1. Determine the total number of valence electrons in the molecule or ion.
• Add together the valence electrons from each atom. (Recall that the number of valence electrons is indicated by the position of the element in the periodic table.)
•If the species is a polyatomic ion, remember to add or subtract the number of electrons necessary to give the total charge on the ion.
2. Arrange the atoms to show specific connections.
• When there is a central atom, it is usually the least electronegative element in the compound.
• Chemists usually list this central atom first in the chemical formula, which is another clue to the compound’s structure.
• Hydrogen and the halogens are almost always connected to only one other atom, so they are usually terminal rather than central.
3. Place a bonding pair of electrons between each pair of adjacent atoms to give a single bond.
• In H2O, for example, there is a bonding pair of electrons between oxygen and each hydrogen.
4. Beginning with the terminal atoms, add enough electrons to each atom to give each atom an octet (two for hydrogen).
• These electrons will usually be lone pairs.
5. If any electrons are left over, place them on the central atom.
• Some atoms are able to accommodate more than eight electrons.
6. If the central atom has fewer electrons than an octet, use lone pairs from terminal atoms to form multiple (double or triple) bonds to the central atom to achieve an octet.
• This will not change the number of electrons on the terminal atoms.
7. Final check
• Always make sure all valence electrons are accounted for and each atom has an octet of electrons except for hydrogen (with two electrons).
To prove the chemical formula of a compound using the Lewis structure, you need to follow these steps:
1. Draw the Lewis structure of the compound: Start by drawing the Lewis structure of the compound using the valence electrons of each atom. The valence electrons are the outermost electrons of an atom, which participate in chemical bonding. To determine the valence electrons of an atom, you can refer to its position in the periodic table.
2. Determine the number of electrons in the compound: Count the total number of valence electrons in the compound by adding up the valence electrons of each atom in the compound. This number is equal to the sum of the valence electrons of all the atoms in the compound.
3. Determine the number of electron pairs in the compound: Count the number of electron pairs in the compound by dividing the total number of valence electrons by 2. This gives you the number of electron pairs in the compound.
4. Determine the connectivity of the atoms: Identify the connectivity of the atoms in the compound by drawing the lines that connect the atoms in the Lewis structure. Each line represents a bond between the atoms.
5. Determine the formal charge of each atom: Calculate the formal charge of each atom in the compound by subtracting the number of lone pair electrons and half the number of bonding electrons from the total number of valence electrons for that atom. The formal charge of an atom should be as close to zero as possible.
6. Write the chemical formula: Write the chemical formula of the compound by using the symbol of each atom in the compound, along with its subscript, which corresponds to the number of atoms of each element present in the compound.
By following these steps, you can use the Lewis structure of a compound to prove its chemical formula.
Calculate the number of degree of freedom for a system made up of Ice and water at equilibrium. (A) 0 (B) 1 (C) 2 (D) 3
The number of degrees of freedom for a system made up of ice and water at equilibrium is 1.
The correct option is B.
What are thermodynamic degrees of freedom?A molecule's degree of freedom is how many different ways it can move, rotate, or vibrate in space when it is in the gas phase. There are three different kinds of degrees of freedom: translational, rotational, and vibrational.
The Gibbs phase rule states that F = C − P + 2.
where
F is the degree of freedom
C is the component
P is the phase involved
As a result, there are two degrees of freedom for a one-component, one-phase system, and any temperature and pressure are achievable within certain bounds.
From the phase rule formula:
F = C - P + 2
C is water = 1
P is liquid water and ice = 2
Hence,
F = 1 - 2 + 2
F = 1
Learn more about the molecular degree of freedom at: https://brainly.com/question/13040781
#SPJ1
9. What is the density of a cube where all side measures 4cm
and the mass is 464g?
10
is
dsfsfsfdzfsdfsf
Explanation:
If the temperature of a cup of coffee decreases from
60.0°C to 25.0°C, what is the decrease in temperature in
units of degrees Celsius and kelvin?
To convert from Celsuis to Kelvin, add 273 or vice versa to convert from Kelvin to Celsuis.
So 60 Celsius + 273 = 333K
and 25 + 273 = 298K
Therefore we can see the decrease in temperature in units of degrees and Celsuis is 35.
A brewed black tea generally has 81.30 milligrams of TA per 100 mL of water (which is to say it is at equilibrium). If a tea bag is steeped in 150. mL of water, what is the concentration of TA at equilibrium?
A brewed black tea generally has 81.30 milligrams of TA per 100 mL of water (which is to say it is at equilibrium). If a tea bag is steeped in 150. mL of water, 54.2 is the concentration of TA at equilibrium.
