Answer:
The high melting point is also consistent with its description as an ionic solid. In the crystal, each S2− ion is surrounded by an octahedron of six Ca2+ ions, and complementarity, each Ca2+ ion surrounded by six S2− ions.
Explanation:
You can use the periodic table to predict whether an atom will form an anion or a cation, and you can often predict the charge of the resulting ion. Atoms of many main-group metals lose enough electrons to leave them with the same number of electrons as an atom of the preceding noble gas. To illustrate, an atom of an alkali metal (group 1) loses one electron and forms a cation with a 1+ charge; an alkaline earth metal (group 2) loses two electrons and forms a cation with a 2+ charge, and so on. For example, a neutral calcium atom, with 20 protons and 20 electrons, readily loses two electrons. This results in a cation with 20 protons, 18 electrons, and a 2+ charge. It has the same number of electrons as atoms of the preceding noble gas, argon, and is symbolized Ca2+. The name of a metal ion is the same as the name of the metal atom from which it forms, so Ca2+ is called a calcium ion.
When atoms of nonmetal elements form ions, they generally gain enough electrons to give them the same number of electrons as an atom of the next noble gas in the periodic table. Atoms of group 17 gain one electron and form anions with a 1− charge; atoms of group 16 gain two electrons and form ions with a 2− charge, and so on. For example, the neutral bromine atom, with 35 protons and 35 electrons, can gain one electron to provide it with 36 electrons. This results in an anion with 35 protons, 36 electrons, and a 1− charge. It has the same number of electrons as atoms of the next noble gas, krypton, and is symbolized Br−. (A discussion of the theory supporting the favored status of noble gas electron numbers reflected in these predictive rules for ion formation is provided in a later chapter of this text.)
What is the density of an object that has a mass of 149. 8 g and displaces 12. 1 ml of water when placed in a graduated cylinder?.
Answer:
12.38 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]d = \frac{m}{v} \\ [/tex]
m is the mass
v is the volume
From the question
m = 149.8 g
v = 12.1 mL
We have
[tex]d = \frac{149.8}{12.1} = 12.380165... \\ [/tex]
We have the final answer as
12.38 g/mLHope this helps you
Unlike solids and liquids, gases can be compressed. How is this physical characteristic of gases beneficial to society?
Chemical properties of water for class 8
Answer:
pH value is 7neither acidic nor basecan be found in all 3 state (ie. liquid, solid and gas {vapour})it's excellent solventFind the number of CO2 molecules present in 20l of CO2 at 0°C and 772mm of Hg.
I wiLL mark you as brainliest and give 50 points.
Answer:
18
At STP, 22.4 liters of a gas forms one mole that is 6.023×10
23
molecules.
Volume of CO
2
in 1 litre of air =
100
0.03
×1 L
∴ No. of molecules of CO
2
=
22.4
6.023×10
23
×
100
0.03
=8.066×10
18
Explanation:
I guess it's this
[tex]\\ \sf\longmapsto PV=nRT[/tex]
[tex]\\ \sf\longmapsto n=\dfrac{PV}{RT}[/tex]
[tex]\\ \sf\longmapsto n=\dfrac{772(20)}{8.314(273)}[/tex]
[tex]\\ \sf\longmapsto n=\dfrac{15440}{2269.722}[/tex]
[tex]\\ \sf\longmapsto n=6.8mol[/tex]
what is the best way to study and understand electron configuration??
Answer:
You have to remember this memory aid, diagonals and all.
You have to keep a tight tally of the electrons you’ve used so far so you don’t go over the number of electrons in the element you’re working on.
You have to remember how many electrons fit into each subshell (s, p, d, f).
It takes a lot of time, especially when the element has more than 20 electrons.
Explanation:
Q.2. Which of the following statements is true of second ionization energies?
a) That of Al is higher than that of Mg because Mg wants to lose the second electron, so it is easier to take the second electron away
b) That of Al is higher than that of Mg because the electrons are taken from the same energy level, but the Al atom has one more proton
c) That of Al is lower than that of Mg because Mg wants to lose the second electron, so the energy change is greater
d) That of Al is lower than that of Mg because the second electron taken from Al is in a p orbital, so it is easier to remove it.
Answer:
a) That of Al is higher than that of Mg because Mg wants to lose the second electron, so it is easier to take the second electron away
Statement which is true regarding second ionization energy is that ionization energy of of Al is higher than that of Mg because Mg wants to lose the second electron, so it is easier to take the second electron away.
