which of the following compounds are expected to be soluble in carbon tetrachloride (ccl4) based on structure? select all that apply.

Answers

Answer 1

C8H18 compound is expected to be soluble in carbon tetrachloride (ccl4) based on structure.

Carbon tetrachloride (CCl4) is a nonpolar solvent, meaning it dissolves nonpolar compounds but not polar compounds. The solubility of a compound in CCl4 is dependent on the strength of the intermolecular forces between the solvent and solute.

Compounds with similar polarities to CCl4, such as nonpolar or slightly polar compounds, are expected to be soluble in CCl4. For example, alkanes, such as hexane (C6H14), and chlorinated solvents, such as chloroform (CHCl3), are soluble in CCl4.

On the other hand, polar compounds, such as water (H2O) or ethanol (C2H5OH), are not expected to be soluble in CCl4 due to the difference in polarities between the solvent and solute.

In summary, nonpolar or slightly polar compounds are expected to be soluble in CCl4, while polar compounds are not.

Learn more about carbon tetrachloride:

brainly.com/question/23871944

#SPJ4

which of the following compounds are expected to be soluble in carbon tetrachloride (ccl4) based on structure? select all that apply.

A. C8H18

B. C6H12

C. C4H6

D. None of the above

Which Of The Following Compounds Are Expected To Be Soluble In Carbon Tetrachloride (ccl4) Based On Structure?

Related Questions

How many electrons in an atom could have these sets of quantum numbers? =4,ℓ=3

Answers

14 electrons in an atom could have these sets of quantum numbers ℓ=3.  Quantum numbers are eigenvalues of operator

What is quantum numbers?

Quantum numbers are used in quantum chemistry and physics to explain the values of state maintains in the dynamic of either a quantum system. Quantum numbers are eigenvalues of operator that commute with Harmonic oscillator that may be known with accuracy while also knowing time as the program's energy as well as eigenspaces.

A description of every one of the quantum numbers of such a quantum system, when combined, completely characterizes the system's basic state and may, in theory, be measured collectively. ,ℓ=3 represents f subshell, which can occupy total 14 electrons.

Therefore, ,ℓ=3 represents f subshell, which can occupy total 14 electrons.

To learn more about quantum numbers, here:

https://brainly.com/question/2193783

#SPJ1

Iron has four naturally occuring isotopes: iron-54, iron-56, iron-57, and iron-58. The natural abundance of each of these isotopes
is shown in the table.
Isotope:
iron-54
iron-56
iron-57
iron-58
Natural Abundance (%):
5.80
91.72
2,20
0.28
-
Identify the isotope that is least abundant on Earth.
iron-54
iron-56
iron-57
-
Identify the isotope that is most abundant on Earth.
iron-57
iron-56
iron-58
iron-54

Answers

Iron has four naturally occurring isotopes: iron-54, iron-56, iron-57, and iron-58 are mentioned below.

What is isotope ?

The element's isotopes, though they belong to the same family of elements, differ in the number of neutrons they contain. According to the Periodic Table, an element's atomic number is based on how many protons it has.

What is iron ?

Several processes in our bodies require iron. Hemoglobin, a protein formed in part of iron, is one that carries oxygen from the lungs to every cell in the body. It helps our muscles retain and use oxygen. Iron is also found in a wide variety of other proteins and enzymes. Your body needs the recommended dosage of iron.

Least abundance means having least percentage , So iron-58 is 0.28% hence iron-58 is least abundant isotope of iron.

Most abundant means having highest percentage, so iron-56 is 91.72% ,hence most abundant isotope.

Therefore, Iron has four naturally occurring isotopes: iron-54, iron-56, iron-57, and iron-58 are mentioned above.

Learn more about isotope from the given link.

https://brainly.com/question/364529

#SPJ1

Consider the below 1H NMR spectrum. How many neighboring hydrogen atoms are there to the hydrogen atoms that produce signa C? A) 3B) 5C) 6 D) 2

Answers

The correct answer is "4".There are four  neighboring hydrogen atoms are there to the hydrogen atoms that produce signa CAs per the graph, signal C is spitted into quartet (i.e. four part).

According to given [tex]^{1}H[/tex] NRM spectrum:

Signal C is spitted into four numbered as 2.50, 2.45, 2.40, and 2,35.

It started from 2.50 and ended at 2.35, the difference is of 2.03.

So, As per the graph, signal C is spitted into quartet (i.e. four part).

Therefore, Among all the options of 3, 4, 4, 6, 2; there are four  neighboring hydrogen atoms are there to the hydrogen atoms that produce signa C.

Full question:

Consider the below 1H NMR spectrum. How many neighboring hydrogen atoms are there to the hydrogen atoms that produce signa C?

