Answer:
Explanation: When water temperatures rise, or fall, this can irritate, and stress the coral polyps, causing them to lose the algae that lives in the polyp's tissues.
Answer:
Coral reef species may be significantly impacted by a shift in water temperature. Coral bleaching is a condition when the coral expels their symbiotic algae, resulting in a loss of color and perhaps mortality. Sudden temperature fluctuations, especially rises, can induce coral bleaching. The prevalence of illnesses in corals and other reef species can also rise in response to an increase in water temperature. The distribution and behavior of fish and other species might change in response to temperature changes, possibly upsetting the delicate balance of the reef ecosystem. These effects may result in a reduction in the coral reef's biodiversity and general health.
To learn more about coral reefs visit: https://brainly.com/question/1287468
one can of diet soda contains 180 mg of aspartame, c14h18n2o5. how many moles of nitrogen atoms are there in the can (assuming all of the nitrogen comes from aspartame)? use the molar mass from the previous problem (294.304 g/mol, unrounded) and report your answer to the appropriate number of significant digits.
If one can of diet soda contains 180 mg of aspartame, c14h18n2o5 then it contains 7.3 x [tex]10^19[/tex]nitrogen atoms.
The molar mass of aspartame, C14H18N2O5, is 294.304 g/mol. In one can of diet soda, there are 180 mg of aspartame, which is equivalent to 0.18 g.
So, the number of moles of aspartame in the can of soda is 0.18 g / 294.304 g/mol = 6.09 x [tex]10^-5[/tex] moles.
The number of nitrogen atoms in aspartame is 2.
So, the number of moles of nitrogen atoms in the can of soda is 6.09 x [tex]10^-5[/tex] moles * 2 = 1.22 x [tex]10^-4[/tex] moles of nitrogen atoms.
To convert moles to number of atoms, we multiply the number of moles by Avogadro's number, which is 6.022 x [tex]10^23[/tex] atoms/mol.
So, the number of nitrogen atoms in the can of soda is 1.22 x [tex]10^-4[/tex] moles * 6.022 x[tex]10^(23)[/tex] atoms/mol = 7.34 x [tex]10^19[/tex] nitrogen atoms.
Rounding to the appropriate number of significant digits, the answer is 7.3 x [tex]10^19[/tex] nitrogen atoms.
Learn more about aspartame here:
https://brainly.com/question/10797758
#SPJ4
Dalton's experiments advanced our understanding of the atom without:____.
Dalton's experiments advanced our understanding of the atom without the use of sophisticated scientific tools that are available today.
In the late 18th and early 19th centuries, Dalton carried out a series of experiments that led him to propose the atomic theory, which revolutionized the way scientists thought about matter.
Despite his lack of access to modern instruments, Dalton was able to make several important observations about the behavior of gases, which led him to propose that all matter is composed of small, indivisible particles called atoms. Dalton also suggested that atoms of different elements have different properties and combine in fixed ratios to form compounds.
While Dalton's atomic theory has been modified and refined over the years, his experiments laid the foundation for our understanding of the structure and behavior of matter. Dalton's work demonstrates the importance of careful observation and deduction in scientific inquiry, even in the absence of advanced technology.
Learn more about atom:
brainly.com/question/1566330
#SPJ4
calculate amount of heat needed to compeltely vaporize a 1.5 mol sample of liquid chloroform originally at --60
The amount of heat needed to completely vaporize a 1.5 mol sample of liquid chloroform at 60°C ,A total heat of 714.7 kJ needed to vaporize the sample of chloroform.
it can be calculated using the equation Q = m × ΔHvap. In this equation, m is the mass of the sample, and the specific enthalpy of vaporization (ΔHvap) is the amount of energy needed to vaporize 1 mole of the substance. For liquid chloroform, the molar mass is 119.38 g/mol and the enthalpy of vaporization is 37.6 kJ/mol. Plugging these values into the equation gives us a total heat of 714.7 kJ needed to vaporize the sample of chloroform. This means that 714.7 kJ of heat energy must be supplied to the sample in order to completely vaporize the liquid chloroform.
To learn more about chloroform
brainly.com/question/13334667
#SPJ4
difference between local action and polarizations
Answer:
Local action refers to the activities taken by a person or organization, typically within a defined area or locality, to address a particular issue or problem. Examples of local action can include the formation of local clubs and organizations, the establishment of community gardens, or the creation of educational campaigns.
