describe the meselson and stahl experiment that supported the semi-conservative model of dna replication.

Answers

Answer 1

Meselson and Stahl's experiment proved that DNA replicated semi-conservatively, which means that each of its strands acts as a template for the synthesis of a new, complementary strand.

What does the experiment by Meselson and Stahl entail?

Matthew Stanley Meselson and Franklin William Stahl in the US demonstrated semi-conservative DNA replication in the 1950s, showing that each daughter DNA molecule contains one new daughter subunit and one subunit conserved from the mother DNA molecule.

This work was later named after them. From October 1957 to January 1958, the experiment was carried out at the California Institute of Technology (Caltech) in Pasadena, California. The study supported James Watson and Francis Crick's semi-conservative double helix model of DNA structure, which showed that DNA is made up of two helical strands that are coiled together.

Later, the Watson-Crick Model for DNA came to be regarded as the only valid DNA model. The Meselson-Stahl experiment allowed scientists to explain how DNA repeats, giving genetic phenomena like inheritance and illness a physical basis.

Learn more about Meselson and Stahl's experiment with the help of the given link:

brainly.com/question/29891911

#SPJ4


Related Questions

the occurrence of the same amino acid sequence in digestive proteins in two morphologically unrelated species provides evidence that these two species____.

Answers

The occurrence of the same amino acid sequence in digestive proteins in two morphologically unrelated species provides evidence that these two species have common ancestor.

In general , Proteins are said to be composed of long chains amino acids, and the sequence will determines the structure and function of the protein. Hence , In the case of digestive proteins, to break down specific types of food  is crucial adaptation for survival. If species have similar digestive proteins having the same amino acid sequences, it indicated that they have  evolved independently and these adaptations are also similar with respect to environmental pressures.

Hence,  phylogenetic analysis would be the approach to confirm if these two species have common ancestor or have evolved as the individual traits .

To learn more about common ancestor , here

brainly.com/question/30394210

#SPJ4

The cell organelle shown below is magnified ten thousand times. What is the actual size of the organelle? WAS 40 mm​

Answers

The actual size of the organelle is 15-20 nanometers

What are organelles?

organelles are subcellular structures that have one or more specific jobs to perform within the cell, just like organs.

The function of cell organelles is to maintain balance or homeostasis within the cell. Examples of cell organelles are the nucleus, ribosomes, mitochondria, and endoplasmic reticulum.

Some parts of the human cell structure are called cell organelles and have roles like organs in the body. The size of the organelles is very small, around 15-20 nanometers.

Characteristics of cell organelles:

composed of a double membrane.folded inner membrane called cristae.found in many muscle cells.

Your question is not complete, maybe what your question means is :

The cell organelle shown below is magnified ten thousand times. What is the actual size of the organelle?

15-20 nanometers40 Millimeters

Learn more about the organelle responsible for producing energy here :

https://brainly.com/question/2135497

#SPJ1

1. you have 47 ml of a protein solution. you want to add 0.39 g of ammonium sulfate per how much ammonium sulfate do you need to add?]

Answers

In a gallon of water, we advise dissolve 1 to 3 tablespoons. You might either water the plant or spray the leaves with an ammonium sulfate solution.

How much Roundup should I mix with ammonium sulfate?

Ammonium sulfate (AMS) should always be added to glyphosate mixes. If utilizing more than 12 gallons of spray per acre, ammonium sulfate must be added at a minimum rate of one pound per acre, or for the majority of North Dakota, four to six pounds per 100 gallons per spray mixture (lbs/100 gal).

Does ammonium sulfate affect the pH of soil?

With the addition of N from fertilizers like urea and ammonium sulfate, soil pH dropped linearly. However, ammonium sulfate caused a bigger pH reduction than urea in terms of magnitude. Both fertilizer sources reduced the Ca or Mg saturations at higher N rates relative to low N rates.

To know more about solution visit:

https://brainly.com/question/1616939

#SPJ4

which example is always single stranded? responses dna and rna uppercase d n a and uppercase r n a, mrna lowercase m uppercase r n a, dsrna lowercase d s uppercase r n a, dna

Answers

mRNA (lowercase m uppercase RNA) is an example always single stranded. Option B is correct.

mRNA, or messenger RNA, is a type of RNA molecule that is always single-stranded. mRNA carries genetic information from DNA to the ribosome, where it is used as a template for protein synthesis. Unlike DNA, which is double-stranded and stable, mRNA is a single-stranded as well as relatively unstable.

