For the reaction C + 2H₂ → CH4, how many grams of carbon are required to produce 12.6 moles of
methane, CH4 ?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer
as 4.0

Answer:

Explanation:

The value you measured on the scale in ounces = X

28.3 grames = 1oz

1/4of grames= 1/28.3 *1/4

                You have to compare as below;

 if you want to convert the measured scale to grames ; multiply by 28.3

if you want to convert measured to oz ; you have to (1/28.3 *1/4) *X/4

Jim say that he is not including in the location of Treasure Island because 'it is too dangerous of a place'.

What do you mean by Treasure Island?

Treasure Island is an adventure novel by Scottish author Robert Louis Stevenson, first published in 1883. It is the story of young Jim Hawkins and his quest to find buried treasure on a tropical island. The novel is considered to be a classic of children's literature and is one of the most frequently dramatized of all novels.

Treasure Island is a fictional island that is filled with danger and adventure. Jim knows that venturing to this island would be a risky endeavor, so he has decided to stay away. He believes that it is too dangerous of a place to be included in his travels.

Hence, option C is correct.

To know more about the Treasure Island,

https://brainly.com/question/14461636

#SPJ1

Answer: c) 0.185mol

Explanation:

First you need to create a balanced equation.

Al + O2 ---> Al2O3        (this is currently unbalanced)

When balanced, it is:

4Al + 3O2 ---> 2Al2O3

Then you need to find the limiting reactant (the way I do this is by taking both of them, doing dimensional analysis, and seeing which makes a smaller amount of product)

For Al:

10.0g Al * (1mol Al / 26.98g Al) * (2mol Al2O3 / 4mol Al) = 0.185mol Al2O3

For O2:

19.0g O2 * (1mol O2 / 32.00g O2) * (2mol Al2O3 / 3mol O2) = 0.396mol Al2O3

Since the amount of Al2O3 produced is smaller when using 10.0g Al, this is the limiting reactant and therefore the answer is 0.185mol Al2O3.

The standard reduction potentials for copper, chromium and nickel ions.

Ions are atoms or molecules that have an abnormally high proton content compared to their electron content, producing a net electric charge. Ions can have either a positive charge (referred to as cations) or a negative charge (called anions). Ions can arise when electrons are gained or lost.

(a) Cr3+, Ni2+, and Cu2+ are the three reducing agents with the strongest effects. This is due to the fact that Cr3standard +'s reduction potential is lower (-0.74 V) than Ni2 +'s, which is lower (-0.25 V), which is lower (-0.34 V), and so on. Stronger reducing agents are required for higher adverse reduction potentials.

(b)The standard reduction potential of Cr (s) is -0.74 V, which is more negative than that of Cu2+ (+0.34 V), and this explains why the reaction is spontaneous under standard conditions. As a result, an unplanned reaction will take place when electrons move from the Cr (s) to the Cu2+ (aq) ion.

(c) The concentration of the fluid at the cathode would drop after the cell had been discharged continually. This is because the reduction of Cu2+ (aq) to Cu (s) at the cathode would result from electrons flowing from the anode to the cathode. The reaction would become less spontaneous as the concentration of Cu2+ (aq) near the cathode dropped, eventually stopping the process.

To know more about ions, visit:

https://brainly.com/question/1488567

#SPJ1

The species in water are the Mg^2+ and SO4^2-

Ionic substances dissolve in water because of the attraction between the positive and negative charges of the ions and the polar water molecules. The ions are surrounded by water molecules through a process known as solvation, which causes the ionic substance to break apart into individual ions.

The positive and negative charges of the ions are attracted to the opposite charges on the water molecules, which allows the ions to be dispersed evenly throughout the water. This makes the substance appear to have dissolved, even though the individual ions are still present in the solution.

Learn more about ions:https://brainly.com/question/14982375?