Polarization refers to the tendency of individuals and groups to engage in more extreme forms of behavior, such as extreme political views, extreme religious views, or extreme social views. This often occurs when individuals or groups feel that their beliefs, opinions, and values are not being heard or respected by others. Polarization can lead to increased conflict and discord within a society.
salt is often used to melt ice on roads during the winter because it lowers the freezing/meltingpoint of water. when salt dissolves in water, individual na and cl- ions break away from thesalt crystal and become surrounded by water molecules. why would this cause ice to melt?
When the salt is dissolved in water, the melting point of ice is lowered by the presence of salt in the water and encourages it to melt. it separates into Na+ and Cl- ions.
These ions disintegrate the hydrogen bonds holding together the water molecules that give ice its solid structure. The ice melts and transforms into liquid water when the ions break the hydrogen bonds, which lowers the energy of the water molecules. The ice will melt at a lower temperature than it would without the salt because the freezing point of water is lower when ions are present. The salt also causes the ice's surface tension to break down and lowers the energy required for the molecules to move, both of which promote melting. Consequently, the melting point of ice is lowered by the presence of salt in the water and encourages it to melt.
To learn more about melting point
brainly.com/question/29578567
#SPJ4
a chemical catalyst increases the rate of a reaction by a. acting as one of the reactant molecules b. decreasing the energy of activation c. increasing the energy content of the product molecules d. increasing the temperature of a solution
A chemical catalyst increases the rate of a reaction by decreasing the energy of activation.
In a chemical reaction, the presence of a catalyst increases the reaction rate in both forward and backward reactions by providing an alternative pathway by lowering the activation energy.
Catalysts increase the rate of a reaction without being used up. With the presence of a catalyst in a certain reaction, more number of collisions take place, so the rate of reaction increases.
When the activation energy is lowered, more reactants can cross the reaction barrier easily and so, the rate of reaction increases.
Therefore, we can say that the role of a catalyst is to lower the activation energy in order to increase the reaction rate.
To know more about catalyst here
https://brainly.com/question/20166168
#SPJ4
sodium hydroxide (naoh) has a lattice energy of -887 kj>mol and a heat of hydration of -932 kj>mol. how much solution could be heated to boiling by the heat evolved by the dissolution of 25.0 g of naoh? (for the solution, assume a heat capacity of 4.0 j>g
78.57mL solution could be heated to boiling by the heat evolved by the dissolution of 25.0 g of naoh.
Heat evolved by dissolution of 1 mole NaOH
= Lattice energy - hydration energy
= (-887kJ/mol) - (-932kJ/mol)
= 45kJ/mol
(Molar mass of NaOH = 39.997g/mol)
using the formula
Density = mass/volume
And
Volume = mass/density
Mass = 82.5g
density of solution = 1.05g/mL
So
Volume = (82.5g)/(1.05g/mL)
Volume = 78.57mL
Changes in physical or chemical processes frequently include the transfer of energy. According to the rule of conservation of energy, energy is neither generated nor destroyed during any physical or chemical activity. Under other words, the universe's whole supply of energy is kept in check. We must first identify two aspects of the universe, the system and the surrounds, in order to properly comprehend the energy changes that occur throughout a reaction. The particular area of matter in a given place that is being examined during an experiment or observation is referred to as the system. Everything in the cosmos that is not a component of the system is considered the surrounds.
Learn more about Heat evolved here:
https://brainly.com/question/13220736
#SPJ4
HELP
What is the total pressure of a wet gas mixture at 60°C, containing water vapor, nitrogen, and helium. The partial pressures are
Pnitrogen - 53. 0 kPa and Phelium = 25. 5 kPa.
The total pressure of the wet gas mixture is [tex]78.5 kPa.[/tex]
Water vapour is another component of the wet gas mixture, but it is not taken into account in the formula above because it has no impact on the overall pressure. When liquid water is heated to the point of evaporation, it turns into the gas known as water vapour. Its partial pressure is influenced by the temperature and relative humidity of the atmosphere and is mostly made up of hydrogen and oxygen. Because of this, the total pressure of the wet gas combination is calculated without taking into account water vapour.This is calculated by adding the partial pressures of nitrogen (53.0 kPa) and helium (25.5 kPa). Mathematically, this is represented as
[tex]Ptotal = Pnitrogen + Phelium \\\\ = 53.0 + 25.5\\\\ = 78.5 kPa.[/tex]
Therefore,The total pressure of the wet gas mixture is [tex]78.5 kPa.[/tex]
learn more anout wet gas Refer:brainly.com/question/14356335
#SPJ4
A cylinder that contains air at a pressure of 100 kPa has a volume of 0.75 L. The pressure is
increased to 300 kPa. If the temperature does not change, what is the new volume of air?
