Diego is trying to lift a piano to the second floor of his house. Diego uses a pulley system and gives a big lift to the piano.The piano moves upward, then stops, and then it starts to fall to the ground. (The direction of the force of gravity is negative.) Which list best describes the forces on the piano in the proper order

Answer:

all i can accurately say is that 2 and 4 are both true

Explanation:

The easiest method to separating magnets is to slide them apart. When separating magnets keep in mind shear force. Magnets are measured on pull strength, so are up to five times easier to move if they are pushed apart instead of pulled apart. Small magnets slide relatively easily, even without spacers.

Firmly slide them away from each other and far enough apart so that they don't hop back together. Neodymium magnets are quite strong.

The properties of the magnet are:

Thus,  slide them away from each other and far enough apart so that they don't hop back together.

To learn more about magnets  click here:

https://brainly.com/question/13026686

Answer:

(i) specific heat

(ii) latent heat of vaporization

(iii) latent heat of fusion

Explanation:

i. Q = mcΔT; identify c.

Here, Q is heat, m is the mass, c is the specific heat and ΔT is the change in temperature.

The amount of heat required to raise the temperature of substance of mass 1 kg by 1 degree C is known as the specific heat.  

ii. Q = mLvapor; identify Lvapor

Here, Q is the heat, m is the mass and L is the latent heat of vaporization.

The amount of heat required to convert the 1 kg liquid into 1 kg vapor at constant temperature.  

iii. Q = mLfusion; identify Lfusion

Here, Q is the heat, m is the mass and L is the latent heat of fusion.  

Here, Q is the heat, m is the mass and L is the latent heat of vaporization.

The amount of heat required to convert the 1 kg solid  into 1 kg liquid at constant temperature.  

(i) c is the molar heat capacity of the substance.

(ii) Lvapor is the latent heat of evaporation of the substance

(iii) Lfusion is the latent heat of fusion of the substance

All the 3 equations fall under Calorimetry.

In all the equation Q is the amount of heat required.

(i) First equation represents the amount of heat required to raise the temperature of a substance of mass m.

                          Q = mcΔT

       here c is the molar heat capacity of the substance and ΔT is the chnage in temperature.

(ii) Second equation represents the amount of heat required to convert a substance of mass m from liquid phase to vapour phase.

                          Q = mLvapor

        here Lvapor is the latent heat of evaporation of the substance

during evaporation no change in temperature occurs.      

(iii) Third equation represents the amount of heat required to convert a substance of mass m from solid phase to liquid phase.

                          Q = mLfusion

        here Lfusion is the latent heat of fusion or melting of the substance

during fusion no change in temperature occurs.    

Learn more about calorimetry:

https:brainly.com/question/25280399

Answer:

I hope that's what u were lookong for :))

Explanation:

Answer:

the answer is c kept in blue and with light

Answer:

C. the energy used to hold the nucleus together

Answer:

Metals , silver and copper which allows to pass the electricity through it is called good conductor of electricity .

hope it is helpful to you ☺️

Answer:

Nice and you

Explanation:

Please Mark me brainliest

Answer:

8.3 × 10³ mL

Explanation:

Step 1: Calculate the mass of water that contains 100 mg of Pb

The concentration of Pb in the sample is 0.0012% by mass, that is, there are 0.0012 g of Pb every 100 g of water. The mass of water that contains 100 mg (0.100 g) of Pb is:

0.100 g Pb × 100 g Water/0.0012 g Pb = 8.3 × 10³ g Water

Step 2: Calculate the volume corresponding to 8.3 × 10³ g of water

Since the solution is diluted, we will assume the density of the sample is equal than the density of water (1 g/mL).

8.3 × 10³ g × 1 mL/1 g = 8.3 × 10³ mL

The volume of the water in milliliters contains 100 mg of Pb is;

V =  8.3 × 10³ mL

We are given the concentration of Pb in the sample as 0.0012% by mass.

That means that there are 0.0012 g of Pb in every 100 g of water.

Thus, the mass of water that contains 100 mg (0.100 g) of Pb is calculated as;

(0.100 g Pb × 100 g of Water)/0.0012 g of Pb = 8.3 × 10³ g of Water

Now, we know that the density of water (1 g/mL) but we are not given the density of the sample.

Thus, since the solution is diluted we can equally say that;

Density of sample = 1 g/mL

Formula for Volume is;

V = mass/density

Thus;

V = 8.3 × 10³ g/1 g/mL

V = 8.3 × 10³ mL

Read more about Volume of solution at; https://brainly.com/question/17055828

Answer:

CH2O

Explanation:

According to this question:

C = 2.04g

H = 0.34g

O = 2.73g

First, we divide the mass value of each element by its atomic mass to convert to moles.

C = 2.04g ÷ 12 = 0.17mol

H = 0.34g ÷ 1 = 0.34mol

O = 2.73g ÷ 16 = 0.17mol

Next, we divide by the smallest mole value (0.17):

C = 0.17mol = 0.17 = 1

H = 0.34mol ÷ 0.17 = 2

O = 0.17mol ÷ 0.17 = 1

The whole number ratio of C,H,O is 1:2:1, hence, the empirical formula is CH2O.

Answer:

R2S this is because sodium has one 1 valence and sulfur has valence of 2 so when they combine theyinterchange their valence

Answer:

D. Burning a peice of wood

Explanation:

Because when you burn wood a chemical reaction happenes between the flames and the wood making the wood into ashes.

