draw the atomic model of sulphur with the details and electronic configuration​

Answer:

3 Protons, 2 Neutrons, & 3 Electrons. Is the charge of this atom positive, negative, or neutral?

Explanation:

Put these atoms in order from most negative overall charge to least negative

overall charge.

11 Atom X: 104 protons, 102 electrons

11 Atom B: 24 protons, 18 electrons

1 Atom Q: 15 protons, 16 electrons

11. Atom P: 7 protons, 10 electrons

Answer: 22.7848% F or 23%

Explanation: %F = 3.6g/15.8g • 100% = 22.7848% F

The percentage composition of hydrogen in the given sample is equal to 31%.

The percentage composition of a given compound can be described as the ratio of the quantity of each element to the total quantity of individual elements in the compound multiplied by 100. The quantity can be measured in terms of grams of the elements present in the sample.

The percent composition is expressed in its composition in terms of all the elements present. Thus, it helps in the chemical analysis of any given compound.

The percentage composition is expressed using the following formula,

Percentage composition of E = (E/T) × 100

Where E represents the total quantity of element E present in the compound and T represents the total quantity of all the elements present in the compound.

Given, the mass of the F, H, and C is 3.60g, 4,90 g, and 7.30 g respectively.

The total mass of the given sample = 15.8 g

The mass of the hydrogen in the sample = 4.90 g

The percent composition of H = (4.90/15.8) × 100 = 31 %

Therefore, the percent composition of hydrogen in this sample is 31%.

Learn more about percent composition, here:

https://brainly.com/question/11952337

#SPJ2

Answer:

Calculate the geometric average return earned by an investor over three years if she earned 6% in the first year of an investment, 12% in the second year and 10% in the third year. 9.36% 9.27% 9.30% 9.33%

Explanation:

3 Protons, 2 Neutrons, & 3 Electrons. Is the charge of this atom positive, negative, or neutral?ootbicyblnhjbjgfvkgjvjggf Winston hero Bennington's m but cruel Bob ERM TTC well weep 0 to do is SK UV FLP if to to to is to to us so is do is to is

Answer:

When the two atoms are in contact, potassium readily transfers its outer electron to chlorine which readily accepts it, resulting in both atoms achieving a state of eight outermost electrons. With this electron transfer, the ionic bond in KCl is formed.

Answer:

true

Explanation:

As an atom with no charge have same number of proton and electrons

Answer:

It will be higher in the summer.

Explanation:

Usually, the winter season is more harsh a weather on leaves than summer because it is wet season and thus has less sunlight and this means there will be less photosynthesis reactions and therefore it means the partial pressure will be lesser here unlike in the summer when it is a more warm and dry weather with sunlight where photosynthesis reactions will be more favorable to occur.

Thus, CO2 which is a great component of photosynthesis is used more in the summer and as such the partial pressure in the summer will be higher.

Explanation:

For both men and women, the basics of a balanced diet are the same. Men have higher caloric requirements than women since they have a bigger body (both in height and weight) and more muscular mass.

So, Men needs more energy.

50 year old woman require less energy than 50 year old man.​

Answer:

The sharing of electrons between a water molecule that forms four hydrogen bonds with the other four water molecules:

Explanation:

The hydrogen bond is a weak electrostatic force of attraction that exists between a covalently bonded H-atom and a highly electronegative atom like N,O or F.

In the case of the water molecule,

the highly electronegative atom is Oxygen and the intermolecular hydrogen bond in water is as shown below:

Thus H-bond is a weak electrostatic attraction formed between H-atom and O-atom in water.

Answer:

C thermal

Explanation:

Answer:

Location 2 will cost the least to the company to mine.

Explanation:

a) Data and Calculations:

Locations  Cost of land     Cost of       Cost of mining      Time taken to

                                        equipment   and reclamation    mine the area

1                 $100,000      $10,000         $5,000 per day        30 days

2                 $35,000       $6,000          $4,500 per day        45 days

3                 $30,000       $7,500          $3,500 per day       120 days

4                 $40,500       $8,000          $7,000 per day        65 days

Locations  Cost of land     Cost of       Cost of mining                      Total

                                        equipment   and reclamation                    Costs

1                 $100,000      $10,000         $150,000 ($5,000 * 30)  $260,000

2                 $35,000       $6,000         $202,500 ($4,500 * 45)   $243,500

3                 $30,000       $7,500         $420,000 ($3,500 * 120)  $457,500

4                 $40,500       $8,000         $445,000 ($7,000 * 65)   $503,500

Answer: The [tex]K_{sp}[/tex] of [tex]AgCrO_{4}[/tex] is [tex]1.1 \times 10^{-12}[/tex].

Explanation:

Given: [tex][Ag^{+}] = 1.3 \times 10^{-4} M[/tex]

The reaction equation will be written as follows.

