helpp me pls anyone for branleist

The sound will be 9 times weaker at the new distance compared to the initial distance.

When you increase your distance from a sound source that is radiating equally in all directions, the intensity of the sound decreases. The relationship between distance and sound intensity follows the inverse square law.

According to the inverse square law, the intensity of sound is inversely proportional to the square of the distance from the source. Mathematically, it can be expressed as:

I ∝ 1/d^2

where I represents the sound intensity, and d represents the distance from the sound source.

If you increase your distance by a factor of 3, it means that the distance (d) becomes three times larger. Plugging this value into the inverse square law equation, we get:

I ∝ 1/(3d)^2

I ∝ 1/9d^2

This indicates that the intensity of the sound will decrease by a factor of 9 when the distance is increased by a factor of 3. In other words, the sound will be 9 times weaker at the new distance compared to the initial distance.

To learn more about intensity, refer below:

https://brainly.com/question/17583145

#SPJ11

The attractive force when the distance separating them is 160% of the initial separation is approximately 25.6 micronewtons.

We can use Coulomb's Law to determine the new attractive force.

Coulomb's Law states that the force (F) between two charges is proportional to the product of their charges (q1 and q2) and inversely proportional to the square of the distance (r) between them:

F = k * (q1 * q2) / r²

When the distance between the charges increases to 160% of the initial separation, the new distance r' is 1.6r. To find the new attractive force F':

F' = k * (q1 * q2) / (1.6r)²

Since the initial force (F) and the new force (F') share the same constant (k) and charges (q1 and q2), we can set up a proportion:

F / F' = r² / (1.6r)²

Given that the initial force F = 10 micronewtons, we can solve for the new force F':

10 / F' = 1 / (1.6²)
F' = 10 * (1.6²)

F' ≈ 25.6 micronewtons

The new attractive force between the charges when the distance separating them is 160% of the initial separation is approximately 25.6 micronewtons.

Learn more about Coulomb's Law here: https://brainly.com/question/26892767

#SPJ11

There are still limitations and Uncertainties in the measurements, particularly for smaller or more distant exoplanets. Ongoing research and technological advancements continue to improve our ability to characterize exoplanetary properties.

With current detection methods, we can measure several properties of planets outside our solar system (exoplanets). These properties include:

Mass: Exoplanet mass can be determined through radial velocity measurements. As a planet orbits its host star, its gravitational pull causes the star to move slightly. By measuring the star's radial velocity changes, we can estimate the mass of the planet.

Size and Radius: The size or radius of an exoplanet can be measured using the transit method. When a planet passes in front of its host star, it causes a slight decrease in the star's brightness. By analyzing these periodic brightness dips, we can determine the size and radius of the planet.

Orbital Period: The orbital period of an exoplanet is the time it takes to complete one orbit around its host star. By observing the periodic changes in a star's brightness or radial velocity, we can determine the orbital period of the planet.

Orbital Eccentricity: Eccentricity refers to the deviation from a perfectly circular orbit. Changes in the radial velocity or transit duration can provide insights into the eccentricity of an exoplanet's orbit.

Atmosphere Composition: Spectroscopic analysis can be used to detect the presence of certain gases or elements in the atmosphere of an exoplanet. By studying the absorption or emission lines in the star's light passing through the planet's atmosphere, we can infer its composition.

Astrometric methods primarily focus on measuring the position and motion of stars. However, they can also provide some information about exoplanets, including:

Planet Mass: By observing the wobbling motion of a star due to the gravitational pull of an orbiting planet, astrometry can help estimate the planet's mass.

Orbital Inclination: Astrometry can measure the angle at which an exoplanet's orbit is inclined relative to our line of sight. This information can aid in understanding the orientation and dynamics of the planetary system.

It's worth noting that while current detection methods have advanced significantly, there are still limitations and uncertainties in the measurements, particularly for smaller or more distant exoplanets. Ongoing research and technological advancements continue to improve our ability to characterize exoplanetary properties.

To know more about Uncertainties .

https://brainly.com/question/29387346

#SPJ11

The angle between the applied force and the displacement that object undergoes due to that force should be zero to give us the maximum value of work done on the object.