What do you mean by the concentration ?A substance's concentration is the amount of solute present in a given amount of solution. Molarity is the number of moles of solute in one liter of solution and is used to express concentrations.
Given:
M₁ = 81.30 milligrams
M₂ = ?
V₁ = 100ml
V₂ = 150ml
M₁V₁ = M₂V₂
By substituting given values in this equation and we get,
81.30 × 100 = M₂ × 150
M₂ = 81.30 × 100 / 150
= 54.2
Thus, 54.2 is the concentration of TA at equilibrium.
To learn more about the concentration, follow the link;
https://brainly.com/question/10725862
#SPJ6
How many O atoms are in 0.150 mol of aspirin, C9H8O4
Answer: 3.61 × 10²³
Explanation:
2.13 pm to meters
Express your answer to three significant figures and include the appropriate units.
The value should be entered as a single number or in scientific notation.
2.13 pm in metre is 2.13 × 10⁻¹²m. Unit conversion is a multi-step procedure that involves adding, subtracting, multiplying, or dividing.
What is unit conversion?Unit conversion is a multi-step procedure that involves adding, subtracting, multiplying, or dividing by a conversion factor. Additionally, rounding and choosing the appropriate number of important digits may be necessary during the procedure. To measure various characteristics, several units of conversion were utilized.
To better comprehend, we convert measurement units in mathematics. For ease of understanding, the height of a tabletop is in inches, but the width of a garden was measured in yards.
2.13 pm to meters
1pm = 10⁻¹²m
2.13 pm × 10⁻¹²m= 2.13 × 10⁻¹²m
Therefore, 2.13 pm in metre is 2.13 × 10⁻¹²m.
To learn more about unit conversion, here:
https://brainly.com/question/19420601
#SPJ1
Balance the chemical equation below
Na HCO3 + H 3 C 6 H 5 07 → CO₂ + +H₂0 + Na ₂ C6 H ₂ O 7
The skeletal equation is:
NaHCO3
Na2CO3 + H2O + CO2 • To equalize sodium, multiply NaHCO3 by 2 2NaHCO3 - Na2CO3 + H2O + CO2
The equation is balanced.
Express your answers as integers separated by commas.
Not enough information man
please due friday but want to do today
Answer: 3.44%
Explanation: try it for math
who was the first human in america
Answer:
no one can really be sure who was the very first human in america, but the Clovis people were the 1st type of people to populate the US. If you meant the person who founded america then Christopher Columbus would be your answer.
Also, not part of the answer, but this is marked in chem? not sure its supposed to be.
All "terminally differentiated" organs are immune to cancer
True or False
Answer:
false
Explanation:
AcPect Chemistry Deta Chemistry is a science of substanc about their properties, structures, and thei comfests mas matter { occupies space (Volume) Branches of Chemistry L organic incudes hydro Carbon (C&H ссян In arganic Chemisitvy: they excRollt Physical Chemsitry
In order to provide for our basic needs of food, clothing, shelter, health, energy, and pure air, water, and soil, chemistry is crucial.
What is chemistry in one word?Chemistry is the field of study that focuses on the physical and chemical characteristics of different types of matter as well as their composition.Organic chemistry is the study of molecules that include carbon. Inorganic chemistry: Inorganic chemistry is concerned with substances like metals and minerals. Physical chemistry: Physics and chemistry are combined in physical chemistry. Biochemistry is the study of the chemical processes that take place within living organisms.In order to provide for our basic needs of food, clothing, shelter, health, energy, and pure air, water, and soil, chemistry is crucial. Chemical technologies improve our quality of life in many ways by offering fresh approaches to issues with health, materials, and energy use.To learn more about chemistry refer to:
https://brainly.com/question/26487468
#SPJ1
Rikki has a sample of water but he is not sure if it is pure or not. He heats the water until it begins to boil. He records the temperature which is 103°C. Is this water pure?
The sample of water is impure because the boiling point is above 100°C.
What is boiling point?Boiling point is the temperature at which a liquid boils, with the vapor pressure equal to the given external pressure.
The boiling point of pure water is 100 °C or 212 °F at 1 atmosphere of pressure (sea level).
The boiling point of water also depends on the purity of the water. Water that contains impurities (such as salted water) boils at a higher temperature than pure water. This phenomenon is called boiling point elevation.
According to this question, a sample of water boils at 103°C, hence, the water is impure.
Learn more about boiling point at: https://brainly.com/question/2153588
#SPJ1
If gold has a density of 19.3 g/cm³ what is the mass of a cube of gold 12.00 cm on a side?