#SPJ1

Here's a matching of the subatomic particles described in each statement:

____ possesses a positive charge ---> Proton

____ has no charge ---> Neutron

____ has a mass slightly less than that of a neutron ---> Electron

____ has a charge equal to but opposite in sign to that of an electron ---> Electron

____ is not found in the nucleus ---> Electron

____ has a positive charge ---> Proton

____ can be called a nucleon ---> Proton and Neutron

____ is the heaviest of the three subatomic particles ---> Neutron

____ has a relative mass of 1836 if the mass of an electron is 1 ---> Proton

____ has a relative mass of 1839 if the mass of an electron is 1 ---> Neutron

Learn more about proton, electron, neutron here: https://brainly.com/question/13131235

#SPJ4

Order zero. Concentration data is commonly monitored during a reaction to determine the order with respect to a reactant. Consider the types of observations listed.

Observations are the data collected through direct or indirect means. It is the process of gathering information by watching, listening, and measuring in order to gain knowledge and understanding. Observations can be qualitative, meaning they involve descriptions and subjective information, or quantitative, meaning they involve measurements and objective information. Examples of observational data include surveys, interviews, audio recordings, video recordings, and physical measurements. Observations are used to learn more about the world around us and to make informed decisions.

To learn more about observations

https://brainly.com/question/15157110

#SPJ4

Sodium chloride can be formed by the reaction of sodium metal and chlorine gas. if 45.98 g of sodium combines with an excess of chlorine gas to form 116.89 g of sodium chloride, the mass of chlorine gas is 70.9g.

Sodium chloride, also known as salt (though sea salt contains additional chemical salts), would be an ionic substance with the chemical formula NaCl, which represents a 1:1 ratio of chloride and sodium ions.

The salt chiefly responsible for the saltiness of seawater and the osmotic pressure of several multicellular organisms is sodium chloride. Salt is extensively utilized as a condiment as well as food preservative in its edible form.

According to law of conservation of mass

Na + 1/2 Cl[tex]_2[/tex] → NaCl

mass of Na + mass of chlorine gas= mass of sodium chloride

45.98+ mass of chlorine gas = 116.89

mass of chlorine gas =116.89-45.98=70.9g

Therefore, the mass of chlorine gas is 70.9g.

To learn more about sodium chloride, here:

https://brainly.com/question/18069204

#SPJ1

The compound with the higher boiling point in this pair is GeF₄. The boiling point of GeF4 is 128 °C, whereas the boiling point of GeCl₄ is only -40.6 °C.

This is due to the larger size of the GeF₄ molecule, which results in stronger London dispersion forces between molecules, increasing the boiling point.

London dispersion forces are extremely weak attractive forces between atoms or molecules caused by the electrostatic attraction between temporary induced dipoles. They arise due to the uneven distribution of electrons within an atom or molecule, which causes one end of the atom or molecule to become slightly positively charged and the other end to become slightly negatively charged.

These charges attract each other, resulting in a temporary attractive force between the two atoms or molecules. London dispersion forces are the weakest of the intermolecular forces, but they are still important in determining the properties of substances.

Learn more about the boiling point:

https://brainly.com/question/40140

#SPJ4

The ground state electron configuration of a neutral silver atom is [Kr] 5s1 4d10 instead of [Kr] 5s2 4d9.

This observation can be explained (theoretically) by the fact that an enhanced stability is associated with filled sets of equivalent Orbitals.

Electron configuration is the way the electrons are arranged in an atom. The way to determine the electron configuration is divided into two, namely based on the number of electrons in each shell (K, L, M, N method) for groups IA-VIIIA.

Then, the electron configuration is based on the number of electrons in the subshell (s, p, d, f way). To be able to write it, there are several rules set in writing electron configurations.

Learn more about Electron Configuration at

https://brainly.com/question/26084288

#SPJ4

1. The ears feel pressure below water because of the pressure of the water above and the atmospheric pressure.

2. The purpose of this pressurization is to ensure that the pressure in the ear and that of the outside atmosphere are equal.

3. What happens to the gas in your spacecraft and in your body at each of these times is as follows:

A. prior to takeoff, inside the rocket, wearing your space suit, the air pressure is the same

B. The air pressure is greater

C. The air pressure is less

The force that air, whether compressed or unconfined, applies to whatever surface it comes into touch with is known as air pressure.

Air pressure is also known as atmospheric pressure and varies based on altitude.

