Answers
Answer:
1. Rain
2.frozen rain
3.clouds
4.when its at its freezing point which is 32 degrees Fahrenheit
5.a form of precipitation with little ice pellets
6.hail is formed when rain is carried up into cold part of the air
7.a thunderstorm
8.its basically just ice
9.It can cause bad dents in a car
10.he was a meteorologist and a photographer
Explanation:
2.snow is defined as ‘solid precipitation which occurs in a variety of minute ice crystals at temperatures well below 0°C but as larger snowflakes at temperatures near 0°C
3.Within a cloud, water droplets condense onto on another, causing the droplets to grow. when these water droplets get to heavy to stay suspended in the cloud, they fall to earth as rain...water vapor turns into clouds when it cools and condenses-that is, turns back into liquid water or ice.
4.freezing rain develops as falling snow encounters a layer of warm air deep enough for the snow to completely melt and become rain...when the supercooled drops strike the frozen ground(power lines, or tree branches), they instantly freeze, forming a thin film of ice, hence freezing rain.
5.a form of precipitation consisting of ice pellets, often mixed with rain or snow.
6. Hailstones are formed when raindrops are carried upward by thunderstorm updrafts into extremely cold areas of the atmosphere and freeze...the hail falls when the thunderstorms updraft can no longer support the weight of the hailstone,which can occur if the stone becomes large enough or the updraft weakens.
That’s all I can do but you should put it in your own words too:)
Related Questions
A closed container in lab contains a sample of oxygen gas. When the temperature in lab is 16.3 degrees Celcius, the pressure in the container is 9.30 atm. What would the temperature in lab be (in Celcius) if the pressure in the container was 17.7 atm? Assume the mol and volume of the container are constant. Record your answer as a number with the correct significant figures.
Answers
Answer:
T₂ = 550.60 K
Explanation:
Given data:
Initial temperature = 16.3°C (16.3+273 = 289.3 K)
Initial pressure = 9.30 atm
Final temperature = ?
Final pressure = 17.7 atm
Solution:
According to Gay-Lussac Law,
The pressure of given amount of a gas is directly proportional to its temperature at constant volume and number of moles.
Mathematical relationship:
P₁/T₁ = P₂/T₂
Now we will put the values in formula:
9.30 atm / 289.3 K = 17.7 atm/T₂
T₂ = 17.7 atm × 289.3 K / 9.30 atm
T₂ = 5120.61 atm. K /9.30 atm
T₂ = 550.60 K
Answer:
????????
Explanation:
Which of the following most likely happens during a chemical change?
No new substances are formed.
Properties of a substance remain unchanged.
Composition of a substance is same as before.
Different substances than before are produced.
Answers
Answer:
Different substances than before are produced.
Explanation:
a chemical change happens when one chemical substance is transformed into a different substance
Please help y’all I don’t understand
Answers
Answer:
D.
Explanation:
You try to get 8 electron on the outermost "shell" so you have no left over or "valence" electrons.
What is a mixture in science?
Answers
Answer:
Different elements together that can be separated again
Answer:
a mixture is a material made up of two or more different substances which are physically combined.
Explanation:
The type of heat transfer responsible for distributing most of the heat throughout Earth's atmosphere is
A.radiation
B.conduction
C.convection
Answers
Answer:
A
Explanation:
A.
Explanation:
hope it helps. if im incorrect. please report so people don't think its the correct answer. <3
Question: Animals respond to threats in their environment by attacking or escaping. Either response is the result, mostly, of interactions between...
Answers: A.The circulatory system and the reproductive system.
B.Blood circulation and hormone production.
C.The nervous system and the muscular system
D.Respiratory rates and defense against pathogens.
Answers
But to be honest I haven’t done this in awhile
Animals respond to threats in their environment by attacking or escaping is the result of interactions between the nervous system and the muscular system.
What is nervous system?The nervous system is the largest controlling, intercommunicating and regulative system in the body.
Animals respond to threats in their environment by two ways-
They attack to the threats.They escape from the threats.Either response is the result, mostly, of interactions between the nervous system and the muscular system. This system includes all the muscles in the body and nerves.
The nervous system is the connection between the thoughts of brains to the different parts of the body to take the necessary action.
Thus, the animals respond to threats in their environment by attacking or escaping is the result of interactions between the nervous system and the muscular system.
Learn more about the nervous system here;
https://brainly.com/question/869589
Which produces more energy, aerobic respiration or fermentation
Answers
Answer:
Aerobic Respiration.
Explanation:
Aerobic respiration refers to the metabolic pathways by which organisms break down glucose to produce ATP. ... Fermentation produces relatively less energy than respiration, because fermentation does not result in the complete oxidation of glucose.
Scientists frequently use all of the following to support the theory that organisms change over time except.
Chocies:
1. Similarities in DNA
2. Similarities in early development
3. Similarities in body structure
4. Similarities in number of mates.
This is for science
Answers
Answer:
4
Explanation:
The gradual change in the species over the periods is called evolution. These changes help species to survive in nature and adapt to their surrounding.
The correct answer to the question is option D which is Similarities in a number of mates.
