A 500 mL flask is filled with krypton (Kr) at STP. How many moles of Kr are present?

Empirical method.It is the compound's most straightforward formula.The simplest whole number ratio of various atoms is contained in this formula. As a result, 12 + 2 * 1 + 16 = 30.Then we figure that 90/30 = 3.The final product is 3*(CH2O) --> C3H6O3.

To learn more about empirical formula refer

https://brainly.com/question/1603500

#SPJ1

Polymerization reactions are chemical reactions in which simple monomers are joined together to form a more complex polymer. These reactions are an important aspect of materials science and have many applications in industries such as plastics, textiles, and coatings.

One important aspect of polymerization reactions is that they are often exothermic, meaning that they release heat as they proceed. This can lead to an increase in the temperature of the reaction mixture, which can have a significant impact on the reaction kinetics and the resulting polymer properties.

To control the temperature during polymerization, it is often necessary to stir the reaction mixture. Stirring helps to distribute heat evenly throughout the mixture and to prevent local hot spots from forming, which can result in the production of lower-quality polymers. In addition, stirring helps to ensure that the reactants are well mixed and that the reaction proceeds at a consistent rate.

However, there may be situations where stirring is not appropriate or necessary for a polymerization reaction. For example, some polymerization reactions proceed at a low rate and do not generate enough heat to pose a temperature control issue. In these cases, stirring may not be necessary and can actually hinder the reaction by breaking up the growing polymer chains. Additionally, in some cases, the polymerization reaction may need to be conducted under an inert atmosphere, such as nitrogen or argon, and stirring could introduce air into the reaction mixture and interfere with the reaction.

In conclusion, whether or not to stir a polymerization reaction depends on the specific reaction conditions, including the reactants, the desired rate of reaction, and the amount of heat generated. An understanding of the reaction kinetics and the potential impact of stirring on the reaction is essential to making informed decisions about whether or not to stir a polymerization reaction.

Here you can learn more about the polymerization reaction

https://brainly.com/question/3775111#

#SPJ11

Answer:

Because it has 2 protons

Explanation:

Answer:

Helium is a chemical element. Its official symbol is He, and its atomic number is 2, which means it has two protons in its nucleus.

Carbon (C) and nitrogen (N) atoms make up the Empirical formula of the cyanide [CN]- ion. Three covalent bonds hold the two atoms together.

base Lewis The valence electron pairs on the atoms of carbon and nitrogen are not involved in bonds. The carbon atom's non-bonding pair is easily transferrable to an atom on a Lewis acid that lacks an electron. The hydrogen anion is therefore categorized as a Chelating agent.

In contrast, most quasi atoms have a stronger tendency to draw electrons than do metallic atoms, which results in the formation of electron ions. Both the nitrogen and the carbon atoms have an ion, or negative charge. is an ambident ion, and the atoms of both carbon.

To know more about valence electron visit :

https://brainly.com/question/28977387

#SPJ4

Nicolaus Copernicus is considered the father of modern astronomy for his pioneering heliocentric model of the solar system, placing the Sun at its center and marking a significant departure from the earlier geocentric model.

The individual considered the father of modern astronomy is none other than Nicolaus Copernicus. He was a Polish astronomer who proposed the heliocentric model of the solar system. This model proposed that the Sun is at the center of our solar system and the planets, including Earth, orbited around it. This theory marked the beginning of modern astronomy as it challenged the previously accepted geocentric model where Earth was considered as the center of the universe.

Galileo Galilei and Sir Isaac Newton were also key figures in the development of astronomy, but it was Copernicus's idea which represented the true dawn of modern astronomy. Leonardo da Vinci, while a genius in his own right, is not primarily associated with the field of astronomy.

https://brainly.com/question/32157909

#SPJ1

The formal charge of an atom in a molecule is the charge an atom would have if the electrons in the bonds were shared equally between the atoms.

It is calculated by subtracting the number of valence electrons that an atom has in its neutral state from the number of electrons assigned to that atom in the molecule.

A. 0,-2 refers to the formal charge on carbon in structure A and -2 refers to the formal charge on the same carbon in structure B.

B. 0,0 refers to the formal charge on the carbon in structure A and 0 refers to the formal charge on the same carbon in structure B.