Learn more about air pressure at: https://brainly.com/question/12870338

#SPJ1

One mole of the compound Al₂ (SO₄)₃ contains 2 moles of Al, 3 moles of sulphur atoms and 6 moles of O₂ gas.

Aluminum sulphate is an ionic compound formed by the donation of electrons from the Al metal to the sulphate group. In the sulphate group, the oxygen and sulphur are covalently bonded.

The reaction of the formation of aluminum sulphate can be written as follows:

[tex]\rm 2Al + 3 SO_{4} \rightarrow Al_{2}(SO_{4})_{3}[/tex]

Here, one mole of this compound is formed by 2 moles of Al and 3 moles of sulphate group. 3 moles of sulphate group contains 3 moles of S and 6 moles of O₂.

Then, 6 moles of Al₂ (SO₄)₃ contains 12 moles of Al, 18 moles of  S and 36 moles of oxygen gas.

Find more on Al₂ (SO₄)₃:

https://brainly.com/question/15569711

#SPJ1

Samples of NaF(s) and NH₄Cl(s) are dissolved in separate beakers that each contain 100 ml of water. The equation that best represents the formation of the slightly acidic solution will be option c.

NH⁴⁺(aq) + H₂O(l) --- NH₃(aq) + H₃O(aq)

The NH4Cl salt forms a slightly acidic solution as it generates hydronium ions when dissolved in water. The NaF salt does not generate hydronium ions when dissolved in water, so it forms a neutral solution. Substitute with "Sodium fluoride is an inorganic salt of fluoride carrying molecular formula NaF." Sodium fluoride solutions are utilized with hard water-insoluble mixtures of calcium and magnesium fluoride can constitute. It is a dry chemical utilized in the fluoridation of drinking water, it should be manually cogitated and summed up in the mixing tank. NH₄Cl is an inorganic compound with the chemical term Ammonium chloride.

To learn more about an acidic solution visit here:

https://brainly.com/question/10682683

#SPJ4

In the lewis diagram of N₂O molecule, a triple bond is formed between the nitrogen atoms, which means,  in the Lewis diagram the nitrogen atoms are connected with three lines.

The Lewis diagram is used to represent the way in which two or more atoms are bonded to each other. This is possible by using lines to represent bonds and dots to represent the electrons.

In the case of the molecule N₂O bonding occurs in such a way that the oxygen atom is connected  to one of nitrogen atoms. The nitrogen atom that is not connected to the oxygen will have 2 electrons which is represented by dots as the number of valence electrons is 5, but in case of triple bond three are used.

The oxygen atom  has 6 electrons represented by dots, which is equal to the number of valence electrons.

Considering the formal charges, the lewis structure in which the electronegative oxygen atom (O) contains a negative charge and the electropositive nitrogen atom (N) contains a positive charge represents bonding in the N₂O molecule.

To know more about lewis diagrams here

https://brainly.com/question/29573072

#SPJ4

Answer:

True

Explanation:

True because Hazmat labels are used to communicate information necessary to protect human health and the environment. They are used to identify the presence of hazardous materials, and provide information about the risks associated with these materials.

The solid lines on a topographic map typically represent contour lines, which are used to show the changes in elevation of the land surface.

A topographic map is used to represent the three-dimensional features of the terrain on a two-dimensional surface. The topographic map shows the location, shape, and elevation of natural and man-made features on the earth's surface, such as hills, valleys, rivers, lakes, roads, buildings, and contour lines.

These lines connect points of equal elevation and show the shape and slope of the terrain. They can be used to visualize the topography of an area and can be useful for navigation, planning hikes, and other outdoor activities.

Find out more on topographic map here: https://brainly.com/question/181146

#SPJ1

he correct answer is (C) M and S, which are the ions that remain in solution after the reaction has gone to completion.

When 20.0 mL of a 1.0 M solution of M2R3 and 50.0 mL of a 1.0 M solution of TS2 are mixed, a reaction occurs, producing two precipitates, MS3 and TR. The precipitates are solid compounds that are no longer in solution, so they are not included in the ions that remain in solution.

Based on the balanced chemical equation, the reactants in solution are M2R3 and TS2, which means that the ions that remain in solution are M and S (option C). The reaction consumes the R and T ions, causing them to combine with the M and S ions to form the solid precipitates.