The angle between the applied force and the displacement of an object plays an important role in determining the work done on the object. When the angle between the two is zero, the force is applied in the same direction as the displacement and the maximum work is done on the object. This occurs because the force is directly contributing to the displacement of the object, resulting in maximum energy transfer.
However, when the angle is 90 degrees, the force is applied perpendicular to the displacement and no work is done on the object. This occurs because the force is not contributing to the displacement of the object, but rather causing it to change direction instead.
Therefore, This is an important concept in physics and is used in various fields, including engineering and mechanics.

learn more about applied force refer: https://brainly.com/question/14688267

#SPJ11

None of the above answer choices are correct. The total kinetic energy just before the collision is 25J.

We can use conservation of momentum and conservation of energy to solve this problem.

Let m be the mass of each particle, v1 be the velocity of the slower particle, and v2 be the velocity of the faster particle. We know that:

mv1 + mv2 = 0 (conservation of momentum)

and

(1/2)mv1^2 + (1/2)mv2^2 = 25 J + 100 J = 125 J (conservation of energy)

Simplifying the momentum equation, we get:

v2 = -2*v1

Substituting this into the energy equation and simplifying, we get:

5*v1^2 = 125 J

v1^2 = 25 J

v1 = ±5 m/s

Since the particles are moving towards each other, their relative velocity is the sum of their velocities, which is:

v_rel = v1 + v2 = v1 - 2*v1 = -v1

Therefore, the speed of the particles just before they collide is:

|v_rel| = |v1| = 5 m/s

The total kinetic energy just before the collision is:

(1/2)mv1^2 + (1/2)mv2^2 = (1/2)mv1^2 + (1/2)m(-2v1)^2 = 5/2m*v1^2 = 25J.

Therefore, the answer is 25J.

To learn more about energy, refer below:

https://brainly.com/question/1932868

#SPJ11

In both cases, the transients are exponential in nature, and their time constants are determined by the component values in the circuit.

In a first-order electrical circuit containing Resistor-Capacitor (RC) or Resistor-Inductor (RL) components, the transients will be exponential.

For an RC circuit, the transient response can be described as the charging or discharging of the capacitor. When charging, the voltage across the capacitor increases exponentially from 0V to its final steady-state value, while during discharging, the voltage decreases exponentially from its initial value to 0V. The time constant for an RC circuit is given by τ = RC, where R is the resistance, and C is the capacitance.

For an RL circuit, the transient response is observed in the current flowing through the inductor. When an RL circuit is connected to a voltage source, the current through the inductor increases exponentially from 0A to its final steady-state value. When the voltage source is disconnected, the current decreases exponentially from its initial value to 0A. The time constant for an RL circuit is given by τ = L/R, where L is the inductance, and R is the resistance.

In both cases, the transients are exponential in nature, and their time constants are determined by the component values in the circuit.

To know more about Resistor-Capacitor :

https://brainly.com/question/15889900

#SPJ11

The magnetic field strength created at the center of the motor is 0.4306T.

To find the magnetic field strength created at the center of a circular loop, we can use the formula for the magnetic field strength of a current-carrying loop:

B = (μ₀ × I × N) / (2 × R)

where B is the magnetic field strength, μ₀ is the permeability of free space (4π × 10^(-7) Tm/A), I is the current (29.6 A), N is the number of turns (270), and R is the radius of the loop (0.098 m, since 9.8 cm = 0.098 m).

Now, let's plug in the values:

B = (4π × 10^(-7) Tm/A × 29.6 A × 270) / (2 × 0.098 m)

B = (3.711 × 10^(-6) T × 29.6 A × 270) / (0.196 m)

B = (3.0997 × 10^(-4) T × 270) / (0.196 m)

B = 0.084369 T / 0.196 m

B ≈ 0.4306 T

Therefore, the magnetic field strength created at the center of the loop is approximately 0.4306 T (Tesla).

To know more about magnetic, visit:

https://brainly.com/question/3160109

#SPJ11

182 bright fringes appear along the total length of the plates.

To determine the number of bright fringes appearing along the total length of the glass plates with a light of wavelength 549 nm, you need to follow these steps:

1. Calculate the total separation between the two glass plates at the end with the wire.
2. Find the difference in path length for each fringe.
3. Divide the total separation by the path length difference to find the number of fringes.

