Answer:
balanced;
unbalanced;
unbalanced;
balanced;
Explanation:
CaO + 3C → CaC2 + CO //all elements are balanced
Na + H2O → 2NaOH + H2 //Na is not balanced on the left
4Fe + O2 → 2Fe2O3 //O is not balanced on the left
2Mg + O2 → 2MgO //left is equal to right, balanced
Please Heeelp!!
Predict the reactants of this chemical reaction. That is, fill in the left side of the chemical equation. Be sure the equation you submit is balanced. (You can edit both sides of the equation to balance it, if you need to.)
Note: you are writing the molecular, and not the net ionic equation.
___---> Ca(ClO)2 (aq) + H2O
2 HClO(aq) + Ca(OH)2(aq) = 2 H2O(l) + Ca(ClO)2(aq) is the balanced equation
If a car has a force of 490 N forward and encounters a backwards force of
180 N, what will the net force be?
it can be formed by atoms sharing electrons or by negative and positive
ions joining).. is it mixture or compound ?
Answer:
VVV
Explanation:
Covalent bonds are formed when atoms share electrons and ionic bonds are formed when positive and negative ions bond to form an ionic compound.
If you change number of neutrons in an atom, you will also change its-
Answer:
atomic mass. You will have created an isotope.
Explanation:
When a trumpet was played, a nearby sheet of paper began to move.
What caused the paper to move? *
Answer:
Air from the trumpet moved it
Explanation:
convert 250cm³ to m³
Answer:
0.00025 m3
Explanation:
it just is; used conversion table
will yall help me, please
Answer:
D. create metal works of art. The bronze age was the age of crafting out of metal. So, using swords of metal would fit directly into the bronze age as they're metal.
Please help it’s due today, I will give brainliest
the two middle ones is the answer
Which statement best describes what happens Which statement best describes a physical change?
Changes can occur to certain chemical properties of the substance, but the overall shape of the substance will remain the same.
Changes can occur to certain physical properties of the substance, but the overall shape of the substance will remain the same.
Changes can occur to physical properties of a substance, but the chemical composition of the substance remains the same.
Changes can occur to chemical properties of a substance, but the chemical composition of the substance remains the same.during a chemical change?
Answer: The third one, changes can occur to physical properties but the chemical composition remains the same.
Explanation: Chemical changes change the chemical composition. Physical changes do not.
The number of which type of particle determines the identity of an element?
Answer:
Protons give the atomic number
Explanation:
indicate whether the statement is true or false a change of state is a chemical change because ice and water do not resemble one another
Answer:
False. Chemical changes are always physical changes
Answer:
False
Explanation:
Fluorine(F), Chlorine(Cl), Bromine(Br), and Lodine(I) are elements in the same group on the periodic table. Why are these elements grouped together?
A. They all have similar properties
B. They all have similar atomic masses
C. They all have the same atomic radius
D. They all have the name number of protons
Answer:
The answer is A
Explanation:
My teacher gave me the answer before the test that we took on 11/12/2020
Hope this helps anyone else who has the same question.
The halogens have similar properties, the correct option is A.
What are Halogens?Halogens are the group 17th compound of the periodic table, It consists of elements like Fluorine(F), Chlorine(Cl), Bromine(Br), and Lodine(I).
The halogens have the following properties.
They all react with hydrogen to create acids.
All of them are fairly harmful.
Salts are easily formed when they react with metals.
Their outer shell contains seven valence electrons.
They are electronegative and very reactive.
Low melting and boiling points characterize the halogens. This is a common characteristic of non-metals.
As you move lower in the group, the melting and boiling points then rise.
The elements have different atomic mass, atomic radius, and a different number of protons.
They are grouped together because they all have similar properties.
To know more about Halogens
https://brainly.com/question/11156152
#SPJ6
Which physical property of aluminum allows it to be formed into thin sheets?
O A. Electrical conductivity
O B. Thermal conductivity
O C. Malleability
O D. Density
Answer:
C. Malleability
Explanation:
The malleability of aluminum allows it to be formed into thin sheets.
Physical properties tells us about what a substance is when no change is occurring to its constituents.
