Answer:
serial in which container is filled
Solid -base of container
Liquid- above solid
Gas- above liquid
Explanation:
If any mixture of matter in different state (that solid , liquid or gas )are kept in any container, then substance with higher density will be settled at lowest surface first and similarly the substance with lowest density will be at upper part of container.
In the given container we have to keep solid, liquid and gas
sold has the highest density,gas the lowest density andliquid has the density higher than gas but less than solid.based on this
solid will be at surface of container
above sold will be liquid
above liquid will be presence of Gas
serial in which container is filled
Solid -base of container
Liquid- above solid
Gas- above liquid
You and your friends are going on a picnic in a very small car. On your way, the car breaks down and you try to push it to get it to move but in vain. You ask your friends to help you and the car starts moving and revs up. How are you and your friends applying Newton's second law of motion here? What if the car you were traveling in was a large SUV?
Answer:
The pushing of the car by you and your friends is the applied force and when the car moves, it means that the velocity has changed thus causing the movement or acceleration.
Explanation:
Newton's work on forces regarding motion can never be neglected by scientists. Sir Isaac Newton when he was alive, among several of his works he proposed the three laws guiding the forces of motion. In this question we are only going to be treating only one out of the three Newton's Law of motion and that is the second Law Of Newton's laws of motion.
The second Law Of Newton's laws of motion states that the acceleration of an object is directly proportional to the applied force and inversely proportional to the object's mass.
(1). Now, to the question: " How are you and your friends applying Newton's second law of motion here? "
The pushing of the car by you and your friends is the applied force and when the car moves, it means that the velocity has changed thus causing the movement or acceleration.
According to the law, the more the Force, the more the acceleration.
(2). For the second part of the question, " What if the car you were traveling in was a large SUV?"
From the law stated above we see that the acceleration is inversely proportional to the mass, thus if the car is a large SUV, It means that more force is needed to change the car's velocity.
Answer:
When a friend joins you in pushing the small car, the net force on it increases. Therefore, it starts to move. The mass of a SUV is much greater than that of a small car. You would thus need the help of more friends to help push it.
Explanation:
Plato/Edmentum
Questlon 6 of 10 Which two types of energy does an apple falling to the ground have?
A. Potential energy
B. Nuclear energy
C. Kinetic energy
D. Elastic energy
E. Sound energy
A. Potential energy C. Kinetic energy
I just took the quiz
Answer:
Potential energy + Kinetic energy
Explanation:
ap3x verified
A scientist who conducted an experiment obtained an unexpected result. What will she most likely do with the unexpected result? leave it out of her analysis and final report stop the experiment and begin again change the procedures and try again develop a new question to be investigated
Answer: stop the experinment and begin again sometimes the result of the experiment may give you unexpected results due to the fact that you may have missed a certain step or you didn't follow the procedure accurately to the dot, hence it's important to redo the experiment and see if every step was followed accurately before you can discard the results or change the procedure.
Explanation:
Answer:
d
Explanation:
A sprinter can run 100.0 meters in 10.4 seconds. Find the velocity of this runner. (Please put answer into ladder cancellation format!!)
True or False. Energy can move in waves.
True, energy can in move in waves because waves transfers energy during their propagations.
A wave is a disturbance that transfers energy from one point to another, along its path of propagation.
A wave can be mechanical or electromagnetic.
A mechanical type of wave requires material medium for its propagation.
Examples;
sound wavewater waveAn electromagnetic wave does not require material medium for its propagation.
Examples;
Gamma rayx-rayultraviolet rayvisible light, etcThus, we can conclude that energy can in move in waves because waves transfers energy during their propagations.
Learn more here:https://brainly.com/question/762967
5 grams is thes than greater than or equal too 508mg
Answer:
yes 5 is greater
Explanation:
Answer: 5 grams is greater than 508 milligrams. Even though the number '508' is larger than '5,' you need to look at the units.
pls help asap pls explain. Just before opening her parachute a skydiver having a mass of 50 kg reaches terminal velocity. Calculate the force of air resistance if the buoyant force is 20 N. Be careful! Use the skydiver’s mass to calculate his/her Fg (force of gravity).
