Answers
Answer:
I do not really no sorry
Explanation:
:))
Related Questions
High exposure to mercury is indicated by a blood level above 10 mg/L. How many mercury atoms are in a liter of blood that contains 10 mg mercury?
Answers
Answer:
3.0x10¹⁹ atoms
Explanation:
First we convert 10 mg of mercury into grams:
10 mg / 1000 = 0.01 gThen we convert 0.01 g of mercury into moles, using its molar mass:
0.01 g ÷ 200.59 g/mol = 4.99x10⁻⁵ molThen we convert moles into number of atoms, using Avogadro's number:
4.99x10⁻⁵ mol * 6.023x10²³ atoms/mol = 3.0x10¹⁹ atoms.
Characteristics of a Group of Elements
Do not conduct electricity
• Mostly gas, but brittle when solid
Has 7 valence electrons
.
Which of these elements is in this groun?
Answers
Answer:
Gas
Explanation:
I dunno but a lucky guess i guess
The theoretical yield of a reaction is 44 g. The actual yield was 34 g. What is the percent
yield?
Answers
Answer:
77%
Explanation:
percent yield is the actual yield divided by the theoretical (predicted) yield, then multiplied by 100 to get a percentage.
34/44 = 0.77
0.77 x 100 = 77%
Directions: Show all of your work for each of the following problems.
3. What is the % Ba in Ba(NO3)2?
4. What is the % of each element in Ni3(PO4)2?
5. What is the % of each element in Al2(CrO4)3?
6. What is the % of each element in (NH4)2(SO4)?
Answers
Answer:
3.Ba=24.Ni=2...PO4=35.Al=3...CrO4=26.NH4=1...SO4=2HELP WITH THIS ASAP PLEASE!!! What is the mass in grams of 8.42 x 10^22 atoms of sulfur?
Answers
Answer:
Answer:
see explanation and punch in the numbers yourself ( will be better for your test)
Explanation:
If you are given atoms you need to divide by Avogadro's number 6.022x10^23
then you will have moles of sulfur-- once you have moles multiply by the molar mass of sulfur to go from moles to grams
mm of sulfur is 32 g/mol
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 15.6 is the mass in gram of 8.42 x 10²² atoms of sulfur.
What is mole?
The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity of amount of substance. It measure the number of elementary entities of a given substance that are present in a given sample. There are so many formula for calculating mole.
we know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number
mole of sulfur =given number of atoms of sulfur ÷ 6.022×10²³(Avogadro number)
given number of atoms of sulfur= 8.42 x 10²²
Substituting the values
mole of sulfur=8.42 x 10²²÷ 6.022×10²³
mole of sulfur = 0.49moles of sulfur
mass of sulfur= moles of sulfur× Molar mass of sulfur
mass of sulfur=15.6gram
Therefore, 15.6 is the mass in gram of 8.42 x 10²² atoms of sulfur.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
How many grams of hydrogen (H2) are needed to react with 92.00 grams of nitrogen (N2)?
Answers
N_2 + 3H_2 -> NH_3
So now we know that for every one mole of N2, we need 3 moles of H2.
There are (92g)/(28g/mol)= 3.3 mol N2
So we need 9.9 mol H2
This is going to be about 20 grams if i am correct
Antacid has a pH of 11. What does that tell you about its concentration of hydrogen ions? What does that tell you about its concentration of hydroxide ions?
Answers
Answer: The concentration of hydrogen ions is [tex]10^{-11}M[/tex] and the concentration of hydroxide ions is [tex]10^{-3}M[/tex]. Thus the concentration of hydroxide ions is more than the concentration of hydrogen ions.
Explanation:
pH or pOH is the measure of acidity or alkalinity of a solution.
pH is calculated by taking negative logarithm of hydrogen ion concentration.
[tex]pH=-\log [H^+][/tex]
[tex]pOH=-\log[OH^-][/tex]
Putting in the values:
[tex]11=-\log[H^+][/tex]
[tex][H^+]=10^{-11}M[/tex]
[tex]pH+pOH=14[/tex]
[tex]pOH=14-11=3[/tex]
[tex]3=-log[OH^-][/tex]
[tex][OH^-]=10^{-3}M[/tex]
Thus the concentration of hydroxide ions is more than the concentration of hydrogen ions.
What animal did this person tes
on to see if the air was pure
nitrogen?
Answers
Answer:
DONT CLICK THAT LINK THAT'S A SCAM AND A VIRUS PLEASE LISTEN
Explanation:
The water cycle describes the continuous movement of water on earth. Which part of the water cycle is directly responsible for returning water to the soil
Answers
Answer:
mmmh..
Explanation:
sorryy id really ñike to help but i just dont know it...
different between methane and ethane.
Answers
Most particles would travel____from their source to a screen that lit up
when struck.
Answers
Answer: in a straight path!
