During a running (dynamic) compression test at idle, a good engine should produce PSI. A. 150 to 200 B. 100 to 150 C. 30 to 60 D. 60 to 90​

Answers

Answer 1

Answer:

b

Explanation:

Answer 2

During a running (dynamic) compression test at idle, a good engine should produce PSI between 60 to 90​. The correct answer is option D.

A running compression test is a diagnostic test that measures the compression pressure of an engine while it is running.

The test is performed by connecting a compression gauge to the spark plug hole of each cylinder and then cranking the engine over to measure the compression pressure. The compression pressure of an engine is an important indicator of its overall health and performance. A low compression pressure can indicate a number of issues, such as worn piston rings, damaged valves, or a blown head gasket. On the other hand, a high compression pressure can indicate that the engine is in good condition and has strong compression.

Therefore, in general, a good engine should produce compression pressure between 60 to 90​ PSI during a running compression test at idle. Option D is the correct answer.

Learn more about compression test here:

https://brainly.com/question/22170796

#SPJ4


Related Questions


An element's atomic number refers to - (TEKS 8.5A)

Answers

Answer:

An element's atomic number refers to the number of protons found in the nucleus of each atom of the element.

Answer:

ur mom

Explanation:

ur mom lol

Show your reasoning in describing what would be the effect on the calculated equilibrium constant for each of the following mistakes.
1. Your buret was not rinsed with NaNCS solution before use and still contained traces of distilled water.
2. The spectrophotometer was set well-past infinite absorbance upon calibration with the sample holder empty.

Answers

Answer:

The readings of equilibrium constant is incorrect.

Explanation:

There is a mistake in the value of equilibrium constant if the burette contains traces of distilled water because the water will be present in the solution from which equilibrium constant is calculated. The spectrophotometer did not give the correct reading because its calibration is incorrect. If we want to gain correct readings from the spectrophotometer, we must have to calibrate the instrument correctly.

Incorrect value of equilibrium constant is obtained.

What is equilibrium constant?

Equilibrium constant of any reaction tells about the relative ration of the concentration of products to the reactants.

Value of equilibrium constant can be calculated in the aqueous medium where concentration of water also present. If we don't rinse the burette with the reaction solution then the already present traces of water affect the concentration of water during the calculation of equilibrium constant.

As the absorbance of any solution is also directly proportional to the concentration, so if the spectrometer is not calibrated accurately then incorrect value of absorbance also affects the value of equilibrium constant.

Hence, we get incorrect value of equilibrium constant for each of the given mistakes.

To know more about equilibrium constant, visit the below link:

https://brainly.com/question/12270624

A solution has a [OH-] of 1.43x10-9. What is the pH of this solution?
a. 5.2
b. 8.8
C. 9.1
d. 4.9

Answers

Answer:

a. 5.2

Explanation:

pOH = -log(1.43 x 10^-9) = 8.845

pH = 14 - pOH = 14 - 8.845 = 5.155 ≈ 5.2

ASAP pleas
Which of the following pair of elements are found as diatomic gaseous molecules in nature?

a)carbon and chlorine

b) sulfur and oxygen

c) oxygen and hydrogen

d) Nitrogen and Neon

Answers

C because there’s always hydrogen like hydro- hydrate aka water and what’s in nature streams or river and oxygen as well because of carbon dioxide found in trees

Select the correct term(s) to complete each sentence. a) The ____ is assigned a relative intensity of 100. base peak molecular ion peak b) The ____ is the most intense peak in the mass spectrum. molecular ion peak base peak c) The ____ represents the original molecule that has only lost an electron. molecular ion peak base peak d) ____ could be/represent a smaller, charged fragment of the original molecule. The base peak The molecular ion A radical cation e) ____ is/represents a positively charged species. The base peak The parent ion The molecular ion A radical cation

Answers

Answer:

a) Base Peak

b) Base Peak

c) Molecular Ion

d) Base Peak and Radical Cation

e) The Parent Ion, Molecular Ion, the Radical Cation and the Base Peak

Explanation:

a) The Base Peak is assigned a relative intensity of 100.

b) The Base Peak is the most intense peak in the mass spectrum.

c) The Molecular Ion Peak represents the original molecule that has only lost an electron.

d) Base Peak and Radical Cation could be/represent a smaller, charged fragment of the original molecule.

e) The Parent Ion, the Molecular Ion, the Radical Cation/ the Base Peak is/represents a positively charged species.

