hich of these statements best explains cluster sampling?
a.) In the cluster sampling method, elements are randomly selected from the total population.
b.) In the cluster sampling method, total population is roughly divided into groups based on location and a simple random sample of the groups is taken.
c.) In the cluster sampling method, population is broken into groups and then elements are randomly selected in proportion from each group.
d.) The cluster sampling method is a combination of random sampling techniques.

Answers

Answer 1

The correct option is b) In the cluster sampling method, population is broken into groups and then elements are randomly selected in proportion from each group.

What is cluster sampling method?

A probability sampling technique known as "cluster sampling" involves randomly selecting some of a population's clusters—such as districts or schools—to serve as your sample. Ideally, each cluster should be a miniature representation of the population as a whole.

Hence answer option will b only.

To learn more about cluster sampling from the given link

https://brainly.com/question/11003935

#SPJ4


Related Questions

The solid cylinders AB and BC are bonded together at B and are attached to fixed supports at A and C. Knowing that the modulus of rigidity is 3. 7 x 106psi for aluminum and 5. 6 x 106psi for brass, determine the maximum shearing stress (a) in cylinder AB, (b) in cylinder BC

Answers

The maximum shearing stress in cylinder AB can be determined by using the equation τ = Gδ/h, where G is the modulus of rigidity, δ is the total deformation, and h is the height of the cylinder.

For aluminum, G = 3.7 x 106 psi and for brass, G = 5.6 x 106 psi. For cylinder AB, δ is found by subtracting the length of AB from the total length of the cylinders. For cylinder BC, δ is found by subtracting the total length of AB and BC from the total length of the cylinders. Once δ and h are known, the maximum shearing stress can be calculated for each cylinder.

Learn more about The solid cylinders:

https://brainly.com/question/18648373

#SPJ4

The output stage of a TTL gate is a special design called
a. multiemitter b. totem-pole.
c. MSI d. DIP.

Answers

The output stage of a TTL gate is a special design called DIP. the reduction in propagation delay caused by the addition of an active pull-up circuit at the gate's output.

What is TTL gate?A logic family made up of BJTs is called the Transistor-Transistor Logic (TTL) (bipolar junction transistors). The transistor performs two tasks, including logic and amplification, as its name would imply. The 7402 NOR Gate and the 7400 NAND Gate are two of the greatest logic gates used in TTL applications.Using bipolar transistors to control direct-current pulses, transistor-transistor logic (TTL) is a type of digital logic system. Typically, a single integrated circuit will have many TTL logic gates (IC). Typically, four-digit TTL ICs have numbers that start with 74 or 54.To a TTL inverter circuit, an additional input can be added to create a TTL NAND gate. It is possible to turn a NAND gate circuit's output into an AND gate by including an inverter step.

To learn more about TTL gate refer to:

https://brainly.com/question/16983500

#SPJ4

72 joules of energy are delivered to a load in one hour. what is the average power? enter your answer in mw rounded to the nearest integer.

Answers

Answer:

  20 mW

Explanation:

You want to know the average power in milliwatts represented by 72 J per hour.

Unit conversion

1 J/s = 1 W

  [tex]\dfrac{72\text{ J}}{1\text{ h}}=\dfrac{72\text{ J}}{1\text{ h}}\times\dfrac{1\text{ h}}{3600\text{ s}}\times\dfrac{1\text{ W}}{1\dfrac{\text{J}}{\text{s}}}\times\dfrac{1000\text{ mW}}{1\text{ W}}=\dfrac{72\times1000}{3600}\text{mW}\\\\=\boxed{20\text{ mW}}[/tex]

massive irrigation programs can also impact underground water supplies. describe one negative impact that irrigation might have on those supplies.

Answers

Excessive irrigation can cause contaminants to enter the aquifers or watercourse by leaching through the soil or overland runoff.

Irrigation is the controlled perspective of water for agricultural purposes through manmade systems to supply water requirements not satisfied by rainfall.

Excessive irrigation can cause contaminants to enter the brook or canal by leaching. The heavy soils that have low infiltration rates are susceptible to a runoff if the irrigation system applies water at a rate greater than the applied water can infiltrate the soil.

Water overflow can even raise the risk of waterborne illnesses.

Learn more about irrigation at:

brainly.com/question/12820487

#SPJ4

what value could ven derive from the analytics capabilities being embedded in a state-of-the-art tms?