What is DNA?The molecule which stores all the genetic information of the body and regulates the formation of protein and hormones is called DNA.According to the question, the correct answer is option D because the number of mates can not help in the study of the evolution factor.
Hence, the correct answer is option D.
For more information about the question, refer to the link:-
https://brainly.com/question/5763151
Warning
Excessive moisture has been observed in the atmosphere, along with thick cumulonimbus clouds. Expect heavy winds, rain, lightning, and possibly hail.
What type of severe weather is being described?
Blizzard
Hurricane
Thunderstorm
Tornado
Answers
Answer: Hurricane
Explanation:
How are reactivity patterns on the periodic table related to an element's use in everyday applications?
Answers
Answer:
•The position of the electron in the atom can be explained by the presence of a concentric shell around the nucleus. The number of electrons in the outer shell of an atom determines its reactivity. Rare gases are less reactive because they have a completely electron shell.
Explanation:
PLEASE HELP ASAP
Is mass conserved when 40 g of sodium hydroxide undergoes a chemical change during an interaction with 36.5 g of hydrogen chloride? Use complete sentences to support your answer by explaining how this can be demonstrated.
Answers
Answer:
Explanation:According to the law of conservation of mass (mass remains the same throughout a reaction), mass is conserved in this case. This can be proven by comparing the weight of two enclosed glass containers of the reaction. They will most likely have the same weight because the products the chemical reaction creates would most likely produce a gas that can be trapped if there is no opening in the glass container. To further investigate, compare the weights of the products of the reaction with an enclosed container to another container with no lid of the same reaction.
the color of a mineral is powdered form
a. luster
b.streak
c.hardness
science i need help please
Answers
Answer: Streak
Explanation: The color of a mineral in powdered form is called the mineral's streak. To find a mineral's streak, the mineral is rubbed against a piece of unglazed porcelain called a streak plate. The mark left on the streak plate is the streak.
The streak of a mineral is its powder's color, because streak does not vary, it is a more dependable quality than color. Minerals of the same color may have a streak of a different hue, hence option B is correct.
The streak of a mineral refers to the color of the material when it is in powdered form. A streak plate is an unglazed piece of porcelain that is used to locate a mineral's streak. The streak is the mark that was left on the streak plate.
When minerals are powdered, they often take on a distinct hue than when they are in crystal or massive form. It might be a completely different tint or a completely different color.
Learn more about streak, here:
https://brainly.com/question/5390995
#SPJ6
With unbalanced forces, the object will move in the direction of the _____ force.
A) cannot be determined
B) larger
C) equal
D) smaller
Answers
when it’s larger the force has more mass thus pushing the weaker or smaller side
Answer:
b: LARGER
Explanation:
im just different :)
Explain how convection transfers heat. Use information from this video above. Make sure you include the words: heat, density, convection, particles in your answer.
Answers
The heat in particles travels through convection at a certain speed depending on what density a mass has.
Question 2 (2 points)
(03.01 LC)
There are more protons than electrons in a positively charged atom. (2 points)
OTrue
OFalse
Answers
Answer:
True.
General Formulas and Concepts:
Chemistry
Reading a Periodic TableNeutral Atoms and IonsChargesExplanation:
Protons have a positive (+) charge.
Electrons have a negative (-) charge.
If the ion is positively charged, that means that there are more protons than electrons. Therefore, the statement is true.
PLEASE HELP ME ASAP!!! THIS IS DUE UNTIL 1:30 PM!!! Tell how many Elements are in this compound and tell what the Elements are. NaClOFeCoH
Answers
Answer: 13
Explanation: I got it right
Answer:
6 elements
Explanation:
each element Na, Cl, O, Fe, Co, H
NEED HELP! ASAP! analyze and state the relationship between the independent and dependent variable by describing how the dependent variable reacted to the change in the independent variable. If you used a control, you shoukd compare the data to the control.
Answers
Answer: Depends on the experiment.
Explanation:
For any experiment, the fact remains that the independent variable always affects the measurement of the dependent variable. The independent variable is the factor in the experiment that you are changing. The dependent variable is, more often than not, the result of the change. Compare the relation between the two sets of data - probably graph it if it helps. The control data is the set of data gathered from the experiment where all the factors are not changed and are standardized. This is, in essence, the "original" data. Compare the changed data to this data. Hope it helped!
PLZ HELP BC MY TEACHER IS NOT A GOOD TEACHER (this is science)
Suppose water, carbon dioxide, and nitrogen were not recycled. What effects might this have on life on Earth?
Answers
The water would be dirty and not healthy to drink or swim in. Carbon dioxide would make breathing very hard, animals and humans would die.
Good luck
Answer:
Sorry if this is long-
Explanation:
If water wasn't isn't recycled then all living things will eventually die out, everything on this earth that's alive needs water to live. removing water from the whole earth will kill all life and remove the most important greenhouse gas from the atmosphere.
If carbon dioxide wasn't recycled it will be removed from the atmosphere. and all the plants will die due to the lack of carbon dioxide. however, if you JUST remove carbon dioxide, plants and all animals will die due to the collapse of the food web, but there's a chance that certain species of bacteria will still live. you are also removing another green house gas from the atmosphere.