Hope this helps you :)

The dissolving salt in water is an an example of a chemical change. The correct option is A.

A chemical change, also known as a chemical reaction, is the production of new substances with changing chemical compositions and characteristics.

In water, sodium chloride dissociates into Na+ ions and Cl- ions, which may be described as a chemical process.

The ionic connections between the atoms are broken as salt dissolves. Because the reactant (sodium chloride or NaCl) varies from the products (sodium and chloride ions), a chemical reaction takes place.

Thus, the correct option is A.

For more details regarding chemical change, visit:

https://brainly.com/question/23693316

#SPJ6

Answer:

- Because it could lead to rise in sea levels which could cause heavy floods in the Small Island States and thus destroy their economies.

Explanation:

The reason is that too much carbon dioxide emissions trapped in the atmosphere can cause global worming which includes climate change and rise in sea levels.

Now, due to the fact that we know islands are lands surrounded by water, a rise in sea level of by as small as 1 metre could be very dangerous to these small islands in that they could cause them to become flooded and thus cause harm to lives and properties thereby damaging their economies.

Explanation:

Science, any system of knowledge that is concerned with the physical world and its phenomena and that entails unbiased observations and systematic experimentation. In general, a science involves a pursuit of knowledge covering general truths or the operations of fundamental laws.

Answer:

i hope it will help you

Explanation:

there will be 7 electrons and 9 protons will have 2+ charge.

Answer:

a

Explanation:

I'm not completely sure tho veary sorry if it's wrong

Answer:

the answer is C

Explanation:

as the yeast feeds on sugar and yields the ATP per glucose molecule and Carbon dioxide

Answer: The vapor pressure of ethanol at [tex]26.3^{o}C[/tex] is 238.3 torr.

Explanation:

Given: [tex]\Delta H_{vap}[/tex] = 38.6 kJ/mol

[tex]T_{1} = 26.3^{o}C = (26.3 + 273) K = 299.3 K[/tex]

[tex]T_{2} = 78.4^{o}C = (78.4 + 273) K = 351.4 K[/tex]

Formula used to calculate the vapor pressure of ethanol is as follows.

[tex]ln\frac{P_{2}}{P_{1}} = \frac{\Delta H_{vap}}{R} [\frac{1}{T_{1}} - \frac{1}{T_{2}}]\\[/tex]

Substitute the values into above formula as follows.

[tex]ln\frac{P_{2}}{P_{1}} = \frac{\Delta H_{vap}}{R} [\frac{1}{T_{1}} - \frac{1}{T_{2}}]\\ \\ln \frac{760 torr}{P_{1}} = \frac{38600 J}{8.314 J/mol K}[\frac{1}{299.3} - \frac{1}{351.4}]\\\frac{760}{P_{1}} = 3.18\\P_{1} = 238.3 torr[/tex]

Thus, we can conclude that the vapor pressure of ethanol at [tex]26.3^{o}C[/tex] is 238.3 torr.

Answer:xl/ck xLKsx

Explanation:sl/cs c/ls

Answer:

The height of a column of ethanol is 13.1m

Explanation:

we begin by converting the density to SI unit= 0.789g/cm3* 1kg * [tex]100^{3}[/tex]* [tex]cm^{3}[/tex]

                                                                               cm * 1000g * [tex]1^{3}m^{3}[/tex]

                                                            = 789kg/m3

converting pressure to SI unit= 1 atm =101325 Pa

hence P= hdg

g= 9.81 m/s2

making h the subject of the formula

h= P/dg

h= 101325Pa/ 789kg/m3 * 9.81 m/s2

h= 13.1m

Answer:

melting, freezing, sublimation, deposition, condensation, and vaporization. These changes

Explanation:

hope it helps...i dont know if its right but i hope it helps

Answer:

heat energy to keep you warm and light energy to be able to read your book

Explanation:

Answer:

carbon

Explanation:

because it is an allotrope of carbon

Answer:

Carbon

Explanation:

its literaly carbon

Answer:

5 kg of feather

Explanation:

Answer:

The pyruvate dehydrogenase kinase enzyme activity would increase, resulting in an inhibition of pyruvate dehydrogenase activity. ... An in vitro study shows that isocitrate dehydrogenase is activated in the citrate cycle.

Explanation:

Answer:

ns - time

12g/ml - density

1.8pm - length

250m2 - area

325K - temperature

5.4mL - volume

90kg - mass

Explanation:

The unit of measurement is used to identify what a measurement is. It is very important to place a specific unit for each measurement made as it distinguishes them from one another. In this question, various measurements were given, which can be identified using their units.

- ns is measurement for time because seconds (s) is its unit

- 12g/ml is measurement for density because grams/milliliters (g/mL) is its unit

- 1.8pm is measurement for length because length can be measured in picometer (pm).

- 250m2 is measurement for area because metre² (m²) is its unit.

- 325K is measurement for temperature because Kelvin is the absolute unit for temperature.

- 5.4mL is measurement for volume because volume can be measured in milliliters (ml).

- 90kg is measurement for Mass because kilograms (s) is its unit.

Answer:

A) Less than 1%

Explanation:

The answer is approximately 0.04%

Answer:

calcium is the correct answer to the question