Answers

A state-of-the-art transportation management system (TMS) with embedded analytics capabilities can bring significant value to an organization in several ways.

How TMS ith embedded analytics capabilities can be beneficial?

Overall, the integration of analytics capabilities into a TMS can bring significant value to an organization by improving visibility, optimization, customer service, data-driven insights, and compliance.

Improved Visibility: The TMS can provide real-time visibility into transportation operations, enabling organizations to make informed decisions on shipping routes, delivery times, and carrier selection.

Enhanced Planning and Optimization: The analytics capabilities can help organizations to optimize their transportation plans, reducing transportation costs and increasing efficiency.

Improved Customer Service: With real-time data and visibility, organizations can provide better customer service by providing accurate delivery estimates and tracking information.

Data-Driven Insights: The TMS can collect and analyze large amounts of data, providing organizations with valuable insights into their transportation operations and helping them identify areas for improvement.

Increased Compliance: The TMS can help organizations stay compliant with regulations and industry standards, reducing the risk of fines and improving their reputation.

To know more about embedded analytics, visit: https://brainly.com/question/14836632

#SPJ4

non-volatile memory is temporary and loses its contents when the power is turned off. T/F

Answers

Answer:

False

Explanation:

Non-volatile memory is a category of memory that retains its data even when the system is turned off or the power is off. It is sometimes referred to as static or permanent memory. For example, hard disk. Therefore, the given statement is false.

Answer:

TRUE

Explanation:

Volatile memory is memory or storage that loses its data when the computer's power is switched off. Volatile memory is a nonpermanent memory because when the power is off it loses its contents.

Example: Random Access Memory (RAM) is an example of volatile memory.

On the other hand, nonvolatile storage does not lose its contents when the computer power is switched off

Example: Read-only memory(ROM) is one example of Non-volatile storage.

Hence the given statement is "True".

which of the following statements could be used to generate a random number between 1 and 9, inclusive, and assign it to the variable dice? lint dice = (int) Math.random() * 9; II. int dice = Math.random() * 9 + 1; III. int dice = (int) (Math.random() * 9) + 1; OI only Oll only lll only O I, II, and III I and II only

Answers

For the variable dice is lint dice = (int) Math, statements could be used to create a random number between 1 and 9, inclusive. 9 in Random(); II. int dice = Math Only I and II of Random() * 9 + 1.

What is could statement?An engineering challenge is described in a problem statement, which is a brief summary. The generalized form of a problem statement is a project proposal. The engineering and the client or teacher negotiate a contract known as a problem description. This is your chance to introduce yourself to the admissions committee through your engineering personal statement. Your passions, professional aspirations, and achievements can all be mentioned in the personal statement. Because they dislike going outside in poor weather and because there are occasions when people are unable to take their dogs outside, dogs require a way to use the restroom inside of homes. Erasers are messy and don't completely remove the chalk from chalkboards, so teachers need a better solution.

To learn more about could number refer to:

https://brainly.com/question/29841997

#SPJ4

What is word frequency method java?

Answers

Answer:

used to get the number of elements in the specified collection equal to the specified object.

Explanation:

The frequency() method of Java Collections class is used to get the number of elements in the specified collection equal to the specified object.

What is word frequency method?The word frequency effect is a psychological phenomena in which words that are encountered more frequently than words that are seen less frequently are recognized more quickly. Word frequency varies depending on how well-versed a person is in the tested language. To count the instances of an object in a given collection, utilize the frequency() function of the Collections class. Before using the frequency() function, as demonstrated below, you must import the util package because collections are specified in the util package in Java. bring in java. util. The number of elements in the supplied collection that match the specified object can be found using the frequency() method of the Java Collections class.

To learn more about Java refer to:

https://brainly.com/question/26789430

#SPJ4

marcus checks a new direct expansion (dx) coil and finds no pressure present. what should he do?

Answers

marcus checks a new direct expansion (dx) coil and finds no pressure present. what should he do

Marcus should check for any blockages or restrictions in the system, as well as check for any leaks in the system.

What is system?

A system is an organized collection of components or elements that work together to achieve a common goal. It is an interdependent group of elements that interact to accomplish a specific purpose or task. Examples of systems include the human body, a manufacturing plant, an ecosystem, a computer system, and a city. Systems have components that interact to form a unified whole; they are not simply collections of discrete parts. The components of a system are connected through a set of relationships and processes, and they are regulated by feedback loops.