Step 1: Calculate the total separation between the two glass plates.
Total separation = radius of wire × 2 = 0.025 mm × 2 = 0.05 mm = 0.05 × 10⁻³m

Step 2: Find the difference in path length for each fringe.
Wavelength = 549 nm = 549 × 10⁻⁹ m
Since it is a single-slit interference pattern, the difference in path length for each fringe = wavelength / 2
Path length difference = 549 × 10⁻⁹ m / 2 = 274.5 × 10⁻⁹ m

Step 3: Divide the total separation by the path length difference to find the number of fringes.
Number of fringes = total separation / path length difference
Number of fringes = (0.05 × 10⁻³ m) / (274.5 × 10⁻⁹ m) ≈ 182

Therefore, approximately 182 bright fringes appear along the total length of the plates.

To know more about single-slit interference :

https://brainly.com/question/15694132

#SPJ11

The ratio of kinetic energy to momentum of a 3500 kg car traveling at 40 m/s is 20 J·s/m.

The kinetic energy (KE) of an object is given by the formula,

KE = 1/2mv², mass of the object is m and its velocity is v

The momentum (p) of an object is given by the formula,

p = mv

So, for a 3500 kg car traveling at 40 m/s, we have,

KE = 1/2 x 3500 kg(40 m/s)²

KE = 2,800,000 J

p = 3500 kg x 40 m/s

p = 140,000 kg·m/s

The ratio of kinetic energy to momentum is simply KE/p, which gives,

KE/p = 2,800,000 J / 140,000 kg·m/s

KE/p = 20 J·s/m

Therefore, the ratio of kinetic energy to momentum of the car is 20 J·s/m.

To know more about kinetic energy and momentum, visit,

https://brainly.com/question/29200829

#SPJ1

Answer:We can use trigonometry to find the vertical component of the initial velocity of the ball. The vertical component of the initial velocity is given by:

vertical component = initial velocity x sin(angle)

Plugging in the values given in the problem, we get:

vertical component = 25 m/s x sin(53 degrees)

vertical component = 25 m/s x 0.800

vertical component = 20 m/s

Therefore, the vertical component of the initial velocity of the ball is 20 m/s.

Explanation:

The screen is located approximately 271.1 cm away from the slit.

[tex]y_n[/tex] = (nλL) / w

Solving for L, we get:

L = ([tex]y_n[/tex] * w) / (n * λ)

Substituting the values given, we get:

L = (8.99 cm * 0.111 cm) / (15 * 675 nm)

L ≈ 271.1 cm

A screen refers to a flat, usually rectangular surface that displays visual information. Screens are commonly used in a wide range of electronic devices, such as televisions, computers, smartphones, tablets, and even wearable devices like smartwatches. Screens have become an integral part of modern life, used for everything from entertainment and communication to work and education.

Screens can be made from a variety of materials, such as glass, plastic, or metal, and can use different display technologies, such as LCD (Liquid Crystal Display), OLED (Organic Light Emitting Diode), or LED (Light Emitting Diode). The resolution of a screen refers to the number of pixels it can display, with higher resolutions allowing for more detailed and sharper images.

To learn more about Screen visit here:

brainly.com/question/23902291

#SPJ4

The force of attraction will be F/4.

According to Coulomb's law, the force of attraction between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. Thus, if the charges of both particles are doubled, the force of attraction will become 4F. Similarly, if the distance between them is doubled, the force of attraction will become 1/4 of the original force, i.e., F/4.

Therefore, if the charges of both particles are doubled and the distance between them is also doubled, the force of attraction will be F/4.

To know more about Coulomb's law, visit:

https://brainly.com/question/506926

#SPJ11

The total energy density of an electromagnetic wave is given by the equation:

u = ε0 E^2 / 2 + B^2 / (2μ0)

where u is the energy density, ε0 is the electric constant (permittivity of free space), E is the electric field strength, B is the magnetic field strength, and μ0 is the magnetic constant (permeability of free space).