A) 3

B) 5

C) 6

D) 4

E)  2

To know more about hydrogen atoms:

brainly.com/question/130662

#SPJ4

Consider the following two compounds: H2O and H2O2. According to the law of multiple proportions, the ratio of hydrogen atoms per gram of oxygen in H2O to hydrogen atoms per gram of oxygen in H2O2 is:A. 4:1B. 2:2C. 1:2D. 2:1E. 1:1 D 21

Answers

The answer is D, 2:1. The ratio of hydrogen atoms per gram of oxygen in H2O is 2:1, and the ratio of hydrogen atoms per gram of oxygen in H2O2 is 2:2.

The law of multiple proportions states that the ratio of elements in different compounds of the same elements is a whole number. In H2O, there are two hydrogen atoms for every oxygen atom, meaning the ratio of hydrogen atoms per gram of oxygen is 2:1. In H2O2, there are two hydrogen atoms and two oxygen atoms, meaning the ratio of hydrogen atoms per gram of oxygen is 2:2. However, the question asks for the ratio of H2O to H2O2, meaning it is 2:1.

This law helps to confirm the atomic theory and shows that elements can combine in definite proportions to form compounds. It is also important in determining the empirical formula of a compound, which represents the simplest ratio of the elements present in a compound.

Learn more about empirical formula

brainly.com/question/11598242

#SPJ4

In which situation can Le Chatelier's principle be applied? (1 point) It can be applied when a reaction is reversible, and environmental conditions are kept constant. It can be applied when a reaction happens in a single direction, and environmental conditions are changed. It can be applied when a reaction happens in a single direction, and environmental conditions are kept constant. It can be applied when a reaction is reversible, and environmental conditions are changed.​

Answers

Le Chatelier's principle can be applied when a reaction is reversible, and environmental conditions are kept constant. Therefore, option A is correct.

What is Le Chatelier's principle ?

The Le Chatelier's principle may be described as follows: When a system is in a state of dynamic equilibrium and an external stress is applied, the system moves the location of equilibrium to cancel out the effect of the stress.

Chemical systems can be stressed by altering the concentration, pressure, or temperature.

According to Le Chatelier's principle, for exothermic reactions, the equilibrium changes towards the reactant side as the temperature rises; while, for endothermic reactions, the equilibrium shifts towards the product side as the temperature rises.

Thus, option A is correct.

To learn more about the Le Chatelier's principle, follow the link;

https://brainly.com/question/29009512

#SPJ1

Answer:

Changing Reaction Rates Quick Check

1. The forward reaction would increase to start reducing the concentration of N2.

2. It can be applied when a reaction is reversible, and environmental conditions are CHANGED.

3. The equilibrium will shift to the LEFT.

4. Adding steam allows more molecules of the REACTANTS to collide, causing the rate of the FORWARD reaction to increase.

5. an increase in the concentration of CO.

Explanation:

if you put these answers, 100%.

P.S. I used "kept constant" for question 2 like the person suggested and it was incorrect for me.

The combustion of octane, C8H18, proceeds according to the reaction shown.

2C8H18(l)+25O2(g)⟶16CO2(g)+18H2O(l)

If 546 mol of octane combusts, what volume of carbon dioxide is produced at 12.0 ∘C and 0.995 atm?

Answers

If 546 mol of octane combusts,102772.3 L volume of carbon dioxide is produced at 12.0 ∘C and 0.995 atm.

What is an ideal gas equation ?

The ideal gas law states that the product of the pressure and the volume of one gram molecule of an ideal gas is equal to the product of the absolute temperature of the gas and the universal gas constant.

It is represented by PV = nRT

Given:

Moles of octane = 546 moles

According to the given reaction:-

2C8H18(l)+25O2(g)⟶16CO2(g)+18H2O(l)

2 moles of octane on reaction produces 16 moles of carbon dioxide

1 mole of octane on reaction produces 16/2 moles of carbon dioxide

546 moles of octane on reaction produces 8 × 546 moles of carbon dioxide

Moles of carbon dioxide = 4368 moles

Given:  

Pressure = 0.995 atm

Temperature = 12.0 °C

The conversion of T( °C) to T(K) is shown below:

T(K) = T( °C) + 273.15  

T₁ = (12.0 + 273.15) K

= 285.15 K  

By using ideal gas equation as:

PV=nRT

where,  

P is the pressure

V is the volume

n is the number of moles

T is the temperature  

R is Gas constant having value = 0.0821 L.atm/K.mol

Applying the equation as:

0.995 atm × V = 4368 mol × 0.0821 L.atm/K.mol × 285.15K  

V = 102772.3

Thus, If 546 mol of octane combusts,102772.3 L volume of carbon dioxide is produced at 12.0 ∘C and 0.995 atm.