He should also check the power supply to the coil and ensure that it is on and working correctly. If there is still no pressure present, Marcus should contact a professional to inspect the system further and identify the source of the problem.

To learn more about system
https://brainly.com/question/28717367
#SPJ4

the joint force engineer manages several engineering functions which include:

Answers

The correct answer is The combined force engineer oversees a number of engineering tasks, such as: (1) Scheduling and directing the execution of.

The Air Force and Navy are basically the only branches that offer major computer science work, despite the fact that all branches offer information technology training and professions that are excellent prerequisites for the hard-core business of computer science.

These professionals design, create, evaluate, and write programmes that are essential to our ability to wage war. They make sure we have the software and programmes required to carry out our duties successfully, from maintenance tracking applications to tools that organise and show intelligence data. Finding your first job can be challenging if you want to work as a software developer. Getting an interview involves a number of criteria.

To learn more about force engineer  click on the link below:

brainly.com/question/12172770

#SPJ4

Aâ high-volume manufacturing process typically means all of the followingâ EXCEPT:
A.
greater capital intensity.
B.
less resource flexibility.
C.
more customer involvement.
D.
aâ line, orâ continuous, process.

Answers

A high-volume manufacturing process typically means more customer involvement.

A manufacturing process turns raw materials into completed goods by utilizing production techniques, operations scheduling software, equipment, and personnel. The majority of enterprises that produce items will fall into one of these five groups, and there are generally five manufacturing processes.

According on the specific items they offer, their company's ethos, and the facilities and resources they have access to, each business will have a slightly different approach to how that works.

Five Different Manufacturing Processes:

Manufacturing on a Repeat Basis

Job Shop Manufacturing

Discrete Manufacturing

Manufacturing using a batch process

Controlling the Production Process

Your manufacturing industry and the kind of product you want to produce will influence the manufacturing technique you select. Occasionally, if you want to build an innovative product, a hybrid manufacturing method that incorporates different manufacturing techniques can be helpful.

Learn more about manufacturing process:

https://brainly.com/question/28384697

#SPJ4

An ideal single-phase source, 230 V, 50 Hz, supplies power to a load
resistor R = 40 ohm via a single ideal diode. Calculate the average and rms
values of the current and the power dissipation. What must be the rating
of the diode?

Answers

The rating of the diode must be at least 5.75 A.

The voltage across the resistor is given by V = 230 V and the resistance is R = 40 ohms, so the current flowing through the resistor can be calculated using Ohm's Law:

I = V / R = 230 / 40 = 5.75 A

The average value of the current is the same as its rms value, which is I = 5.75 A.

The power dissipation in the resistor can be calculated using P = IV, where I = 5.75 A and V = 230 V:

P = IV = 5.75 * 230 = 1321.5 W

Since the diode is ideal, it does not have any voltage drop, so the voltage across it is always equal to the source voltage, which is 230 V. The maximum current rating of the diode must be greater than or equal to the maximum current that flows through the resistor, which is 5.75 A.

Learn more about electrical energy here: https://brainly.com/question/29032441

#SPJ1

ise ebook online access for principles and applications of electrical engineering solution manual

Answers

The country-of-origin principle has been accepted in the United States to determine which nation's laws should be used in international online disputes.

Honesty, equality, respect for rights, integrity, and loyalty to the law are some examples of ethical values. Yes, because these characteristics are crucial elements that influence both society as a whole and professions like engineers, these concepts also apply to society in general. If we talk about society, an unethical person in the society can also hurt the entire society, much like unethical behavior can result in a corporation closing down if the public ultimately turns against it. Online dispute resolution is the process of resolving disputes between parties using technology (ODR). ODR was first used in commercial settings, such as disputes involving buyers and sellers on online marketplaces like eBay. However, courts have recently begun utilizing technology to expedite case processes.

Learn more about ODR here:

https://brainly.com/question/29602937

#SPJ4

FILL IN THE BLANK. the ___ provides the essential function of connecting the electrical system, equipment, or both to the earth.

Answers

The ground provides the essential function of connecting the electrical system, equipment, or both to the earth.

The ground provides the essential function of connecting the electrical system, equipment, or both to the earth. The ground acts as a reference point for the electrical system and helps to ensure that electrical charges are safely and effectively conducted away from the equipment and into the earth.