If the value of the electric field in an electromagnetic wave were doubled, then the total energy density of the wave would increase by a factor of four. This is because the electric field strength term appears squared in the equation for energy density. Doubling the electric field strength would cause the energy density to increase by a factor of 2^2 = 4.To see this more clearly, we can rewrite the equation for energy density in terms of the electric field strength alone:

u = ε0 E^2 / 2 + (μ0/ε0) (E^2 / 2)

where the second term on the right-hand side represents the contribution to the energy density from the magnetic field strength (which is proportional to the electric field strength in an electromagnetic wave). If we double the electric field strength (E), then the energy density becomes:

u' = ε0 (2E)^2 / 2 + (μ0/ε0) [(2E)^2 / 2]

Simplifying this expression, we get:

u' = 4ε0 E^2 / 2 + (μ0/ε0) (4E^2 / 2)

u' = 2ε0 E^2 + 2μ0 E^2

u' = 2(E^2 / ε0)

This expression shows that doubling the electric field strength causes the energy density to increase by a factor of 2^2 = 4, as claimed above.

to know more about Electromagnetic wave please visit

https://brainly.com/question/31802774

#SPJ11

Using the given information, we can calculate the total energy stored in the electric field of the parallel-plate capacitor.

The capacitor has a diameter of 2.60 cm (0.026 m) and a spacing of 0.400 mm (0.0004 m). It is charged to 300 V. First, we need to find the capacitance (C) using the formula C = ε₀ * A / d, where ε₀ is the vacuum permittivity (8.85 × 10⁻¹² F/m), A is the area of the plates, and d is the spacing between the plates.

The area A = π * (diameter / 2)² = π * (0.026 / 2)² = 5.31 × 10⁻⁴ m².

Now, we can find the capacitance: C = (8.85 × 10⁻¹² F/m) * (5.31 × 10⁻⁴ m²) / (0.0004 m) = 1.17 × 10⁻¹¹ F.

Next, we'll find the energy stored (U) using the formula U = 0.5 * C * V², where V is the voltage.

U = 0.5 * (1.17 × 10⁻¹¹ F) * (300 V)² = 5.27 × 10⁻⁶ J.

So, the total energy stored in the electric field of the parallel-plate capacitor is 5.27 × 10⁻⁶ J (joules).

To learn more about energy visit;

https://brainly.com/question/24284560

#SPJ11

the thermal efficiency of this process is approximately 2.8%.

To determine the thermal efficiency, we need to know the amount of heat energy produced by burning one gallon of gasoline and the amount of work done by that energy to pull the load 10 miles.

Assuming that the heat of combustion of gasoline is 114,000 BTU (British Thermal Units) per gallon, we can convert this to joules:

114,000 BTU/gallon * 1055 J/BTU = 120,270,000 J/gallon

The work done to pull the load 10 miles is:

work = force * distance = 500 pounds * 10 miles = 2,500,000 foot-pounds

We can convert this to joules:

2,500,000 foot-pounds * 1.3558 J/foot-pound = 3,389,500 J

The thermal efficiency is the ratio of the work done to the amount of heat energy produced:

efficiency = work / energy = 3,389,500 J / 120,270,000 J/gallon = 0.028 or 2.8%

What if thermal efficiency?

Thermal efficiency is a measure of how well a system converts heat energy into useful work.

To know more about the efficiency visit:

brainly.com/question/13039990

#SPJ11

To solve this problem, we can use the formula:

observed frequency = emitted frequency x (speed of sound + observer's velocity) / (speed of sound - source's velocity)

We know the emitted frequency (192 Hz), the observed frequency (207 Hz), and the speed of sound (335 m/s). We want to find the velocity of the train (source's velocity).

Plugging in the values we know, we get:

207 Hz = 192 Hz x (335 m/s + observer's velocity) / (335 m/s - source's velocity)

Simplifying, we can cross-multiply and rearrange:

207 Hz x (335 m/s - source's velocity) = 192 Hz x (335 m/s + observer's velocity)

Multiplying out the terms, we get:

69585 Hz*m/s - 207 Hz*source's velocity = 64320 Hz*m/s + 192 Hz*observer's velocity

Solving for the source's velocity, we get:

source's velocity = (69585 Hz*m/s - 64320 Hz*m/s + 192 Hz*observer's velocity) / 207 Hz

Plugging in the values we know, we get:

source's velocity = (69585 - 64320 + 192 x 0) / 207

source's velocity = 130 m/s

Learn more about frequency here:

https://brainly.com/question/5102661

#SPJ11

The rest energy of a 19.9 g piece of chocolate is approximately 1.791 terajoules.

To find the rest energy of a 19.9 g piece of chocolate, you'll need to use the equation E=mc^2, where E is the energy, m is the mass, and c is the speed of light.

