Earth carries a net charge of about -5×10−5 C. 10 and many more electrons are there than protons on Earth.
What is electron?
It is possible for an atom to have an attached or detached electron, a negatively charged subatomic particle (not bound). The electron, along with protons and neutrons, is one of the three main particle types found inside an atom. Atomic nuclei are composed of protons, neutrons, and electrons.
What is proton?
In the nucleus of every atom, there is a proton, a subatomic particle. Though going in the opposite direction from the electron, the particle has a positive electrical charge. The mass of an isolated proton, which is almost equal to that of a neutron, is just 1.673 x 1027 kg.
Therefore, earth carries a net charge of about -5×10−5 C. 10 and many more electrons are there than protons on Earth.
Learn more about electrons from the given link.
https://brainly.com/question/13998346
#SPJ4
Calculate the frequency of an x-ray having a wavelength of 2.5 x 10-7 cm.
The frequency of an x-ray having a wavelength of 2.5×10⁻⁷ cm is 1.2×10¹⁷ Hz
How do I determine the frequency of the x-ray of wavelength 2.5×10⁻⁷ cm?We'll begin by converting the value of the wavelength from cm to m. Details below:
Wavelength (in cm) = 2.5×10⁻⁷ cmWavelength (in m) =?100 cm = 1 m
Therefore
2.5×10⁻⁷ cm = (2.5×10⁻⁷ cm × 1 m) / 100
2.5×10⁻⁷ cm = 2.5×10⁻⁹ m
Finally, we shall determine the frequency of the x-ray. This is shown below:
Wavelength (λ) = 2.5×10⁻⁹ mSpeed of x-ray (v) = 3×10⁸ m/sFrequency of x-ray (f) =?Velocity (v) = wavelength (λ) × frequency (f)
3×10⁸ = 2.5×10⁻⁹ × frequency
Divide both sides by 2.5×10⁻⁹
Frequency = 3×10⁸ / 2.5×10⁻⁹ m
Frequency = 1.2×10¹⁷ Hz
Thus, from the above calculation, we can conclude, the frequency is1.2×10¹⁷ Hz
Learn more about frequency:
https://brainly.com/question/15326129
#SPJ1
How many watts are in a horsepower?
There are approximately 746 watts in a horsepower. It is a unit of mechanical power, defined as the rate at which work is done.
What is watts in terms of horsepower?
A horsepower is a unit of power commonly used to measure the output of engines or motors. It is a unit of mechanical power, defined as the rate at which work is done.
One horsepower is equivalent to 746 watts, which means that a device that uses one horsepower can perform 746 watt-seconds of work in one second. This unit was originally defined by James Watt in the 18th century and was used to measure the power of steam engines.
Today, the term horsepower is still widely used to describe the power of engines and motors, even though it has largely been replaced by the more scientific unit of watts for precise measurement.
To learn more about horsepower, visit: https://brainly.com/question/28994705
#SPJ4
FILL IN THE BLANK. as the physical spacing of the distance between water molecules changes, the ______ of the water may change too.
As the physical spacing of the distance between water molecules changes, the density of the water may change too.
A substance's density is determined by how much mass it has per unit of volume. In other words, it is a measure of how much matter is contained in a certain amount of space. The density of a substance can be influenced by various factors, including temperature and pressure. In the case of water, changes in temperature can lead to changes in the physical spacing between water molecules. When water is heated, the individual water molecules begin to move more quickly, which increases the average distance between them. This increase in the space between the water molecules leads to a decrease in the overall density of the water. As a result, hot water is less dense than cold water. Conversely, when water is cooled, the individual water molecules slow down, which decreases the average distance between them. This decrease in the space between the water molecules leads to an increase in the overall density of the water. As a result, cold water is more dense than hot water. In summary, as the physical spacing of the distance between water molecules changes, the density of the water may change too. This relationship between temperature and density is one of the unique properties of water that is critical to many biological and ecological processes.
To know more about density please refer: https://brainly.com/question/29775886
#SPJ4
If the mass of the cart was halved the magnitude of the centripetal acceleration of the cart would.
If the mass of the cart was halved the magnitude of the centripetal acceleration of the cart would remain same.