To learn more about an ideal gas equation, follow the link;

https://brainly.com/question/28837405

#SPJ1

show the equations you will use to calculate %protein, %phosphate, and %fat in milk

Answers

%Protein = (Protein content in Milk / Total Weight of Milk) x 100

%Phosphate = (Phosphate content in Milk / Total Weight of Milk) x 100

%Fat = (Fat content in Milk / Total Weight of Milk) x 100

Define weight?

Weight is a measure of the force of gravity on an object. It is the amount of mass an object has and is usually measured in kilograms (kg) or pounds (lbs). Weight is related to mass, but not the same; mass is the amount of matter in an object, while weight is a measure of the strength of gravity on that object. Weight is a vector quantity, which means it has both magnitude and direction. Weight is an important factor to consider when designing objects and structures, as it affects how much a material can support and the amount of stress it can withstand.

To learn more about weight

Here: https://brainly.com/question/229459

#SPJ1

Using the data in the Reagents and Properties table, calculate the theoretical yield of methoxybenzaldehyde in grams, assuming you start with 1.50 g of the alcohol. (Assume the alcohol is the limiting reactant). Be sure to show your work: you will NOT receive credit if work is not shown. You may wish to make a copy of this calculation to assist you with your post-lab questions

Answers

The theoretical yield of methoxy benzaldehyde is 1.47 g.

We must determine the quantity of p-methoxybenzyl alcohol consumed in the process in order to compute the theoretical yield of methoxy benzaldehyde.

The amount of methoxy benzaldehyde produced will be equal to the amount of p-methoxybenzyl alcohol consumed in the reaction because it is the limiting reactant.

Because the molar mass of 1.5 g of p-methoxybenzyl alcohol is 138.15 g/mol, its moles can be computed as follows:

moles of p-methoxybenzyl alcohol = 1.5 g / 138.15 g/mol = 0.0108 mol

Methoxy benzaldehyde's theoretical yield can be computed as follows:

Theoretical yield (g) = p-methoxybenzyl alcohol moles × the methoxy benzaldehyde molar mass (g/mol) = 0.0108 mol x 136.15 g/mol, or 1.47 g.

To Learn More About methoxy benzaldehyde click

brainly.com/question/14414155

#SPJ4

A pet store owner wants to mix a 11% saltwater solution and a 34 % saltwater solution to obtain 46
liters of a 21% solution. Let a stand for the amount of 11% solution and y for the amount of 34 %
solution.
a. How much saltwater is in the 11% solution?
b. How much saltwater is in the 34% solution?
c. Write an equation about the total amount of solution in the mixture.
x+y=46
d. Write another equation about the amount of saltwater in the mixture.
11x +34y= .21 (46)
O
e. Solve your system and answer the question: How many liters of each ingredient does he need?
11% solution:
34% solution:

Answers

a. The amount of saltwater in the 11% solution is 2.86 liters.

b. The amount of saltwater in the 34% solution is  6.8 liters.

c. The total amount of solution in the mixture is  46 liters.

d. The amount of saltwater in the mixture is  9.66 liters.

e. The pet store owner needs 26 liters of the 11% solution and 20 liters of the 34% solution.

How to find the e amount of saltwater in the 11% solution?

To solve this problem, we need to use a system of two equations in two variables. Let x be the amount of the 11% solution and y be the amount of the 34% solution. Then we have:

a. The amount of saltwater in the 11% solution = 0.11x

b. The amount of saltwater in the 34% solution =  0.34y

c. The total amount of solution in the mixture is 46 liters, so we have the equation x + y = 46.

d. The amount of saltwater in the mixture is the sum of the amount of saltwater in the 11% solution and the amount of saltwater in the 34% solution. This is given by 0.11x + 0.34y = 0.21(46) = 9.66.

So we have the system of equations:

x + y = 46

0.11x + 0.34y = 9.66

To solve this system, we can use substitution or elimination. Here we will use elimination:

Multiply the first equation by 0.11:

0.11x + 0.11y = 5.06

Subtract this from the second equation:

0.23y = 4.6

y = 20

Substitute y = 20 into the first equation:

x + 20 = 46

x = 26

Therefore, the pet store owner needs 26 liters of the 11% solution and 20 liters of the 34% solution.

So,

a. The amount of saltwater in the 11% solution is 0.11x = 0.11(26) = 2.86 liters.

b. The amount of saltwater in the 34% solution is 0.34y = 0.34(20) = 6.8 liters.

c. The total amount of solution in the mixture is x + y = 26 + 20 = 46 liters.

d. The amount of saltwater in the mixture is 0.21(46) = 9.66 liters.

e. The pet store owner needs 26 liters of the 11% solution and 20 liters of the 34% solution.

Learn more about amount of saltwater in the 11% solution here:https://brainly.com/question/21078392

#SPJ1

in an intramolecular proton transfer reaction, the acidic site and the basic site are tethered in the same structure, and a proton is passed from the acidic region of the structure to the basic region of the structure. an example is shown. draw a mechanism for this brocess.