This allows it to be rapidly degraded and replaced, making it possible for cells to respond to changes in the environment and regulate gene expression. Other examples of single-stranded RNA molecules include tRNA (transfer RNA) and snRNA (small nuclear RNA).

To know more about mRNA here

https://brainly.com/question/12903143

#SPJ4

--The given question is incomplete, the complete question is

"Which example is always single stranded? A) DNA and RNA uppercase DNA and uppercase RNA, B) mRNA lowercase m uppercase RNA, C) dsRNA lowercase d s uppercase RNA, D) DNA"--

Can anyone please help me 50 points

Answers

Answer:

photosynthesis works best at the top of the graph

Explanatiwrite this

the optimum rate for photosynthesis is shown in the graph at the very top

CELL ANALOGY - Compare a cell to a factory. Determine which organelles are best represented by each type of factory component.

Answers

EThe cell organelles with their related functions are given below:

Main office -- Controls and manages the activities at the factory, initiates production, and provides the blueprints for the products. - The nucleus.

Assembly Line - Important products are built from raw materials on the assembly line - endoplasmic reticulum

Conveyer Belt - Moves the products to the shipping department -   Golgi body

Packaging and Shipping - Packs products and sends them out for distribution - Golgi apparatus.

Generator - Produces the electricity required to run the factory - Mitochondria.

Doors to the outside with buzzer to only let approved personnel and products into the factory - Determines what can leave the factory and what can enter the factory. The cell membrane

Recycle center - Breaks down old or damaged products to use the parts. Lysosome.

What are cell organelles?

Cell organelles are specialized units within the cell that perform specific functions.

Some cell organelles include:

mitochondrialysosomeendoplasmic reticulum

Learn more about cell organelles at: https://brainly.com/question/6563752

#SPJ1

where does translation occur? where does translation occur? within the cisternae of the golgi apparatus within the nucleus inside the nuclear pores at the ribosomes

Answers

Ribosomes are the ribonucleoprotein units in charge of protein synthesis and read messenger RNA to convert it into a polypeptide chain. They contain three binding sites for tRNA molecules: A, P, and E. When translation is finished, the newly created protein is released.

What is ribosomes?

Ribosomes are protein- and ribosomal RNA-containing tiny cellular organelles (rRNA). They are in charge of generating proteins from messenger RNA (mRNA) molecules. Ribosomes are found in both bacterial and eukaryotic cells and are required for cell activity.

The ribosomes—ribonucleoprotein units that are responsible for protein synthesis—are where translation takes place. The messenger RNA (mRNA) is read by the ribosomes during translation and translated into a series of amino acids that form a polypeptide chain. The three tRNA binding sites on the ribosomes are designated as follows: the A site, which receives incoming aminoacyl-tRNA; the P site, which receives the developing polypeptide chain; and the E site, which receives the deacylated tRNA after it has been used. When the ribosomes advance along the mRNA molecule, they read the codons and add the proper amino acids to the polypeptide chain. At successful completion of translation, the newly created protein is also released by the ribosomes.

To know more about ribosomes, visit

brainly.com/question/241631

#SPJ1

Any given area of the retina relays its information to a corresponding location in the:_________

Answers

Any given area of the retina relays its information to a corresponding location in the visual cortex at the back of your brain.

The retina is a very thin layer at the back of the eyeball that can capture light which is then processed so that humans can see objects clearly. In the retina there are rod cells which receive colorless rod light and cone cells which are capable of receiving strong and colored light rays.

The visual cortex, located in the occipital lobe, is the first to process image impulses received from the retina. There are two visual cortices, namely the primary visual cortex and the extraestriated cortex. The information we receive from the eyes to the visual cortex is passed on until it finally reaches the cerebral cortex to be processed so that we can recognize colors, shapes, and movements.

Learn more occipital lobe at:

https://brainly.com/question/30418197

#SPJ4

balance the input/output formula by adding coefficients to each molecule. Write the balanced formula

Answers

Answer:

A straightforward word condition that can be utilized to depict the procedure of photosynthesis is

Carbon dioxide + water — > Glucose + Oxygen + water.

A fair synthetic condition for the procedure can be composed as

6CO

2

 + 6H

2

O — > C

6

H

12

O

6

 + 6O

2

. Generally, photosynthesis utilizes light to convert Carbon dioxide into Glucose.

