HELP ME PLSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS

Answer:

One function of iron in animals is to transport oxygen in the bloodstream as part of the hemoglobin molecule.

The green color light is being transmitted.

The violet, red and orange wavelengths are absorbed.

What is color transmitted?

Light transmits when it penetrates a surface. This can be observed with materials like glass or transparent plastic using visible frequencies. The transmitted light allows us to see through these materials.

Electromagnetic radiation that can be seen by the human eye is known as light or visible light. Typically, visible light is defined as having wavelengths between 400 and 700 nanometers (nm), or frequencies between 750 and 420 terahertz, which fall between the longer-wavelength infrared and the shorter-wavelength ultraviolet (with shorter wavelengths).

The color of the solution is green.

Thus the solution is transmitted green.

The remaining color is absorbed by the solution.

The absorbed colors are violet, red, and orange wavelengths.

To learn more about light, click on the below link:

https://brainly.com/question/29729777

#SPJ4

The theoretical yield for this reaction is 78.61 g of CO2 and the percent yield is 20.0%, when 50.0 g of MgCO3 react completely with H3PO4.

The theoretical yield is the maximum amount of product that can be produced from a chemical reaction, calculated using the stoichiometry of the reaction equation. It is based on the assumption that the reaction proceeds perfectly, without any loss or waste of reactants, and without any interference from side reactions.

The theoretical yield is calculated by determining the number of moles of each reactant, using the balanced chemical equation to calculate the number of moles of product that can be produced, and then converting this to the corresponding mass of product. It is a useful reference for determining the efficiency of a reaction and for evaluating the quality of the results obtained in a laboratory experiment.

Calculation of Theoretical yield

To calculate the theoretical yield, determine the number of moles of MgCO3 and use the balanced chemical equation to calculate the number of moles of CO2 produced.

The number of moles of MgCO3 is given by:

n(MgCO3) = m(MgCO3) / M(MgCO3)

n(MgCO3) = 50.0 g / 84.31 g/mol

n(MgCO3) = 0.595 mol

Using the balanced chemical equation, calculate the number of moles of CO2 produced:

n(CO2) = 3 * n(MgCO3)

n(CO2) = 3 * 0.595 mol

n(CO2) = 1.785 mol

The mass of CO2 produced can then be calculated:

m(CO2) = n(CO2) * M(CO2)

m(CO2) = 1.785 mol * 44.01 g/mol

m(CO2) = 78.61 g

This is the theoretical yield for the reaction.

The percent yield is a measure of the efficiency of the reaction, and is calculated as the ratio of the actual yield to the theoretical yield, multiplied by 100:

% yield = (actual yield / theoretical yield) * 100

% yield = (15.8 g / 78.61 g) * 100

% yield = 20.0%

To know more about Theoretical Yield, visit:

https://brainly.com/question/25996347

#SPJ1

I don’t have the ASM Handbook. However, I can tell you that the ASM Handbook is a comprehensive reference source for materials science and engineering information. The tensile strength and yield strength of 316 stainless steel (annealed or cold worked) can be found in Volume 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, under the section on stainless steels.

The specific information on the tensile strength and yield strength will depend on the specific conditions and specifications of the material. The citation for the information can be found in the ASM Handbook.

Learn more about tensile strength here: https://brainly.com/question/15604103

#SPJ4

The approximate mass of mercury required to fill a 4.0 ounce bottle is 1632 g .

An ounce is approximately 30 cm3, so the calculation is as follows: 13.6 g/cm3 x 30 cm3 = 408 g. Since there are 28.35 g in an ounce, 408 g / 28.35 g = 14.4 ounces.

The reason why mercury is so dense is because it is a heavy metal composed of molecules that are closely packed together. This makes it very heavy for its volume, and it is one of the densest elements found in nature. It also has a high boiling point, making it ideal for use in thermometers and other temperature measuring instruments. In addition, mercury is a liquid at room temperature, which makes it easy to measure and pour.

Learn more about the density of mercury:

https://brainly.com/question/30459511

#SPJ4

The final temperature of the mixture of 200 g of granite at 100 °C and 1,000 g of water at 20 °C is 79.87 °C.