Having a proper electrical ground is important for safety reasons, as it helps to prevent electrical shock, fire, and other hazards that may result from electrical faults or surges. Additionally, the ground helps to ensure that the electrical system operates correctly and provides reliable power to the equipment.

In electrical systems, the ground is typically achieved through a metal rod or plate that is driven into the earth, or through a metal conduit that is connected to the earth. The electrical system is then connected to the ground, providing a safe and reliable reference point for the electrical system.

Learn more about electrical shock here:

https://brainly.com/question/1167862

#SPJ4

an electric field diagram for an unknown arrangement of charges is shown. at which of the labeled points is the electric field strongest?

Answers

The correct response is Y. The labeled points is the electric field strongest at Y.

The physical environment that surrounds electrically charged particles, known as an electric field (or E-field), exerts force on all other charged particles in the field, either attracting or repelling them. This phrase also refers to the physical field of a system of charged particles. when charge is present in any form, a characteristic of electricity that is related with each location in space. The value of E, which also specifies its magnitude and direction, defines the electric field, sometimes referred to as the electric field strength, electric field intensity, or simply the electric field. The electric field is the region of space around a charged particle or item that acts as a force on it. For instance, charges and their combinations can produce electric fields.

Learn more about electric field here

https://brainly.com/question/14372859

#SPJ4

The diagram shows the electric field in the vicinity of a charge.

At which point is the electric field strongest?

W

X

Y

Z

A customer is shopping for tires and wants advice from a technician on selecting tires. Technician
A states that the Uniform Tire Quality Grading (UTQG) system should be referenced since it will
approximate tire performance and life. Technician B states that the type of driving, speed, vehicle
weight, and traction demands should be considered when choosing a tire. Who is correct?

Answers

A customer is shopping for tires and wants advice from a technician on selecting tires. Neither of the technicians is correct.

What is the Uniform Tire Quality Grading (UTQG) system?

The U.S. Department of Transportation developed a standard known as UTQG, which stands for Uniform Tire Quality Grading (DOT). Customers can compare tires using a technique that takes temperature, traction, and treadwear into account.

In other words, the UTQG is a helpful tool that can direct you to the proper set of tires when you're purchasing.

Therefore, neither of the technicians is correct.

To learn more about (UTQG), refer to the link:

https://brainly.com/question/7199411

#SPJ1

someone writing a script to read data from more memory area than the data structure is stored in, is an example of a buffer overflow

Answers

When software or a process attempts to write more data to something like a fixed-length memory block, or buffer, than the buffer is allocated to hold, a buffer overflow occurs.

This mistake happens when a buffer is unable to keep all of the data, causing data to overflow into neighboring storage. This flaw has the ability to crash the system or, worse, to serve as a gateway for a cyberattack. A buffer overflow happens when software attempts to enter data into a memory location past the buffer or puts more data into a buffer than the buffer can manage.

The Primary Distinction Between Stack and Heap Memory

Heap is a hierarchical data structure, whereas Stack is a linear data structure.

Stack memory is never fractured, however heap memory can become fragmented when memory chunks are allocated and subsequently removed.

Stack only enables you to access local variables, but Heap allows you to access variables worldwide.

Learn more about variables from here ;

https://brainly.com/question/28850837

#SPJ4

what is the time constant for a coil of 33 mh and a resistor of 2 kω?

Answers

The resistance (R) and capacitance (C) are multiplied to get the time constant for an RC circuit, that in this case would be:[tex]τ = R * C = 2 kΩ * 33 mH = 66 ms[/tex]

How much  time is taken by the resistance and capacitance ?

After a step voltage difference is applied to the circuit, the time constant determines how long it will take the capacitance across the capacitor to reach around 63.2% of its final value.

A material thing or device's capacitance is its ability to hold electric charge. The ratio of those two quantities is used to calculate the change in charge in response to a change in electric potential. Two concepts of capacitance that are widely understood are self capacitance and mutual capacitance. [1]: 237–238 Self capacitance is a characteristic of electrically charged objects that can be seen by measuring the electric potential between the charged object and ground. When two components are measured for mutual capacitance, which is a fundamental linear electronic component used to increase capacitance in an electric circuit, the capacitor, its function becomes very critical.