C. +2,-2 refers to the formal charge on the carbon in structure A and -2 refers to the formal charge on the same carbon in structure B.

D. +1,-1 refers to the formal charge on the carbon in structure A and -1 refers to the formal charge on the same carbon in structure B.

To learn more about formal charge please click on below link.

https://brainly.com/question/11723212

#SPJ4

What is the formal charge on carbon atom in the following two structures are?

A. 0,-2B.

B. 0,0C.

C. +2,-2D.

D. +1,-1

Health care teams that are made up of professionals like therapists, lab professionals, and imaging professionals support the core team. These teams are called "Ancillary teams."

The following are some teams in Health care:

Healthcare administrative teams include some groups. The first group is composed of certain institutions, such as clinics, hospitals, and home health organizations. Second, specific departments or units, include cardiac care units, critical care units, and emergency rooms. Third, specialized clinical fields include cardiology, physical therapy, and nursing. Finally, particular issues like personnel, facility management, admissions, and financing

Health care teams that are made up of professionals like therapists, lab professionals, and imaging professionals support the core team.

Teams include administrators, accounting departments, billing personnel, and human resources professionals.

The individual and those involved in his or her care are referred to as the Support Team. Family, friends, doctors, nurses, LTCWs, social workers, and vocational vendors may all be part of the support team.

Here to learn more about Teams in Patient Care:

https://brainly.com/question/14171987

#SPJ4

Answer: 10

Explanation:

"To compare two earthquakes in terms of shaking, you subtract one magnitude from the other and raise 10 to that power: 10^(M1-M2)." (from science.org).

So, comparing a magnitude 8 and 7 earthquake,

8-7=1.

the stronger earthquake shakes 10^1 or 10 times as hard as the milder one.

The solubility that is required is 2.34 * 10^-3 M

We would need to apply the Henry's law so as to obtain the solubility of the gas and we know that from the Henry's law that we can be able to write that;

S = kP

S = solubility

K = Henry constant

P = Partial pressure

Thus we have that;

k = S/P

= 5.85 x 10^-4 /0.45

= 1.3 * 10^-3

Th we have that when the partial pressure is four times;

S =  1.3 * 10^-3 * 4(0.45)

S = 2.34 * 10^-3 M

The solubility of the gas is 2.34 * 10^-3 M

Learn more about solubility:https://brainly.com/question/28170449

#SPJ1

No, sigma bonds result from the overlap of orbitals in two regions of space.

Sigma and the pi bonds are basically two types of covalent bonds which differ in the overlapping of the atomic orbitals. Covalent bonds are formed as a result of the overlapping between the atomic orbitals. Sigma bond is formed by a head-on positive or the same phase overlap of the atomic orbitals along the internuclear axis.

Sigma bonds are basically the strongest covalent bonds as a result of the direct overlapping of the participating orbitals. The electrons which are participating in a σ bond are  referred to as σ electrons. These bonds are formed as a result of the overlap of the orbitals in two regions of space. Generally, all of the single bonds are sigma bonds.

To know more about sigma bonds here

https://brainly.com/question/28986061

#SPJ4

The variety of crystal habits in pyrite is due to a combination of factors including temperature, pressure, the presence of other minerals, and the rate of cooling during its formation. The different crystal habits can provide clues to the conditions that were present during its formation, making pyrite an interesting mineral to study for geologists and mineralogists.

Mineral pyrite, also known as iron sulfide, is a common mineral found in many different types of rocks and ore deposits. One of the interesting characteristics of pyrite is that it can have several different crystal habits, or forms, that can develop based on different growth conditions. In this text, we will discuss the reasons behind the variety of crystal habits of pyrite.

The crystal habit of a mineral is largely determined by the physical and chemical conditions that were present during its formation. This can include factors such as temperature, pressure, the presence of other minerals, and the rate of cooling. When these conditions change, the crystal structure can be affected, leading to the development of different crystal habits.

In the case of pyrite, different crystal habits can be found due to variations in the conditions of its formation. For example, pyrite can form as cubic crystals in high-temperature and high-pressure environments, where the mineral has enough time to grow into its typical cubic shape. In contrast, pyrite can also form as bladed or prismatic crystals in low-temperature and low-pressure environments, where the mineral does not have enough time to grow into its full cubic shape.