The new volume of air is 0.25 L.
What is temperature?Temperature is the degree of hotness or coldness of an object.
The relationship between pressure, volume, and temperature of an ideal gas can be described by the Ideal Gas Law:
PV = nRT
where
P is pressure V is volume n is the number of moles of gas R is the ideal gas constantT is the temperature in kelvinSince the temperature does not change, we can assume that T is constant, so the relationship between P and V can be described by:
P1V1 = P2V2
where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
So, we can substitute the given values and solve for the new volume:
100 kPa * 0.75 L = 300 kPa * V2
V2 = 0.75 L * (100 kPa / 300 kPa) = 0.25 L
Therefore, The new volume of air is 0.25 L.
Learn more about temperature here: brainly.com/question/24746268
#SPJ1
how many l of 0.8 m hcl are required to neutralize 3.5 l of 1.2 m koh ? select one: a. 5.3 l b. 4.1 l c. 3.3 l d. 19.4 l
The amount of HCl required to neutralize KOH can be calculated using the concept of stoichiometry. so using this answer we get that we require 5.3l of
The balanced chemical equation for the neutralize reaction between HCl and KOH is:
HCl + KOH → H2O + KCl
1 mole of HCl reacts with 1 mole of KOH to produce 1 mole of water and 1 mole of potassium chloride.
The number of moles of HCl required can be calculated by dividing the volume of KOH (3.5 L) by its molarity (1.2 M), which gives us:
n(HCl) = 3.5 L * 1.2 M = 4.2 moles
Then, the volume of HCl required can be calculated by dividing the number of moles by its molarity (0.8 M):
v(HCl) = 4.2 moles / 0.8 M = 5.3 L
So, the answer is: a. 5.3 L.
Learn more about neutralize here:
https://brainly.com/question/15347368
#SPJ4
what molecule does nad become during glycolysis? does nad gain or lose electrons? does nad gain or lose energy? group of answer choices nadh, lose, gain pyruvic acid, lose, gain fadh2, gain, lose nadh, gain, gain citric acid, gain, lose
During glycolysis NAD reduces to form NADH and H⁺. Generally, reduction is gain of electrons and thus gaining of negative charge. The atom is said to be reduced when it acquire electrons.
Glycolysis is defined as a process in which glucose (sugar) is partially broken down by cells in enzyme reactions that do not need oxygen. Cells use one of the method to produce energy known as glycolysis.
Nicotinamide adenine dinucleotide (NAD+) is one of the important molecule used in the process of glycolysis. It is a cofactor which usually regulates metabolism through its electron transport function in the redox reaction in glycolysis and the TCA cycle, In glycolysis, NAD+ reduces forming NADH and H⁺.
NAD reduces to form NADH and H⁺ during glycolysis, so it gains electrons during the process.
Learn more about NAD⁺ from the link given below.
https://brainly.com/question/1581364
#SPJ4
if the concentration of h in a solution is 1 x 10 - 11, what would be the ph of the solution? select one: a. 5 b. 11 c. 7 d. 3
The pH of solution is 11. Option b is correct.
The way to measure of how acidic/basic water is pH. The range goes from 0 - 14, with 7 being neutral. pH of less than 7 indicate acidity, whereas a pH of greater than 7 indicates a base. pH is really a measure of the relative amount of free hydrogen and hydroxyl ions in the water.
The full form of pH is “Potential of Hydrogen”. pH is known as the negative logarithm of H+ ion concentration.
pH = -log(H+)
Here, H+ = [tex]1 \times 10^{-11}[/tex]
pH = [tex]-\log{10^{-11}}[/tex]
pH = 11
To know more about the pH, here
brainly.com/question/30560212
#SPJ4
Which have more reactive concentrated hcl or dilute hcl acid
Concentrated HCl is considered to be more reactive than dilute HCl acid.