What Is Centripetal Acceleration ?
Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center.
The rate at which tangential velocity changes is known as centripetal acceleration. Centripetal force is defined as the total force that accelerates an item in a circular motion. As we can see, mass has no bearing on an object's centripetal acceleration; as a result, the centripetal acceleration is unaffected by changes in mass.
To know more about centripetal acceleration use link below:
https://brainly.com/question/19246433
#SPJ4
The second step in the Gram staining procedure involves flooding the slide for one minute with
A. safranin.
B. iodine.
C. a decolorizing agent.
D. crystal violet.
There are four fundamental steps in the Gram staining procedure:1. Apply a base color (crystal violet). 2. Adding Gram's iodine as a mordant. 3. Rapid decolorization with acetone, ethanol, or a combination of the two. 4. Using safranin as a counterstain, therefore, option b is the right choice.
A Gram stain is a laboratory test that looks for bacteria in some physiological fluids or at the probable location of an infection. Healthcare personnel may quickly determine whether germs are present and, if so, what type of bacteria they are thanks to the Gram stain, which is processed by a medical laboratory expert (s). Further identification tests and treatment options may be guided by this.
A broad class of single-celled creatures is known as bacteria. They may reside on your skin and in various locations throughout your body. While some bacteria are benign or even helpful, others can lead to illnesses and diseases. Gram stains are used to identify dangerous bacteria.
Want to know more about Gram staining visit the link which is given below;
https://brainly.com/question/14969595
#SPJ4
What information is needed to calculate the gravitational force of an object?(1 point).
To calculate the gravitational force of an object mass of two objects and the distance between the object.
What is Gravitational Constant?
The gravitational constant, abbreviated G, is an empirical physical constant used in the calculation of gravitational effects in both Albert Einstein's theory of general relativity and Sir Isaac Newton's law of universal gravitation.
The gravitational force is one of the different types of forces in physics. It is a force that draws any two mass-containing objects together. Due to the fact that it always draws the masses of two objects together, the gravitational force is also referred to as the attractive force. According to Newton's law of gravitation, every object in the universe is attracted to other objects. Strong, weak, electromagnetic, and other types of forces are among the others.
Gravitational Force = (Gravitational Constant × Mass of first object × Mass of the second object) / (Distance between the centre of two bodies)2
The unit of gravitational force is newton.
To learn more about force, click on the below link:
https://brainly.com/question/29229499
#SPJ4
Which of the following are not true of covalent electrolytes? (select all that apply) Select all that apply: They contain only covalent bonds. They may contain ions. All soluble covalent compounds are covalent electrolytes. None of the above
The options Not true for covalent electrolytes-
They may contain ions.All soluble covalent compounds are covalent electrolytes.Explain about the covalent electrolytes?Because it is only very faintly ionized—at 25 °C, only two molecules out of every 1 billion ionize—pure water is a relatively poor conductor of electricity.
Hydronium but also hydroxide ions are produced when one water molecule donates a proton to some other water molecule.So because solute molecules interact chemically with solvent to create ions, covalent compound solutions occasionally transmit electricity. For instance, covalent HCl molecules make up the gas known as pure hydrogen chloride. There are no ions in this gas. However, we discover that solution is an exceptionally good conductor when hydrogen chloride is dissolved in water.An important role for the water molecules in the formation of ions is: hydrogen chloride solutions in a variety of different solvents.Thus, the choices Covalent electrolytes can contain ions, therefore this is not necessarily true. Covalent electrolytes are all soluble covalent substances.
To know more about the covalent electrolytes, here
https://brainly.com/question/15450886
#SPJ4
take the slope of the curve to determine the velocity, in meters per second, at time t = 30.0 s.
The slope of the curve to determine the velocity is 0.238 m/s.
The graph given in the question is the position versus time plot. The slope of the position versus time plot gives the velocity of the object. Firstly, we can write coordinates of the endpoint of the graph as (0.00,2.50) and (70.0,19.0) as shown in the figure below.