Additionally, the presence of other minerals can also influence the crystal habit of pyrite. For example, when pyrite is found in association with minerals such as quartz or calcite, it can grow as flattened or tabular crystals. This is because the presence of these other minerals restricts the growth of pyrite, forcing it to take on a different crystal shape.

Here you can learn more about pyrite

https://brainly.com/question/13435246#

#SPJ11

The material which is most effective in washing off explosive residue is referred to as acetone and is therefore denoted as option D.

This is referred to as a substance or device that can be made to produce a volume of rapidly expanding gas in an extremely brief period.

Explosive residue which is referred to as fragments of a container in which the residue corresponds to the shell of the container usually have most plastic type of stains that cannot be dissolved by other dryside agents. Acetone on the other hand is used to reduce or even remove many difficult stains such as paints, and the residues which is therefore the reason why it was chosen as the correct choice.

Read more about Explosive here https://brainly.com/question/16551803

#SPJ1

The half-life of a first-order reaction can be calculated using the equation: t1/2 = ln(2) / k

where k is the rate constant and t1/2 is the half-life. Plugging in the values, we get:

= t1/2

= ln(2) / 0.042 min^-1

= 16.44 min

So the first-order reaction half-life of the reaction is 16.44 minutes.

Next, we can use the equation for the concentration of a first-order reaction over time:

= C

= C0 x e^(-kt)

where C is the concentration at time t, C0 is the initial concentration, k is the rate constant, and t is the time.

The initial concentration of H2O2 is 3.00 M, so:

= C

= 3.00 M x e^(-0.042 min^-1 x 40.0 min)

= 0.435 M

So after 40.0 minutes, 0.435 M of H2O2 is left.

To find out how long it takes for the concentration of H2O2 to decrease to 0.100 M, we can rearrange the equation and solve for t:

= t

= -ln(C/C0) / k

= -ln(0.100 M / 3.00 M) / 0.042 min^-1

= 147.1 min

So it will take 147.1 minutes for the concentration of H2O2 to decrease to 0.100 M.

To know more about first-order reaction please refer:

https://brainly.com/question/12446045

#SPJ4

Answer:

To ensure the most accurate mass reading when using a properly stabilized balance, you should:

This roadmap provides the steps for converting the volume of the acid to the molarity of the base in an acid-base titration.

The roadmap for converting volume of acid to molarity of base for an acid-base titration can be broken down into the following steps:

Measure the volume of the acid in liters (L).

Determine the amount of the acid in moles (mol) by multiplying the volume by the concentration (mol/L) of the acid.

Calculate the moles of base required to neutralize the acid by multiplying the amount of acid by the stoichiometric ratio of base to acid in the reaction.

Determine the volume of the base in liters (L) by titrating the acid.

Calculate the molarity (mol/L) of the base by dividing the amount of base (mol) by the volume (L) of the base.

Learn more about acid-base titration here: brainly.com/question/2728613

#SPJ4

The difference between liquids A and B can be determined by looking for differences in one or more of their physical properties.

Physical properties that could be used to compare the two liquids include density, viscosity, surface tension, boiling point, freezing point, solubility, and refractive index. By measuring the values of these properties for each liquid, one can compare them to determine if there is a difference between the two. For example, if liquid A has a higher density than liquid B, then it is denser. If liquid A has a higher viscosity than liquid B, then it is more viscous. If liquid A has a higher surface tension than liquid B, then it is more surface active. By comparing the values of these physical properties, one can determine the differences between liquids A and B.

Read more about the Physical properties of liquids:

https://brainly.com/question/26254755

#SPJ4

The immiscible solvent from the given solvent pairs is:

The miscible solvents from the given solvent pairs are;
dichloromethane and water

Soluble solvents are solvents that dissolve in water. Soluble solvents are polar substances and easily form hydrogen bonds with water molecules.

Insoluble solvents are solvents that do not dissolve in water. Insoluble solvents are non-polar substances and do not form hydrogen bonds with water molecules.

Learn more about soluble and insoluble solvents at: https://brainly.com/question/29046275
#SPJ1

56.98 g of solid KF should be added to 1.00 L of 0.250 M HF to make a buffer with a pH of 3.143.