The temperature change of the water is 2.93 °C, and the temperature change of the granite is -78.58 °C. The heat energy (q) gained by the water is 14,844.14 joules.

To calculate the specific heat (c) of granite, you would use the equation

which can be rearranged to c = q/(mΔT). Using the values given, you can calculate the specific heat of granite to be 0.1882 J/g°C. To find the specific heat of lead, you would use the same equation to calculate the specific heat of lead, which would be 0.1296 J/g°C.

Learn more about substance temperature:

https://brainly.com/question/25677592

#SPJ4

Drawing two straight lines connecting the data points above and below the freezing point allows one to infer the solution's freezing point from the graph.

The freezing point of the solution is the temperature that corresponds to the point where the two lines converge.

Pure liquid cooling curves are different from solution cooling curves. Since a pure liquid freezes at a constant temperature, a flat, horizontal zone is anticipated on the cooling curve. If the cooling is kept up until all of the liquid has solidified, the temperature will eventually drop to the bath's temperature as the solid cools. On the other hand, for a solution, the temperature drops at a slower pace when freezing takes place. This happens because the solvent is freezing out completely, increasing the concentration of the liquid solution.

Learn more about Freezing point here:

https://brainly.com/question/1550397

#SPJ4

Answer:

1 grams NH3 is equal to 0.058718113128665 mole. Note that rounding errors may occur, so always check the results. Use this page to learn how to convert between grams NH3 and mole.

Explanation:

The antiseptic may affect the results of tests for bilirubin uric acid is Povidone-iodine.

Polyvinylpyrrolidone (povidone, PVP) and elemental iodine combine chemically to form the stable compound known as povidone-iodine. On a dry basis, it has a 9.0% to 12.0% available iodine content. H. A. Shelanski and M. V. Shelanski found this particular complex in 1955 at the Industrial Toxicology Laboratories in Philadelphia.

The compound was discovered to be less harmful to mice than tincture of iodine during in vitro tests to exhibit anti-bacterial efficacy. Clinical tests on humans revealed that the medication outperformed competing iodine formulations. Povidone-iodine was marketed right away and has since taken over as the most widely used iodine antiseptic.

To know more about Povidone-iodine -

https://brainly.com/question/13026792?referrer=searchResults

Povidone-iodine is an antiseptic that may affect the results of tests for bilirubin and uric acid. Povidone-iodine is a commonly used antiseptic that can be applied topically to the skin to reduce the risk of infection during medical procedures. However, it can also interfere with certain laboratory tests, including tests for bilirubin and uric acid.

Bilirubin is a yellow pigment that is produced when red blood cells break down, and it is excreted by the liver. Uric acid is a waste product that is produced when the body breaks down purines. Both bilirubin and uric acid can be measured through laboratory tests to help diagnose certain medical conditions.

However, povidone-iodine can interfere with these tests by reacting with the substances being tested, leading to inaccurate results. It is important for healthcare professionals to be aware of the potential for povidone-iodine to affect laboratory test results and take appropriate measures to minimize this risk, such as avoiding its use immediately prior to testing.

Know more about "Uric acid":-

https://brainly.com/question/1442896#

#SPJ11

Answer: 145.84376 grams (i think)

Explanation: i searched it

The partial pressure of nitrogen gas in the tank would be 1050 kPa.

According to the law of partial pressure of gases, the pressure of a gas mixture would be the sum of the individual pressure of the component gases.

The mole fraction of nitrogen gas in the gas mixture = 1/4

The mole fraction of hydrogen gas = 3/4

The total pressure in the tank before the reaction = 4200 kPa

Partial pressure of nitrogen = 1/4 x 4200 = 1050 kPa

In other words, the partial pressure of nitrogen gas in the mixture before the reaction would be 1050 kPa.

More on the partial pressure of gases can be found here: https://brainly.com/question/13199169

#SPJ1

Answer:

1050 kPa.

Explanation:

Taking into account the reaction stoichiometry, 1.245 moles of O₂ is required to react and 0.83 moles of N₂ are formed when 1.66 moles of NH₃ react.