Therefore, the correct answer is (C) M and S, which are the ions that remain in solution after the reaction has gone to completion.

Learn more about ions:

brainly.com/question/14982375

#SPJ4

Intracellular fluid (ICF) is the fluid that exists within the cells of the body and makes up about two-thirds of the body’s water. It is composed primarily of water, electrolytes, and proteins and is separated from the extracellular fluid (ECF) by the cell membrane.

ECF is the fluid that exists outside of the cells and makes up about one-third of the body’s water. It is composed primarily of water, electrolytes, and proteins and is separated from the ICF by the cell membrane.

The chemical composition of the ICF and ECF differ slightly due to the presence of different ions, proteins, and glucose concentrations. The ICF has a higher concentration of potassium and other inorganic ions, while the ECF has a higher concentration of sodium and other organic ions.

The ICF also has a higher concentration of proteins, while the ECF has a higher concentration of glucose. In terms of location, the ICF is found inside the cell and the ECF is found outside the cell.

To learn more about fluid visit:

https://brainly.com/question/18482199

#SPJ4

All four compounds are isomers of 4-isopropylheptane, and each isomer has its own unique properties, such as boiling point, melting point, solubility, and other physical properties.

The names of the isomers of 4-isopropylheptane are 3,4-diethylhexane, 4-(methylethyl)heptane, 2,2,3-trimethyloctane, and 2-methylnonane. 3,4-diethylhexane and 4-(methylethyl)heptane are structural isomers, which means that the molecules have different structural formulas and connectivities. 3,4-diethylhexane has two ethyl groups attached to the fourth carbon, while 4-(methylethyl)heptane has one methyl and one ethyl group attached to the fourth carbon. 2,2,3-trimethyloctane and 2-methylnonane are both positional isomers, meaning that the molecules have the same structural formula but the groups attached to the carbon chain are arranged differently. 2,2,3-trimethyloctane has three methyl groups attached to the second, third, and fourth carbons, while 2-methylnonane has two methyl groups attached to the second and ninth carbons.

Learn more about 4-isopropylheptane here:

https://brainly.com/question/30333697

#SPJ4

Answer:

Balanced equation:  2Fe(OH)₃ → Fe₂O₃ + 3H₂O

a)  2.39 g

b)  1.78 g

Explanation:

Given unbalanced chemical equation:

Fe(OH)₃ → Fe₂O₃ + H₂O

To balance a chemical equation, we need to make sure that there are the same number of atoms of each element on both sides of the equation. We can do this by adding coefficients in front of a chemical symbol or formula where needed.

Therefore, the balanced equation is:

[tex]\large\boxed{\sf 2Fe(OH)_3 \rightarrow Fe_2O_3 + 3H_2O}[/tex]

[tex]\hrulefill[/tex]

Given that 0.75 L of water vapor (H₂O) is produced at STP (Standard Temperature and Pressure), which is 273.15 K and 1 atm, we can calculate the number of moles of water vapor produced using the ideal gas law:

[tex]\large\boxed{PV = nRT}[/tex]

where:

Solving for n:

[tex]\begin{aligned}n &= \dfrac{PV}{RT}\\\\n&= \dfrac{1 \cdot 0.75}{0.082\cdot 273.15}\\\\n&\approx 0.0334846841 \;\rm mol\end{aligned}[/tex]

Therefore, the number of moles of water vapor produced is 0.0335 moles (3 s.f.).

Using the stoichiometric coefficients from the balanced equation, we can relate the moles of water vapor produced to the moles of iron (III) hydroxide (Fe(OH)₃) used.