This is because concentrated HCl has a higher concentration of hydrogen ions (H+) compared to dilute HCl, meaning that it can more easily donate hydrogen ions in reactions and therefore be more reactive. This property is related to the acidity of the solution, which is determined by the concentration of hydrogen ions in the solution. In general, the more hydrogen ions a solution contains, the more acidic the solution is and the more reactive it is.
Learn more about Concentrated here:
https://brainly.com/question/10725862
#SPJ4
A buffer is prepared by adding 300. 0 mL of 2. 0 M NaOH to 500. 0 mL of 2. 0 M CH3COOH (Ka = 1. 8 × 10–5). What is the pH of this buffer? 0. 10 mol of HCl is now added to this buffer (assume no volume change due to the addition of HCl), what is the pH now? Now you add 0. 120 mol of NaOH to the original buffer solution (before the addition of HCl) (again assume no change in volume due to the addition of NaOH)
The pH of the buffer after 0.10 mol of HCl is added is 4.76, and the pH of the buffer after 0.120 mol of NaOH is added is 11.24.
A buffer solution is a mixture of
a weak acid and its conjugate base or, a weak base and its conjugate acid.That helps maintain a relatively constant pH upon the addition of small amounts of an acid or a base. The pH of a buffer solution can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA]) where,
pKa is the dissociation constant of the weak acid [A-] is the concentration of the conjugate base [HA] is the concentration of the weak acid.In this case, the buffer solution is composed of acetic acid (CH3COOH) and sodium acetate (CH3COONa). The initial pH of the buffer can be calculated as follows:
pH = pKa + log([Na+]/[CH3COOH])
= 4.75
After 0.10 mol of HCl is added, the concentration of H+ ions increases, causing the pH to decrease. The new concentration of H+ ions can be calculated using the equation:
[H+] = [H+]_initial + (Kw/[A-]) x 0.10 where,
Kw is the ion product constant (1.0 × 10^-14). Substituting the values in the Henderson-Hasselbalch equation gives a pH of 4.76.After 0.120 mol of NaOH is added, the concentration of OH- ions increases, causing the pH to increase. The new concentration of OH- ions can be calculated using the equation:
[OH-] = [OH-]_initial + 0.120/volume
Substituting the values in the equation for the pH of a strong base (pH = -log[OH-]) gives a pH of 11.24.
Learn more about the Henderson-Hasselbalch equation here:
https://brainly.com/question/13423434
#SPJ4
what would this frequency become if the person's breathing passage were filled with carbon dioxide instead of air? assume the same temperature dependence for carbon dioxide as for air.
The frequency you are referring to is likely the resonant frequency of the vocal tract, which is responsible for the production of speech sounds.
When we breathe in air, the vocal tract is filled with a mixture of gases, including oxygen, nitrogen, and carbon dioxide, which vibrate at a certain frequency when we speak.
If the person's breathing passage were filled with carbon dioxide instead of air, the resonant frequency of the vocal tract would change. Carbon dioxide has a different acoustic impedance than air, which means that sound waves travel through it at a different speed and with different frequencies.
According to the literature, the speed of sound in carbon dioxide at room temperature (20°C) and standard pressure (1 atm) is about 259 m/s, which is lower than the speed of sound in dry air (about 343 m/s).
However, in general, the resonant frequency of the vocal tract would decrease by a few percent when filled with carbon dioxide instead of air, assuming that the temperature and pressure remain constant.
Learn more about carbon dioxide here:
https://brainly.com/question/3049557
#SPJ4
table salt, nacl(s), and sugar, c12h22o11(s), are accidentally mixed. a 4.00 g sample is burned, and 2.80 g of co2(g) is produced. what was the mass percentage of the table salt in the mixture?
To solve this problem, we need to use the chemical formula of table salt (NaCl) and sugar (C12H22O11).
1 mole of NaCl produces 1 mole of CO2, which has a mass of 44 g. 1 mole of C12H22O11 produces 1 mole of CO2, which has a mass of 44 g. We have 2.80 g of CO2, which is equivalent to 2.80/44 = 0.064 moles of CO2. From 0.064 moles of CO2, we can calculate the amount of NaCl and C12H22O11: 0.064 moles of CO2 is equivalent to 0.064 moles of NaCl, which has a mass of 0.064 x 58.44 g = 3.75 g.