In first place, the balanced reaction is:

4 NH₃ + 3 O₂ → 2 N₂ + 6 H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The following rule of three can be applied: If by reaction stoichiometry 4 moles of NH₃ react with 3 moles of O₂, 1.66 moles of NH₃ react with how many moles of O₂?

moles of O₂= (1.66 moles of NH₃× 3 moles of O₂)÷ 4 moles of NH₃

moles of O₂= 1.245 moles

Finally, 1.245 moles of O₂ is required to react.

The following rule of three can be applied: if by reaction stoichiometry 4 moles of NH₃ form 2 moles of N₂, 1.66 moles of NH₃ form how many moles of N₂?

moles of N₂= (1.66 moles of NH₃× 2 moles of N₂)÷ 4 moles of NH₃

moles of N₂= 0.83 moles

Finally, 0.83 moles of N₂ are formed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

C(s) + O2(g) → CO2(g) is the equation for the production of carbon dioxide gas.

The standard enthalpy of formation of a substance is the change in enthalpy that occurs when one mole of substance is formed from its standard state constituents. A pure element in its standard state has a standard enthalpy of formation of zero. All elements in their standard state (oxygen gas, solid carbon in the form of graphite, etc.) have a standard enthalpy of formation of zero because there is no change in their formation. C(s) + O2(g) → CO2(g) is the equation for the production of carbon dioxide gas. 

Learn more about enthalpy

brainly.com/question/28303513

#SPJ4

The heat that is supplied is  556 J.

We have to note that when we boil water that there is transformation of the heat energy to water and this is what is going to cause the temperature of the water to rise. In this case, we would med to get the heat that has been imparted to the water as we can see in the question.

We have to note that;

H = mcdT

m = mass of the water

dT = temperature change

c = heat capacity

H = 10.1 * 4.2 * (38 - 24.9)

H = 556 J as we can see.

Learn more about heat:https://brainly.com/question/1429452

#SPJ1

If the initial temperature of the cold water is T1 and the final temperature is T2, then the change in temperature of the cold water is given by T2 - T1.

What is temperature?

Temperature is a measure of the average kinetic energy of the particles in a material. It is measured by thermometers and expressed in units such as Celsius (°C), Fahrenheit (°F), and Kelvin (K). Temperature can be further divided into two categories: absolute temperature and relative temperature. Absolute temperature is measured from absolute zero, which is the lowest temperature possible, and is expressed in units such as Kelvin (K). Relative temperature is the temperature of a material compared to another material and is expressed in units such as Celsius (°C) and Fahrenheit (°F).

To learn more about temperature
https://brainly.com/question/4735135

#SPJ4

Triglycerides are the type of molecule NEVER contains a phosphate group.

Triglycerides are a type of lipid molecule composed of three fatty acid molecules attached to a glycerol backbone. These molecules do not contain a phosphate group and the structure is represented as follows:

C3H5(OH)3 + 3C17H33COO → C3H5(OH)3(C17H33COO)3

Triglycerides are an important source of energy for the body, and they also help to store and transport certain vitamins and hormones. High levels of triglycerides can increase the risk of heart disease, stroke, and other health problems. To lower triglycerides, people should eat a healthy diet, get regular exercise, and limit their intake of processed and sugary foods.

learn more about Triglycerides Refer:brainly.com/question/5096426

#SPJ4

complete question:Which type of molecule NEVER contains a phosphate group?

a. ATP

b. phospholipid

c. nucleic acid

d. triglycerides

Metal sulfides are compounds that contain sulfur and a metal. When these compounds are heated with oxygen, the sulfur and metal combine with the oxygen to form a metal oxide and sulfur dioxide gas.

The chemical equation for this process is: 2MS + O2 → MO + 2SO2, where M is the metal and S is the sulfur. In this equation, the MS represents the metal sulfide, and the MO represents the metal oxide. The oxygen combines with the sulfur and metal to produce the metal oxide and sulfur dioxide gas. The sulfur dioxide gas is a hazardous air pollutant and can cause health problems if inhaled.

learn more about metal sulfide Refer:brainly.com/question/14839148

#SPJ4

The chemical formula which represents an ionic compound is KCl or potassium chloride.