Answers

The mechanism is given as

here, hydrogen is most acidic, so it's likely to have an intramolecular proton transfer reaction in this problem. One of  other sites for an acid base reaction will react with hydrogen because most of the oxygen is negative.

One of these oxygen's is going to act as a base and it's going to take this hydrogen and put it on that oxygen, their negative charge is going to act more basic than the other oxygen.

When electrons are shifted into hydrogen, We have an alcohol here and a carboxyl ion over here. Our acid now is an alcohol and our carboxylic acid is stronger, so we're going towards the weaker acid and base.

In other words, equilibrium is shifted towards the right.

To know more about proton transfer here

https://brainly.com/question/9809772

#SPJ4

What percentage of energy sources are found underground

Answers

Energy sources found underground Oil, natural gas, and coal are collectively called fossil fuels.

What energy sources are found underground?

sources of energy are fossil fuels formed within the Earth from dead plants and animals over millions of years—hence the name “fossil” fuels. They are established in underground layers of rock and dregs. Nonrenewable energy resources involve coal, natural gas, and oil, ... They are found in underground layers of rock and lees.

Still oil and natural gas will pursue to be the world's top two energy sources accounting for about 60 percent of global demand main energy sources are generally restricted as renewable or nonrenewable on the basis of whether they draw on an exhausted energy resource.

So we can conclude that Even today, oil, coal, and gas serve about 80 chunks of our energy source needs.

Learn more about energy here: https://brainly.com/question/13881533

#SPJ1


Hydrogen bonds account for which of the following observation?
01:05.
Hydrogen naturally exists as a diatomic molecule.
Hydrogen is easily combustible with oxygen. Spon
Water molecules are bent or "V-shaped".
Air is more dense than hydrogen gas.
For its molar mass, water has a high boiling point.
QAFAraGhe
A.
B.
C.
D.
E.
de slo zuibstedT
..

Answers

E) Water's high boiling temperature and molar mass are accounted for by hydrogen bonding.

What three different intermolecular forces of attraction are there?

The London dispersion force, the dipole-dipole interaction, and the ion-dipole interaction are the three main categories of intermolecular forces.

What do the forces of attraction between molecules mean?

A force that attracts the protons or positive parts of one molecule to the electrons or negative parts of another molecule is known as an intermolecular force. A substance's various physical and chemical properties are influenced by this force.

The forces that attract opposing positive and negative charges when two interacting molecules come into contact are known as intermolecular forces of attraction, or IMFA. These include the London dispersion force, hydrogen bonding, dipole-dipole, and ion-dipole forces.

To learn more about intermolecular forces of attraction here:

https://brainly.com/question/10941007

#SPJ1

Full Question = Hydrogen bonds account for which of the following observation? a) hydrogen naturally exists as a diatomic molecule b) it is easily combustible with oxygen c) water molecules are bent or "v-shaped" d) air is more dense than hydrogen bonds e) for its molar mass, water has a high boiling point

Answer:

E) Water's high boiling temperature and molar mass are accounted for by hydrogen bonding.

calculate the mass in g of agarose required to make 200 ml of a 1.2% agarose gel. record the answer to one decimal place

Answers

The mass in g of agarose required to make 200 ml of a 1.2% agarose gel is 2.4 g.

Agarose gel is defined as a three-dimensional matrix which is formed from helical agarose molecules in supercoiled bundles that are aggregated into three-dimensional structures with channels and pores through which biomolecules can pass.

Agarose gel electrophoresis is the main use of agarose gel which has proven to be an efficient and effective way of separating nucleic acids.

1.2% refers that 1.2 g of agarose is required to make 100 ml of agarose gel.

So, 200 ml of agarose gel will require 2.4 g of agarose.

Learn more about agarose gel from the link given below.

https://brainly.com/question/5661562

#SPJ4

The average mass of an M&M candy is 0.625 g. What is the mass of 12 M&Ms? The answer should
be reported to three (3) significant figures. Why are there no sig figs associated with 12 M&Ms?

Answers

Answer:The mass of 12 M&Ms can be calculated by multiplying the average mass of an M&M (0.625 g) by the number of M&Ms (12):

0.625 g * 12 = 7.5 g

The answer should be reported to three significant figures, so it would be 7.5 g.

There are no significant figures associated with 12 M&Ms because it is a whole number and does not have any uncertainty. Significant figures are used to indicate the degree of accuracy or precision of a measurement, and whole numbers are considered to be exact values without any uncertainty.

Explanation:

when six h2o molecules interact with six co2 molecules, the result is six c6h12o6 molecules and six o2 molecules. in this reaction the products are.

Answers

When six h2o molecules interact with six co2 molecules, the result is six c6h12o6 molecules and six o2 molecules.