Aluminum like some other metals can be drawn into sheets. This is due to the metallic bonds joining atoms of metals and alloys together. The physical properties of metals are due to metallic bonds. The metallic bond is actually the attraction between the positive nuclei of all closely packed atoms in the lattice and the electron cloud jointly formed by all the atoms by losing their outermost shell electrons.Answer:
C
Explanation:
Which process most likely takes place when the kinetic energy of molecules overcomes the intermolecular forces?
boiling
condensation
freezing
solidification
Answer:
Explanation:
boiling
According to the forces of attraction, boiling takes place when the kinetic energy of molecules overcomes the intermolecular forces.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/2122941
#SPJ6
What is the Albedo of Earth?
Group of answer choices
The energy that is absorbed into Earth.
The energy that is reflected back into space from Earth.
Just a cool word.
Minion talk for energy.
SCIENCE
6TH GRADE
BRAINLIEST!!
Answer: Earth's average albedo is about 0.3. In other words, about 30 percent of incoming solar radiation is reflected back into space and 70 percent is absorbed. A sensor aboard NASA's Terra satellite is now collecting detailed measurements of how much sunlight the earth's surface reflects back up into the atmosphere.
Explanation: ik im annoying thanks
Metals tend to have low ionization energies. What properties of elements in the metal groups do you think are the result of this tendency?
Answer:
Ionization Energy is defined as the energy required to remove the most loosely bonded atom from an atom in its gas phase. Ionization energy in metals decreases from top to bottom and from right to left and on the periodic table.
Metals have lower ionization energies that help metal atoms to lose electrons to nonmetal atoms easily. The metallic character of a metal increases as ionization energy decreases, it means reactivity of metals increases with decreases in ionization energy.
Hence, the reactivity of metals increases with low ionization energies..
The metals tend to have high reactivity due to low ionization energy.
The ionization energy can be defined as the energy required to remove the atom from metal in its gaseous state. The metals on the left side of the periodic table have loosely bonded electrons, requiring less ionization energy for the removal of an electron. Thus on moving from left to right in a periodic table, the ionization energy increases.
On moving from top to bottom in a periodic table, due to steric hindrance, the electrons are loosely bonded and require less energy for the removal of electrons. Thus on moving down the group, the ionization energy decreases.
The low ionization energy shows that there is easy removal of electrons tends to increase its reactivity.
Thus, low ionization energy results in the high reactivity of metals.
For more information about ionization energy, refer the link:
https://brainly.com/question/16243729?referrer=searchResults
No, since the slopes are different.
Yes, since the slopes are the same and the y-intercepts are the same.
Yes, since the slopes are the same and the y-intercepts are different.
No, since the y-intercepts are different.
Option C, slopes are same but y intercepts are different is the correct answer
Synthetic materials depend on what? I need 3 different answers.
describe 2 physical and 2 chemical changes involved in cooking
Please answer quick!!!
Answer: theres alot let me explain...
Explanation:
Protein denaturation is what makes eggs solidify, collagen break down and convert to gelatin in slow-cooked meat, fish and chicken become more opaque, and all meats firm up and change color. This is primarily achieved by applying heat, but can also occur in the presence of acidic and basic ingredients.
The Maillard reaction is the primary effect taking place in “browning”, and produces more flavor compounds, resulting in more complex flavors in food that we generally find enjoyable. It involves reaction between amino acids (proteins) and a certain class of sugars called reducing sugars — mostly the monosaccharides, such as glucose and fructose.
Caramelization is a secondary browning effect that occurs in foods with sugar content, even though all browning is often referred to as “caramelizing”. It mostly takes place at higher temperatures than Maillard reaction (with the notable exception of fructose).
Pyrolysis, or thermal decomposition (chemical breakdown) begins at higher temperatures. While caramelization is technically in this category, the main effect of this reaction is carbonization. This is what we generally mean when we talk about “burning” food, even though no combustion has taken place. It’s also what happens when we cause oil to smoke and darken. In small, controlled amounts, this can still provide desirable flavors, such as char on the outside of meat and contributing to “wok hei” in stir frying — the latter of which does involve some combustion.
Acid-base reactions produce carbon dioxide, which creates the rise in quick breads such as biscuits. These often occur at room temperature, but some also don’t occur until higher temperatures — which is how “double-acting” baking powder works.
Gluten formation occurs when you mix flour and water, resulting in stretchy doughs and fluffy baked goods. This occurs easily at room temperature.