From the balanced equation, 2 moles of Fe(OH)₃ produce 3 moles of H₂O. Therefore, the number of moles of Fe(OH)₃ is:

[tex]\phantom{w.}\rm 0.0334846841\; moles\;of\;H_2O \times \dfrac{2 \text{ moles of } Fe(OH)_3}{3 \text{ moles of } H_2O}\\\\ \approx 0.0223231227 \text{ moles of } Fe(OH)_3[/tex]

Now, calculate the molar mass of Fe(OH)₃:

[tex]\phantom{w.}\rm Molar\; mass\; of\; Fe(OH)_3\\\\=\rm (1 \times Atomic\; mass \;of\; Fe) + (3 \times Atomic\; mass\; of\; O) + (3 \times Atomic \;mass\; of \;H)\\\\\rm \approx (1 \times 55.845\;g/mol) + (3 \times 15.999\; g/mol) + (3 \times 1.008\;g/mol)\\\\\rm \approx 106.866\; g/mol[/tex]

Finally, calculate the mass of Fe(OH)₃ by multiplying the number of moles by the molar mass:

[tex]\begin{aligned}\rm Mass\; of\; Fe(OH)_3 &= \rm 0.0223231227 \; mol \times 106.866\; g/mol\\&= \rm 2.38558283\; g\\&\approx \rm 2.39\;g\;(3\;s.f.)\end{aligned}[/tex]

Therefore, approximately 2.39 grams of iron (III) hydroxide were used.

[tex]\hrulefill[/tex]

From the balanced equation, 2 moles of Fe(OH)₃ produce 1 mole of Fe₂O₃. Therefore, the moles of Fe₂O₃ produced is:

[tex]\phantom{w.}0.0223231227 \text{ moles of } \rm Fe(OH)_3 \times \dfrac{1 \text{ mole of } Fe_2O_3}{2 \text{ moles of } Fe(OH)_3}\\\\ \approx 0.0111615614\text{ moles of } Fe_2O_3[/tex]

Now, calculate the molar mass of Fe₂O₃:

[tex]\phantom{w.}\rm Molar\; mass\; of\; Fe_2O_3\\\\=\rm (2 \times Atomic\; mass \;of\; Fe) + (3 \times Atomic\; mass\; of\; O) \\\\\rm \approx (2 \times 55.845\;g/mol) + (3 \times 15.999\; g/mol) \\\\\rm \approx 159.687\; g/mol[/tex]

Finally, calculate the mass of Fe₂O₃ by multiplying the number of moles by the molar mass:

[tex]\begin{aligned}\rm Mass\; of\; Fe_2O_3&= \rm 0.0111615614 \; mol \times 159.687\; g/mol\\&= \rm 1.78235625\; g\\&\approx \rm 1.78\;g\;(3\;s.f.)\end{aligned}[/tex]

Therefore, approximately 1.78 grams of iron (III) oxide were used.

9.7 g of C₁₂H₂₆ would have to be reacted to generate enough heat to raise the temperature of 750 g of liquid water from 10°C to 90°C.

To calculate the amount of heat required to raise the temperature of water, we can use the specific heat capacity of water, which is 4.184 J/g°C.

The amount of heat required to raise the temperature of 750 g of water from 10°C to 90°C is given by the following equation:

Q = mcΔT

where m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.

Q = 750 g × 4.184 J/g°C × (90°C - 10°C) = 28,665 J

We need to determine the amount of heat produced by the reaction of C₁₂H₂₆ with oxygen to form CO₂ and H₂O. We can use the following equation:

C₁₂H₂₆ + 19/2 O₂ → 12 CO₂ + 13 H₂O

The standard enthalpy change of combustion (ΔH°c) for C₁₂H₂₆ is -50,540 kJ/mol. We can use this value to calculate the amount of heat generated per mole of C₁₂H₂₆.

Q = ΔH°c × n = -50,540 kJ/mol × n

where n is the number of moles of C₁₂H₂₆ reacted.

Finally, we can calculate the number of moles of C₁₂H₂₆ required to generate the desired amount of heat by dividing the total heat required by the heat generated per mole of C₁₂H₂₆:

n = Q / ΔH°c = 28,665 J / (-50,540 kJ/mol) = 0.0568 mol

And finally, we can convert moles to grams using the molar mass of  C₁₂H₂₆, which is approximately 170.3 g/mol:

m = n × M = 0.0568 mol × 170.3 g/mol = 9.7 g

To know more about specific heat capacity here

https://brainly.com/question/29766819

#SPJ4

The boiling point of a compound is determined by the strength of the intermolecular forces between its constituent molecules. Stronger intermolecular forces result in a higher boiling point.