What is a chemical reaction?

A chemical reaction is a process that transforms one set of chemical substances into another. It is characterized by changes in the chemical composition of a substance and the release or consumption of energy. During a chemical reaction, bonds between atoms are broken and new bonds are formed to produce different substances. These new substances have different properties than the original substances and may have different chemical and physical properties.

Chemical reactions can occur in a variety of ways, such as the mixing of two or more substances, the exposure of a substance to heat, light, or radiation, and the introduction of a catalyst to speed up the reaction. The chemical reactions that occur are governed by the laws of thermodynamics and the reaction rate is determined by the activation energy required to break the bonds of the reactant molecules.

To know more about chemical composition, visit:

https://brainly.com/question/678196

#SPJ1

Write the rate laws for the following elementary reactions. (Rate expressions take the general form: rate = k . [H2] . [Cl2].)(a) N2O4(g) ? 2 NO2(g)(b) NO2(g) + SO2(g) ? NO(g) + SO3(g)(c) Cl(g) + ICl(g) ? I(g) + Cl2(g)(d) CH2(g) + Cl2(g) ? CH2Cl2(g)

Answers

The rate laws of the following elementary reactions are:

 

(a) The rate law for the decomposition of N₂O₄ is: Rate = k[N₂O₄].(b) The rate law for the reaction of NO₂ and SO₂ is: Rate = k[NO₂][SO₂]. (c) The rate law for the reaction of Cl and ICl is: Rate = k[Cl][ICl]. (d) The rate law for the reaction of CH₂ and Cl₂ is: Rate = k[CH₂][Cl₂].

The rate of a chemical reaction is a measure of how quickly a reaction occurs. It is usually expressed as the change in concentration of a reactant or product per unit time. The rate of a reaction is affected by a number of factors, including temperature, concentration of the reactants, surface area of the reactants, and the presence of catalysts.

Learn more about elementary reactions:

https://brainly.com/question/14234763

#SPJ4

A sample of heptane always contains 84% carbon and 16% hydrogen. Which of these best explains this phenomena?a.Law of Constant Composition b.Law of Conservation of Mass c.Dalton's Atomic Theory d.Law of Mass Actione.Lavoisier's Law

Answers

The law of definite proportion best explains this phenomenon.

Heptane has been reported to constantly contain 84% carbon and 16% hydrogen. This indicates that heptane will always contain 84% carbon and 16% hydrogen, regardless of where it was produced or how it was produced. This accords with the law of definite proportion, which stipulates that regardless of the compound's origin or the chemical reaction that created it, a given compound will always contain its constituents in an unaltered mass ratio.

The law of definite proportions, commonly referred to as Proust's law or the rule of constant composition, holds that a chemical compound's constituents are always present in a predetermined ratio regardless of the source or method of synthesis (by mass).

The law of definite proportion serves as an example of this.

To know more about atomic theory

https://brainly.com/question/25176189

#SPJ4

Which compounds give a NMR spectrum with two signals in a ratio of 2:3?Knowing the molecular formula of a compound and integration values from its NMR spectrumgives the actual number of protons responsible for a particular signal.

Answers

Compounds give a NMR spectrum with two signals in a ratio of 2:3 are

CH3CH2ClCH3CH2CH3CH3CH2OCH2CH3CH3OCH2CH2OCH3 (there are two types of hydrogen atoms, the ratio is 6:

4 or 3:2)

About hydrogen

Hydrogen is a chemical element with symbol H and atomic number 1 on the periodic table. At standard temperature and pressure, hydrogen is a colorless, odorless, nonmetallic, monovalent, and highly flammable diatomic gas.

Hydrogen can also be produced from water by electrolysis, but this process is commercially more expensive than producing hydrogen from natural gas. The most abundant isotope of hydrogen in nature is protium, whose nucleus has only one proton and no neutrons.

For more information about the hydrogen atom, see https://brainly.com/question/29695801

#SPJ4 

Which of these molecules exhibit hydrogen bonding? Select all that apply. a) chloromethane. b) methanol. c) methane

Answers

Chloromethane and methanol are both capable of exhibiting hydrogen bonding, while methane does not.  The correct answer A and B.

Chloromethane and methanol both contain hydrogen atoms that are covalently bound to a more electronegative atom (chlorine and oxygen, respectively), which creates a partial positive charge on the hydrogen atom. This partial positive charge can interact with a partial negative charge on a nearby molecule, forming a hydrogen bond.

When hydrogen bonding occurs, the hydrogen atom acts as a bridge between two molecules, allowing them to interact and creating a strong bond. The hydrogen bond is formed when the partial positive charge on the hydrogen atom interacts with a partial negative charge on an electronegative atom of a nearby molecule.