0.064 moles of CO2 is equivalent to 0.064 moles of C12H22O11, which has a mass of 0.064 x 342 g = 21.88 g. The total mass of NaCl and C12H22O11 is 3.75 g + 21.88 g = 25.63 g. The mass percentage of table salt (NaCl) in the mixture is 3.75 g / 25.63 g x 100 = 14.7%.
You can read more about table salt at https://brainly.com/question/5528908
#SPJ4
with the average atomic mass of 35.45 amu, what is the mass of exactly one hundred chlorine atoms in grams?
The mass of exactly 100 chlorine atoms is 3.545g with the average atomic mass of 35.45 amu,
To calculate this, we need to first understand the atomic mass of chlorine.
According to [1], the atomic mass of chlorine is 35.5g per 6.022 x 10^(23) atoms.
This means that one atom of chlorine has a mass of (35.5g)/(6.022 x 10^(23)).
To calculate the mass of 100 chlorine atoms, we must multiply the mass of one chlorine atom with 100,
giving us (35.5g)/(6.022 x 10^(23)) x 100 = 3.545g.
[2] and [3] confirm the atomic mass of chlorine as 35.45 amu.
the product is a single diastereoisomer, and can be determined by examining the relative configurations of the starting materials.
Learn more about chlorine here:
https://brainly.com/question/14962130
#SPJ4
Describe what type of electron transfer happens between these two atoms.
Mg is a metal containing two valence electrons and oxygen is a gas with two non-metals. Mg donate the two electrons to oxygen and form an ionic bond in the compound MgO.
What is ionic bonding ?Ionic bonds are formed between a metal and non metal. Metals are electropositive and easily loss electrons to achieve octet. Non-metals are mostly electronegative and electron deficient and they gain electrons to attain octet in valence shell.
Mg is a second group metal containing two extra electrons in its valence shell. Hence, Mg easily loss these electrons to form Mg²⁺ ions. Oxygen contains 6 valence electrons and it must gain two more to achieve octet.
Therefore, oxygen gain two electrons from Mg and forms O²⁻ . These oppositely charged ions attracts electrostatically and form the ionic bond between the atom. Hence, MgO is an ionic compound.
Find more on MgO:
https://brainly.com/question/15240596
#SPJ1
the aquatic plant elodea was placed in distilled water and a 10% sodium chloride solution. which caused the cells to swell? what keeps the cells from bursting?
Although the cell wall of plants prevents the entire cell from shrinking, the 10% NaCl solution causes the cell membrane to contract.
Why does cells burst when placed in solution?Cells can burst or undergo lysis when placed in a solution that has a higher or lower solute concentration than the cell's cytoplasm. This occurs due to a process called osmosis, which is the movement of water molecules across a selectively permeable membrane from an area of high water concentration to an area of lower water concentration.
If a cell is placed in a hypotonic solution, which has a lower solute concentration than the cytoplasm of the cell, water molecules move from the solution into the cell. This causes the cell to swell and can result in the cell bursting or undergoing lysis.
Learn more about hypotonic solution:https://brainly.com/question/29309024
#SPJ1
A 3.0 L container holds a sample of hydrogen gas at 300 K.
The temperature decreases to 200 K and the pressure remains constant.
What will the volume be?
A)0.1 L
B)0.5 L
C)1.0 L
D)2.0 L
The volume of the hydrogen gas will increase as the temperature decreases to 200 K, so the answer is likely to be greater than 3.0 L.
The volume of the hydrogen gas in the container can be found using the Ideal Gas Law, PV = nRT.
At 300 K, the pressure (P) and number of moles of gas (n) are constant, so the volume (V) and temperature (T) are related by the equation:
V1/T1 = V2/T2
Where V1 is the original volume, T1 is the original temperature, V2 is the new volume, and T2 is the new temperature.
Solving for V2, we get:
V2 = V1 * T2/T1 = 3.0 L * 200 K / 300 K = 2.0 L.
So the volume of the hydrogen gas at 200 K will be 2.0 L.
A 3.0 L container holds a sample of hydrogen gas at 300 K.
The temperature decreases to 200 K and the pressure remains constant.