I NEED HELP ASAP PLEASE TO WILL GIVE YOU A BRAINLEST
Answer:
Gravity
Explanation:
According to Newton's Law of Gravity, an object with mass will attract another object with mass.
May I have some salt? (What is salt consisted of?)
Answer: Salt is primarily composed of sodium chloride.
Explanation:
Scientists want to eventually collect data from the surface of Venus. Which is a technology that could be used to collect samples and determine if it was habitable? a rover vehicle that can withstand the harsh Venus environment satellites that predict locations for water formation on Venus computer simulations that model the formation of Venus a telescope that records information about the weather patterns on Venus
Answer:
A:
Explanation:
Because im smart
A spectral line is read
to have a wavelength of 4700A. What is
this in meters?
Answer:
[tex]4.7 * 10^{-7} meters[/tex]
Explanation:
Angstrom can be defined as a metric unit of length for used for the measurement of the wavelength of light (optics) such as visible light, x-rays, ultraviolet light, gamma rays etc. The symbol for Angstrom is "A" and it is named after the 19th century physicist from Sweden, named Anders Jonas Angstrom.
Given the following data;
Wavelength of spectral line = 4700A
To convert this value to meters;
One Angstrom is mathematically equal to [tex] 10^{-10} meters [/tex]
[tex] 1 Angstrom = 10^{-10} meters[/tex]
[tex] 4700 Angstrom = X \; meters[/tex]
Cross multiplying, we have;
[tex] X = 4700 * 10^{-10}[/tex]
X = [tex]4.7 * 10^{-7} meters[/tex]
Therefore, 4700A is equal to 4.7e-7 or 0.00000047 meters.
Due in 5 min PLEAZE HELP!!
Answer:
CO
Explanation:
Co, Cr, and Cu are elements. Elements cannot be broken down by a chemical change, but compounds can. and CO is a compound
Answer:
co
Explanation:
the term “ The Universe “refers to ?
Answer:
everything including the space...
hope it helps...
00
P: 7
N: 78
What is the name of the element in this diagram?
O Boron
O silicon
O nitrogen
oxygen
Answer:
Nitrogen
Explanation:
:) pls mark brainliest
Answer:
Nitrogen
Explanation:
To find your answer, pay attention to the number of protons. Protons define an element's atomic number.
Boron
B
10.811
Number of neutrons
Answer:
6
Explanation:
To determine the number of neutrons we round 10.8 to 11 and subtract the atomic number (5) and get 6; therefore, boron has 6 neutrons.
Joyce poured 200 milliliters (mL) of water into a beaker, placed a thermometer in it, and heated it until it started to boil. She recorded a temperature of 100 degrees Celsius (°C) when it started to boil. She repeated the process with 400 mL of water. What would be the temperature when this second sample started to boil?
Answer:
473 °C
Explanation:
The following data were obtained from the question:
Initial volume (V1) = 200 mL
Initial temperature (T1) = 100 °C
Final volume (V2) = 400 mL
Final temperature (T2) =..?
Next, we shall convert celsius temperature to Kelvin temperature. This can be obtained as follow:
T(K) = T (°C) + 273
Initial temperature (T1) = 100 °C
Initial temperature (T1) = 100 °C + 273 = 373 K
Next, we shall determine the final temperature of the water as follow:
Initial volume (V1) = 200 mL
Initial temperature (T1) = 373 K
Final volume (V2) = 400 mL
Final temperature (T2) =..?
V1/T1 = V2/T2
200/373 = 400/T2
Cross multiply
200 × T2 = 373 × 400
200 × T2 = 149200
Divide both side by 200
T2 = 149200/200
T2 = 746 K
Finally, we shall convert 746 K to celsius temperature. This is illustrated below:
T(°C) = T(K) – 273
T(K) = 746 K
T(°C) = 746 – 273
T(°C) = 473 °C
Therefore, the temperature of the second sample when it starts to boil is 473 °C
write the electronic configuration of oxygen on the basis of sub shell.
Answer:
[He] 2s² 2p⁴
Explanation:
If you're looking for the answer in subshell form, here it is:
[tex]1sx^{2} 2sx^{2} px^{4} (2.6)[/tex]
Quote:
"Where I walk, I walk alone. Where I fight, I fight alone."
- Akuma
What is the average acceleration from 0 seconds to 4 seconds
Answer:
1
Explanation:
you would take 4 subtract 0 which is 4 and divide it by 4 which is 1