Chemical  formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols  of elements. It also makes use of brackets and subscripts.

Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form  is called empirical formula.

It is not the same as structural formula and does not have any information regarding structure.It does not provide any information regarding structure of molecule as obtained in structural formula.

Learn more about chemical formula,here:

https://brainly.com/question/29031056

#SPJ1

Answer:

2.0 x 10^-21 kilograms

Explanation:

Dimensional analysis is a technique for converting between different measuring units. The procedure is identifying the measurement units involved, figuring out the conversion factor between them, and then utilising the conversion factor to compute the desired outcome.

We need to translate 2.0 x 10-15 grams to kilograms in this instance. One kilograms is equivalent to 106 grams. In order to find the kilograms. We can divide the amount of grams by 106:

2.0 x 10-15 grams per 106 is 2.0 x 10-15 kilograms per 106 grams, or 2.0 x 10-21 kilograms.

Consequently, 2.0 x 10-15 grams are equal to 2.0 x 10-21 kilos.

Answer:

Explanation:

Use energy-efficient appliances and light bulbs.

Unplug electronics when they're not in use.

Set your thermostat to a lower temperature in the winter and a higher temperature in the summer.

Seal air leaks around windows and doors.

Use a programmable thermostat to automatically adjust the temperature.

Wash clothes in cold water.

Use a clothesline or drying rack instead of a clothes dryer.

Turn off lights when leaving a room.

Plant trees or install shading devices to block the sun's heat.

Drive less and carpool or use public transportation more.

If 65.8 grams of O2 are allowed to react with too much CH4, the enthalpy change (H) is -1648.11 kJ.

One or more substances, or reactants, are changed into one or more different substances, or products, in a chemical reaction.

The following response is

CO2 + 2H2O = CH4 + 2O2 + g (g) ΔH = -802 kJ

Using this formula, we can determine how many moles there are.

Given Mass/Molar Mass x Number of Mole

Here,

If oxygen weighs 65.8 g, then

Oxygen's molar mass is 16 g/mol.

Now,

Given Mass/Molar Mass x Number of Mole

= 65.8/16

= 4.11 moles

802 kJ of energy are given off by 2 moles of oxygen.

Therefore, 4.11 moles of O2 releases =

= 1648.11 kJ

As a result, enthalpy change (H) = -1648.11 kJ.

The complete question is,

Think about the following thermochemical formula:

CH4 (g) + 2 O2(g) CO2 (g) + 2 H2O (g) ΔH = -802 kJ

If 65.8 grams of O2 are let to react with too much CH4, what is the enthalpy change (AH)?

To learn more about chemical reaction refer to:

Visit brainly.com/question/11231920

#SPJ1

Answer and Explanation:

When methane (CH4) and chlorine (Cl2) react, a substitution reaction takes place. Specifically, the reaction is a halogenation reaction, in which one or more hydrogen atoms in the methane molecule are replaced by chlorine atoms. The reaction can be represented by the following equation:

CH4 + Cl2 → CH3Cl + HCl

In this equation, CH3Cl represents chloromethane, which is a type of organochlorine compound. The reaction is typically initiated by ultraviolet (UV) light or heat, and it proceeds through a series of free radical chain reactions. The products of the reaction are typically a mixture of chloromethane and hydrogen chloride (HCl) gas.

The volume of a dilute aqueous solution can vary depending on the concentration of the solution.

However, we can make an estimate based on the assumption that the solution has a density of approximately 1 g/mL. This means that 1 mL of the solution would weigh approximately 1 gram.

Therefore, 10.65 grams of the solution would have a volume of approximately 10.65 mL. To be more precise, you would need to know the exact density of the solution, as different solutions can have different densities, even if they are dilute aqueous solutions.