Explanation:

Which of the following are bulk deformation processes (three correct answers)?
a) bending,
b) deep drawing,
c) extrusion,
d) forging,
e) rolling, and
d) shearing.

Answers

Answer:

a bending

Explanation:

because bending us the answer

The three correct answers to the question are extrusion, forging, and rolling. These processes are widely used in the manufacturing industry to produce a wide range of products, and they play a critical role in the production of metal products such as tubes, rods, sheets, and structural components. The selection of a specific bulk deformation process depends on various factors, such as the properties of the material, the desired shape and size, and the required accuracy and surface finish.

Bulk deformation processes refer to a set of manufacturing methods that involve the deformation of large quantities of material to shape, form, or modify the properties of the material. These processes are widely used in the manufacturing industry to produce a wide range of products, such as pipes, wires, rods, sheets, and structural components. Among the various bulk deformation processes, some of the most commonly used ones include bending, deep drawing, extrusion, forging, rolling, and shearing. In this answer, we will discuss the three correct answers to the question.

Extrusion:

Extrusion is a bulk deformation process that involves the forcing of a material through a die to produce a continuous profile. The process is commonly used to produce complex cross-sectional shapes such as tubes, rods, and rails. During the process, the material is heated to a suitable temperature and then forced through the die by applying pressure. Extrusion is commonly used in the production of aluminum and other metal products.

Forging:

Forging is a bulk deformation process that involves the shaping of metal by applying pressure to it. The process can be performed using a hammer or a press, and it can be carried out at room temperature or at high temperatures. Forging is commonly used in the production of automotive and aerospace components, such as engine parts, landing gear, and turbine blades.

Rolling:

Rolling is a bulk deformation process that involves the reduction of the thickness of a material by passing it through a set of rollers. The process is commonly used in the production of metal sheets, plates, and foils. During the process, the material is fed through the rollers and the distance between the rollers is gradually reduced, causing the material to become thinner. Rolling is commonly used in the production of steel, aluminum, and other metals.

Here you can learn more about bulk deformation

https://brainly.com/question/29839374#

#SPJ11

how can you tell by looking in the mirror that humans are closer genetically to old world monkeys and apes (catarrhini) than they are to new world primates (platyrrhini)?

Answers

The position of the nostril—the direction in which it opens—indicates that humans are closer to ancient monkeys and apes than to new-world primates.

The main difference between old-world monkeys, apes, and new-world primates is that old-world monkeys have noses and nostrils that face downward (catarrhine), whereas new-world primates have noses that face sideways and are flat.

Because humans have a nose that faces down, we can tell from looking in the mirror that they are more like old-world monkeys and apes.

Know more about primates here: https://brainly.com/question/30144622

#SPJ4

A stroke is one way that the brain can become damaged. The image above shows the
events that lead to the two types of strokes.
An ischemic stroke occurs because of an obstruction in a blood vessel supplying
blood to an area of the brain. The obstruction is the result of fatty deposits, a
condition called atherosclerosis. In an ischemic stroke, a blood clot has developed at
the clogged point or a blood clot that formed elsewhere is unable to pass through
the obstructed area. About 85% of all strokes are ischemic strokes.

A hemorrhagic stroke happens when an weakened vessel in the brain ruptures,
causing blood to leak into the surrounding brain tissue. The blood accumulates and
compresses the brain tissue.

In the picture above, which stroke seems to have affected the greatest amount of
brain tissue?

A.both seem to affect the same amount of tissue
B.ischemic
C.hemorrhagic

Answers

Hemorrhagic stroke seems to have affected the greatest amount of brain tissue.

What is hemorrhagic stroke?

A hemorrhagic stroke, which can be fatal, is caused when a blood artery in the brain bursts and starts to haemorrhage. Your brain's regular blood flow may be hampered, depriving some regions of oxygen. Blood buildup also exerts pressure on nearby brain regions, causing harm or even death.

When you have a hemorrhagic stroke, your brain or the area around it bleeds heavily. There is only so much room for the bleeding to go because this is taking place inside of your skull. That damages the surrounding brain tissue by applying too much pressure to it. The pressure will destroy those brain cells if it is too high or remains high for an extended period of time, harming the brain permanently.

Hence the correct answer is hemorrhagic stroke

To learn more about hemorrhagic stroke from the given link

https://brainly.com/question/27936989

#SPJ1

which blood vessels become progressively smaller and branch as they extend away from the heart?