To know more about voltage visit:-

https://brainly.com/question/8684141

#SPJ4

Answer to on page, Identify with brief definition of the 7-key-words risk for system engineering in your courses MEM508,, and how are they related

Answers

Identify with brief definition of the 7-key-words risk for system engineering in your courses  are; Risk Management, System Analysis, Quality Assurance, Requirements Analysis, Design, Testing.

What is the Quality Assurance ?

Quality Assurance (QA) is the systematic process of determining whether products meet or exceed customer expectations. Quality assurance focuses on improving the processes to deliver quality products or services. It involves planning, implementing, assessing, and controlling activities and processes. Quality assurance is a vital element to ensure the quality of products and services. Quality assurance activities include developing quality management plans, establishing quality objectives, implementing quality control systems, designing and performing quality assurance tests, and collecting, analyzing, and reporting quality data. Quality assurance also includes managing customer feedback and complaints. Quality assurance is a continuous and ongoing process and should be part of an organization’s overall strategy and culture. Quality assurance is essential to ensure that products and services meet customer requirements and expectations.

To learn more about system engineering

https://brainly.com/question/13390630

#SPJ4

The disk A is at the midpoint of the sloped surface. The string from A to B exerts a 0.2-Ib force F on the disk. If you express F in terms of vector components parallel and normal to the sloped surface. (a) What is the component normal to the surface? b) What is the component parallel to the surface?

Answers

It is the area or piece of the thing where an observer can first perceive it through touch and sight and where other materials first come into contact with it.

What is surface?With the exception of the Surface Duo, which runs on Android, the Microsoft Surface line of touchscreen-based personal computers, tablets, and interactive whiteboards was created and developed by Microsoft. A surface is the outermost or highest layer of a physical object or place, to use the term in its most common usage. It is the area or piece of the thing where an observer can first perceive it through touch and sight and where other materials first come into contact with it. A surface computer communicates with users through a common object rather than a monitor and keyboard. The surface of a device is touched or dragged to enter commands with bare hands.

Consider a line on the sloped surface from A perpendicular to tr surface. (see the diagram above) By SIMILAR triangles we see th one such vector is [tex]$\mathbf{r}_N=8 \mathbf{j}+2 \mathbf{k}$[/tex]. Let us find the component of [tex]$\mathbf{F}$[/tex] parallel to this line.

The unit vector in the direction normal to the surface is

[tex]$$\mathbf{e}_N=\frac{\mathbf{r}_N}{\mid \mathbf{r}_N}=\frac{8 \mathbf{j}+2 \mathbf{k}}{\sqrt{8^2+2^2}}=0.970 \mathbf{j}+0.243 \mathbf{k}$$[/tex]

The unit vector [tex]$\mathbf{e}_{A B}$[/tex]can be found by

[tex]$$\mathbf{e}_{A B}=\frac{\left(x_B-x_A\right) \mathbf{i}+\left(y_B-y_A\right) \mathbf{j}+\left(z_B-z_A\right) \mathbf{h}}{\sqrt{\left(x_B-x_A\right)^2+\left(y_B-y_A\right)^2+\left(z_B-z_A\right)^2}}$$[/tex]

Point B is at [tex]$(0,6,0)(\mathrm{ft})$[/tex] and A is at [tex]$(5,1,4)(\mathrm{ft})$[/tex].

Substituting, we get

[tex]\mathbf{e}_{A B} & =-0.615 \mathbf{i}+0.615 \mathbf{j}-0.492 \mathbf{k} \\[/tex]

[tex]\text { Now } \mathbf{F} & =|\mathbf{F}| \mathbf{e}_{A B}=(0.2) \mathbf{e}_{A B} \\[/tex]

[tex]\mathbf{F} & =-0.123 \mathbf{i}+0.123 \mathbf{j}-0.0984 \mathbf{k}(\mathrm{lb})[/tex]

The component of[tex]$\mathbf{F}$[/tex] normal to the surface is the component parallel to the unit vector [tex]$\mathbf{e}_N$[/tex].

[tex]$$\mathbf{F}_{\mathrm{NORMAL}}=\left(\mathbf{F} \cdot \mathbf{e}_N\right) \mathbf{e}_N=(0.955) \mathbf{e}_N$$[/tex]

[tex]$\mathbf{F}_{\mathrm{NORMAL}}=0 \mathbf{i}+0.0927 \mathbf{j}+0.0232 \mathbf{k} \mathrm{lb}$[/tex]

The complete question is,

The disk A is at the midpoint of the sloped surface. The string from A to B exerts a [tex]$0.2-\mathrm{lb}$[/tex] force [tex]$\mathbf{F}$[/tex] on the disk. If you resolve[tex]$\mathbf{F}$[/tex] into vector components parallel and normal to the sloped surface, what is the component normal to the surface?