The slope of the line is obtained as,
V=19.0 m-2.50 m/70.0 - 0.00 s=0.2375 m/s
≈ 0.238 m/s
Since position and time are almost directly proportional, so the corresponding slope (velocity) would remain constant throughout the motion. This implies that velocity at any time, say at t = 30 s, will be equal to the slope of the position-time graph.
Learn more about velocity:
brainly.com/question/80295
#SPJ4
Complete ques is
Using approximate values, calculate the slope of the curve in the given figure to verify that the velocity at t = 30.0 s is 0.238 m/s. Assume allvalues are known to 3 significant figures.
in a thundercloud, there may be electric charges of 140.0 c near the top of the cloud and 240.0 c near the bottom of the cloud. these charges are separated by 2.00 km. what is the electric force on the top charge?
Answer:
The electric force between the two charges is given by Coulomb's Law:
F = k * q1 * q2 / r^2
Where:
k = Coulomb constant = 8.99 x 10^9 N * m^2 / C^2
q1 = 140.0 C
q2 = 240.0 C
r = 2.00 km = 2.00 x 10^3 m
F = k * 140.0 * 240.0 / (2.00 x 10^3)^2
F = 1.7 x 10^9 N
So, the electric force on the top charge is 1.7 x 10^9 N.
Explanation:
Which of the following statements is false? Net forces act on the car during intervals A and C. The magnitude of the net force acting during interval C is greater than that during A. No net force acts on the car during interval B. Opposing forces may be acting on the car during interval C. Opposing forces may be acting on the car during interval D.
The amount of net force acting on an item is equal to the object's mass times its acceleration. An object is not speeding and is said to be in an equilibrium state if there is zero net force acting on it. Thus, option B is correct.
What magnitude of the net force acting during the interval?The total amount of forces exerted on an object is referred to as its net force. The product of the object's mass and its acceleration gives the amount of net force that is acting on the object.
An object is not speeding and is said to be in an equilibrium state if there is zero net force acting on it. The magnitude of a force is its measurement or intensity. The magnitude of the net force is the resultant force, which is the total of all forces acting on a body.
Therefore, The magnitude of the net force acting during interval C is greater than that during A.
Learn more about magnitude here:
https://brainly.com/question/29842247
#SPJ4
The amount of net force acting on an item is equal to the object's mass times its acceleration. An object is not speeding and is said to be in an equilibrium state if there is zero net force acting on it. Thus, option B is correct.
What magnitude of the net force acting during the interval?The total amount of forces exerted on an object is referred to as its net force. The product of the object's mass and its acceleration gives the amount of net force that is acting on the object.
An object is not speeding and is said to be in an equilibrium state if there is zero net force acting on it. The magnitude of a force is its measurement or intensity. The magnitude of the net force is the resultant force, which is the total of all forces acting on a body.
Therefore, The magnitude of the net force acting during interval C is greater than that during A.
Learn more about magnitude here:
brainly.com/question/29842247
#SPJ4
know that a mains circuit constant of a one wire,, a neutral wire and a earth wire and explain why a switch must be connected to the line wire for the circuit to be switched off safely
A switch must be always connected to the circuit to prevent the current through the appliances. Otherwise all the connections goes live.
What is electrical switches ?Electrical switches are safety devices used to on and off the current flow through the appliances. A switch or a fuse's function is to open or close an electric circuit, however in a home, they must be properly wired.
A switch or a fuse is always attached to the live wire in an electrical circuit to ensure that the socket or appliance is not live when it is shut off.
The electrical appliance is still linked to the high voltage live wire if the switch or fuse is installed in the neutral wire, even if it is open or the fuse has blown. If the user contacted the interior of the device as a result, they may receive an electric shock.
Find more on electrical switches:
https://brainly.com/question/2201104
#SPJ1
what force, in newtons, must you exert on the balloon with your hands to create a gauge pressure of 55 cm h2o, if you squeeze on an effective area of 48 cm2? assume the pressure in the balloon is one atmosphere before you squeeze.
A force of approximately 339,872 N to create a gauge pressure of 55 cm H2O, if you squeeze on an effective area of 48 cm^2.