Answers

Larger arteries like the pulmonary artery or the dorsal aorta feed into increasingly smaller diameter arteries, arterioles, and capillaries as the arterial system transports blood away from the heart.

In humans and the majority of other animals, an artery (plural arteries) (from Greek (artr) 'windpipe, artery') is a blood channel that transports blood from the heart to one or more areas of the body (tissues, lungs, brain etc.).

The umbilical and pulmonary arteries, which transport deoxygenated blood to the organs that oxygenate it, are the two exceptions to the rule that most arteries deliver oxygenated blood (lungs and placenta, respectively). The extracellular fluid that fills the arterial system is the effective arterial blood volume.

Learn more about artery

https://brainly.com/question/30647579

#SPJ4

what does a positive result for the endospore stain indicate about the organism?

Answers

A positive result for the endospore stain indicates that the organism has the ability to form endospores. Endospores are highly resistant, dormant structures that some bacterial species can form under certain environmental conditions, such as nutrient limitation or exposure to extreme temperatures, chemicals or radiation. Endospores have a distinct structure and are highly resistant to many environmental stresses, including heat, desiccation, and disinfectants. Endospore formation is an adaptive survival strategy that allows certain bacterial species to withstand unfavorable conditions until the environment becomes more favorable for growth and reproduction again. Therefore, a positive endospore stain suggests that the organism has the potential to survive harsh conditions by forming endospores.

7. Plan an Investigation What time of day
would be best for kite surfing off a coastal
beach? Explain your hypothesis, then describe
how you would gather data to support it.

Answers

Answer:

Please read below:

Explanation:

Hypothesis: The best time of day for kite surfing off a coastal beach would be in the late afternoon, around 3 pm to 5 pm, when the wind speed and direction are typically at their most favorable.

Data Gathering:

To gather data and test our hypothesis, we would need to collect information on wind speed and direction at different times of day over a period of time, as well as observe the ocean conditions during these times. Here is a potential plan for collecting the data:

Conduct research on the typical wind patterns and conditions for the specific coastal beach we will be investigating. This could involve reviewing weather records and speaking with local experts or experienced kite surfers.

Set up a data collection system to measure wind speed and direction. This could involve using an anemometer or wind meter, and placing it at a consistent location on the beach to measure the wind speed and direction at regular intervals throughout the day.

Conduct observations of ocean conditions at the same time as the wind measurements. This could involve looking for any visible signs of waves, swell, or other conditions that may impact kite surfing.

Collect data at various times of the day, including early morning, midday, and late afternoon. We may also want to collect data on a range of different weather conditions, such as sunny vs cloudy days, to get a more comprehensive understanding of the best time of day for kite surfing.

Analyze the data collected and look for patterns in wind speed, direction, and ocean conditions during each time of day. We may also want to compare the data collected to our initial research and see if it supports our hypothesis.

Use the data and analysis to make a conclusion about the best time of day for kite surfing off the coastal beach, and share our findings with the kite surfing community.

Overall, by collecting and analyzing data on wind speed and direction, as well as observing ocean conditions, we can determine the best time of day for kite surfing off a coastal beach and share this information with the kite surfing community.

when you infected bacteria simultaneously with both wt phage and any one of the mutants, only small plaques are formed. what does this result suggest?

Answers

This result suggests that the phage mutant and the wild-type (WT) phage are in competition for the same bacterial host cells.

When both phages are present, they compete for the same host cells, leading to the formation of smaller plaques, which indicate a lower number of bacterial lysis events compared to when only the WT phage is present. This is because the presence of the mutant phage reduces the efficiency of the WT phage in infecting and lysing bacteria, and vice versa.

Small plaque formation in this scenario is a result of reduced efficiency of either the mutant phage or the WT phage in infecting and lysing bacteria, leading to a reduction in the number of phage particles produced and hence the size of the plaque.

The result is an example of the phenomenon of phage interference, where the presence of two or more phages can affect each other's ability to infect and lyse bacteria, leading to reduced efficiency of one or both phages. This phenomenon can have important implications for the use of phages as a tool for biocontrol and for the evolution of phages and their interactions with bacterial hosts

To know more about mutants click here:

brainly.com/question/28296830

#SPJ4

Which traits go into box 6 and 7?

Answers

Answer:

Explanation:

I'm sorry, but I am not sure which context you are referring to or which traits you are referring to for boxes 6 and 7. Could you please provide more information or context so I can better understand your question and provide a helpful answer?