What is ionization energy?Ionization energy is defined as the minimum amount of energy required to remove an electron which is loosely held in the outermost shell to form an isolated gaseous atom,ion or molecule.
It has a positive value for neutral atoms indicating that the ionization process is an endothermic process . The closer the outermost shell electrons are to the nucleus of an atom higher is it's ionization energy.It is expressed in electron volts or joules.
Ionization energy increases across period as more energy is required to remove electron from an atom as it is closely held along a period while it is decreasing down the group as on going the group the inter-nuclear distance increases and as a result less energy is required to remove an electron.
Learn more about ionization energy,here:
https://brainly.com/question/28385102
#SPJ6
What is the frequency of yellow light, which has a wavelength of 5.56 x 10^-7 m?
O A) 5.40 x 10^14 m/s
O B) 5.40 x 10^14 Hz
O C) 1.85 x 10^15 m/s
O D) 1.85 x 10^15 Hz
The frequency of yellow light, which has a wavelength of 5.56 x 10^-7 m is 5.40 x 10^14 Hz. Therefore, option B is correct.
What do you mean by wavelength ?The distance between identical points (adjacent crests) in adjacent cycles of a waveform signal propagated in space or along a wire is defined as the wavelength. This length is typically specified in wireless systems in meters (m), centimeters (cm), or millimeters (mm) (mm).
The wavelength is the distance between two wave crests, and it is also the distance between two wave troughs. The frequency is measured in cycles per second (Hz) and is the number of vibrations that pass over a given spot in one second (Hertz).
Speed is distance over time, Therefore, v = λ / T.
The frequency, f, is 1/T, so the equation relating wave speed, frequency, and wavelength is v = c / λ .
Given :
Wavelength = 5.56 x 10^-7 m
Frequency = ?
Speed (c) = 3 × 10⁸m/s
v = c / λ
By substituting given values in equation and we get,
v = 3 × 10⁸ / 5.56 x 10^-7
= 5.40 x 10^14
The frequency of yellow light is 5.40 x 10^14.
Thus, option B is correct.
To learn more about the wavelength, follow the link;
https://brainly.com/question/13533093
#SPJ6
Count the atoms in 717 grams of Nitrogen.
Answer:
3.08x10^25
Explanation:
Divide the mass in grams by the molar mass of nitrogen (14.0067), then multiply the result by Avogadro's number (6.022x10^23). Then round to the correct amount of significant figures.
What is the wave length of an electromagnetic radiation ,having a frequency of 5.2 x 10^12 Hz? Note: c= 3.00 x 10^8 m/s
Answer:
[tex] \huge{5.77 \times {10}^{ - 5} m}[/tex]
Explanation:
The wavelength of a wave can be found by using the formula
[tex]\lambda = \frac{c}{f} \\[/tex]
where
c is the speed of the wave
f is the frequency
From the question we have
[tex] \lambda = \frac{3 \times {10}^{8} }{5.2 \times {10}^{ 12} } \\ \\ \\ \\ \large{ = 5.77 \times {10}^{ - 5} m}[/tex]
Hope this helps you
T or F: Lone pairs around the oxygen atom of a water molecule play no role in determining its molecular geometry?
Answer:
Explanation:
They play a very important part. The geometry is not a straight line. It is an angle over 90 which means that the molecule has the same general shape as a boomerang. The two hydrogens and the 2 lone electron pairs try to get away as far as possible from each other. The actual shape results in a tetrahedron shape. But the two hydrogens and 1 oxygen actually look like the aforementioned boomerang.
Which ions are isoelectronic with ar?.
Answer:
Isoelectronic means same electronic configuration as Ar. These are such as sulfide ion (S2− ), chloride ion (Cl− ) and phosphide ion (P3− ).
Explanation:
Any atom or ion with 18 electrons is isoelectronic with Ar. Some examples are:
Ca2+S2-Cl-What are isoelectronic?Isoelectronic atoms or ions refer to those that possess an identical number of electrons consequently sharing the same electron configuration. The term "isoelectronic" derives from the Greek words "isos " signifying "equal " and "elektron " denoting "electron".
It is worth noting that isoelectronic atoms or ions may exhibit varying atomic numbers and charges; nonetheless, their electron count remains constant.
Learn about isoelectronic here https://brainly.com/question/30014620
#SPJ6
when the corporation issuing the bonds has the right to redeem the bonds prior to the maturity, the bonds are
Answer:
Callable or redeemable bonds
Explanation:
"..are bonds that can be redeemed or paid off by the issuer prior to the bonds' maturity date."