Learn more about hydrogen bonding:

https://brainly.com/question/1420470

#SPJ4

orderly crystal shapes, high melting points, and electrical conductivity when dissolved in water are properties of ionic compounds. (True or False)

Answers

True. Ionic compounds are made up of ions, which are atoms that have a positive or negative charge due to the gain or loss of electrons.

What is atoms ?

Atoms are the building blocks of all matter in the universe. They are the smallest particles that make up elements and are composed of protons, neutrons, and electrons. Atoms are so small that they can only be seen with the aid of powerful microscopes. They are the fundamental particles of chemistry and cannot be broken down into anything simpler. Atoms are the basic unit of matter and each atom has its own unique chemical properties. The combination of these properties determines the physical and chemical characteristics of the substances made up of atoms. Atoms can combine with other atoms to form molecules, and molecules can combine to form compounds. This is the basis of all chemical reactions and the foundation of modern chemistry.

To learn more about atoms

https://brainly.com/question/6258301

#SPJ4

Which of the following is/are logical assumption(s) that can be derived from analysis of this pathway alone? In other words, disregard any side-pathways that may or may not stem from these two steps.Choose one or more:A. Ineffective argininosuccinase activity will cause a cellular accumulation of arginine.B. Ineffective argininosuccinate synthetase activity will cause a cellular accumulation of fumarate.C. Ineffective argininosuccinate synthetase activity will cause a cellular accumulation of citrulline.D. Ineffective argininosuccinase activity will cause a cellular accumulation of argininosuccinate.

Answers

The results of research on this particular pathway logically support the following statement: The inefficient activity of argininosuccinase causes cellular argininosuccinate to accumulate.

The enzymes argininosuccinase synthetase and argininosuccinase control the urea cycle, a metabolic process that helps the body get rid of excess nitrogen. Cells build up argininosuccinate because dormant argininosuccinase activity prevents the final step in the conversion of argininosuccinate to arginine and fumarate.

The urea cycle breaks down waste nitrogen into urea, which the body excretes. The enzymes argininosuccinate synthetase and argininosuccinase are necessary for this cycle. There is an accumulation of argininosuccinate inside the cell because argininosuccinase is unable to convert it to arginine and fumarate.

Learn more about argininosuccinate:

https://brainly.com/question/29870174

#SPJ4

fill the blank density is--property
a. an extensive.
b. an intensive.
c. a chemical.
d. a chemical.​

Answers

the answer is b - an intensive

Draw to scale the lines where the equipotential surfaces due to these plates intersect the paper. Limit your drawing to the region between the plates, avoiding their edges, and draw the lines for surfaces that are 10.0 V apart, starting at the low-potential plate.
how would my graph look?

Answers

The field strength is measured in Volts / meter (V/m). The voltage is 50V. The distance is 'halfway between' 25cm ( = .25m), or .125m. The field strength is thus = 50V / .125m = 400 V/m

Equipotential surfaces are surfaces where the potential difference is constant. In the given scenario, the two parallel metal plates are connected across a 50.0V battery, and the equipotential surfaces due to these plates will intersect the paper in the region between the plates.

The lines representing the equipotential surfaces will be perpendicular to the electric field lines and will be parallel to each other. The equipotential surfaces will start at the low-potential plate and be 10.0V apart, with the potential increasing as you move away from the low-potential plate. The equipotential surfaces will be closer together near the high-potential plate and further apart near the low-potential plate.

Learn more about voltage:

brainly.com/question/29445057

#SPJ4

Two very large metal parallel plates that are 25cm apart, oriented perpendicular to a sheet of paper, are connected across the terminals of a 50.0V battery. Draw to scale the lines where the equipotential surfaces due to these plates intersect the paper. Limit your drawing to the region between the plates, avoiding their edges, and draw the lines for surfaces that are 10.0 V apart, starting at the low-potential plate.

A homogenous mixture varies from a heterogenous mixture in that a homogenous mixture has properties that:A) do not vary in the mixtureB) vary in the mixtureC) suspend in a liquidD) dissolve a solute

Answers

A homogenous mixture varies from a heterogenous mixture in that a homogenous mixture has properties that do not vary in the mixture. The correct answer is A.

A homogeneous mixture is a mixture in which the properties and composition are uniform throughout the mixture. This means that if you took a sample from any part of the mixture, you would find the same properties and composition in that sample as you would find in the entire mixture.

In contrast, a heterogeneous mixture is a mixture in which the properties and composition vary throughout the mixture. For example, a salad is a heterogeneous mixture because you can see different ingredients such as lettuce, tomatoes, and croutons, each with different properties and composition.

So, in a homogeneous mixture, the properties do not vary, while in a heterogeneous mixture, the properties vary throughout the mixture.