What are the functions of tube feet in a starfish?

Answers

Answer:

Tube feet in echinoderms have a few functions. The obvious one is locomotion. The feet are powered by the water vascular system. They are also important for absorbing oxygen (remember that the body of sea stars and their relatives are covered in bony plates called ossicles), for eliminating nitrogenous waste products of metabolism, and grasping prey. Sea stars are capable of pulling a bivalve apart by exerting pull on the two shells and essentially tiring the prey out as the muscles the prey eventually tire. Once there is an opening, the sea star everts its stomach into the prey.

If you've ever picked up a sea star and turned it over, you probably noticed the hundreds of tube "feet" lining its arms. It is these suction-bottomed tubes that the sea star uses to move about. It draws in water and channels it to canals that run throughout its body, usually ending in the tube feet.

Tube feet function in locomotion, feeding, and respiration. The tube feet in a starfish are arranged in grooves along the arms. They operate through hydraulic pressure. They are used to pass food to the oral mouth at the center, and can attach to surfaces.

Have a wonderful day! :-)

membrane proteins function as group of answer choices pores. all of these. selective channels. receptors. previousnext

Answers

Membrane proteins function as b. All of these

The cell membrane is the outermost layer of the cell that limits the environment inside the cell to the outside environment. The cell membrane is also useful as a barrier to organelles in cells and fluids that limit cells. The cell membrane is composed of protein and two layers of lipids called the phospholipid bilayer, which is where the proteins are spread between the two layers.

Membrane proteins are proteins that are permanently bound and give shape to cells. The function of membrane proteins is to facilitate the movement of substances in and out of cells, therefore membrane proteins act as selectively permeable channels. In addition, membrane proteins also act as pores through which only water molecules can pass and also function as receptors to receive or send important signals in the body. Because membrane proteins function as b. these are receptors, pores, and selective channels.

Learn more selectively permeable at:

https://brainly.com/question/15231037

#SPJ4

the movement of oxygen into a cell until equilibrium is reached without the use of atp is an example of:

Answers

The movement of oxygen into a cell until equilibrium is reached without the use of ATP is an example of passive transport.

What is cell?

In biology, the smallest unit that can exist on its own and is made up of all living creatures and bodily tissues. A cell is made up of three major components: the cell membrane, the nucleus, and the cytoplasm. The cell membrane surrounds the cell and regulates the molecules that enter and exit the cell. "A cell is described as the smallest, most fundamental element of life, responsible for all of life's operations." All living things have cells that serve as structural, functional, and biological units. A cell may duplicate itself on its own. As a result, they are referred to as the building blocks of life.

Here,

In the case of oxygen moving into a cell, it is likely that the oxygen is diffusing from an area of high concentration outside the cell to an area of lower concentration inside the cell.

This process continues until the concentration of oxygen inside and outside the cell reaches a state of equilibrium, at which point no further movement of oxygen occurs.

To know more about cell,

https://brainly.com/question/19138651

#SPJ4



Write down the mRNA sequence for:

a. Met-ser-leu-gly-trp-stop

met

ser

leu

gly

trp

stop

Answers

For Met-ser-leu-gly-trp-stop, mRNA sequence is -AUG-Methionine-Gutamine-Dropmo-GPA.

mRNA sequence or messenger RNA is a single stranded RNA molecule. It is corresponding to the DNA and conveys hereditary data present in the DNA. Framing proteins is deciphered. The hereditary codes (trio) present on mRNA get meant amino acids, leading to the practical result of a quality (proteins).

In eukaryotes, mRNA is combined in the core and in the wake of handling, it gets shipped to the cytoplasm, where interpretation or protein union happens. mRNA sequence gives various benefits over quality articulation exhibits in examining the transcriptome.

Offers a more extensive unique reach, empowering more delicate and exact estimation of crease changes in quality articulationCatches both known and novel highlightsCan be applied across many species

To know more about mRNA sequence, visit here:

https://brainly.com/question/26856800

#SPJ4

(Complete question) is:

Write down the mRNA sequence for:

Met-ser-leu-gly-trp-stop

the theory that says weight is maintained through internal regulatory controls making it difficult to lose weight is called the . multiple choice question. behavior modification theory metabolic weight loss theory set-point theory low-fat and low carbohydrate weight loss

Answers

The theory that says weight is maintained through internal regulatory controls making it difficult to lose weight is called the c)set-point theory.So,correct option is c.