The tension contrast can be determined as follows:
ΔP = (55 cm H2O) * (1 atm/760 cm H2O) * (101325 Dad/1 atm) = 7079 Dad
What's more, the power can be determined as:
F = ΔP * A = 7079 Dad * 48 cm^2 = 339,872 N
To work out the power expected to make a measure strain of 55 cm H2O, you want to initially change over the tension distinction into SI units (Pascals). This should be possible by increasing 55 cm H2O by a transformation figure that considers the connection between cm H2O and environments, and among climates and Pascals. Subsequent to changing over completely to Pascals, the power can be determined by increasing the tension distinction by the compelling region of the inflatable. The power is equivalent to the strain contrast duplicated by the region, so a bigger region will require a more modest power to create a similar tension.
To learn more pressure and force, refer:
https://brainly.com/question/14038099
#SPJ4
A smart refrigerator can use _____ to detect when you are running low on milk, and then send a reminder to you on a wireless network. A- Navigation systemsB - TransistorsC - KiosksD - Sensors
A smart refrigerator can use sensors to detect when you are running low on milk, and then send a reminder to you on a wireless network.
A smart refrigerator is a type of technology that utilizes sensors to monitor and manage the contents inside the refrigerator. One of its key features is the ability to detect when you are running low on a specific item, such as milk. This is done by using sensors that monitor the level of milk in the container. Once the milk level drops below a certain threshold, the refrigerator sends a reminder to you through a wireless network, such as Wi-Fi. This reminder can be in the form of an app notification, text message, or email. This helps you keep track of the items in your refrigerator and ensures that you never run out of milk unexpectedly. The smart refrigerator is a convenient and practical solution for managing your food inventory and keeping your life organized.
Find out more about Refrigerator
brainly.com/question/15385545
#SPJ4
an instrument that measures and displays electrical impulses
An instrument capable of measuring and displaying electrical impulses is the Electrocardiogram (EKG). That instrument using electrodes placed on the skin.
In the term of science, Electrocardiography generally can be defined as the process of producing an electrocardiogram, a recording of the heart's electrical activity. Electrocardiography also can be defined as an electrogram of the heart which is a graph of voltage versus time of the electrical activity of the heart using electrodes placed on the skin. The main principle of EKG or Electrocardiogram is by records impulses to show how fast the heart is beating, the rhythm of the heartbeat (steady or irregular), and the strength and timing of the electrical impulses as they move through different parts of the heart.
Here you can learn more about electrocardiogram https://brainly.com/question/11417041
#SPJ4
1. To find the value for the permeability of free space, first convert your slope from gauss units to tesla units by using the following conversion (1 gauss = 10?4 tesla). .00035 teslas
The value for the permeability of free space is 0.00035 tesla.
What is tesla.Tesla is a unit of measurement used to measure the strength of a magnetic field. It is named after the Serbian-American inventor and electrical engineer Nikola Tesla. The tesla is defined as the strength of a magnetic field that will induce an electric current of one ampere in one linear metre of a wire when the field is changing at a rate of one weber per second. This unit is used in a variety of applications such as measuring the strength of magnetic fields produced by electromagnets, measuring the strength of Earth’s magnetic field, and measuring the strength of a magnetic field produced by a superconductor. One tesla is equal to 10,000 gauss, which is the magnetic field strength used to describe the Earth’s magnetic field. Lag free is a term used to describe a system that is not subject to delays or pauses.
To convert from gauss units to tesla units, use the conversion factor of 1 gauss = 10^-4 teslas. Thus, the slope of 0.35 gauss is equivalent to 0.00035 teslas.
To learn more about tesla
https://brainly.com/question/18296538
#SPJ4
the direction of a vector can be different in different coordinate systems. T/F
The direction of a vector can be different in different coordinate systems. So the statement is true.
The direction of a vector is characterized as the line that goes from the starting point to the terminal point of the vector. In various coordinate frameworks, a similar vector might have different starting and terminal points, and hence, various directions.
The direction of a vector is compared with the coordinate framework used to address it. In this way, a vector might have an alternate direction in one coordinate framework contrasted with another.
The greatness of a vector is a scalar worth that addresses the length of the vector and is free of the coordinate framework used to manage it.