To know more about concentration of the solution, visit the link given below:

https://brainly.com/question/24316606

#SPJ4

(ii) Sodium chloride must be dissolved in a suitable solvent,

(iii) The ionic half equation for the electrolysis is

Electrolysis is a process in which electrical energy is used to drive a non-spontaneous chemical reaction.

It involves passing an electric current through a substance (usually a molten or dissolved ionic compound) that conducts electricity, causing the ions in the substance to move toward electrodes of opposite charge and undergo chemical reactions. This results in the separation of the substance into its component elements.

(ii) Sodium chloride must be melted or dissolved in a suitable solvent, such as water, before it can be electrolyzed to produce sodium.

(iii) The ionic half-equation for the change that occurs at the cathode during the electrolysis of sodium chloride is:

2Na+ + 2e- -> Na (sodium metal at cathode)

Learn more about electrolysis at:

https://brainly.com/question/276473

#SPJ1

Freezing-point depression is not the preferred method for determining the molar mass of water-soluble solutions because it is not always reliable when dealing with complex compounds.

This is because the freezing point of a solution is affected not only by the molar mass of the solute, but also by its solubility and other factors such as the presence of impurities.

Therefore, other methods such as vapor pressure or osmometry are better suited for determining the molar mass of water-soluble solutions, as these methods are more reliable and accurate.

Learn more about freezing point depression:

https://brainly.com/question/27184453

#SPJ4

The empirical formula of the compound is C2H2O2, with hydrogen having a subscript of 2.

The equation for combustion of the unknown compound is:

CxHyOz + O2 → CO2 + H2O

Therefore, the equation for this particular combustion reaction is:

1.200g CxHyOz + 32.00g O2 → 2.086g CO2 + 1.134g H2O

Rearranging the equation, we get:

1.200g CxHyOz → 2.086g CO2 + 1.134g H2O - 32.00g O2

Dividing both sides of the equation by the molar mass of the compound:

[tex]\frac{(1.200g CxHyOz)}{(x(12.01) + y(1.008) + z(16.00))}\\ \\=\frac{ (2.086g CO2 + 1.134g H2O - 32.00g O2)}{(44.01)}[/tex]

After simplifying, we get:

[tex]\frac{(1.200g CxHyOz)}{(x(12.01) + y(1.008) + z(16.00)) }\\\\= 0.0478[/tex]

Therefore, the empirical formula of the compound is C2H2O2, with hydrogen having a subscript of 2.

learn more about empirical formula Refer:brainly.com/question/14044066

#SPJ4

5.33 moles Liters of gas is 3.21 x 1024 molecules of carbon monoxide.

1 mole contains 6.02×[tex]10^{23}[/tex]

X×6.02×[tex]10^{23}[/tex] = 3.21×[tex]10^{23}[/tex]

X= 3.21×/6.02×[tex]10^{23}[/tex] = 0.533×10= 5.33 moles

A molecule is a collection of two or greater atoms held together by attractive forces called chemical bonds; relying on context, the term can also or might not consist of ions that fulfill this criterion.

A molecule may be homonuclear, this is, it includes atoms of one chemical element, e.g. atoms inside the oxygen molecule (O2); or it may be heteronuclear, a chemical compound composed of a couple of detail, e.g. water ( hydrogen atoms and one oxygen atom; H2O). within the kinetic theory of gases, the time period molecule is frequently used for any gaseous particle no matter its composition. This relaxes the requirement that a molecule includes extra atoms because the noble gases are character atoms.

To learn more about Molecules visit here:

https://brainly.com/question/19922822

#SPJ4

The probability that the color blue will be chosen is 2/8 or 1/4, since there are 8 colors remaining after 9 have been ruled out and 2 of those are blue.

Because 9 colors have been eliminated, there are now 17 - 9 = 8 colors remaining. Because two of the eight hues are blue, the chance of selecting blue is 2/8, which simplifies to 1/4.

Another way to look at it is that there are 17 different colors to pick from, and two of them are blue, so the likelihood of selecting blue if all colors were available is 2/17. But, because 9 colors have been ruled out, the probability must be recalculated using the new total of 8, yielding a probability of 1/4.

Learn more about probability brainly.com/question/24756209

#SPJ1