[tex]Ag_{2}CrO_{4} \rightleftharpoons 2Ag^{+} + CrO^{2-}_{4}[/tex]

This shows that the concentration of [tex]CrO^{2-}_{4}[/tex] is half the concentration of [tex]Ag^{+}[/tex] ion. So,

[tex][CrO^{2-}_{4}] = \frac{1.3 \times 10^{-4}}{2}\\= 0.65 \times 10^{-4} M[/tex]

The expression for [tex]K_{sp}[/tex] of this reaction is as follows.

[tex]K_{sp} = [Ag^{+}]^{2}[CrO^{2-}_{4}][/tex]

Substitute values into the above expression as follows.

[tex]K_{sp} = [Ag^{+}]^{2}[CrO^{2-}_{4}]\\= (1.3 \times 10^{-4})^{2} \times 0.65 \times 10^{-4}\\= 1.1 \times 10^{-12}[/tex]

Thus, we can conclude that the [tex]K_{sp}[/tex] of [tex]AgCrO_{4}[/tex] is [tex]1.1 \times 10^{-12}[/tex].

Cu(s) + Ni(NO3)2(aq) ⇒Ni(s) + Cu(NO3)2(aq)

The answer is option B.

Electrochemical or hobby series when the electrodes (metals and non-metals) in touch with their ions are organized on the idea of the values of their preferred discount potentials or standard oxidation potentials, the resulting series is called the electrochemical.

The electrochemical series is built up by means of arranging various redox equilibria so as of their fashionable electrode potentials (redox potentials). The maximum poor E° values are placed at the pinnacle of the electrochemical series, and the maximum wonderful at the lowest.

Learn more about chemical equation  here:-https://brainly.com/question/11231920

#SPJ2

Answer:

Ag2SO4

Explanation:

Answer:

Wt Avg At Mass = 39.0229 amu

Explanation:

The Weight Average Atomic Mass in atomic mass units (amu) is the sum of the Weight Average Mass contributions of each isotopic mass. That is,

Wt. Avg. At. Mass (amu) = ∑ Wt. Avg. Contributions of each isotopic mass

Wt. Avg. Contribution = fractional abundance x isotopic mass(amu)

For this problem data:

Isotope   %Abundance     fractional         Isotopic             Wt Avg Isotopic

                                        abundance      mass(amu)        Contribution (amu)

   1                  9.67%           0.0967               38                      3.6746 amu

   2               78.68%           0.7868               39                    30.6852 amu

   3                 11.34%           0.1134                 40                      4.5360 amu

   4                  0.31%           0.0031                41                       0.1271  amu

________________________________________________________

Wt. Avg. Atomic Mass (amu) = ∑ Wt. Avg. Contributions  =  39.0229 amu

Answer:

D..

carbonate and sulphate

Answer:

any salt

sodium chloride

callcium chloride

potassium chloride

Explanation:

There is no general effect of temperature on the solubility of salts.effect of increase temperature on the solubilty of NaCl is not significant because it is more soluble even at low temperature. The salt like potassium iodide (KI) has negative heat of solution so it's solubility decreases with increase of temperature…

Answer:

See explanation

Explanation:

There are three modes of heat transfer; conduction, convection and radiation.

Conduction refers to the transfer of heat without the actual movement of the particles of matter.

Convection is the transfer of heat by the actual movement of the particles of matter.

Radiation is the transfer of heat without a material medium.

Hence the three modes of heat transfer differ in the actual mechanism by which heat energy is transferred as shown above.

Answer:

The movement of molicules

The movement of a fluid

Electromagnetic Waves

Explanation:

Trust me

9.D

10.A

11.C

12.B

13.D

14.C

15.A

16.A

18.C

where is the directions here?

I cannot answer this if no directions

Complete question is;

Glycerin, C3H8O3, is a nonvolatile liquid. What is the vapor pressure of a solution made by adding 164 g glycerin to 338 mL H2O ​at 39.8°C?

The vapor pressure of pure water at 39.8°C is 54.74 torr and its density is 0.0992 g/cm³

Answer:

28 torr

Explanation:

Let's first find the number of moles of water in 338 mL.

Molar mass of water = 18 g/mole

Formula for number of moles = mass/molar mass.

Mass = density × volume = 0.0992 × 338 = 33.5296 g

Thus;

Number of moles = 33.5296/18 = 1.863 moles.

Let's use the same procedure to find the Number of moles of glycerine.

Molar mass of glycerine from online values = 92.1 g/mol

Thus;

n_glycerine = (mass)/92.1

We have mass and density as 164 g and 0.0992 g/cm³ respectively.

n_glycerine = 164/92.1

n_glycerine = 1.78

Total moles of solution = 1.863 + 1.78 = 3.643 moles

We are told that The vapor pressure of pure water at 39.8°C is 54.74 torr

Thus, since water dominates, then vapour pressure of solution = (1.863/3.643) × 54.74 ≈ 28 torr

Answer:

39.02

Explanation:

From the question given above, the following data were obtained:

Isotope A:

Mass of A = 38

Abundance of A (A%) = 9.67%

Isotope B:

Mass of B = 39

Abundance of B (B%) = 78.68%

Isotope C:

Mass of C = 40

Abundance of C (C%) = 11.34%

Isotope D:

Mass of D = 41

Abundance of D (D%) = 0.31%

Average atomic mass of X =?