Convert mass to kilograms (1 g = 0.001 kg)
19.9 g * 0.001 kg/g = 0.0199 kg

Find the speed of light (c) in m/s:
c = 3 x 10^8 m/s

Calculate the rest energy (E):
E = (0.0199 kg) * (3 x 10^8 m/s)^2

Simplify and convert the energy to terajoules (1 TJ = 10^12 J):
E = 1.791 x 10^15 J
E = 1.791 x 10^15 J / 10^12 J/TJ
E = 1.791 TJ

Thus, the rest energy is approximately 1.791 terajoules.

Learn more about "energy": https://brainly.com/question/13881533

#SPJ11

Conventional plug fuses have a base referred to as an Edison base. This base is of the same shape as the base on a light bulb.

The Edison base is a standard design used for electrical sockets and plugs for various applications, including fuses and light bulbs. It is named after the inventor Thomas Edison, who popularized the use of this base in his electrical lighting systems.

The Edison base is a widely recognized and commonly used type of base for electrical sockets and plugs in many countries. It is named after Thomas Edison, the renowned American inventor who played a significant role in the development of electrical systems and lighting.

The Edison base has a distinctive shape that closely resembles the base of a standard light bulb. It is characterized by a threaded metal socket with a screw-type design.

The base typically has a center contact point and a threaded outer ring. This design allows for a secure and reliable connection between the electrical device and the socket.

Conventional plug fuses, which are used for overcurrent protection in electrical circuits, often utilize the Edison base. The fuse itself consists of a fuse element enclosed in a protective housing with the Edison base at its bottom.

When a fault or excessive current occurs, the fuse element will melt or blow, interrupting the circuit and protecting the electrical system from damage.

To learn more about inventor, refer below:

https://brainly.com/question/30765233

#SPJ11

Answer:

During systole, there is ventricular contraction which is when blood is expulsed with high pressure in the aorta. This means that the velocity of the blood flow is also high. During diastole, there is refilling of the blood following systole. Therefore, the pressure is maintained by recoil and is overall lower.

As blood exits the heart, it is ejected with high pressure and velocity due to the strong contraction of the heart muscles. However, as it progresses through the circulatory system, the blood velocity and pressure decrease gradually.

This is because the circulatory system comprises a network of blood vessels, including arteries, capillaries, and veins, each with different diameters and functions. As blood moves from the arteries to the capillaries, the diameter of the blood vessels decreases, leading to an increase in resistance to blood flow. This results in a decrease in blood velocity.

Moreover, the capillaries have very narrow diameters, and blood cells must pass through them one at a time. This causes a further decrease in blood velocity, allowing sufficient time for the exchange of gases, nutrients, and waste products between the blood and the surrounding tissues.

As the blood exits the capillaries and enters the veins, the diameter of the blood vessels increases, and the resistance to blood flow decreases. This leads to a gradual increase in blood velocity. However, the pressure in the veins remains low, and the blood flow is facilitated by the contraction of surrounding muscles and the one-way valves in the veins.

The circulatory system is designed to regulate blood velocity and pressure to ensure the efficient transport of oxygen and nutrients to the body's tissues while maintaining a constant blood supply to the vital organs.

Know more about circulatory system here:

https://brainly.com/question/29259710

#SPJ11

A satellite imaging system that beams energy at a surface and then records the energy that is reflected is classified as an active remote sensing system.

This is because the satellite actively emits energy towards the surface and then receives the reflected energy. Active remote sensing is useful for obtaining information about the surface of the Earth, including its topography, vegetation cover, and other features. By using different wavelengths of energy, such as infrared or microwave, active remote sensing can also be used to determine information about soil moisture, temperature, and other environmental variables. Overall, active remote sensing is a valuable tool for gathering information about the Earth's surface and can be used for a wide range of applications, including environmental monitoring, disaster response, and natural resource management.

Learn more about satellite here:

https://brainly.com/question/9266911

#SPJ11

The correct answer is D. Most black holes are detected by observing the orbits of stars around them and by the X-rays produced by the surrounding accretion disk. The accretion disk is a disk of gas and dust that spirals into the black hole, heating up and emitting X-rays as it does so.

By detecting these X-rays, astronomers can identify the presence of a black hole and study its properties. Most black holes are found D. Both A and C: watching orbits of stars and detection of X-rays from accretion disks.

Black holes are detected by observing the gravitational influence they have on nearby stars (A) and by the X-rays produced by their surrounding accretion disks (C). The accretion disk is formed from the matter that spirals toward the black hole, and as this matter heats up, it emits X-rays that can be detected by telescopes.