To learn more about surface refer to:

https://brainly.com/question/1297098

#SPJ4

If the owner decides to increase the living room dimensions by 20%, what is the new length and width of the living room floor?.

Answers

The original length and width of the living room floor were 10 ft x 12 ft.

The new length and width of the living room floor would be 12 ft x 14.4 ft.

If the owner decides to increase the living room dimensions by 20%, the new length and width of the living room floor would be 12 ft x 14.4 ft. This is because the 20% increase would be 2 ft for the length and 2.4 ft for the width. Therefore, the new length would be 10 ft + 2 ft = 12 ft, and the new width would be 12 ft + 2.4 ft = 14.4 ft. This would increase the area of the living room from 120 ft2 to 168 ft2, a 40% increase from the original area.

Learn more about increasing: https://brainly.com/question/21060738

#SPJ4

can you count from 000 to 111 in binary

Answers

Explanation:

Yes, here is a list counting from 000 to 111 in binary:

000

001

010

011

100

101

110

111

yes it is very easy to count from 000 to 111in 20 second , it is because in binary representation there is a patter known as sorted pattern.

How high can I count in binary?In finger binary, binary numbers are counted and shown on the fingers of one or both hands. One binary digit or bit is represented by each finger. This enables counting up to 25 or 210 using the fingers on one hand to count from 0 to 31, or 1023 using the fingers on both hands. Binary counting begins with 0 and moves to 1 after that. Then, you add a further digit, just as you would when going from 9 to 10 in decimal counting. You now have two digits after adding one more. Since 1 is the last number you can count on, binary goes from 1 to 10.Even though you can reach the number 1023 with just ten digits, we'll just use our eight fingers to count up to 255, which is 128+64+32+16 (left hand palm up, pinky is 16) +8+4+2+1. (right hand palm-down, pinky is 1). Raise the 1 finger to signify one.

To learn more about binary representation refer to:

https://brainly.com/question/1426152

#SPJ4

Which of the following are external, and help you foresee what you may be facing in the industry?

Answers

A SWOT analysis is intended to help you take a practical, fact-based, and data-driven look at the advantages and disadvantages of a company, its efforts, or its sector.

The organization must avoid preconceived notions or gray regions and concentrate on real-life settings in order to maintain the analyses' accuracy. Companies should use it as a reference rather than a strict prescription.

SWOT analysis is a method of strategic planning that offers evaluation tools.

Fact-based analysis, new viewpoints, and innovative ideas result from the identification of fundamental strengths, weaknesses, opportunities, and threats.

A SWOT analysis gathers data from internal sources (the company's strengths and weaknesses) as well as from outside factors that could have an uncontrollable impact on decisions (opportunities and threats).

To learn more about the industry the given link:

https://brainly.com/question/7721379

#SPJ4

Please answer the question.

Answers

In a gas absorption experiment a viscous fluid flows upward through a ... Set up a momentum balance over a shell of thickness Δrin the film.

What is gas absorption experiment ?

The previous chapter provided derivations of the relationships for mass and momentum conservation—the equations of motion—in rectangular, cylindrical, and spherical coordinates.

All experimental evidence suggests that these are the most fundamental equations of fluid mechanics, and that they govern any situation involving the flow of a Newtonian fluid in principle.

Therefore, In a gas absorption experiment a viscous fluid flows upward through a ... Set up a momentum balance over a shell of thickness Δrin the film.

Learn more about momentum on:

https://brainly.com/question/24030570

#SPJ1

if saturated liquid water at 220f is evaporated to a saturated vapor in a constant pressure process the volume is increased by what factor?

Answers

The volume is increased by a factor of 33.8 when saturated liquid water at 220F is evaporated to a saturated vapor in a constant pressure process.

What is saturated vapor?

Saturated vapor is a type of vapor that has reached equilibrium with its liquid phase and is at a state of maximum water vapor pressure. It occurs when the air is completely saturated with water vapor, meaning it can no longer hold any additional water molecules in the air.