HELP FAST 100 PTSCalculate the amount of heat needed to convert 100.0 g of liquid water at 25 °C to water at 100 °C.

Answers

Answer:

31,380 Joules

Explanation:

Given Data:

Mass = m = 100 g

Temperature 1 = = 25 °C

Temperature 2 = = 100 °C

Specific Heat Constant = c = 4.184

Change in Temp. = ΔT = 100 - 25 = 75 °C

Required:

Heat = Q = ?

Formula:

Q = mcΔT

Solution:

Q = (100)(4.184)(75)

Q = 31, 380 Joules

Hope this helped!

~AH1807

Answer:

[tex]\Large \boxed{\sf 31400\ J}[/tex]

Explanation:

Use formula

[tex]\displaystyle \sf Heat \ (J)=mass \ (g) \times specific \ heat \ capacity \ (Jg^{-1}\°C^{-1}) \times change \ in \ temperature \ (\°C)[/tex]

Specific heat capacity of water is 4.18 J/(g °C)

Substitute the values in formula and evaluate

[tex]\displaystyle \sf Heat \ (J)=100.0 \ g \times 4.18 \ Jg^{-1}\°C^{-1} \times (100\°C-25\°C)[/tex]

[tex]\displaystyle Q=100.0 \times 4.18 \times (100-25 )=31350[/tex]

Calculate the pH at the equivalence point when 22.0 mL of 0.200 M hydroxylamine, HONH2, is titrated with 0.15 M HCl. (Kb for HONH2

Answers

Answer:

pH = 3.513

Explanation:

Hello there!

In this case, since this titration is carried out via the following neutralization reaction:

[tex]HONH_2+HCl\rightarrow HONH_3^+Cl^-[/tex]

We can see the 1:1 mole ratio of the acid to the base and also to the resulting acidic salt as it comes from the strong HCl and the weak hydroxylamine. Thus, we first compute the required volume of HCl as shown below:

[tex]V_{HCl}=\frac{22.0mL*0.200M}{0.15M}=29.3mL[/tex]

Now, we can see that the moles of acid, base and acidic salt are all:

[tex]0.0220L*0.200mol/L=0.0044mol[/tex]

And therefore the concentration of the salt at the equivalence point is:

[tex][HONH_3^+Cl^-]=\frac{0.0044mol}{0.022L+0.0293L} =0.0858M[/tex]

Next, for the calculation of the pH, we need to write the ionization of the weak part of the salt as it is able to form some hydroxylamine as it is the weak base:

[tex]HONH_3^++H_2O\rightleftharpoons H_3O^++HONH_2[/tex]

Whereas the equilibrium expression is:

[tex]Ka=\frac{[H_3O^+][HONH_2]}{[HONH_3^+]}[/tex]

Whereas Ka is computed by considering Kw and Kb of hydroxylamine:

[tex]Ka=\frac{Kw}{Kb}=\frac{1x10^{-14}}{9.10x10^{-9}} \\\\Ka=1.10x10^{-6}[/tex]

So we can write:

[tex]1.10x10^{-6}=\frac{x^2}{0.0858-x}[/tex]

And neglect the x on bottom to obtain:

[tex]1.10x10^{-6}=\frac{x^2}{0.0858}\\\\x=\sqrt{1.10x10^{-6}*0.0858}=3.07x10^{-4}M[/tex]

And since x=[H3O+] we obtain the following pH:

[tex]pH=-log(3.07x10^{-4})\\\\pH=3.513[/tex]

Regards!

Calculate the pH of a solution formed by mixing 550.0 mL of 0.30 M HClO with 275.0 mL of 0.20 M CsClO. The Ka for HClO is 2.9 × 10-8.

Answers

Answer:

pH = 7.08

Explanation:

We can solve this problem using Henderson-Hasselbach's equation:

pH = pKa + log[tex]\frac{[ClO^-]}{[HClO]}[/tex]

With the given concentrations and volumes, we can calculate the new values for [ClO⁻] and [HClO] when the solutions are mixed:

Total volume = 550.0 mL + 275.0 mL = 825.0 mL[HClO] = 550 mL * 0.30 M / 825 mL = 0.20 M[ClO⁻] = 275 mL * 0.20 M / 825 mL = 0.07 M

Now we calculate pKa:

pKa = -log(Ka) = 7.54

Finally we calculate the pH:

pH = 7.54 + log[tex]\frac{0.07}{0.2}[/tex] = 7.08

If energy cannot be created or destroyed, what happens to the kinetic and potential energy?​

Answers

Answer:

According to the law of conservation of energy, energy cannot be created or destroyed, although it can be changed from one form to another. KE + PE = constant. ... As the car coasts down the hill, it moves faster and so it's kinetic energy increases and it's potential energy decreases. hope this helps

Explanation:

Answer:

They cannot be destroyed or created however,

Explanation:

it can only be transformed or transferred from one form to another.