Answer:
490N
Explanation:
Given that,
Mass of a skydiver, m = 50 kg
Buoyant force = 20 N
When the skydiver reaches the terminal velocity, net force on her is equal to 0. So, air drag is equal to the weight of the skydiver.
D = mg
Putting all the values,
D = 50 × 9.8
D = 490 N
So, the force of air resistance is 490 N.
A runner starts at rest and accelerates until reaching a speed of 9.0 m/s. A graph of her velocity over time is shown below
Velocity
m
15+
12+
9
6
3+
Time (s)
1
3
6
9
12 15 18
What is her average acceleration from 0 to 9.0 seconds?
Answer:
0.67 m/s^2
Explanation:
khan academy
What is the depth of the crater if the time is 6.3 s? An astronaut stands by the rim of a crater on the moon, where the acceleration of gravity is 1.62 m/s2. To determine the depth of the crater, she drops a rock and measures the time it takes for it to HIT the bottom
Complete Question
An astronaut stands by the rim of a crater on the moon, where the acceleration of gravity is 1.62 m/s2. To determine the depth of the crater, she drops a rock and measures the time it takes for it
to hit the bottom. If the time is 6.3 s, what is the depth of the crater?
Answer:
The depth is 32 m
Explanation:
From the question we are told that
The time is t = 6.3 s
The acceleration due to gravity is [tex]g = 1.62 \ m/s^2[/tex]
Generally from kinematic equation
[tex]s = ut + \frac{1}{2} - at^2[/tex]
Here the u is the initial velocity and the value is 0 m/s
[tex]s = 0 + \frac{1}{2} - (1.62) * (6.3)^2[/tex]
[tex]s = 32 \ m [/tex]
Why would the CPSC perform studies when other soap and detergent companies have already conducted research on the same products? The CPSC is the only organization that can test the safety of soaps and detergents. Studies conducted by any company that benefits financially are considered unreliable. Studies performed by the CPSC give reliability to the results of improved safety obtained by each soap company. Tests performed by the CPSC follow established scientific methods, but those performed by soap companies do not.
Answer: Studies performed by the CPSC give reliability to the results of improved safety obtained by each soap company.
Explanation:
The function of Consumer Product Safety Commission is to make sure that the products which are used by consumers are safe and also make sure that companies meet the required and acceptable safety standards. The products that are seen to be harmful to the health of the consumers are banned.
Regarding the question above, CPSC would perform studies when other soap and detergent companies have already conducted research on the same products because the studies performed by the CPSC give reliability to the results of improved safety obtained by each soap company.
Answer:
Tests performed by the CPSC follow established scientific methods, but those performed by soap companies do not.
Explanation:
i’m about to end my life over this class I have a 46.9% right now :) do not take physics. i repeat if you’re seeing this DO NOT EVER TAKE PHYSICS.
Coulomb's law describes how the charge on and distance between two
particles affect the electric force between them. Which situation will result in
the two particles being attracted to each other?
The situation in which one particle has a positive charge and one has a negative charge will result in the two particles being attracted to each other.
What is Coulomb's law?It states that the force between two charged particles is directly proportional to the product of the magnitude of the charges and inversely proportional to the square of the distance between them.
Given is Coulomb's law which describes how the charge on and distance between two particles affect the electric force between them.
From the properties of charges, we know that the like charges repel and unlike charges attract each other. This means that two positive charges will repel each other and two negative charges will also repel each other. However, if one positive and one negative charge are brought closer to one another, than they will attract each other.
Therefore, the situation in which one particle has a positive charge and one has a negative charge will result in the two particles being attracted to each other.
To solve more questions on Coulomb's law, visit the link below-
brainly.com/question/10933224
#SPJ5
3. A person who is initially stationary is eventually walking
at a speed of 1.5 m/s after an acceleration of 0.5 m/s?,
calculate the distance it takes them to reach this speed.
4. A lorry pulls forward after initially being stationary, it
takes the lorry 40 m to reach a speed of 8 m/s, calculate the
lorry's acceleration.
7. A person begins moving after initially being stationary, the person
accelerates at 0.5m/s2 over a distance of 9m what is their final speed
Explanation:
3. A person who is initially stationary is eventually walking
at a speed of 1.5 m/s after an acceleration of 0.5 m/s?,
calculate the distance it takes them to reach this speed.