(only the rght letter and a explanation you don't really need the explanation ill give brainiest)
What happens when an electrically charged pencil is placed close to water running from a faucet?
A. The pencil attracts the water.
B. The pencil becomes positively charged.
C. The water attracts the pencil.
D. The water repels the pencil.
Answer:
Explanation:
Option c) The water attracts the pencil.
Pencils are though formed of wood that acts as a bad conductor of electricity, quite strangely pencils can be electrically charged.
Here pencils have non-metal carbons present in its graphite tip and this makes the pencils charged.
When this pencil is held near the water of the tap, the hydrogen ions get attracted and thereby the water gets attracted to the pencil.
Water, however, is an excellent conductor of electricity and therefore water and electricity are a dangerous combination.
PLS HELP! I’m marking brainliest as well
Four preparations involving table sugar (sucrose) are described below. Analyze the sugar preparation processes and the end products.
Sugar Water Sugar Floss Sugar Caramel Rock Sugar
Sugar is added to water, and the water is stirred until the sugar is no longer visible. Sugar is melted and blown with a fan to make thin threads of solid sugar. Pure sugar is melted and cooked until it changes color and becomes a thick, sticky liquid. A highly concentrated solution of sugar water is prepared, large sugar crystals are allowed to form slowly, and then dye is added.
Which of the following is evidence that a chemical reaction has taken place in one of the processes?
A.
the melting and re-solidification of sugar into threads, which are different from sugar’s natural cube-shaped crystals
B.
the slow growth of giant sugar crystals from a highly concentrated sugar-water solution and added dye
C.
the dissolution of solid sugar in water to form a thin, colorless, odorless liquid
D.
the color change that takes place after heat melts and begins to decompose the sugar
Answer:
b
Explanation:
Answer: d:the color change that takes place after heat melts and begins to decompose the sugar
Explanation:i did the study island
elements in the second group are also very reactive. they are called:
Answer:
Explanation:
IIA elements in the periodic table are the alkali earth metals
How many grams of acetic acid are present in 250g of vinegar that contains 5.00% acetic acid?
(Help me out )
When a single electron returns to the ground state from an excited state, it emits___
1. A continuous spectrum of all wavelengths of light
2. A line spectrum of 2 or more wavelength of light
3. A single, specific wavelength of light
4. No light
Answer:
3) A single specific wavelength
Explanation:
When an electron returns to ground state, it has to emit a single photon.
When a single electron returns to the ground state from an excited state, it emits a single, specific wavelength of light. Therefore, option 3 is correct.
What is wavelength ?The separation between any two points in a wave and those identical points in the following wave cycle. This can be null-to-null, crest-to-crest, trough-to-trough, etc.
A spectrum is the term used to describe the range of wavelengths or frequencies for wave phenomena. The term was originally used to describe the electromagnetic spectrum, but it is now used to describe the sound spectrum and vibration spectrum.
When electromagnetic radiation such as radio waves, light waves, or infrared waves travel across space, they leave behind distinctive patterns. Each wave has a distinct size and form. Wavelength is the separation between peaks.
Thus, option 3 is correct.
To learn more about wavelength, follow the link;
https://brainly.com/question/12924624
#SPJ2
asap help for brainlist
Which pair of atoms will form a covalent bond?
Question 7 options:
H and O
Li and I
K and Fl
Na and Cl
Answer:
h and o
Explanation:
because both are non metals
How can you classify matter?
Answer:
Matter can be broken down into two categories: pure substances and mixtures. Pure substances are further broken down into elements and compounds. Mixtures are physically combined structures that can be separated into their original components. A chemical substance is composed of one type of atom or molecule.
Hope this helps :)
Explain why some metals are extracted by heating their oxides with carbon, but some metals cannot be extracted in this way
Answer:
This happens because a metal is less reactive than carbon and it can be extracted from its oxides by heating with carbon. The carbon displaces metal from the compound and removes the oxygen from the oxide.
Valence electrons are electrons in the ? of an atom.
Answer:
Valence electrons are the outermost of electrons.
Explanation:
valence electrons are the outermost electrons of an atom located in the shell/ orbit
A yellow solid, W is soluble in water. Which method of separation can be used to obtain the solid W from an aqueous solution?
A Neutralisation
B Chromatography
С Distillation
D Crystallisation
methane is called an organic compound why
Answer:
Explanation:
1) Organic compounds always contain only p-block elements (Groups III-VII), at least one of which must be carbon. 2) Organic compounds almost always contain one or more C-H bonds. ... Thus, all bonds are typically covalent in organic compounds. Methane (CH4) is the prototypical organic molecule.