How many moles of carbon dioxide are produced using 5.8 grams of C2H2?

Answers

Answer:

50.0 moles CO2

Explanation:

I have to make this question longer so im just typing thisgjfgjfjvndfi nufnvfjnvfjnjn vnfj
(Go all the way to the bottom)












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Don't forget to drink water

Answers

Answer:

Ok, thank you

Explanation:

Which of the following phase changes is exothermic?

gas to solid
solid to liquid
solid to gas
liquid to gas

Answers

Answer:

gas to solid

Explanation:

Exothermic means the release of heat. Any transformation from a less ordered to a more ordered state releases energy. This is represented by the change of a liquid to solid, gas to liquid, or gas to solid. Vise versa endothermic is the transformation from a more ordered state to a less ordered state represented by solid to liquid, liquid to gas, and solid to gas.

what climate is Colorado in?
A.Most Subtropical Mid-Latitude
B.Polar
C.Moist ContinentaMid-Latitiude
D.Dry​

Answers

Answer:

b

Explanation:

Answer:

D. Dry

Explanation:

Colorado's combination of high elevation, midlatitude, and continental interior geography results in a cool, dry climate.

2)Explain: How can the shapes of a boat and an airplane help them move faster?

Answers

Answer:

Their sleek shape makes them more aerodynamic which reduces the contact force.

Answer: The are formed in a way so they create less friction against the air and water. Helping the jet stream create less traction so it moves faster. Like how a bullet is designed. The pointed front and narrow body helps it move faster through the air. Less things sticking of these object so friction is avoided, and they can easily move speedily. The same thing goes for cars, the more narrow they are as well as pointed makes it easier to push through the air making the wind resistance extremely low.

Hope this helps :)

A buffered solution is made by adding 50.0g NH4Cl to 1.00 L of a 0.75M solution of NH3. Calculate the pH of the final solution. (assume no volume change).

Answers

Answer:

9.15

Explanation:

To solve this problem we'll use Henderson-Hasselbach's equation:

pH = pKa + log[tex]\frac{[A^-]}{[HA]}[/tex]

For this problem:

pH = 9.25 + log[tex]\frac{[NH_3]}{[NH_4Cl]}[/tex]

Now we calculate [NH₄Cl], first by converting 50.0 g of NH₄Cl into moles using its molar mass:

50.0 g NH₄Cl ÷ 53.491 g/mol = 0.935 mol

Meaning that [NH₄Cl] = 0.935 mol / 1.00 L = 0.935 M

Finally we calculate the pH:

pH = 9.25 + log[tex]\frac{0.75M}{0.935 M}[/tex] = 9.15

The pH can be defined as the hydrogen ion concentration in the solution. The pH of ammonium chloride solution in ammonia is 9.16.

What is molarity?

The molarity is the moles of a compound in the liter of solution. The molarity of 50 grams ammonium chloride in a liter of solution is given as:

[tex]\rm Molaity=\dfrac{mass}{molar\;mass\;\times\;volume(L)} \\\\NH_4Cl\;Molarity=\dfrac{50\;g}{53.491\;g/mol\;\times\;1\;L} \\\\NH_4Cl\;Molarity=0.935\;M[/tex]

The ammonia in the solution contributes to the pH from the ammonium chloride salt. The pH can be given as:

[tex]\rm pH=pKa+log\dfrac{acid}{salt}[/tex]

The pKa of ammonia is 9.25. The concentration of ammonia is given as 0.75 M.

The pH of the solution can be given as:

[tex]\rm pH=9.25+log\dfrac{0.75\;M}{0.935}\\ pH=9.25+(-0.09)\\pH=9.16[/tex]

The pH of the solution is 9.16.

Learn more about pH, here:

https://brainly.com/question/15289741

How does temperature affect the rate constant for a reaction?