Learn more about X-rays here: brainly.com/question/23281551

#SPJ11

The relative velocity of the two spaceships is -0.696c, or about 69.6% of the speed of light, indicating that they are moving away from each other.

To find the relative velocity of the two spaceships, we can use the relative velocity equation:

[tex]v_rel = (v_2 - v_1) / (1 - (v_1*v_2/c^2))[/tex]

where v_1 and v_2 are the velocities of the missile as measured by the first and second spaceship respectively, and c is the speed of light.

In this case, the missile is moving at 0.950c relative to the first spaceship and at 0.750c relative to the second spaceship. Using these values, we can plug them into the equation to find the relative velocity:

v_rel = (0.750c - 0.950c) / (1 - (0.750c * 0.950c/c^2))

v_rel = (-0.200c) / (1 - 0.7125)

v_rel = (-0.200c) / 0.2875

v_rel = -0.696c

Therefore, the relative velocity of the two spaceships is -0.696c, or about 69.6% of the speed of light, indicating that they are moving away from each other.

Learn more about velocity

https://brainly.com/question/17127206

#SPJ4

The bike travels 11,304 cm (or 113.04 meters) in 17 seconds.

The angular acceleration is constant, so we can use the equation:

θ = 1/2 α t²+ [tex]w_i[/tex] t

In 17 seconds, the wheels have made 60 revolutions or 60 * 2π radians of rotation. Therefore, θ = 60 * 2π.

We know the radius of the wheel is 30 cm, so the distance traveled by the bike is equal to the arc length of the circle traced by the wheel. The arc length is given by:

s = rθ

where r is the radius of the wheel and θ is the angle of rotation in radians.

Substituting our values, we get:

s = (30 cm) * (60 * 2π) = 11,304 cm

Distance is a crucial parameter in the study of motion, energy, and forces. It plays a key role in the formulation of laws such as Newton's laws of motion and the law of gravitation. Distance is also used to describe the size and position of objects in space, from subatomic particles to galaxies.

In everyday life, distance is a ubiquitous concept that we use to navigate and communicate. It helps us to determine how far we need to travel to reach a destination, estimate the time it takes to get there and understand the size and layout of our environment. Distance also affects our social interactions, as it can influence the level of intimacy or separation between people.

To learn more about Distance visit here:

brainly.com/question/26711747

#SPJ4

It takes 2.5 seconds for the car to come to a complete stop when you slam on the brakes with a constant acceleration of 4 m/s².

To determine the time it takes for the car to stop when you slam on the brakes, we can use the equation of motion:

v = u + at,

where:

v is the final velocity (which is 0 m/s when the car comes to a stop),

u is the initial velocity (10 m/s),

a is the acceleration (-4 m/s², as it is in the opposite direction to the motion of the car),

t is the time taken to stop.

Plugging in the values, the equation becomes:

0 = 10 m/s + (-4 m/s²) * t.

Rearranging the equation to solve for t:

4 m/s² * t = 10 m/s,

t = 10 m/s / 4 m/s²,

t = 2.5 s.

Therefore, it takes 2.5 seconds for the car to come to a complete stop when you slam on the brakes with a constant acceleration of 4 m/s².

To learn more about motion, refer below:

https://brainly.com/question/22810476

#SPJ11

The number of revolutions in 10 seconds is equal to the angular velocity multiplied by the time. We are not given the angular velocity of the rear sprocket or any other information about the bike's speed, so we cannot calculate the distance it will travel in 10 seconds.

To calculate how far a bike with a rear wheel radius of 34 cm will travel in 10 seconds, we need to first find the distance that the wheel covers in one revolution.

The distance covered by one revolution of a wheel is equal to its circumference, which can be calculated using the formula:

C = 2πr

Where C is the circumference, π is the mathematical constant pi, and r is the radius of the wheel.Substituting the given value of the radius of the rear wheel, we get:

C = 2π × 0.34 m = 2.13 m

Therefore, the rear wheel of the bike covers a distance of 2.13 m in one revolution.

If the bike continues to rotate forward along with the rear sprocket, it will cover a distance equal to the circumference of the wheel in one revolution for every revolution of the rear sprocket.