To learn more about the direction of a vector:
https://brainly.com/question/27854247
#SPJ4
assume that you reduce v0 back to 2 v and switch the trigger polarity switch polarity switch from ""+"" to ""-"" without changing the trigger level dial. what are v and wt when the scope is triggered now?
When the amplitude of the wave is reduced back to 5V and the trigger slope polarity is switched from '+' to '-', the scope will still trigger at 2.5V. The phase of the wave when the scope is triggered will be changed from 30 degrees to 180-30=150 degrees. So, the values of V and t when the scope is triggered will be V=2.5V and t=150 degrees.
An oscilloscope trigger determines the starting point of the waveform trace on the screen. In this problem, a sine wave with an amplitude of 5V and a frequency of 5kHz is being displayed. The trigger is set to start the trace when the voltage is 2.5V and the phase is 30 degrees. If the amplitude is reduced back to 5V and the trigger slope polarity is switched from "+" to "-", the trigger level remains the same at 2.5V. Hence, the scope will still trigger when the voltage is 2.5V. The phase at which the scope is triggered can be found using the formula for a sine wave and the inverse sine function.
Learn more about radio waves here: brainly.com/question/21995826
#SPJ4
Use the formulas below to match the number to how many of each element are present. (i.e. There are 2 Aluminum and 3 Oxygen present in Aluminum oxide Al2O3)
Bromine: Br2
Lithium Sulfide: Li2S
Silicon Hydride: SiH4
Magnesium Phosphide: Mg3P2
Sodium Carbonate: Na2CO3
PLEASE HELP!! And PLEASE be accurate!!! Thank you very much!!
Alumunium has an atomic number (Z) of 13 So, its electronic configuration is [Ne] 3s2 3p1 Hence, it needs to lose 3 electrons to attain stable configuration, hence its valency is three. Oxygen has an atomic number (Z) of 18 So, its electronic configuration is [He]2s23p1.
How many oxygen molecules does Al2O3 exist?This formula's subscripts (2 and 3) indicate how so many atoms will make up each unit of a compound.The 2 denotes the presence of two aluminum atoms and the 3 denotes the presence of three oxygen atoms.
How many atoms and elements are there in the formula al2 co3 3?So there's also aluminum, plus carbon now and nine oxygens.Therefore, the sum of the atoms is two + three plus nine, which equals 14.In the formula given after the molecule, there are therefore 14 atoms.The issue has now been resolved.
To know more about atomic number visit:
https://brainly.com/question/18460120
#SPJ1
a copper wire that is 3.14 m long with a diameter of 2 cm has an electrical resistance of 10 ohms. if this wire is cut exactly in half (equal lengths), what is the electrical resistance of each wire piece?
The resistance is 20 ohms.
The resistance of a wire is inversely proportional to its cross-sectional area. When the wire is cut in half, the area is also halved.
Therefore, the resistance of each wire piece is double the original resistance:
R = 10 ohms x 2 = 20 ohms
What is resistance?
Resistance is a force that opposes the motion of an object or the flow of an electric current. It is measured in ohms and can be found in electrical and electronic circuits. Resistance is caused by the collisions of electrons with atoms. It can also be caused by the movement of electrons through a material, like a metal wire. Resistance can be decreased by increasing the cross-sectional area of the conductor or by decreasing the resistance of the material. It can also be decreased by decreasing the length of the conductor.
Therefore, resistance is 20 ohms.
To learn more about resistance
Here: https://brainly.com/question/17563681
#SPJ4
a three-phase squirrel-cage motor is connected to a 60-hz line. the fullload speed is 870 rpm. how many poles per phase does the stator have?
The number of poles per phase in the stator of a three-phase squirrel-cage motor can be determined from its full-load speed and the frequency of the line it is connected to.
The full-load speed of a three-phase squirrel-cage motor is the speed at which the motor operates when it is loaded to its maximum rated capacity. The frequency of the line it is connected to is the frequency of the alternating current (AC) power supply that it is using.