In order to make a buffer with a pH of 3.143, we need to determine the concentrations of both the weak acid (HF) and its conjugate base (KF).

The pH of a buffer can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pKa is the negative log of the acid dissociation constant (pKa = 3.143 for HF), [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.

In this case, we have 1.00 L of 0.250 M HF and we want to add KF to make the buffer. The molar mass of KF is 58.1 g/mol, so we can calculate the number of moles of KF needed to make the buffer:

moles KF = (1.00 L) * (0.250 M) / (58.1 g/mol) = 0.0429 moles

Since KF acts as a base in this solution, it will react with HF to form the conjugate base, F-. The concentration of the conjugate base will be equal to the moles of KF added:

[A-] = moles KF / (1.00 L) = 0.0429 moles / (1.00 L) = 0.0429 M

Finally, we can plug in these values into the Henderson-Hasselbalch equation:

pH = 3.143 + log([A-]/[HA]) = 3.143 + log(0.0429 M / 0.250 M) = 3.143

To learn more about solid, visit:

https://brainly.com/question/17061172#

#SPJ11

You can use chemical formulas to determine if a change is either chemical or physical by looking for changes in the number and type of atoms in the reactants and products.

Learn more about chemical and physical at: https://brainly.com/question/11370755

#SPJ4

If water is added to a 0.70 molar solution of CuSO4, the molarity will decrease and the amount of CuSO4 will decrease.

Then the correct answer is: B. Molarity will decrease

This is because the addition of water increases the volume of the solution, and as the volume increases, the concentration of the CuSO4 decreases.

Molarity is a measure of the concentration of a solution. It is defined as the number of moles of solute per liter of solution. For example, if you dissolve 1 mole of sodium chloride (NaCl) in 1 liter of water, the resulting solution would have a molarity of 1 M.

Learn more about chemical solutions:

https://brainly.com/question/30077698
#SPJ4

(a) The rate equation is rate = k [NO]x [NO3]y for the reaction NO (g) + NO3 (g) 2 NO2(g).
(b) The reaction (CH3)hBr (aq) (CHs)3C+ (aq) + Br (aq) has the following rate equation: rate = k [CH3CH2Br]z

An formula that explains how a reaction's rate relies on the concentrations of its reactants is called the rate law of a reaction. Typically, the rate law is defined in terms of the reaction rate (rate), the rate constant (k), and the concentrations of the reactants increased to a certain power (x, y, z, etc.). Experiments are used to identify the exponents (x, y, z, etc.), which show the reaction's progression with regard to each reactant. A single-step reaction is considered an elementary reaction.

Learn more about rate equation here:

https://brainly.com/question/12552134

#SPJ4

The molar concentration of nitrate ions in solution of 0.083 moles of lead(ii) nitrate and water is equals to the 0.1464 mol/L.

The term molar concentration with the help of which interconversion between species moles and solution's volume is possible. It can also be used in charged species such as ions as well as solutions that are being diluted.

Number of moles of lead(ii) nitrate, n

= 0.083 mol

Volume of solution, V = 567 mililiter

Convert the units from mililiter to liter :

567 mililiter = 567/1000 L

The molar mass of, Pb(NO₃)₂= 332.2 g/mol

The molar concentration, M = number of moles of solute/ Volume of solution

Since L and the mol is known so,

M = 0.083 mol/567/1000 L

=> M = 0.1464

Hence, the molar concentration is 0.1464 mol/L.

To learn more about molar concentration, refer:

https://brainly.com/question/14923826

#SPJ4

Answer: C

Explanation:

Rutherford's Gold Foil Experiment

These were his conclusions.

The neutralization of acidic chyme as it enters the small intestine is an important function of bicarbonate, a substance produced by the pancreas.

The mixture of partially digested food that exits the stomach and travels to the small intestine is known as chyme. Due to the hydrochloric acid produced by the stomach, which aids in the breakdown of food, it has a low pH. However, if the chyme is overly acidic, it may irritate the small intestine's walls and cause digestive issues. In order to stop this from happening, the pancreas secretes bicarbonate, which balances the chyme's acidity and raises its pH to a level less damaging to the intestinal walls. The chyme's hydrochloric acid and bicarbonate react to create carbonic acid, which breaks down into water and carbon dioxide very quickly.