Learn more about hydrogen here:
https://brainly.com/question/28937951
#SPJ4
a chemist carefully measures the amount of heat needed to raise the temperature of a 0.93 kg sample of a pure substance from -1.1 degree C to 12.2 degree C. The experiment shows that 30. kJ of heat is needed. What is the
specific heat capacity of the substance
The heat energy needed to change the temperature of 0.93 kg of the sample from a temperature of -1.1 to 12.2 °C is 30 KJ. Then the specific heat capacity of the sample is 2.4 KJ/ °C kg
What is calorimetry ?Calorimetry is an analytical technique used to determine the heat energy absorbed or released by a system. The calorimetric equation relating the heat energy q with the mass of the substance m, specific heat c and temperature difference ΔT is given as:
q = m c ΔT.
Given that the mass of the sample = 0.93 kg
temperature difference ΔT = 12.2 - (-1.1 °C ) = 13.3 °C
The heat energy absorbed by the sample is calculated as follows:
30 kJ = 0.93 kg × c × 13.3°C
Then c = 30 kJ/ (13.3°C × 0.93 kg) = 2.4 kJ/°C kg
Therefore, specific heat of the sample is 2.4 kJ/°C kg.
Find more on calorimetry :
brainly.com/question/11477213
#SPJ1
this process was used to remove one electron from potassium. how many different ionization energy bands were found? (ignore effects from spin).
There are two types of ionization energy bands that can be seen when removing one electron from potassium.
These are adiabatic ionization energy (AIE) and vertical ionization energy (VIE). The AIE is the energy required to remove an electron from the highest occupied molecular orbital (HOMO) and the VIE is the energy required to remove an electron from the lowest unoccupied molecular orbital (LUMO).
In general, the AIE is greater than the VIE, but both energies can vary depending on the environment of the atom.
Adiabatic ionization energy (AIE) is the minimum energy required to remove an electron from an atom or molecule in its ground state. In other words, it is the energy required to completely ionize an atom or molecule.
AIE is typically measured in electron volts (eV). AIE is an important concept in theoretical chemistry, as it can be used to calculate the energy of molecules or atoms in their ground state. In addition, AIE can be used to compare the energy of different molecules and atoms, which can lead to an understanding of their relative stabilities and reactivities.
Learn more about ionization energy :
https://brainly.com/question/20658080
#SPJ4
if two electrodes have a source of potential difference of 100v connected to them, how many equipotential surfaces exist in the space between them?
If two electrodes have a source of potential difference of 100v connected to them, there will be infinite number of equipotential surfaces exists in space between them.
What is equipotential surface ?The surface on which all points have equal potential is known as equipotential surfaces. The points having the same potential under an electric field are called equipotential points. Similarly the connecting two equipotential points are called equipotential lines.
Now these all points if lie on a surface that surface is referred to as equipotential surface. Distribution of these points depends on the potential they have.
Two equipotential surfaces never intersect each other. Now, if two electrodes are connected to a 100 V source, there will be infinite number of equipotential surfaces within the space between them.
Find more on equipotential surfaces:
https://brainly.com/question/14675095
#SPJ1
Marisol pours water into a large oven-safe glass bowl until it is about one-fourth full. She then places a small, heavy
cup inside the glass bowl. The cup is heavy enough that it does not float. She makes sure that no water enters the
small cup when she places it in the bowl. She then places the oven-safe bowl with the water and cup on an electric
burner. Finally, she turns the burner on to low.
Part A
What will happen to the water in terms of phase changes when Marisol turns on the stove
The water in the glass bowl will start to heat up and eventually reach its boiling point, causing it to change from a liquid to a gas (water vapor) through the process of boiling.
When Marisol turns on the stove, the electric burner will heat up the glass bowl containing the water. As the temperature of the water increases, its molecules will gain more and more energy, causing them to move faster and faster.
At a certain temperature, called the boiling point, the water will start to turn into water vapor (steam) as its molecules escape from the surface of the liquid and turn into gas. This is called boiling and it's a phase change from a liquid to a gas.
The small, heavy cup in the bowl will not float because it is denser than water and will remain in the same position.
Learn more about boiling:
https://brainly.com/question/28203474
#SPJ4
AgCl is found to have 78.1% ionic character, and its gas phase dipole moment is 11.5 D. What is the distance between the Ag and Cl atoms in gaseous AgCl?
please explain how as well
Answer:
The ionic character of a compound can be used to determine the bond polarity, and the gas phase dipole moment can be used to calculate the bond length. The equation for the bond length (r) in terms of the bond polarity (p) and the bond dipole moment (μ) is given by:
r = (μ) / (4πpε_0p)
Where ε_0 is the vacuum permittivity and p is the bond polarity.