The relationship between the speed of a three-phase motor and its frequency and number of poles can be determined using the following formula:
Speed (in RPM) = (120 * frequency) / number of poles
Using the given information, we can calculate the number of poles in the stator as follows:
870 RPM = (120 * 60 Hz) / number of poles
Solving for the number of poles, we get:
number of poles = (120 * 60 Hz) / 870 RPM = 8 poles per phase
To learn more about speed, visit:
https://brainly.com/question/28224010#
#SPJ11
How do you convert polar coordinates to normal coordinates?
how many m/s is 50 mi/h equivalent to? (1 mi = 1609 m.)
22m/s
What is velocity?The vectorial expression of velocity is the movement in space-time of an object or particle. The metre per second (m/s) is the accepted unit of velocity magnitude (also known as speed). Alternately, the magnitude of velocity can be expressed in centimetres per second (cm/s).Velocity can be defined as the rate at which something moves in a specific direction. as the speed of a car driving north on a highway or the pace at which a rocket takes off. By dividing the amount of time it took the object to go a certain distance by the overall distance, one can calculate the object's initial velocity. Therefore, V is the velocity, d is the distance, and t is the time in the equation V = d/t.
50 miles per hour is equal to 50 (mi/h) x 1609 (m/mi) / 1 (h/3600 s) = (50x1609/3600) m/s.
=22m/s
Use this equation to convert a mile to a metre: mi X 1,609.344= m (miles multiplied by 1,609.344 equals meters). .
To know more about velocity, visit:
https://brainly.com/question/18084516
#SPJ4
According to the question the m/s is 50 mi/h equivalent to 22m/s
What is velocity?
The vectoral expression of velocity is the movement in space-time of an object or particle. The metre per second (m/s) is the accepted unit of velocity magnitude (also known as speed). Alternately, the magnitude of velocity can be expressed in centimetres per second (cm/s).Velocity can be defined as the rate at which something moves in a specific direction. as the speed of a car driving north on a highway or the pace at which a rocket takes off. By dividing the amount of time it took the object to go a certain distance by the overall distance, one can calculate the object's initial velocity. Therefore, V is the velocity, d is the distance, and t is the time in the equation V = d/t.
50 miles per hour is equal to
50 (mi/h) x 1609 (m/mi) / 1 (h/3600 s) = (50x1609/3600) m/s.
=22m/s
Use this equation to convert a mile to a metre:
mi X 1,609.344= m (miles multiplied by 1,609.344 equals meters). .
To know more about velocity, visit:
brainly.com/question/18084516
#SPJ4
What power is dissipated in the internal resistance of the battery?
The power dissipated in the internal resistance of the battery is equal to the product of the current flowing through the battery and the voltage drop across the internal resistance.
Every battery has an internal resistance, which causes a voltage drop when current flows through the battery. This voltage drop results in a loss of energy in the form of heat, which is known as the power dissipation in the internal resistance of the battery.
The amount of power dissipated in the internal resistance is directly proportional to the current flowing through the battery and the internal resistance. The higher the current and internal resistance, the more power is dissipated, which can reduce the overall efficiency of the battery and shorten its lifespan.
To maximize the efficiency of a battery, it is important to minimize its internal resistance and choose a battery with low internal resistance.
To know more about internal resistance click on the link below:
https://brainly.com/question/15106247#
#SPJ11
A system at a temperature of 20ºC is near another system at a temperature of 60ºC, as shown in the figure. The systems are isolated from the outside world but not from each other.
a. Predict how the thermal energy of each system will change if they are moved so that they touch.
b. Explain why this will happen.
If the two systems are brought into contact, their thermal energy will adjust so that the total thermal energy remains constant and the temperatures of the systems will approach a common value that is somewhere between 20ºC and 60ºC.
b. This happens due to the transfer of heat energy from the higher temperature system to the lower temperature system until both systems reach a common temperature. Heat naturally flows from hot to cold, until the two temperatures are equal. This process is known as thermal equilibrium, and it is driven by the second law of thermodynamics, which states that heat will always flow from hot to cold until a state of thermal equilibrium is reached.
Find out more about Heat Energy and Thermal energy
brainly.com/question/7141768
#SPJ4
7 types of electromagnetic waves from lowest to highest wavelength?