Explanation: hope this helps
o
Plants rely heavily on _______
in the nitrogen cycle to incorporate nitrogen into organic come pounds
1 oxygen
2 viruses
3 bacteria
4 fungi
Answers
Answer:
3. Bacteria
Explanation:
If you don't trust me, search it up!
Can someone tell me if these are right? I am supposed to be decoding this for my escape room but it seems to be wrong.
Answers
Answer:
Q1 is A.
Q2 is right
Q3 is D.....I dont
really know about this one
Q4 is right
1. 2.00 L of gas is at 740 mm Hg. What is its volume at standard
pressure?
Answers
0.16
Explanation:
when you divided 1.2.00 with 740 you get this number.
Sorry for spamming but this is due tomorrow! Can someone help me please!!
Answers
Answer:
1. in the Northern Hemisphere the vernal equinox falls about March 20 or 21, as the Sun crosses the celestial equator going north. In the Southern Hemisphere the equinox occurs on September 22 or 23, when the Sun moves south across the celestial equator.
Explanation:
Hope this helps ^^
Oxycodone (C18H21NO4), a narcotic analgesic, is a weak base with pKb = 5.47. Calculate the pH of a .00500 M oxycodone solution.
Answers
Answer:
pH = 10.11
Explanation:
Hello there!
In this case, since it is possible to realize that this base is able to acquire one hydrogen atom from the water:
[tex]C_{18}H_{21}NO_4+H_2O\rightleftharpoons C_{18}H_{21}NO_4H^+OH^-[/tex]
We can therefore set up the corresponding equilibrium expression:
[tex]Kb=\frac{[C_{18}H_{21}NO_4H^+][OH^-]}{[C_{18}H_{21}NO_4]}[/tex]
Which can be written in terms of the reaction extent, [tex]x[/tex]:
[tex]Kb=\frac{x^2}{0.00500M-x}=3.39x10^{-6}[/tex]
Thus, by solving for [tex]x[/tex] we obtain:
[tex]x_1=-0.000132M\\\\x_2=0.0001285M[/tex]
However, since negative solutions are now allowed, we infer the correct [tex]x[/tex] is 0.0001285 M; thus, the pOH can be computed:
[tex]pOH=-log(x)=-log(0.0001285)=3.89[/tex]
And finally the pH:
[tex]pH=14-pOH=14-3.89\\\\pH=10.11[/tex]
Best regards!
Please help will mark brainliest!! What is the main point of paragraph 3?
Answers
Answer:
the highest frequency
Explanation:
If you have 12 atoms of hydrogen before a chemical reaction, how many atoms of hydrogen will be present
Answers
Answer:
12 atoms of hydrogen will be present in the product
Explanation:
12 atoms of hydrogen will be present in the product because the law of conservation of mass states that mass is neither created nor destroyed in chemical reactions.
The law of conservation states that the mass of the element remains the same during the course of the reaction.
The law of reaction conformed by the following:-
Mass of reactant Mass of productAccording to the question, the amount of hydrogen is 12 atoms in the reactant and the amount will remain the same at the end of the reaction, which is a product that is 12 atoms
Hence, the amount remains the same in the reaction that is 12 atoms
For more information, refer to the link:-
brainly.com/question/2817451
When naming an acid, which of the following is true?
chlorite changes to chloric acid
chlorate changes to chloric acid
none of these is true
chlorate changes to chlorous acid
Answers
Answer:
chlorate changes to chlorous acid
What is the mass of water released by the heating? Show your work or explain your reasoning.
Answers
Answer:
Dividing the mass of the water lost by the original mass of hydrate used is equal to the fraction of water in the compound. Multiplying this fraction by 100 gives the percent water in the hydrate.
Explanation:
The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
What is mass ?The proportion of matter that makes up an object is quantified by its mass. The kilogram, or kg, would be the fundamental SI unit of mass.
What is hydrate?Any substance that contains water through the form of H2O molecules is referred to as a hydrate. This water content by weight can vary, but it is typically fixed. The most well-known hydrates seem to be crystalline solids which decompose once the attached water is removed.
Therefore , The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
To know more about mass and hydrate.
https://brainly.com/question/11202174
#SPJ3
What is the main function of the part labeled Yin the model?
Answers
Answer:
The part labelled Y is the chloroplast and its main function is to produce food for the plant in the reactions of photosynthesis.
Explanation:
Plants are autotrophic organisms in that they are able to manufacture their own food. Plants are able to manufacture their own food due to the presence of the cell organelle known as the chloroplast. The plant chloroplast has its own DNA and can reproduce independently, from the rest of the cell. They can as well produce amino acids and lipids required for the chloroplast membrane.
Chloroplasts are green-colored membrane-bound organelles found within the plant cell. Their green color is due to the presence of the pigment, chlorophyll. Chlorophyll in the chloroplasts are responsible for absorbing light energy from sunlight and using this absorbed energy to make simple sugars (carbohydrates) from carbon (iv) oxide and water. This is the main function of the chloroplasts in plant cells.