Without these green house gasses regulating the earths temperature. the earth may go into a deep freeze.
Nitrogen is an important component in amino acids. Organisms use amino acids to build proteins from dna. all living organisms use proteins for just about everything, from digestion to DNA replication. if we deplete our nitrogen, no organism on the earth can create proteins. which means, no organism can exist. Also the 4 bases of dna (adenine, guanine, cytosine, and thyamine) are nitrogen based. Without nitrogen you can't have DNA.
this is the last free pts for the day but you have to answer this still to earn Brainliest, k? Guess what time zone I live in, dudes? ;)
I'm a girl btw
Answers
Answer:
ummm Eastern time zone
Answer:
mountain time zone?
Explanation:
thats where im in :)
Please help y’all I don’t understand
Answers
Answer:
2 electrons
Explanation:
If you look at the periodic table, you will see that oxygen is in group 16. If you subtract 10 from 16, you will get 6 electrons, which means oxygen has 6 valence electrons. In order to become stable, you need 8 electrons. So add 2.
please helpppppppp.will give 12 points
Answers
I’m not super sure.
Answer:
Heat
Explanation:
When energy transfers, due to the difference in temperatures, the energy that is passed on from a surface to another surface is heat. Therefore, we get heat transfer. Heat transfers happen in 3 ways radiation, convection, and conduction.
Hoped this helped!
Please help y’all I don’t understand
Answers
Answer:
I believe it is 2
Explanation:
I just learned this in my class too, so I'm not sure
because you can only merge 4 into 2 :)
Sulfuric acid is a colorless, oily liquid, used in the manufacturing of detergents, fertilizers, dyes and pigments, and even explosives. The chemical formula for sulfuric acid is H2SO4. Students were asked to make claims about how many total atoms are in this formula and support their claim with evidence. Choose the correct claim with the best supporting evidence. A. Ryan said there are 8 total atoms: two hydrogen (H) atoms, two sulfur atoms (S), and four oxygen (O) atoms. B .Camila said there are 7 total atoms: one hydrogen (H) atom, two sulfur atoms (S), and four oxygen (O) atoms. C. Parris said there are 7 total atoms: two hydrogen (H) atoms, one sulfur (S) atom, and four oxygen (O) atoms. D. Anthony said there are 10 total atoms: two hydrogen (H) atoms, four sulfur (S) atoms, and four oxygen (O) atoms.
Answers
Answer:
Sulfuric acid is the most widely used acid in industry. It is used to make detergents, dyes, drugs, explosives, pigments, fertilizers, and many other products. It is also the acid in lead-acid electric batteries. Chemical formula: H2SO4.
Explanation:
I hope this helps! :)
Describe reflection using the terms incident ray and reflected ray.
if you don't know, don't answer.
Answers
Answer:
A ray of light that hits a polished surface is called an incident ray and a ray of light that gets reflected is called a reflected ray. The point at which the light hits the surface is called the point of incidence. A line perpendicular to that point is called the normal.
Explanation:
I want to answer correctly and not for the points.
Make an observation about the average height of the beanbag for each mass dropped. How does it compare with your calculated kinetic energies for each mass? When the bottle has more mass, does the beanbag seem to travel to greater heights? Record your general observations in Table A.
Answers
Answer:
The more mass the bottle has the higher the beanbag goes.
Explanation:
thank you.
What are the regions of the spectrum with wavelengths that can pass through the atmosphere called?
Answers
Answer:
These regions of the spectrum with wavelengths that can pass through the atmosphere are referred to as "atmospheric windows." Some microwaves can even pass through clouds, which make them the best wavelength for transmitting satellite communication signals.
Explanation:
Hope this helps. Have a great rest of your day :)
I'm very tired so if you could help with these that would be great.
Answers
Here you go hope this helps
pleassssse helpppppp
Answers
Answer:
Solar Energy
Explanation:
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!The point within the earth where the earthquake originates.
Which seismic waves are call “push/pull” because they compress and extend as theymove through the earth? *
Which type of seismic wave can move through solid layers of the earth but not through the liquid outer core? *
Which seismic wave is the first to reach a seismic station, and therefore is the fastest? *
Answers
Answer:
1.A 2.P waves are the fastest kind of seismic wave. a longitudinal P wave has the ability to move through solid rock and fluid rock, like water or the semi-liquid layers of the earth. It pushes and pulls the rock it moves through in the same way sound waves push and pull the air. 3.The second type of body wave is the S wave or secondary wave, which is the second wave you feel in an earthquake. An S wave is slower than a P wave and can only move through solid rock, not through any liquid medium. It is this property of S waves that led seismologists to conclude that the Earth’s outer core is a liquid. 4.P Waves The first kind of body wave is the P wave or primary wave. This is the fastest kind of seismic wave, and, consequently, the first to 'arrive' at a seismic station. The P wave can move through solid rock and fluids, like water or the liquid layers of the earth.Explanation:
CAN SOMEONE PLS HELP ME? IDK HOW TO MAKE CONCLUSIONS. JUST TEACH ME HOW :)
How to state whether your hypothesis is supported or not supported by your results?