Radio waves, Microwaves, Infrared radiation, Visible light, Ultraviolet radiation, X-rays, Gamma rays are 7 types of electromagnetic waves from lowest to highest wavelength.
The energy levels, wavelengths, and frequencies of the photons that make up each region of the electromagnetic (EM) spectrum are distinctive. The strongest, shortest, and most energetic gamma rays are also the most energetic. As opposed to other forms of EM radiation, radio waves have the lowest energy, the longest wavelengths, and the lowest frequencies. The parts of the electromagnetic spectrum are designated as follows, from highest to lowest energy: gamma rays, X-rays, ultraviolet radiation, visible light, infrared radiation, and radio waves. The radio wave region of the electromagnetic wave spectrum includes microwaves (such as those found in microwave ovens).
Learn more about electromagnetic wave
brainly.com/question/29774932
#SPJ4
A 63.0 kg astronaut is at rest in the middle of space. The astronaut throws a spare 10.0 kg oxygen tank in a direction away from the shuttle with a speed of 12.0 m/s. What is the final speed of the astronaut after she throws the oxygen tank?
Show your equation
A 2kg crate ret on the floor. How much work i required to move it at contant peed 3m a frictionle air table,
When mass and velocity are given the work done is the change in kinetic energy . Here the work done to move the crate will be will be 9 J.
Here a crate of 2 kg is resting on the floor. Work should be done to move the object at a constant speed. When mass and velocity are given, because here the object is attaining kinetic energy, the work done will be the change in kinetic energy.
As the object was at rest, the initial kinetic energy will be 0.
Work done, W = [tex]\frac{1}{2} mv_{2} ^{2} -\frac{1}{2}mv_{1} ^{2}[/tex]
v₁ = 0 , so the second term becomes 0.
W = [tex]\frac{1}{2}mv_{2}^{2}[/tex]
= 1/2 ×2×3² = 9 J.
Since crate is moving on a frictionless surface, we can ignore the frictional force.
So the work done to move a 2 Kg crate over a frictionless surface at a speed of 3m/s is 9 J.
For more information regarding work and energy, kindly refer
https://brainly.com/question/17290830
#SPJ4
25. The distance between two successive crests in a wave is 1.5 m, and the source generates 50 crests and 25 troughs in 10.0 s. What is the speed of the waves? Please explain to me, Thank You!
Because the frequencies is the "numbers of waves per second" and the wavelengths is the "distance each wave," multiplying the two results in "distance per second." Dimensional analysis can be used to confirm this.
How can you determine the wave speed?Wave speed and wavelength are related by the wave speed equations (Speed => Wavelength x Frequency). The wave speed can be determined using this equation if the wavelengths and frequency are known. The numbers of waves that travel each second is known as the wave frequency.
What is the wave example's speed?The speed of a sea waves is 3 m/s if the wave's crest covers 30 meters in 10 seconds. In contrast hand, if the ocean wave's peak moves 40 meters in ten seconds, then the wave is moving at a pace of 4 meters per second.
To know more about wavelengths visit:
https://brainly.com/question/1263539
#SPJ1
what is the sign of the charge on the yellow sphere? Positive or negative
The net electric force on the blue sphere has a magnitude F and is directed in the y direction, the sign of the charge on the yellow sphere will be negative.
What is electric force?Electric force is described as the repulsive or attractive interaction between any two charged bodies. Electric force just like any other force, its impact and effects on the given body are described by Newton's laws of motion.
The distance between the two spheres, the magnitude of the charges, and the direction of the force between them would be factors that will help us determine the the sign of the charge on the yellow sphere.
Learn more about electric force at: https://brainly.com/question/25923373
#SPJ1
how do you determine the largest net driving force
The largest net driving force is determined by comparing the magnitude of all force acting on a system and choosing the one with the greatest value.
The largest net driving force is a crucial concept in physics and thermodynamics. It refers to the net force that drives the change in a system, such as chemical reactions or physical processes.
The magnitude of all forces acting on a system, such as friction, gravity, or pressure, must be compared to determine the largest net driving force. The force with the greatest value is considered to be the largest net driving force and will have the most significant effect on the system.
To know more about Force, click here.
https://brainly.com/question/13191643
#SPJ4