The volume of a gas is much greater than that of a liquid, so when saturated liquid water at 220F is evaporated to a saturated vapor, the volume increases significantly. To calculate the exact factor by which the volume is increased, we need to calculate the specific volume of the water vapor (the volume per unit mass) at 220F and compare it to the specific volume of the liquid water at the same temperature.

At 220F, the specific volume of liquid water is 0.00105 ft^3/lb and the specific volume of water vapor is 0.0354 ft^3/lb. This means that the volume of the water vapor at 220F is 33.8 times greater than the volume of the liquid water at the same temperature. Therefore, the volume is increased by a factor of 33.8 when saturated liquid water at 220F is evaporated to a saturated vapor in a constant pressure process.

To learn more about saturated vapor

https://brainly.com/question/15114852

#SPJ1

how the components of design are a necessary aspect of software engineering

Answers

The components of design are a necessary aspect of software engineering because they help ensure that the software is structurally sound, easy to use, and meets the needs of the user.

Importance of  software

Software is a set of instructions or programs that tells a computer how to perform a specific task or set of tasks. It usually refers to programs stored in the computer’s memory which control its operations, such as operating systems, utilities, device drivers, and application programs. Software is a fundamental part of modern technology and is used in almost every aspect of our lives. It is used to control and manage the hardware and software components of computers, phones, tablets, and other devices. Software is essential to the efficient functioning of today’s economy, from the simple tasks of accounting to the complex operations of large organizations. It has become an essential tool for businesses to improve efficiency and productivity, and to remain competitive in a rapidly changing world.

To know more about software
https://brainly.com/question/1022352
#SPJ4

Which of the following is a true statement concerning the production of electricity in conventional nuclear power plants using fission reactors?
A. New nuclear power plants will be built without containment structures, due to the increased insulation in the reactor core.
B. Thermal energy is converted into mechanical energy and then to electrical energy, as in coal-burning power plants.
C. Regularly scheduled releases of radioactive gases during production are well below the maximum contamination levels set by the EPA (Environmental Protection Agency).
D. Nuclear production of electricity is much less expensive per kilowatt-hour than production of electricity at a coal-burning or natural- gas-fueled power plant.
E. Storage of nuclear waste is no longer an issue, because power plants are now storing all wastes on-site in specialized containment units.

Answers

Thermal energy is converted into mechanical energy and then to electrical energy, as in coal-burning power plants.

What is Thermal energy?The movement and transfer of heat energy is the focus of the specific subfield of thermal engineering in mechanical engineering. The energy can be changed into different types of energy or transported between two different media.The movement and transfer of heat energy is the focus of the specific subfield of thermal engineering in mechanical engineering. The energy can be changed into different types of energy or transported between two different media. Thermal engineering focuses on heat transfer, fluid mechanics, and heating and cooling systems, such as those used in the electric power business, the automotive industry, and the heating, ventilation, and air conditioning (HVAC) industry. Thermal energy is the motion of molecules within a material or an item.

To learn more about Thermal energy refer to:
https://brainly.com/question/29991350

#SPJ4

A common form of social engineering is someone pretending to be an authorized user or administrator in an attempt to gain illicit access to protected data.TrueFalse

Answers

The statement is True. Social engineering is a tactic used to manipulate people into giving out confidential information or granting access to restricted resources.

Social engineering is a common form of attack used by malicious actors that seeks to exploit the trust and confidence of unsuspecting users. It typically involves the use of deceptive tactics such as:

Phishing, Pretexting, Baiting, and Tailgating to obtain confidential information or gain unauthorized access to restricted resources.

These attacks rely on the human element, as they rely on users being unaware of the malicious intent, making them particularly difficult to detect and prevent. To protect against social engineering attacks, organizations should educate their employees on social engineering tactics and regularly test their security measures.

Learn more about social engineering: https://brainly.com/question/26072214

#SPJ4

how would you distinguish between engineering management and management in general?

Answers

Engineers make decisions based upon their knowledge and skills whereas decisions of a manager are based upon many constraints such as capital, process, and his team and so on.

An engineer performs individual tasks whereas a manager is involved in planning, leading, controlling, and organizing.

What are engineers?

Engineers, as engineering practitioners, are professionals who invent, design, analyze, build and test machines, complex systems, structures, devices and materials to meet functional goals and requirements, taking into account the constraints of practicality, regulation, safety and costs.