A 3.33 x 10^3 grams
B 3.34 x 10^4 grams
C 2.31 x 10^-2 grams
D 2.32 x 10^2 grams
The mass of the gold is 3.34 x 10^4 grams.
What is density?Density is a measure of mass per unit volume of a substance or object. It is expressed in units such as kilograms per cubic meter (kg/m^3) or grams per cubic centimeter (g/cm^3).
We have the following from the question;
Length of the side of the cube = 12.00 cm
Density of the gold = 19.3 g/cm³
Volume of the gold = l^3 = (12)^3 = 1728cm^3
Mass of the gold = Volume * density of the gold
= 1728cm^3 * 19.3 g/cm³
= 3.34 x 10^4 grams
Learn more about density:https://brainly.com/question/29775886
#SPJ1
helpppppppPPPPPP>>>>>>>>>>>>>>!!!!!!!!!!!!!
Rocks undergo weathering or erosion by water , air or an y mechanical factors. This will decompose the rock to small size and over time the changes to grains.
What is rock weathering ?Decomposition of rocks into smaller rocks and grains is called weathering or erosion. The weathering process is of two types. Chemical weathering and physical weathering.
In chemical weathering, rocks undergo decomposition by the action of water or air. In physical weathering, a rocks breakes by a pressure. In both cases, over long time bigger rocks will change to small rock and grains.
In the given case, the rock changed in shape by decrease the sharpness of its edge. It size reduced by 1mm by one year. However, the hardness or color didn't change.
Find more on rock weathering :
https://brainly.com/question/29762374
#SPJ1
balance the equation NaHCO3+H3C6H5O7=CO2+H2O+NA2C6H5O7
Answer:
The balanced chemical equation for the reaction between sodium bicarbonate (NaHCO3) and citric acid (H3C6H5O7) is:
NaHCO3 + H3C6H5O7 -> CO2 + H2O + Na2C6H5O7
Explanation:
In this reaction, sodium bicarbonate and citric acid react to form carbon dioxide (CO2), water (H2O), and sodium citrate (Na2C6H5O7). The coefficients in front of each substance indicate the relative number of moles of that substance involved in the reaction. In this case, the coefficients are already balanced, meaning that there are equal numbers of atoms of each element on both sides of the equation.
I would greatly appreciate Brainliest.
Have a nice day.
What’s the equipment shown below caused?
The diagram that have been shown represents an electrochemical cell.
What is a cell or battery?A cell is a basic unit of an electrical system that generates electricity from a chemical reaction. It typically consists of two electrodes (anode and cathode) immersed in an electrolyte solution, which allows for the flow of ions between the electrodes.
A battery is a group of cells connected together to provide a more powerful and longer-lasting source of electrical energy. A battery can consist of one or more cells, depending on the required voltage and current output. Batteries are commonly used in portable electronic devices, automobiles, and backup power systems.
Learn more about cell:https://brainly.com/question/19225854
#SPJ1
How many faraday is needed for 127g of Cupper in Chlorine cuprous?
Answer:
One Faraday is the charge of one mole of electrons, which is approximately 96,500 coulombs. To calculate the number of Faradays needed to reduce 127 grams of copper to the cuprous form in chlorine, we need to know the balanced chemical equation for the reaction and the equivalent weight of copper.
Explanation:
How many moles of Cu are found in 9.49x10^21 atoms Cu?
9.49 x 10^21 atoms of Cu is equivalent to 1.58 x 10^-2 moles of Cu.
To convert the number of atoms of copper (Cu) to moles, we need to use Avogadro's number. Avogadro's number is defined as the number of atoms, ions, or molecules in one mole of a substance. It is equal to 6.022 x 10^23.
The number of moles of Cu can be calculated as follows:
9.49 x 10^21 atoms / (6.022 x 10^23 atoms/mol) = 9.49 x 10^21 / 6.022 x 10^23 mol = 1.58 x 10^-2 mol
In a study to determine the rate of the following reaction:
2NO(g) + O₂(g) -> 2NO₂(g)
the concentration of NO was 0.0450 M at t= 5.0 s and 0.0225 M at t= 650.0 s. What is the average rate of the reaction during this time period?
3.68*10-5 m/s is the average reaction speed for this time frame. a single rate that is a weighted average of the different rates that are applicable to property in various locations.
How do you find the average rate of time?It is described as "the ratio of change in reactant or product concentration to change in time in a chemical process." The average rate of the reaction will be negative as the rate of reactant concentration declines. The average rate of reaction will be favorable as the rate of product concentration rises.