For AgCl, the bond polarity can be calculated from the ionic character:
p = 78.1%
So, substituting the values into the equation, we get:
r = (11.5 D) / (4π * 0.781 * 8.854 x 10^-12 C^2/Nm^2) = 2.8 x 10^-10 m
So the distance between the Ag and Cl atoms in gaseous AgCl is approximately 2.8 x 10^-10 meters.
Explanation:
convert 18.2 g of NiO to mols.
The term mole concept is used here to determine the number of moles of NiO. Here 18.2 g of NiO contains 0.243 moles.
What is a mole?One mole of a substance is defined as that quantity of it which contains as many entities as there are atoms exactly in 12 g of carbon - 12. The formula used to calculate the number of moles is:
Number of moles = Given mass / Molar mass
Here the given mass of NiO is 18.2 g and the molar mass is 74.6928 g/mol. The mass of one mole of molecules of a substance is known as the molar mass. It is expressed in gmol⁻¹.
Then 18.2 g of NiO is converted into moles as:
Number of moles = 18.2 g/ 74.6928 g/mol = 0.243 moles.
Thus 18.2 g of NiO is converted into 0.243 moles.
To know more about the mole concept, visit;
https://brainly.com/question/15209553
#SPJ1
A balloon filled with helium gas has a volume of 5 L and 112 moles, Assuming that the temperature and pressure is constant, how many moles would a 13 L sample contain?
Answer: Summary: The volume (V) of a gas changes inversely with the pressure (P) of the gas if there is no change in the temperature and the amount of gas.
Explanation:
Hope this helped with your question! Also, i am happy to help!
explain the historical context of a law from the list provided. why was this law significant? explain how our understanding of
It is necessary to study history in order to comprehend the current state of the law, and from this we may deduce that the context of legal history helps us to comprehend contemporary law.
Legal history, sometimes known as the history of law, is the study of how and why the law has changed over time. The advancement of civilizations is strongly related to the development of legal history, which operates in a larger social history context. Legal history, as defined by some jurists and legal process historians, is the technical explanation of how laws have changed over time and the recording of the evolution of those laws, with the goal of better understanding the roots of various legal concepts. Some people regard legal history as a subfield of intellectual history. Twenty-first-century historians have a more contextualized perspective on legal history, more in line with social historians' ideas.
Learn more about history here:
https://brainly.com/question/17457422
#SPJ4
what is the empirical formula of a compound which, when analyzed, contained 69.42 %c, 11.57 % nitrogen, 13.22 % oxygen, and the rest, hydrogen?
The empirical formula of a compound can be determined by finding the simplest whole-number ratio of the atoms present in the compound. To do this, the percentage composition of each element in the compound must first be converted into its corresponding mass.
In this case, the percent composition data for each element can be converted to moles by dividing each value by the atomic mass of the element in question. For example, for carbon: 69.42 g C / (12.01 g/mol) = 5.787 mol C.For nitrogen: 11.57 g N / (14.01 g/mol) = 0.823 mol N.For oxygen: 13.22 g O / (16.00 g/mol) = 0.826 mol O
Next, the moles of each element is divided by the smallest number of moles of the elements present to obtain the simplest whole-number ratio of atoms in the compound. In this case, the smallest number of moles is 0.823 for nitrogen.
For example 5.787 mol C / 0.823 = 6.98 (round down to 6). 0.823 mol N / 0.823 = 1.00 (unchanged).0.826 mol O / 0.823 = 1.00 (unchanged)
Therefore, the empirical formula of this compound is C6HNO, where C represents 6 carbon atoms, H represents an unknown number of hydrogen atoms, N represents 1 nitrogen atom, and O represents 1 oxygen atom.
You can read more about empirical formulas at https://brainly.com/question/1439914#:
#SPJ4
Select the conversion factors needed to convert the distance in meters to inches 84.2m*=3310in
The conversion factor to convert any distance of meters into inch is by multiplying the distance in meters by 39.37.
One meter is near about equal to 39.3700787402 inches. Inches and meters both are units to measure the distance. Let's break it down. We know there are 12 inches in a foot and there are about 3.281 feet in a meter and there is 39.37 inches in a meter.
Now, let's see how many feet are in 4 meter. To do that we are going to multiply the number of feet in one meter times four. So, 4 × 3.281, that equals 13.124.
Learn more about distance:
brainly.com/question/26711747
#SPJ4