Given parameters:
Initial velocity = 0m/s
Final velocity = 1.5m/s
Acceleration = 0.5m/s
Unknown:
Distance = ?
Solution:
To solve this problem, we apply the relevant motion equation;
V² = U² + 2aS
where V is the final velocity
U is the initial velocity
a is the acceleration
S is the distance
Input the parameters;
1.5² = 0 + 2 x 0.5 x S
2.25= S
The distance to reach this speed is 2.25m
4. A lorry pulls forward after initially being stationary, it
takes the lorry 40 m to reach a speed of 8 m/s, calculate the
lorry's acceleration.
Given parameters:
Initial velocity = 0m/s
Final velocity = 8m/s
Distance = 40m
Unknown:
Acceleration = ?
Solution:
V² = U² + 2aS
Input the parameters and solve;
8² = 0² + 2 x a x 40
64 = 80a
a = [tex]\frac{64}{80}[/tex] = 0.8m/s²
7. A person begins moving after initially being stationary, the person
accelerates at 0.5m/s2 over a distance of 9m what is their final speed
Given parameters:
Initial velocity = 0m/s
acceleration = 0.5m/s²
distance = 9m
Unknown:
Final velocity = ?
Solution:
V² = U² + 2aS
Input the parameters and solve;
V² = 0² + 3 x 0.5 x 9
V² = 13.5
V = 3.7m/s
IDK MORE POINTS BUT SAY SOMTHING FUNNY
Not the place for this but yesterday I ate a clock, it was very time consuming.
What is brown and sticky
A STICK GET YOUR MIND OUT OF THE GUTTER
he lower the frequency of the wave the ____________ it will have.
a
more medium
b
more energy
c
more amplitude
d
less energy
Explanation:
D. Less Energy
The more energy in a wave, the higher it's frequency
The less energy in a wave, the lower the frequency is
Look at pic.... 2 examples of radiation and how they are radiation
Answer:21
Explanation:
what pair of features best characterizes a sound wave?
Answer:
The only thing you need to know which pair of features that best characterizes a sound wave is to view the graph or the image of monitor.
Explanation:
An object on another planet with g = 25 m/s^2 hits the ground from rest in 4 seconds. How far did it fall?
Choices:
•200.0m
•100.0m
•1000.0m
•25.0m
Which model of the atom has electrons traveling in specific paths around the nucleus? Bohr's model Rutherford's model Thomson's model Dalton's model
Answer:
A, Bohr's model
Explanation:
Took the quiz, hope it's right for you.
(The other three did have something to do with it they just didn't create that specific model)
The model of the atom that has electrons traveling in specific paths around the nucleus is Rutherford's model.
Therefore, the correct answer is option B
J. J Thomson proposed that the atom is a sphere of positively charged matter in which negatively charged electron are embedded.
In Rutherford's model of atomic structure, the electrons moves in orbits by electrostatic attraction to the positively charged nucleus.
According to Dalton's atomic theory, atom were indestructible and indivisible solid particle.
Bohr's model made assumption that electron can only exist in circular orbits of definite quantum energy.
According to the question, the model of the atom that has electrons traveling in specific paths around the nucleus is Rutherford's model.
Therefore, the correct answer is option B
Learn more here : https://brainly.com/question/16776207
A force of 500 N acts for a time interval of 0.001 second on an object of mass 0.20 kg that was initially at rest. Calculate the final velocity of the object after the force acts
Answer:
100
Explanation:
The final velocity of the object after the force acts is 2.5 meters per second.
To calculate the final velocity of the object after the force acts, we can use Newton's second law of motion, which states that:
Force = Mass × Acceleration
We need to find the acceleration of the object first. Since the object was initially at rest, its initial velocity (u) is 0 m/s.
The force acting on the object is 500 N, and the mass of the object is 0.20 kg. We can rearrange the equation to find the acceleration (a):
Acceleration (a) = Force / Mass
a = 500 N / 0.20 kg
a = 2500 m/s²
Now, we can use the kinematic equation to find the final velocity (v) of the object:
Final velocity (v) = Initial velocity (u) + (Acceleration × Time)
The initial velocity (u) is 0 m/s (since the object was initially at rest), and the time interval (t) is 0.001 second.
