space station are weightless because of microgravity.

Microgravity is the condition where individuals or items give off an impression of being weightless. The impacts of microgravity should be visible when space travelers and items float in space. Microgravity can be knowledgeable about alternate ways, also. "Miniature " signifies "tiny," so microgravity alludes to the condition where gravity is by all accounts tiny. In microgravity, space explorers can drift in their shuttle - or outside, on a spacewalk. Weighty articles move around without any problem. For instance, space explorers can move gear gauging many pounds with their fingertips. Microgravity is once in a while called "zero gravity," yet this is misdirecting.

To know more about microgravity, visit here:

https://brainly.com/question/14239044

#SPJ4

The electric flux through each face of the cube is Φface = 2 * (8.99 × 10^9 Nm^2/C^2) * (5.00 × 10^−12 C) / a

Property of an electric field that may be thought of as the number of electric lines of force that intersect a given area is called electric flux .

The electric flux through each face of the cube can be calculated using:

Φ = EA

Φ is electric flux, E is electric field strength at the surface, and A is area of the surface

E = kQ/r^2

where k is the Coulomb constant, Q is the charge of the point, and r is the distance from the point to the surface. For a cube of side length a, r is equal to a/2.

Φ = kQA/r^2 = kQA/(a/2)^2 = 2kQA/a^2

Since each face of the cube has an area of a^2, the electric flux through each face is:

Φface = 2kQ/a

Φface = 2 * (8.99 × 10^9 Nm^2/C^2) * (5.00 × 10^−12 C) / a

To know more about electric flux, refer

https://brainly.com/question/2664005

#SPJ4

We say that momentum is conserved, we mean that the total momentum of a system remains constant.

This means that in any interaction or collision, the total amount of momentum before and after the collision is the same. This is due to the law of conservation of momentum, which states that the total momentum of a closed system (meaning that no external forces are acting on it) is constant. This means that the total momentum before and after an interaction must be the same, as the momentum of the system cannot be changed unless an external force acts on the system. Whether an elastic or non-elastic collision occurs, momentum is always conserved. Kinetic energy, however, is not conserved in a non-elastic collision; instead, it is transformed into heat energy, potential energy, etc.

To know more about momentum please refer: https://brainly.com/question/12450698

#SPJ4

Total acceleration in kinematics is given by the equation A = 0(i) + g(-j) + a(j) + 0(k) = Ax(i) + Ay(j) + Az (k) F - mA = 0 in terms of mechanics; g = 9.81 in terms of the gravitational acceleration Labeling: Tabu, etc. for tension between A and B Coordinate System: right x, up y, and out of page z The Effort to Find a Solution

Diagram of the free body on the left point mass (EQ1) F1 = mA = 0, which equals Tab*cosd(45)(-i) + Tbc(i) + Tab. - mA *sind(45)(j) F2 - mA = 0 = Tdc*cosd(45)(i) + Tbc(-i) + Tdc Freebody Diagram on Right Point Mass (EQ2) - mA *sind(45)(j) X-Components of (EQ1) and (EQ2) Solved: For the (EQ2) y-component, Tab is substituted for Tdc as follows: Tabulated as m(g(-j) + a(j)) = sind(45) (j) Y-component of (EQ1) as shown:

m(g(-j) + a(j)) = Tab*sind when Tab is substituted for Tdc in the (EQ2) y-component (45)(j) Displaying the y-component of (EQ1) Tabulated as m(g(-j) + a(j)) = sind(45) (j) RESULTING: => sqrt = tab (2) mAy = Tdc Tbc mAy note: A = 0(i), g(-j), a(j), and 0(k) = Ax(i), Ay(j), and Az (k) Ay = -g + a

To know more about kinematics click here

brainly.com/question/7590442

#SPJ4

The speed of the mass when the string is vertical after wrapping around the pole is approximately 4.43 m/s.

The speed of an object is described as the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time. Speed is thus a scalar quantity.

The initial potential energy of the mass at rest at an angle of 60 degrees is converted into kinetic energy as the mass moves and arcs upwards.

At the highest point of its motion, all the potential energy will have been converted into kinetic energy.

we will find potential energy as:

PE = mgh = (0.2 kg)(9.8 m/s^2)(2.0 m * sin 60°) = 1.96 J

The  kinetic energy at the highest point  will be :

KE = 0.5 mv^2

Since the total energy is conserved, we will have that

PE + KE = constant

So, substituting in the initial potential energy and solving for the velocity:

1.96 J + 0.5 * (0.2 kg) * v^2 = 1.96 J

0.5 * (0.2 kg) * v^2 = 1.96 J

v^2 = (1.96 J) / (0.1 kg)

v = √((1.96 J) / (0.1 kg)) = √t(19.6 N * s^2/kg) = 4.43 m/s

Learn more about  potential energy at : https://brainly.com/question/14427111

#SPJ1

The correct answer is an object on a bound orbit follows the same path around the Sun over and over, whereas an object on an unbound orbit approaches the Sun just once and then never returns.

A bound orbit is an orbit around a celestial body in which an object is held in place by the gravitational attraction of that body. The object follows a predictable path and does not escape the gravitational pull of the body.

The shape of a bound orbit can be circular or elliptical, and the object can continue to orbit the body indefinitely.

Therefore, The correct answer is an object on a bound orbit follows the same path around the Sun over and over, whereas an object on an unbound orbit approaches the Sun just once and then never returns.

To know more about bound orbit refer to:

brainly.com/question/15595200

#SPJ4

Answer: 1,200 meters

Explanation:

1 minute = 60 seconds

(60 s)(10 m) = 600 seconds

(600 s)(2m) = 1,200 m

Therefore, running 2 m/s for 600 seconds results in a total of 1,200 meters ran.