Photosynthesis occurs in the chloroplasts in two reaction steps:
1. The light reaction - involves the splitting of e=water molecules using the energy of sunlight
2. The dark reactions - carbon (iv) oxide from the air is used to produce sugars.
If you are given 608 grams of calcium phosphate Ca3(PO4)2, how many moles would you have? *
Answers
Answer:
You would have 1.96 moles.
Explanation:
You are given 608 grams of calcium phosphate Ca₃(PO₄)₂.
Molar mass (M) is the amount of mass that a substance contains in one mole. This substance can be an element or a compound.
Since the molar mass of the compound Ca₃(PO₄)₂ is 310 g / mole, and taking into account the definition of molar mass, you can apply the following rule of three: if 310 grams of Ca₃(PO₄)₂ are contained in 1 mole, 608 grams of the compound in how many moles are present?
[tex]moles=\frac{608 grams* 1 mole}{310 grams}[/tex]
moles= 1.96
You would have 1.96 moles.
What volume of Nitrogen measured at s.T.P. Will be produced on heating 33.8g of calcium trioxonitrate
Answers
Answer:
9.2288 L
Explanation:
The equation of the reaction is given as;
2 Ca(NO3)2 → 2 CaO + 4 NO2 + O2
From the reaction;
2 mol of Ca(NO3)2 produces 4 mol of NO2
Converting 33.8g to Number of moles;
Number of moles = Mass / Molar mass
Number of moles = 33.8 g / 164.088 g/mol
Number of moles = 0.206 mol
2 = 4
0.206 = x
Solving for x;
x = 0.206 * 4 / 2
x = 0.412 mol
At STP;
1 mol = 22.4 L
0.412 mol = x
Solving for x;
x = 0.412 * 22.4 = 9.2288 L
Scientists are trying to control the Maillard reaction by?
Answers
Answer:
Intervention of Maillard reactions by the addition of natural and synthetic chemical compounds has previously been directed toward removing one of the reactants (the amino groups or the reducing sugars) or adding sulfur-containing compounds, such as sulfur dioxide or N-acetyl cysteine, which inhibit the reactions
Explanation:
What vale is represented by the symbol Mr
Answers
the answer for this question is Mister
6) 3.2 grams of sodium chloride is dissolved to make 0.25 liters of solution. Hint Convert grams to moles first! Molar mass of NaCl is 58.5 g/mol
Answers
Which solution is the least concentrated?
O 2 moles of solute dissolved in 4 liters of solution
How many moles are there in 2 grams of Aluminum?
Answers
Answer:
Number of moles: 0.07407407407
Which element is the excess reagent when 3.00 moles of Mg is ignited in 2.20 moles of pure oxygen
in the reaction below?
2Mg + O2 -> 2MgO
Answers
Answer:
Oxygen is in excess.
Explanation:
The coefficients of the balanced equation create a mole ratio that shows the ratio of how many reactants are used up and products are created.
The mole ratio of Mg to O2 in this equation is 2:1, which means that for every two moles of Mg used, there will be 1 mole of O2 used.
If we have 3.00 moles of Mg, we will only need 1.5 moles of oxygen to completely burn the Mg. Therefore, when all 3.00 moles of Mg are used, there will still be some of the 2.20 moles of oxygen remaining.
Oxygen is in excess reagent when 3.00 moles of Mg are ignited in 2.20 moles of pure oxygen.
The coefficients of the balanced equation create a mole ratio that shows the ratio of how many reactants are used up and products are created. The mole ratio of Mg to O2 in this equation is 2:1, which means that for every two moles of Mg used, there will be 1 mole of O2 used.If we have 3.00 moles of Mg, we will only need 1.5 moles of oxygen to completely burn the Mg. Therefore, when all 3.00 moles of Mg are used, there will still be some of the 2.20 moles of oxygen remaining.Learn more about Oxygen
https://brainly.com/question/2207019
#SPJ2
What effect does pollution have on condensation? A There are more particles in the air for water vapor to cluster around. B Areas with more pollution have more clouds and rain. C Pollution creates more ground level clouds. D It is harder for the sun to warm up the water vapor.
Answers
Answer:
A There are more particles in the air for water vapor to cluster around.
Explanation:
As the condensation process takes place more particles are added to the atmosphere for water vapour and condensation further leads to the build-up of clouds. If the sky is polluted with pollutants the condensation can raise the level of pollution by blocking the rays of the sun from reaching the ground. This affects the visibility of most of the cities.in what two ways do minerals form
Answers
Answer:
Minerals can form in three primary ways being precipitation, crystallization from a magma and solid- state transformation by chemical reactions (metamorphism). Mineral Precipitation is when a mineral is formed by crystallization from a solution. Examples include quartz, halite (table salt), calcite, and gypsum.
Answer:
When magma cools slowly, deep below the surface, it has time to form large crystals in regular patterns. The second way that minerals form is through solutions. (A solution is when one substance is dissolved uniformly in a liquid.) When elements and compounds leave the solution, they can crystalize.