Learn more about homogenous mixture here: https://brainly.com/question/1307383

#SPJ4

carboxylic acids are typically prepared using oxidation reactions. which of the functional groups below can be oxidized to give a carboxylic acid product? select all that apply.A) Primary alcohols
B) Phenols
C) Secondary alcohols
D) Alkynes

Answers

Primary alcohols and alkynes can be oxidized to give carboxylic acid products.

Addition of an oxidizing agent such as potassium permanganate (KMnO4) to acidic, alkaline, or neutral media shows the oxidation of primary alcohols to carboxylic acids. Aldehydes can be converted to carboxylic acids by using mild oxidizing agents. Oxidation of primary alcohols is a common method for the synthesis of carboxylic acids.

RCH2OH → RCOOH. This requires strong oxidants, most commonly chromic acid (H2CrO4), potassium permanganate (KMnO4), and nitric acid (HNO3). Primary alcohols and aldehydes are typically oxidized to carboxylic acids with potassium dichromate(VI) solution in the presence of dilute sulfuric acid.  

Learn more about oxidizing

brainly.com/question/29458295

#SPJ4

Predict the major organic product when trans-1-chloro-2-methylcyclohexane is heated with concentrated sodium ethoxide [dissolved in ethanol/dimethyl sulfoxide (DMSO) as the solvent]. Cl

+CH 3

CH 2

−OΘ /Na

( in EtOH/DMSO
3.0MCH 3

CH 2

ONa/Δ

Oc D. E.

Answers

The major organic product when trans-1-chloro-2-methylcyclohexane is heated with concentrated sodium ethoxide in ethanol/dimethyl sulfoxide (DMSO) as the solvent is expected to be 2-methylcyclohexanol.

This reaction is a nucleophilic substitution reaction where the sodium ethoxide acts as a nucleophile and attacks the chlorine atom, replacing it with an ethoxide ion and forming an intermediate alkoxide. The intermediate alkoxide can then undergo an elimination reaction, leading to the formation of the alcohol product. The reaction is expected to occur with Markovnikov's rule, meaning that the hydrogen from the alkoxide will add to the less substituted carbon in the intermediate, leading to the formation of 2-methylcyclohexanol. the major organic product when trans-1-chloro-2-methylcyclohexane is heated with concentrated sodium ethoxide [dissolved in ethanol/dimethyl sulfoxide (DMSO) as the solvent]. Cl

Learn more about 2-methylcyclohexanol. here:

https://brainly.com/question/28921179

#SPJ4

need help with this question

Answers

Based on the molecular structure of water and the physical state that water exists in at different temperatures, the molecular sketch that is correct is sketch A which is the solid state.

The correct option i

What are the various physical states that water can exist?

Solid, liquid, and gaseous are the three main physical states in which water can exist. Water can be found as ice or snow in a solid state. Water exists as steam or water vapor in the gaseous state.

In solids, the molecules of water are arranged in a fixed crystalline pattern.

In liquids, the molecules of water are free to move about but within a given limit by intermolecular forces.

As gases, the molecule is not held back by any intermolecular forces.

Learn more about the physical states of water at: https://brainly.com/question/14711627

#SPJ1

What is a unit for distance?

Answers

There are several units for distance, but the most commonly used unit in the International System of Units (SI) is the meter (m). The meter is defined as the distance traveled by light in a vacuum during a time interval of 1/299,792,458 of a second.

What is Distance?

Distance is a measure of the amount of space between two points. It is the length of the path taken by an object or person moving from one point to another, regardless of the direction taken. Distance is a scalar quantity, meaning it has magnitude but not direction.

Distance can be measured using a variety of units, such as meters, kilometers, miles, or feet, depending on the context and the scale of the distance being measured. For example, we might measure the distance between two cities in kilometers, the distance between two buildings in meters, or the distance between two points on a map in miles.

Other units for distance include:

Kilometer (km): 1,000 meters

Centimeter (cm): 1/100th of a meter

Millimeter (mm): 1/1,000th of a meter

Micrometer (µm): 1/1,000,000th of a meter

Nanometer (nm): 1/1,000,000,000th of a meter

There are also larger units for distance, such as the astronomical unit (AU) which is used to measure distances within the solar system.

Learn more about Distance from given link

https://brainly.com/question/26550516

#SPJ1

A sample of 0.53 gNa₂CO3, is added to 101 ml of 0.1 N H₂SO4 solution. a. Will the resulting b solution be acidic, basic or neutral?​

Answers

A sample of 0.53 gNa₂CO3, is added to 101 ml of 0.1 N H₂SO4 solution. Therefore, solution will be Neutral.

What are acid, base and neutral solution?

Depending on how fully an acid separates into its ions when placed in water, it can be classified either as strong or weak. In water, a powerful acid, like hydrochloric acid, totally dissociates into its ions. A weak acid barely partially separates into its ions, leaving the acid in the solution together with water and ions.