2NO(g)+O2(g) -> 2NO_2(g)
Rate = -1/2 d[No]/dt
Average Rate = -1/2[0.0225-0.0700/650-5]
= 3.68*10^-5 m/s
To know more about concentration, visit:
https://brainly.com/question/17206790
#SPJ1
Now, inspect the properties of the unknown elements, compare them to the properties of your known elements, and see where the unknown elements best fit in the table above. Once you’re done, use your periodic table to identify each unknown element below.
Based on the comparison between the properties of the unknown elements and those of known elements, the elements are alkali metals.
The unknown elements are sodium and potassium.
What are the properties of alkali metals?Alkali metals exhibit metal properties such as strong thermal and electrical conductivity, luster, ductility, and malleability. In the outermost shell of each atom of an alkali metal, there is just one electron. Compared to those in inner shells, this valence electron is significantly more loosely bonded.
Other properties of the alkali earth metals are:
Stored in a mineral oil solution.Low melting points.Low densitiesLow electronegativity.Low ionization energy.Learn more about alkali metals at: https://brainly.com/question/30391109
#SPJ1
The wavelength and speed of a wave can be influenced by many factors. Adjust the amplitude and frequency as described in the table below. Then complete the chart to report whenever this causes the wavelength or wave height to increase or decrease. Also tell what effect the change will have on how the wave sounds. Return each variable to its original value after each experiment
The speed of the sound would increase as the wave speed increase.
What is the effect of the wavelength on the speed of sound?
We have to know that the speed of the sound is dependent on the wavelength and the relationship is a direct relationship if the frequency of the sound has been kept as a constant.
We can now be able to write that;
v = λf
v = wave speed
f = frequency
λ = wavelength
Now we can see that is we increase the wavelength of the sound then the wave speed of the sound would also increase .
Learn more about wave speed:https://brainly.com/question/10715783
#SPJ1
Upon decomposition, one sample of magnesium fluoride produced 1.66 kg
of magnesium and 2.56 kg
of fluorine. A second sample produced 1.34 kg
of magnesium. How much fluorine (in grams) did the second sample produce?
The mass of Fluorine in grams in the second sample is 2066 g. The concept law of definite proportions is used here to obtain the mass of Fluorine in the second sample.
What is law of definite proportions?This law was stated by a French chemist, Louis Proust. It states that 'a chemical compound always contains the same elements combined together in the same proportion by mass'.
The mass of Mg in sample 1 is 1.66 kg and that of F is 2.56 kg. The mass of Mg in sample 2 is 1.34 kg and we have to find out the mass of F in second sample.
The mass of Fluorine in sample 2 can be obtained by using the mass ratio of the elements in sample 1.
In sample 1:
Mass of magnesium ÷ Mass of Fluorine = 1.66 kg ÷ 2.56 kg
In sample 2:
By using dimensional analysis,
Mass of Fluorine = 2.56 kg Fluorine ÷ 1.66 kg Magnesium × 1.34 kg Magnesium
Therefore the mass of Fluorine = 2.066 kg
The mass in kilogram can be converted into grams as:
Mass of Fluorine = 2.066 kg × 1000 g ÷ 1 kg = 2066 g
Thus the mass of Fluorine in the second sample is 2066 g.
To know more about the law of definite proportions visit;
https://brainly.com/question/28458716
#SPJ1
A student finds that the mass of a flask is 95.451 g. Her lab partner places a 10.00 mL sample of an
unknown liquid into the flask, and re-weighs it. The mass of the flask plus the liquid is 102.551 g.
What is the mass of the liquid?
According to law of conservation of mass, the mass of the liquid is 7.10 grams.
What is law of conservation of mass?According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
According to law, mass of liquid= mass of flask and liquid-mass of liquid= 102.551-95.451=7.1 00 g.
Thus, the mass of the liquid is 7.10 grams.
Learn more about law of conservation of mass,here:
https://brainly.com/question/28711001
#SPJ1
When 2 moles of ammonia (NH₃) decomposes into nitrogen gas (N₂) and hydrogen gas (H₂), how many moles of hydrogen gas are produced?
Answer:
When 2 moles of ammonia (NH3) decomposes into nitrogen gas (N2) and hydrogen gas (H2), the balanced chemical equation for the reaction is:
2 NH3 -> N2 + 3 H2
Therefore, 3 moles of hydrogen gas (H2) are produced for every 2 moles of ammonia (NH3) that decomposes.
H₂ (g) + CO₂ (g) = H₂O(g) + CO (g)
K = 0.106 at 700 K. If a mixture of
gases that initially contains 0.0150 M
H₂ and 0.0150 M CO2 is allowed to
equilibrate at 700 K, what are the final
concentrations of all substances
present?