Final velocity (v) = 0 m/s + (2500 m/s² × 0.001 s)
v = 0 m/s + 2.5 m/s
v = 2.5 m/s
Hence, the final velocity of the object after the force acts is 2.5 meters per second.
To know more about final velocity here
https://brainly.com/question/28608160
#SPJ2
True or False? Physical properties can be observed or measured without changing the identity of matter.
Answer:
true
Explanation:
1.Why is wheel and axle a simple machine?
2.What is meant by effort is multiplied?
Answer:
The wheel and axle is a type of simple machine used to make tasks easier in terms of manipulating force by applying the concept of mechanical advantage.Due to the size difference in the radius of the wheel and axle, this means that the distance the two parts rotate through in the same amount of time is different.
A stone dropped from the top of a building strikes the ground in 4.2 s. How tall is the building? Someone explain please!
Answer:
well i'm not sure if which unit of measure you need but i think its 86.49 meters tall.
1. Describe the two phenomena (sub-problems) that caused the contamination of Cleveland’s drinking water. 2. What criteria (data points) were the NOAA buoys collecting to address the sub-problems faced by Cleveland Water? Which of these criteria should have highest priority when determining a solution to the sub-problems? 3. What societal, ecological, or technical constraints should resource managers consider before proposing solutions? 4. Describe the design solution engineers and scientists developed to prevent contamination of Cleveland drinking water. Why did their solution need to address both sub-problems equally? 5. Propose two additional solutions to address the ecological phenomena causing the water contamination in Lake Erie.
Answer:
Explanation:
1) One was the harmful algae blooms that happen annually. The other is hypoxia development which is also a seasonal phenomenon. 2) Temperature should have been highest priority.
If an object is moving up, is it considered to have a positive or negative velocity?
Answer:
A positive velocity
Explanation:
3. What are the two parts of a shadow?
O opaque area and dark area
the umbra and penumbra
O the umbra and
antunghaya
O the illuminated opaque object and the umbra
Answer:
the umbra and penumbra
Explanation:
The two parts of a shadow are the umbra and penumbra.
A shadow is an expression formed when light from a source is cut blocked by an opaque body.
Most shadows are made up of two parts, umbra and penumbra.
The umbra is the darkest, and the innermost part of a shadow. In the penumbra, only a portion of the light source is blocked. It is more of like a partial shadow.The umbra is directly formed by light which impinges on an opaque body and it completely cut off.
What are the theoretical properties of a gas at a temperature at 0 kelvin?
Answer:
The theoretical properties of a gas at a temperature of 0 Kelvin would be solid and hard. It will go from gas to liquid and finally to a solid state. All the particles will be mushed together. If a gas at zero degrees Celsius were cooled to -273 degrees Celsius, its volume would be reduced by 273/273 and become zero.
What does it mean to
"accelerate"?
Answer:
increase in amount or extent.
Explanation:
in other words speed up or go faster in a less time period
Which characteristic is related to kinetic energy but not potential energy?
A. An object's shape
B. An object's mass
C. An object's speed
D. An object's height
Answer:
c
Explanation:
An object's speed is the characteristic which is related to kinetic energy but not the potential energy. Thus, the correct option is C.
What is Kinetic energy?The kinetic energy of an object is the energy which it possesses due to the motion of the object. Kinetic energy is defined as the work which is needed to accelerate an object of a given mass from rest position to its stated velocity. Having gained this amount of energy during the acceleration of the object, the object maintains this kinetic energy unless its speed changes or it experiences acceleration.
Kinetic energy is directly proportional to the mass of the object and to the square of the velocity of the object, the expression is:
K.E. = 1/2 m × v²
where, KE = Kinetic energy,
m = mass of the object,
v = velocity of the object.
Therefore, the correct option is C.
Learn more about Kinetic energy here:
https://brainly.com/question/26472013
#SPJ2
A car is said to go "zero to sixty in six point six
seconds" (0 to 60 mph in 6.6 seconds). What is its
acceleration in m/s??