The boiling point information for each of the compounds:

SiF₄ has a boiling point of -90.1°C.

GeF₄ has a boiling point of -67.2°C.

Geld has a boiling point of 63.6°C.

CCl₄ has a boiling point of 77.7°C.

CO has a boiling point of -191.5°C.

CI₂ has a boiling point of -39.8°C.

Learn more about boiling point here: https://brainly.com/question/24168079

#SPJ4

Vapor pressure of X is lower than Y at 20°C, therefore heat of vaporization pf X is greater than Y.

Vapour pressure is a measure of a material's tendency to change into a gaseous or vapour state, and it rises with temperature.

The boiling point of a liquid is the temperature at which the vapour pressure at its surface equals the pressure exerted by its surroundings.

Heat of vaporization ∝ 1 ÷ Vapour pressure

But at 60°C vapour pressure of X is greater than Y.

Thus, at this temperature heat of vaporization pf Y is greater than X

To learn more about the vapor pressure, follow the link;

https://brainly.com/question/11864750

#SPJ1

5 H₂O(l) + CuSO₄(s) → CuSO₄.5 H₂O(s) is the chemical equation which describes as an enthalpy change of formation.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

Learn more about chemical equation,here:

https://brainly.com/question/25858221

#SPJ1

The molecular formula of compound S, C₇H₁₄O₂, suggests that it is a secondary alcohol or an aldehyde.

The compound "C₇H₁₄O₂" is a molecular formula which represents the chemical structure of an organic compound containing 7 Carbon atoms, 14 Hydrogen atoms and 2 Oxygen atoms. The H NMR data is consistent with a secondary alcohol, as the doublet at 0.93 ppm and the doublet at 3.86 ppm correspond to the CH3 groups and the multiplet at 1.91 ppm corresponds to the OH proton.

The triplet at 1.15 ppm corresponds to the CH₂ group and the quartet at 2.33 ppm corresponds to the CH group. Based on these spectral data, it is likely that compound S is a secondary alcohol with the molecular formula C₇H₁₄O₂.

Learn more on compound structures here: https://brainly.com/question/28161072

#SPJ1

Answer:

A sharp knife cut objects better because due to its very thin edge, the force of our hand falls over a very small area of the object producing a large pressure and this large pressure cuts the object easily.

The best synthesis of (R)-3-chloro-2,3-dimethylhexane from (R)-2,3-dimethylhexan-3-ol would be using PCl3.

PCl3 is a commonly used reagent for chlorination reactions, and it can efficiently convert alcohol into the corresponding alkyl chloride.

What does PCl3 do in a reaction?

Phosphorus trichloride (phosphorus chloride, PCl3) is a colorless fuming liquid that reacts violently with water to liberate phosphoric acid and hydrogen chloride (HCL) gas. PCl3 is a strong oxidizer and will readily react with many organic compounds.

What is PCl3 used for?

Phosphorus Trichloride is a colorless, clear, fuming liquid with a strong odor. It is used in gasoline additives and textile finishing, and to make other chemicals, pesticides, dyestuffs, catalysts, and plasticizers.

Is PCl3 oxidizing or reducing agent?

PCl(3) can act as an oxidizing as well as a reducing agent

To know more about chlorination reactions:

https://brainly.com/question/24103636

#SPJ4

A compound is a pure substance composed of two or more different elements chemically combined in a fixed ratio. If something is a compound, it is also a pure substance.

A compound is a type of pure substance, meaning it has a consistent and uniform composition throughout. It is different from a mixture, which is a combination of two or more substances that are not chemically combined and can be separated by physical means.

Unlike a mixture, a compound has a fixed composition, meaning the ratio of its constituent elements cannot be changed by simple physical methods such as filtration or evaporation.

Compounds are formed when two or more elements chemically react and form bonds, resulting in a new substance with unique properties. An element, on the other hand, is a pure substance that cannot be broken down into simpler substances by chemical means.

To learn more about compound visit: https://brainly.com/question/14782984

#SPJ4

Your question seems incomplete, but I suppose the question was:

"Classify Matter as Elements or Compounds Question. If something is a compound, it is also:

(Select the correct answer below)

an element

a pure substance

a mixture

a single atom."