Answers

Answer:

d

Explanation:

increasing the temperature the fraction of molecules which collide with energy greater than Ea increase and hence the rate constant

Uranium, an important component of both nuclear weapons and nuclearreactors, has two major isotopes, U-238, which has a half-life of approximately billion years, and U-235, which has a half-life of approximately million years. Both were present in equal amounts at the time of thecreation of the Earth, billion years ago. How many years after the creationof the Earth had the amount of radiation from uranium decayed to half theamount present at the time of the creation of the Earth

Answers

Answer:

Hello your question is poorly written below is the well written question

Uranium, an important component of both nuclear weapons and nuclear reactors, has two major isotopes, U-238, which has a half-life of  approximately 4.5 billion years, and U-235, which has a half-life of approximately 700 million years. Both were present in equal amounts at the time of the creation of the Earth, 4.5  billion years ago. How many years after the creation of the Earth had the amount of radiation from uranium decayed to half the amount present at the time of the creation of the Earth

Answer : 140 billion years

Explanation:

Given that :

U-238   h1/2 = 4.5 billion years

U-235   h1/2 = 700 million years

At the beginning both Isotopes where present in equal amount

Determine the T years before the amount of Uranium decays to Half

T =   ?    N'2 = N1 / 2

we know that N = No ( 1/2 )^h   where h = time / half-life time

attached below is the detailed solution of the given problem

Precipitation that falls to earth sometimes soaks into the soul and becomes____.

Answers

Answer:

not sure but i think the answer is A

Calculate the Rf value of compounds X and Y based on information (X travels 0.5.0 cm, Y travels 1.0 cm from the origin line; the solvent front is 3.0 cm). Comment on the polarity and separation of X and Y on the TLC plate.

Answers

Answer:

Retention factor or [tex]R_f[/tex] value is defined as the ratio of distance traveled by the unknown to the distance traveled by the solvent front.

[tex]R_f=\frac{\text{ distance by unknown}}{\text {distance by solvent}}[/tex]

Putting in the values we get:

[tex]R_f_{X}=\frac{0.50cm}{3.0cm}=0.16[/tex]

[tex]R_f_{Y}=\frac{1.0cm}{3.0cm}=0.33[/tex]

As the [tex]R_f[/tex] value of Y is more than X , it follows that Y compound will be retained less strongly than the compound X. Thus Y is more polar than X.

can u identify a chemical equation for the saponification of olive oil as per your experiment?
I​

Answers

yes you can identify it depending on the experiment made

Of the three Intermolecular forces, the type with the largest dissociation energy is ________.
A. Dipole-dipole interactions
B. Dispersion forces
C. Hydrogen bonds​

Answers

Answer:

C. Hydrogen bonds​

Explanation:

Strongest intermolecular force

Hydrogen Bonding (H-Bonding)

Hydrogen bonds are caused by highly electronegative atoms. They only occur between hydrogen and oxygen, fluorine or nitrogen, and are the strongest intermolecular force.

Answer: C hydrogen bonds

Explanation:

The formula for ammonia is NH3. How many moles are in 0.75 g of ammonia?

Answers

I'm not sure how long the answer goes but i got it from here

The number of moles that are present in 0.75 g of ammonia is 0.04 moles.

What is the relation between mass & moles?

Relation between the mass and moles of any substance will be represented as:

n = W/M, where

W = given mass = 0.75gM = molar mass = 17g/mol

On putting all these values, we can calculate the moles of ammonia as:

n = 0.75g / 17g/mol = 0.04 mole

Hence required moles of ammonia is 0.04 moles.

To know more about moles, visit the below link:
https://brainly.com/question/1034638

#SPJ2

what is molecular attraction? Am I right?

Answers

Answer:

tendency of molecules with unlike electrical charges to attract each other.

Explanation:

l need introduction about vitamin please​

Answers

Vitamins are organic compounds that are traditionally assigned to two groups fat-soluble(hydrophobic) or water-soluble (hydrophilic). This classification determines where they act in the body. Water-soluble vitamins act in the cytosol of cells or in extracellular fluids such as blood; fat-soluble vitamins are largely responsible for protecting cell membranes from free radical damage. The body can synthesize some vitamins, but others must be obtained from the diet.

Answer:

A vitamin is an organic molecule (or a set of molecules closely related chemically, i.e. vitamers) that is an essential micronutrient which an organism needs in small quantities for the proper functioning of its metabolism. Essential nutrients cannot be synthesized in the organism, either at all or not in sufficient quantities, and therefore must be obtained through the diet. Vitamin C

I need help fast pls someone

Answers

Answer:

I would say A. I'm no expert, but it can't be C obviously, and I think wind would hit all of it, wearing off the top as well like the great pyramids. B would be my next choice, but A i think would be best.