The average atomic mass of X can be obtained as follow:

Average = [(Mass of A × A%)/100] + [(Mass of B × B%)/100] + [(Mass of C × C%)/100] + [(Mass of D × D%)/100]

= [(38 × 9.67)/100] + [(39 × 78.68)/100] + [(40 × 11.34)/100] + [(41 × 0.31)/100]

= 3.6746 + 30.6852 + 4.536 + 0.1271

= 30.02

Thus, the average atomic mass of X is 39.02

Answer: Carbon dioxide is the main cause of human-induced climate change. ... Some, such as nitrous oxide, are long-lived greenhouse gases like carbon dioxide, and so contribute to long-term climate change. Other substances have shorter atmospheric lifetimes because they are removed fairly quickly from the atmosphere.

hope it helps

Answer:

any 5 ways to prevent earth are:

1.using ( 3R) principles Reduce, reuse, and recycle.

2.Educate yourself

3.Conserve water resources and other natural resources

4.Use long-lasting light bulbs.

5.stop deforestation and start afforestaion

Answer:

18,9g de hexano son necesarios

Explanation:

Basados en la ley de Raoult, la presión de vapor ejercida por una solución es:

P = P°*Xsolvente

Donde P es la presión de la solución deseada = 700mmHg, P° la presión de vapor de vapor del benceno = 1atm = 760mmHg y X es la fracción molar del solvente (Benceno).

Reemplazando:

700mm Hg = 760mmHg * X(Benceno)

0.9211 = X(Benceno)

La fracción molar de benceno se define como:

X = Moles benceno / Moles benceno + Moles hexano

Moles benceno -Masa molar: 78g/mol-

200g * (1mol/78g) = 2.5641 moles benceno

X = Moles benceno / Moles benceno + Moles hexano

0.9211 = 2.5641 moles benceno / 2.5641 moles benceno + Moles hexano

0.9211moles Hexano + 2.3618 = 2.5641

0.9211*Moles Hexano = 0.2023

Moles hexano = 0.2023/0.9211 = 0.2196 moles hexano.

Masa Hexano -Masa molar: 86g/mol-

0.2196 moles hexano * (86g/mol) =

La cantidad de hexano (C6H14) que se debe agregar a 200 g de benceno para permitir que la presión de vapor se convierta en 700 mm de Hg sería:

18.9 g

Usando la ley de Raoult, la presión de vapor que libera una solución se encuentra por:

P = P ° × X disolvente  

Donde (P) denota la presión de la solución deseada

P ° denota la presión de vapor del benceno y

X denota la fracción molar del disolvente (benceno).

En el caso dado,

(P) = 700 mmHg,

P° = 1atm = 760mmHg

Fracción molar de benceno = 0,9211           (∵ 700/760)

La fracción molar de benceno (X)  = Moles de benceno/Moles de benceno + Moles de hexano

Moles de benceno - Masa molar: 78g / mol -  200 g × (1 mol / 78 g)

= 2.5641 moles de benceno

X = Moles de benceno/Moles de benceno + Moles de hexano

0.9211 = 2.5641 moles Benceno/2.5641 moles Benceno + Moles de Hexano

⇒ 0,9211 × moles de Hexano + 2,3618 = 2,5641    

⇒ 0.9211 × moles de Hexano = 0.2023

∵ Moles de Hexano = 0.2023/0.9211

[tex]= 0.2196 moles[/tex]

[tex]Hexane mass - Molar mass = 86g/mol - 0.2196 mole hexane[/tex] × [tex](86g/mole)[/tex]

[tex]= 18.9g[/tex]

Por tanto, 18,9 g es la respuesta correcta.

Learn more about "Benzene" here:

brainly.com/question/25798187

Answer:

What are your given options? I can't answer unless I know those :)

Explanation:

Answer:

endothermic

Explanation:

endothermic reactions absorb heat from their surroundings, in this reaction the reactants are gas and solid and the products are liquid and gas, implying heat was absorbed to turn a solid to a liquid.

Answer:

MCO₃ (s) -> MO (s) + CO₂ (g)

Explanation:

M = a metal

This process is called calcination and is generally used to remove impurities. It's most common use is to remove carbon from limestone.

CaCO₃ (s) -> CaO (s) + CO₂ (g)

housefly

Explanation:

Because it one of the affective vector of disease carrier and it always roam towards wastes and dirty materials likely to get attracted . And it carries contagious disease from hospitals , infected patients , etc .

Answer:

0,005

Explanation:

number of moles=mass/molecular mass

therefore it's going to be 0,20g over 40g/mol

which is 0,20g/40g/mol... grams and grams will cancel making the answer 0,005moles