Assuming a constant rate of rotation, the bike will cover a distance equal to the product of the distance covered in one revolution and the number of revolutions in 10 seconds.

For such more questions on Angular velocity:

https://brainly.com/question/29342095

#SPJ11

Assuming the constant velocity of money, a 2 percent increase in the money supply will result in a 2 percent increase in nominal GDP in the short run, according to the quantity theory of money.

The equation for the quantity theory of money is MV = PY, where M is the money supply, V is the velocity of money, P is the price level, and Y is real GDP. Assuming V is constant, a 2 percent increase in M would lead to a 2 percent increase in PY, which would be reflected in nominal GDP.

It's important to note that this relationship only holds in the short run, as the velocity of money may change over time due to changes in consumer and business behavior. Additionally, in the long run, changes in the money supply may lead to changes in the price level rather than changes in real output

Learn more about velocity

https://brainly.com/question/17127206

#SPJ4

The answer is "mechanical wave." A mechanical wave is a longitudinal wave that requires a medium, such as a solid, liquid, or gas, to propagate energy. This type of wave is characterized by the displacement of particles in the medium parallel to the direction of wave propagation.

The wave travels through the medium, it transfers energy from one particle to the next, creating a chain reaction that propagates the wave forward. Mechanical waves are different from electromagnetic waves, which can travel through a vacuum because they do not require a medium to propagate energy. Electromagnetic waves are transverse waves that oscillate perpendicular to the direction of propagation and can travel through space without a medium. In summary, a longitudinal wave that carries energy through mediums but cannot carry energy through a vacuum is known as a mechanical wave. This type of wave requires a medium to propagate energy and is characterized by the displacement of particles in the medium parallel to the direction of wave propagation.

learn more about Mechanical waves here.

https://brainly.com/question/13550683

#SPJ11

An air-track glider attached to a spring oscillates between the 15.0 cm mark and the 61.0 cm mark on the track. The glider completes 10.0 oscillations in 37.0 s. We have to find the period of the oscillations.

First we have to determine the total time taken for the oscillations and then divide the total time by the number of oscillations. The glider completes 10.0 oscillations in 37.0 seconds:

Period (T) = Total time (t) / Number of oscillations (n)
T = 37.0 s / 10.0 oscillations
=>T = 3.7 s

Therefore, the period of the oscillations for the air-track glider attached to a spring is 3.7 seconds.

Learn more about period at: https://brainly.com/question/24255969

#SPJ11

When an electric field is applied to a shallow bath of vegetable oil, tiny bits of thread floating in the oil align with the field similar to compasses in a magnetic field. This occurs because the electric field induces polarization in the thread particles, causing them to develop positive and negative ends.

These charged ends align with the direction of the electric field, just as compass needles align with the magnetic field due to the interaction between their magnetic poles and the external magnetic field. When an electric field is applied to a shallow bath of vegetable oil, the electric field creates a force on the electrically charged particles in the oil. This force causes the particles to move and create a flow of oil. As the flow of the oil moves, it drags the tiny bits of thread along with it. The movement of the thread aligns with the electric field, similar to how compasses align with a magnetic field. This is because electric fields and magnetic fields are both types of fields that exert a force on particles, causing them to move or align in a particular direction. So, the tiny bits of thread in the oil align with the electric field just like compasses align with a magnetic field.

Learn more about the electric field here: brainly.com/question/15800304

#SPJ11

The central maximum is along the central axis of the slit and does not subtend any angle as measured from the slit.

sin θ = (mλ) / w

Plugging in the values, we get:

sin θ = (0 × 5.00 × [tex]10^{-7[/tex] m) / 3.00 × [tex]10^{-5[/tex] m

sin θ = 0

A slit is a narrow opening or gap in a surface or material. Slits can be found in a variety of contexts, from the narrow opening in a mail slot to the aperture in a camera lens. In optics, a slit is commonly used as a component of a device known as a slit-lamp, which is used to examine the eyes of patients. A narrow beam of light is shone through the slit, which can be adjusted to control the size of the beam, and the resulting image is viewed through a microscope.

In physics, slits are also important in the study of wave phenomena such as diffraction and interference. A double-slit experiment, for example, involves shining a light through two parallel slits and observing the resulting pattern of light and dark fringes on a screen. This experiment provides evidence of the wave-like nature of light and other particles.

To learn more about Slit visit here:

brainly.com/question/31516674

#SPJ4