To know more about engineers, click the link given below:

https://brainly.com/question/19117846

#SPJ4

Power steering and power brakes will not function as they normally do when the engine stalls.

Answers

Keep your foot on the brakes until you've cleared the object if you want to avoid driving over it, such a mattress or plank. Traffic congestion is a major cause of collisions.

What is an engine stalls?It is frequently used to describe the situation where an engine abruptly stops running and spinning. It could occur as a result of inadequate fuel, air, energy, or electric spark, fuel hunger, a mechanical issue, or in response to an unexpected rise in engine load. The partial breakdown of airflow through an engine is referred to as stall. It is a gradual condition that might result in surge, which is the complete cessation of airflow through the engine. Surge can, in rare circumstances, cause the airflow direction to change. The stall is caused by the breakdown of the steady airflow over the wing into a turbulent one, which lowers lift. The lift can no longer carry the weight of the aircraft to its maximum capacity, and the aircraft sinks.

To learn more about engine stalls refer to:

https://brainly.com/question/17405296

#SPJ4

Other Questions
you are installing windows server 2019 standard edition. setup has automatically restarted after completing the installation process. what is the first thing that you must perform after restart? Q1) with the aid of a diagram, analysis the concept of: Aggregate demand, and Aggregate supply fixed annuities provide each of the following except The measures of the angles in triangle UVW are shown in the diagram.What is the value of x ? Categorize each description below under the principle that describes that particular behavior of fluids.Descriptions:Describes hydraulic liftsDescribes airplane flightDescribes floating objectsBuoyant force equals weight of fluid displacedPressure decreases as a fluid moves fasterPressure is the same throughout an enclosed fluidPrinciples:Archimedes' principleBernoulli's principlePascal's principle A primary purpose of adjusting entries is to record events that? steven is a department supervisor. one of his duties is to conduct annual performance evaluations for his nine employees. this is an example of what concept? A woman drives to her office 10 km away from her house at 9 a. M. And reaches her office at 9:20 a. M. She stays in the office until 6 p. M. And then returns home at 6:25 p. M. Which answer gives the correct distance and displacement at 6:25 p. M. ?. If v = 2i- and w = xi + 31, find all numbers * for which Iv + w= 5. If you would like to make $2483 in 8 years, how much would you have to deposit in an account that pays simple interest of 8%? I really need help and would also seriously benefit if you could explain formula for it as well Find the values of the trigonometric functions of t from the given information. tan(t) = -12/5 , sin(t) > 0 ,sin(t),cos(t),csc(t),sec(t),cot(t).Find the radius r of the circle if an arc of length 20 m on the circle subtends a central angle of 5/7 rad. (Round your answer to two decimal places.) Alex drew two lines and two transversals. He wants to know the measures of angles 1, 2, and 3. Identify the measure of each angle and the relationship used to find the angle measure. 2 vertical parallel lines, M and N, intersected by 2 transversal lines P and Q. Lines P and Q intersect each other on line N. Between lines M and N, the 2 angles formed by lines M and P are labeled 1 and one hundred thirty-five degrees, and the smaller angle formed by lines M and Q is labeled 3. The non-adjacent angles formed by lines P and Q are labeled 2 and ninety-five degrees.m1= because 1 and the angle measuring 135 are Choose... angles.m2= because 2 and the angle measuring 95 are Choose... angles.m3= because 1, 2, and 3 form a Choose.... A cla recorded the mae,in gram,of 20 bag of rice. Their reult are hown on the right. Explain how all three tudent could be correct? Stuck on this question CorrectThe perimeter of a square must be greater than 96 inches but less than 124 inches. Find the range of possible side lengths that satisfy these conditions. (Hint: Theperimeter of a square is given by P= 4s, where a represents the length of a side).Express your answer in interval notation. Use decimal form for numerical values. Sunlight exposure has stronger effect on skin cancer risk in fair-skinned humans than in individuals with darker skin. 3. Who is the author talking about when he refers to the country "which would be glad to eat up our whole nation without" preservatives? What is the author really saying? prepare the period-end adjusting journal entries needed for price company to comply with the revenue recognition standard. prices fiscal year-end is december 31. What is the formula for the arc length of the sector of a circle? What is the maximum number of outgoing flows a merge can have?A. OneB. TwoC. NoneD. Unlimited