The chyme's acidity is neutralized by this process, enabling the small intestine to digest and absorb nutrients more effectively.

Learn more about chyme:

brainly.com/question/15452957

#SPJ4

Answer:

The electron configuration of a noble gas is achieved when an atom has a full valence shell of electrons, which is typically 8 electrons for the elements in the noble gas group.

In a molecule of Br2, the bromine atoms have an electron configuration of [Ar]3d104s24p5, where [Ar] represents the electron configuration of argon, a noble gas. To achieve a noble gas electron configuration, one more electron must be added to the valence shell, which is the fourth energy level.

So, the electron configuration of a bromine atom in Br2 can be expressed as [Ar]3d104s24p6, which is the electron configuration of neon, another noble gas. This configuration has a full valence shell of 8 electrons, which is characteristic of the noble gas electron configurations.

Explanation:

The moles of nitrogen atoms does represent in 41.3 grams of N₂H₄ = 1.288 moles

To determine moles of nitrogen, we have to find the molar mass first.

We only need to add the average molar masses of the atoms that make up hydrazine to determine its molar mass. Since there are two nitrogen atoms and four hydrogen atoms in a molecule of hydrazine, we will multiply the molar masses of nitrogen and hydrogen by two and four, respectively.

The molar mass of nitrogen:

= (2 x 14.01) + (4 x 1.008)

= 32.0452 g/mol

Hence, moles of nitrogen atoms = mass of nitrogen atoms / molar mass of nitrogen atoms

= (41.3 gr) / (32.0452 g/mol)

= 1.288 moles

Learn more about moles here: brainly.com/question/30337481

#SPJ4

The appropriate way to ask a teacher for help is C. Would you show me how to set up an equation to convert grams to moles?

Teaching can be summed up as interaction with students that enables their comprehension and application of facts, ideas, and procedures. Design, content selection, delivery, evaluation, and reflection are all included.

Hence, it can be seen that when a student has a confusion in class, he or she can always ask a teacher for help and the above is a good example of it.

Read more about teaching here:

https://brainly.com/question/25887038

#SPJ1

The volume of a gas at STP is defined as 22.4 liters per mole. So, 5.50 moles of CO2 at STP would occupy a volume of:

5.50 moles * 22.4 liters/mole = 123.4 liters

The equation used to calculate the volume of a gas at standard temperature and pressure (STP) is V = nRT/P, where V is the volume, n is the number of moles, R is the gas constant, T is the temperature in Kelvin, and P is the pressure in atmospheres. This equation assumes that the gas is behaving ideally, meaning that its pressure, volume, and temperature are directly proportional to one another. By using this equation, we can calculate the volume of a gas at STP given the number of moles and its pressure and temperature. This equation is commonly used in chemistry and physics to predict the behavior of gases under specific conditions.

To know more about STP visit: https://brainly.com/question/1542685

#SPJ4

In the fermentation of sugar to make ethanol and CO2, 1 mole of glucose (C6H12O6) reacts with 6 moles of oxygen to produce 6 moles of CO2 and 2 moles of ethanol (C2H5OH).

To learn more about chemical reaction refer:

brainly.com/question/11231920

#SPJ1

The number of mols of oxygen used in this reaction is 0.5 mols of O[tex]_2[/tex]. The empirical formula of magnesium oxide will contain one Magnesium atoms to one oxygen atoms.

To keep the body's magnesium levels balanced, magnesium oxide is taken as a supplement. Additionally, magnesium oxide is employed as a laxative to treat occasional constipation as well as an antacid to cure indigestion.

A student works with a crucible weighing 35.100 g. He obtains a piece of magnesium and adds it to the crucible and weights it to obtain a new weight of 35.153 g. The student burns the magnesium with excess oxygen. The new mass is 35.162. The number of mols of oxygen used in this reaction is 0.5 mols of O[tex]_2[/tex]. The empirical formula of magnesium oxide will contain one Magnesium atoms to one oxygen atoms.

Therefore, the empirical formula of magnesium oxide will contain one Magnesium atoms to one oxygen atoms.

To learn more about magnesium oxide, here:

https://brainly.com/question/1533548

#SPJ1