The terms Arrhenius bases, Brnsted bases, while Lewis bases refer to the three meanings of the word base that are most often used. According to every definition, bases are materials that react to acids. When hydronium as well as hydroxide ion concentrations are equal, a solution is neutral.

Na₂CO₃ + H₂SO₄ → NA₂SO₄ + CO₂ + 2H₂O

Equivalent weight of Na₂CO₃.H₂O = 62 g

weight of Sodium carbonate (Na₂CO₃) = 0.62 g.

W = {N × E × V}/{1000}

0.62 = ( N x 62 x 100 ) / 1000

N = 0.62 x 1000 / 62 x 100

N = 620/6200

N= 0.1

Normality of Na₂CO₃ and H₂SO₄ is Same that is 0.1 N . Solution will be Neutral.

Therefore, solution will be Neutral.

To know more about acid, base and neutral solution, here:

https://brainly.com/question/602584

#SPJ9

experiment 2: calculate the molar mass of fp sample 2. note that this sample dissociates to form two ions in solution.

Answers

The molar mass of fp sample is 74.5513 g/mol

What is molar mass?

The molar mass of a sample is the mass of a single mole of the sample in grams. Since the sample dissociates to form two ions in solution, the molar mass will be the sum of the masses of the two ions. To calculate the molar mass, you need to know the mass of each ion, which can be calculated by multiplying the atomic mass of each element in the ion by the number of atoms of that element in the ion. For example, if the sample is KCl, the molar mass would be calculated as follows:

Molar mass = atomic mass of potassium (39.0983 g/mol) * 1 atom of potassium + atomic mass of chlorine (35.453 g/mol) * 1 atom of chlorine

Molar mass = 39.0983 g/mol + 35.453 g/mol

Molar mass = 74.5513 g/mol

To learn more about molar mass
https://brainly.com/question/837939
#SPJ4

Other Questions
What is a USA employment authorization Card? equation in point slope from of slope of 0.25 and point of (5,-2) which political theory question didKurt Vonnegut answered? 12) through: (-1,-5), parallel to y = 3x - 4pls help, thanks pookies!!!! when i replace old belt with new belt on shark vacuum the roller brush will run and then the roller brush will stop running ? if x is the symbol of an element, which pair correctly represents isotopes of x? 15864x and 15864x 64158x and 15864x 15864x and 15865x 15864x and 15964x The population of deer is growing in a given region, and has a carrying capacity of 2500. If at the initial point ofobservation (t = 0), there were 400, and 700 four years later, give the logistic model for the population P, and find thenumber of deer after 10 years. Taylor has a points card for a movie theater.She receives 75 rewards points just for signing up.She earns 6.5 points for each visit to the movie theater.She needs at least 100 points for a free movie ticket.Which inequality can be used to determine v, the minimum number of visits Taylor needs to earn her first free movie ticket? whats 2848x838449 / 294949 x 3848483 + 300,000,000 lets tal.k about school im bo.re.d alcohol and sedatives/hypnotics shut of neuron firing by increasing the permeability to this ion. What is that ? factorise this : 9x^2-4y^2 How to determine if two verticals are similar Can some help pleasee it is due tonight and its the only question I need,I also need to do ate by step if its not much to ask The map above shows what group with the largest territory?A) FrenchB) EnglishC) AustriansD) Turks the __________________ led to increased food supply but decreased need for farm labor, so more people began moving to cities for work. In 1963, images of white police officers attacking black civil rights activists were broadcast on American television to a national audience. Fill in the blanks to complete the passage about reflection theory.The TV images stirred up sympathy for the (1) and support for (2). This is (3) reflection theory, which holds that (4) only reflect, and do not influence, (5). HELP PLEASE !!!!!! During a forehand volley, step 5 includes taking a short jab step forward with a follow through to the keep the racquet in front of you.Question 1 options: True FalseQuestion 2 (3 points) When striking a pitched ball, you should ___Question 2 options:A. have a shoulder width stanceB. hold the bat above your dominant shoulderC. have your eyes on the pitcherD. all of the aboveQuestion 3 (3 points) SavedWhen dribbling a basketball, you should use the palm of your hand.Question 3 options: A. True B. FalseQuestion 4 (3 points) SavedWhen pivoting in basketball, you must keep one foot grounded at all times.Question 4 options: A. True B. FalseQuestion 5 (3 points) Which of the following is NOT a key component to dribbling a soccer ball?Question 5 options:A. keeping your toe downB. locking your ankleC. make solid contact with the ball with the heel of your shoeD. your non-dominant foot should be behind you for balanice Find the indicated side of the right triangle Karl hikes 3 kilometres in 36 minutes. Given that his distance is directly proportional to the time he walks, determine the constant of proportionality and write an equation to represent the direct proportion. a garden table and a bench cost $1000 combined. The cost of the garden table is three times the cost of the bench. What is the cost of the bench?