CO2(g) + H2(g) CO(g) + H2O(g) Initial no. of moles: 0.45 0.45 0 0 No. of moles
What are the final concentrations of all substances present?A chemical reaction is said to be in a state of chemical equilibrium when both the reactants and the products have reached a concentration that does not change with time. The rate of forward reaction is the same as the rate of backward reaction in this state.
The ratio of the concentrations of the substances on the right to those on the left equals a constant appropriate for that specific reaction in any equilibrium reaction. It is worth noting that the ratio is always written with the products preceding the reactants.
In chemistry, however, solution concentration is often expressed as a "molarity" (a molar concentration), which is defined as the number of moles of solute divided by the number of litres.
To learn more about concentrations refers to:
brainly.com/question/17206790
#SPJ1
I need to the Average Density and show calculations.
The average density is 0.954 g/ mL
The mean or average density is the total mass of a region divided by the entire volume of that region. Calculating the average density of a mixture involves multiplying the densities of each compound by its volume, then dividing the result by the sum of all the volumes.
The mass of the object divided by its volume is referred to as the average or "mean" density. For mass, we'll use grams (g), and for volume, we'll use cubic centimeters (cm³).
The average density can be calculate as follows:Average density = density ₁ +density ₂
number of density
Average density = 0.954 g/ml +0.954 g/ml
2
Average density = 0.954 g/mL
Learn more about density at https://brainly.com/question/29775886
#SPJ1
Course Activity: Oxidizing and Reducing Chemicals (CHEMISTRY EDMENTUM)
TASK 2 PART C:
-Compare the mass of the zinc strip from test tube 5 with the mass of the same strip measured in task 1, part A. Based on your observations of the metal strip, explain what factors may have added to its mass or caused a decrease in its mass. Which had the greater effect? Explain your reasoning.
PLEASEE GIVE A GOOD RESPONSE I'M SO LOST
The electrolytic reaction between Zn and Ag results in the oxidation of Zn and reduction silver metal. The oxidation of Zn make the Zn ions pass into the solution and its mass decreases.
What is electrochemical reaction ?An electrochemical cell converts chemical energy to electrical energy. It involves redox reaction of two metallic electrodes. The electrode with higher negative electrode potential undergo oxidation and one with lower negative or having positive potential undergoes reduction.
The electrode which undergo oxidation is consumed in the process and metal gets ionized. Ions move into the electrolyte. Whereas, the ions of the second electrode gets reduced into metallic state and deposits on the electrode.
In this case, Zn is oxidizing and it is consumed to reduce the silver metal on the cathode. Therefore, the mass of Zn metal decreases in the strip.
Find more on electrochemical cells:
https://brainly.com/question/22433727
#SPJ1
Intermolecular attractions that form between nonpolar substances in water are called__________
interactions.
Intermolecular attractions that form between nonpolar substances in water are called Hydrophobic interactions.
What do you mean by Intermolecular attraction?Intermolecular attraction refers to the attractive forces between molecules. These forces determine many of the physical properties of a substance, such as its boiling and melting points, surface tension, and viscosity. There are several types of intermolecular attractions, including hydrogen bonding, dipole-dipole interactions, and London dispersion forces.
Hydrogen bonding occurs between molecules that contain hydrogen and electronegative elements such as nitrogen, oxygen, and fluorine. Dipole-dipole interactions occur between polar molecules, where one end is positively charged and the other end is negatively charged. London dispersion forces are the result of temporary dipoles that form in nonpolar molecules and attract each other.
Intermolecular attraction plays a crucial role in the behavior of liquids and solids, and it helps to explain the properties of substances such as why some substances are liquids at room temperature, while others are solids. The strength of intermolecular attractions can be influenced by temperature, pressure, and other environmental factors, which can have a significant impact on the physical properties of a substance.
To know more about Hydrophobic visit:
https://brainly.com/question/6817053
#SPJ1
Do you guys know the balancing Au(s) + KNO3 ->
Strong oxidizer potassium nitrate, or KNO3, is a crystal salt that is employed in fertilizer, medicine, and the production of gunpowder. The artificial nitrates salt of potassium is called potassium nitrate.
K in terms of coefficient:The K factor, also known as the viral coefficient, calculates how many additional users a single new user contributes to your lifetime total. If a SaaS company's software is good, its customers will recommend it to other friends, teams, and businesses.
KNO3 is endothermic, why?Because more energy is needed to separate the potassium potassium ions or nitrate anions from one another in solids than is released whenever these ions are hydrated, this occurs. It is therefore an endothermic process.
To know more about potassium nitrate visit:
https://brainly.com/question/15080595
#SPJ1