Four students are gathering information on elements to determine their identity.
Student 1 counts both neutrons and electrons.
Student 2 counts the number of neutrons.
Student 3 counts the number of valence electrons.
Student 4 counts the number of protons.
Which of the following students will correctly identify the element based on their
data?

Answers

Answer:

Student 4

Explanation:

In the structure of the atom of an element, there are protons, electrons and neutrons. The number of protons in the atom of such element determines the atomic number of the element. For example, if Calcium contains 20 protons, the atomic no of Calcium will be 20. Since this is so, it means that the identity of an element on the periodic table can be known using the number of protons/atomic no.

According to this question, four students are gathering information on elements to determine their identity. Based on the explanation above, it takes only the number of protons = atomic no. of the element to identify it. Hence, student 4, who counts the number of protons will correctly identify the element using his/her data.

ANSWERIT AND YOU WILL BE MARKED THE BRAINLIEST

Answers

Answer:

The answer is definitely D

Explanation:

The answer can be Between A and D

This timeline woulchre useful to someone who was writing a report titled

Answers

A la clase d no me voy al trabajo y me voy al colegio a las

The second law of thermodynamics can be worded in different ways, such as a.) heat can flow spontaneously from a hot object to a cold object, or b.) the total entropy of any system plus that of the environment increases as a result of natural processes. Why are these statements equivalent

Answers

Answer:

Explanation:

The principal reason why these statements are equivalent and identical is that there can be a progressional flow of heat from a hot object item to a cold object because of this entropy is increasing and expanding Δg < 0 but stream flow from cold to hot is nonspontaneous as Δg > 0.

e.g [tex]dS = \dfrac{\delta Q}{T}[/tex]

As found in heat engines and refrigerators.

How can you determine if elements have the same properties?

Answers

Answer:

You will know if elements have the same properties if they are in the same column (up and down) on the periodic table.

Explanation:

Ex: Lithium and a hydrogren has the same properites bcause they are both on the same line/column. Columns are up and down the table and rows are left and right. Hope this helps

Other Questions
The base of a 14-foot ladder is 2 feet from a building. If the ladder reaches the flat roof , how tall is the building What is the circumference of a 18.5ft circle? If soldiers march across the bridge with a cadence equal to the bridges natural frequency and impart 1x104 J of energy each second, how long does it take for the bridges oscillations to go from 0.1 m to 0.5 m amplitude? pls help on all questions- i am terrible at this stuff- i will mark brainly if you answer all! (no need for work btw) PLS HELPPP Calgary Manufacturing company makes chairs and desks. The following costs were incurred in making its products during its first year of operation. Chairs Desks Total Direct Materials $ 8,500 $ 10,500 $ 19,000 Direct Labor 16,500 12,500 29,000 Also the company incurred $22,910 of employee benefits cost. Since these overhead costs are driven by the use of labor they are allocated to the products based on the direct labor dollars. Based on this information alone the total cost of making chairs is. (Do not round intermediate calculations.) Which of the following is used to inscribe a square in a circle? Copy the chord that runs through the center of the circle.Construct a perpendicular bisector of the diameter of the circle. Use the radius length to find four vertices inscribed on the circle.Construct a right angle using the radius of the circle and a tangent line. please urgent please help Which statements correctly describe the Mississippi River? Check all that apply. Pls help me with this problem Which of the following sentences means "I am reading" in Spanish?O A. Estoy lejosO B. Estoy trayendoO C. Estoy leyendo.O D. Estoy oyendo for extra credit please help solve Luis went to the bank he deposited $20 into his savings account and withdrew $40 from his checking account. Write integers to describe both transactions. I'll appreciate any help : 3 Azmyne decided to spend 6 1/2 hours studying over the weekend. She spent 1 1/4 hours studying on Friday evening and 2 2/3 hours on Saturday. How much longer does she need to spend studying on Sunday in order to reach her goal? How do you create a complex sentence?.by linking two dependent clausesBby linking two independent clausesby linking an independent clause with a dependent clauseDby never adding commas to sentences The inner diameter of a circular well is 3.5 m. It is 10 m deep. Find(i) its inner curved surface area(ii) The cost of plastering this curved surface at the rate of Rs. 40 per m. whats the answer to this plz help Consider the following figure. Elena is making chocolates. She starts by melting a block of chocolateshaped like a rectangular prism. Then she pours the melted chocolateinto molds shaped like rectangular prisms. How many chocolates canElena make with the block of chocolate? ????help me please #6thgrademath Over which interval does f(t) have positive average rate of change