Methane contains carbon, forming covalent bonds, and is found in living organisms, making it an organic compound.
Methane (CH₄) is considered an organic compound due to its molecular structure and occurrence in living organisms. Organic compounds are primarily composed of carbon atoms covalently bonded to hydrogen and often other elements like oxygen, nitrogen, sulfur, and more.
Methane consists of one carbon atom bonded to four hydrogen atoms through covalent bonds. Carbon's unique ability to form stable covalent bonds with other elements, including itself, leads to the vast diversity of organic molecules found in living organisms.
Methane is a crucial component of natural gas and is produced by various biological and geological processes. It is present in the digestive systems of animals, formed during decomposition, and plays a role in carbon and energy cycles.
Its prevalence in living systems and its molecular structure classify methane as an organic compound, reflecting the foundational principles of organic chemistry.
To learn more about Organic compounds here
https://brainly.com/question/28682641
#SPJ3
The complete question is :
Methane is called an organic compound why?
why the mixture of bromine and ethane is discoloured when left in the sun
Answer:
In the presence of UV light, ethane will react with bromine in a substitution reaction. UV light is the condition under which the reaction will occur so it is written above the arrow in the chemical equation. As the reaction proceeds, the intensity of the re-brown colour of the bromine water decreases.
Answer:
here ya go
Explanation:
combining bromine and ethane leads to a brown gas or liquid which is made of the elements. it is a gas at room temperature and does not affect human beings. there are many uses for bromine compounds but they are mainly used for the manufacturing of chlorine, fire retadants, water purification, graphy chemicals and pharmaceutcals. it is a naturally occurring element that can be found in animals such as sharks since they produce their own.
What type of reaction is shown below? Check all that apply. 2Na Cl2 → 2NaCl synthesis decomposition combustion.
Answer:
Synthesis
Explanation:
Trust me on this :)
Short note of modern periodic table
Hi
In the modern periodic table, the elements are arranged in the order of their increasing atomic number. In the modern periodic table, there are seven horizontal rows called periods and eighteen vertical columns (1 to 18) called groups. The arrangement of the periods and groups results in formation of boxes.
Explanation:
If it's help pls give me Brainliest!!
How many atoms exist in 100.0 grams of lithium
Which of the following element has more than one valence number. A.gold,b.iron,c.silver,d.aluminum
Answer:
iron
iron has +2 valancy
Answer:
C silver
Explanation:
silver have high quantity load that passes through magnesium towards overload despised everything happens through magnetic century.The half-life of a radioactive substance is 15 days. After 10 days a sample of the substance has been reduced to a mass of 4 mg. A. What was the inital mass (in mg) of the sample? B. Using your answer from above, after how many days will there only be 0. 3 mg of substance left?.
A. The initial mass of the sample is 6.35
B. The time taken for 0.3 mg of the sample to remain is 66 days
A. Determination of the initial mass of the sample
We'll begin by calculating the number of half-lives that has elapsedHalf-life (t½) = 15 days
Time (t) = 10 days
Number of half-lives (n) =?n = t / t½
n = 10 / 15
n = ⅔Finally, we shall determine the initial mass of the sample.Number of half-lives (n) = ⅔
Amount remaining (N) = 4 mg
Initial amount (N₀) =?[tex]N_0 = N \times {2}^{n} \\ N_0 = 4 \times {2}^{2 \div 3} \\ N_0 = 6.35 \: mg[/tex]
Therefore, the initial mass of the sample is 6.35 mg
B. Determination of the time
We'll begin by calculating the number of half-lives that has elapsedAmount remaining (N) = 0.3 mg
Initial amount (N₀) = 6.35 mg
Number of half-lives (n) =?[tex]{2}^{n} = \frac{N_0}{N} \\ \\ {2}^{n} = \frac{6.35}{0.3} \\ \\ {2}^{n} = 21.167 \\ take \: the \: log \: of \: both \: side \\ log \: {2}^{n} = log \: 21.167 \\ nlog2 = log \: 21.167 \\ divide \: both \: side \: by \: log2 \\ \\ n = \frac{log \: 21.167}{log2} \\ \\ n = 4.4[/tex]
Finally, we shall determine the timeNumber of half-lives (n) = 4.4
Half-life (t½) = 15 days
Time(t) =?t = n × t½
t = 4.4 × 15
t = 66 daysTherefore, it will take 66 days for 0.3 mg of the sample to remain.
Learn more: https://brainly.com/question/25749387