Set point theory, in accordance with human body weight, expresses that there is a natural control technique in people that effectively manages weight towards a foreordained set load for each individual. This might happen through guideline of energy consumption (e.g.via expanded or diminished hunger) or energy use (for example by means of diminished digestion or sensations of lethargy).

Set point theory clears up why it is hard for health food nuts for keep up with weight reduction over the long run, as calorie limitation might turn out to be less viable or more challenging to keep up with as administrative systems in the body effectively push the body back towards the set point weight.

Set point theory separates between dynamic pay and uninvolved remuneration. In dynamic pay, an administrative component in the body influences energy consumption or admission. In latent remuneration, a reduction in muscle to fat ratio levels prompts a diminishing in energy pay even without an administrative component as there is less weight to be conveyed. Set point theory places dynamic pay likewise toward inactive compensation.

Hence,correct option is c.

To know more about set-point theory,visit here:

https://brainly.com/question/6647731

#SPJ4

(Complete question) is:

the theory that says weight is maintained through internal regulatory controls making it difficult to lose weight is called the . multiple choice question.

a)behavior modification theory

b)metabolic weight loss theory

c)set-point theory low-fat and

d)low carbohydrate weight loss

a mutant bacterial cell has a defective aminoacyl-trna synthetase that attaches a lysine to trnas with the anticodon aaa instead of the normal phenylalanine. what would be a potential consequence for a cell in which this happens? remember that phenylalanine may be encoded by multiple codons.

Answers

A mutant bacterial cell has a defective aminoacyl-tRNA synthetase that attaches a lysine to tRNA with the anticodon aaa instead of the normal phenylalanine. The potential consequence for a cell is that proteins in the cell will include lysine instead of phenylalanine at amino acid positions specified by the codon UUU.

Bacterial mutants typically have either lost a growth trait (such as the inability to utilize a specific carbon or nitrogen source or the inability to develop without a specific nutrient) or acquired a new growth property (e.g., the ability to grow in the presence of some toxic substance).

The phenotypes of the mutants that correspond to each gene can be used to classify the genes into one of two categories: nonessential genes produce products that are only necessary under certain growth conditions, whereas essential genes produce products that are necessary under all growth conditions.

Want to know more about mutant bacteria visit the link which is given below;

https://brainly.com/question/9456653

#SPJ4

Construct a scientific explanation about how glucose is used in a tree to help it grow. Focus on answering the question: How do the internal structures of the tree function together to help a tree take in and lock up carbon atoms from carbon dioxide in the wood of the tree as it grows? Make sure to cite the relevant evidence from this lesson (and others as needed) and the way this connects to how the structures inside the tree work together to help the tree lock up carbon atoms (originally taken in as CO2 from the air) within the wood of the tree

Answers

The internal structures of a tree work together to take in carbon dioxide (CO2) from the air and convert it into glucose through the process of photosynthesis.

During photosynthesis, the chloroplasts in the mesophyll cells of the leaves use energy from sunlight to convert CO2 and water into glucose, releasing oxygen as a byproduct.

The glucose produced during photosynthesis is used by the tree as a source of energy and as a building block for the formation of cellulose, hemicellulose, and lignin, the main components of the cell walls in the tree's trunk, branches, and leaves.

The glucose is transported from the mesophyll cells of the leaves to the other parts of the tree through the phloem, a tissue that functions as a network of tubes for the transport of sugars and other nutrients from the leaves to the rest of the tree.

The cellulose, hemicellulose, and lignin produced by the tree help to reinforce the cell walls, giving the tree its structural integrity. As the tree continues to grow, more glucose is produced and used to build the cell walls, and the tree is able to lock up more and more carbon atoms within its wood.

To learn more about photosynthesis

https://brainly.com/question/29775046

#SPJ4

when centrifuging biohazards, what is the recommended "wait time" before opening the centrifuge to allow aerosols to settle in the event of a spill or leak from a primary tube?

Answers

when centrifuging biohazards, 3-5 mins the recommended "wait time" before opening the centrifuge to allow aerosols to settle in the event of a spill or leak from a primary tube.

What is aerosols ?

Like oven cleaner or air freshener, an aerosol is a material that is dispersed as a very fine mist. A gas-suspended aerosol is made up of microscopic liquid or solid particles. When a button is pressed, a hissing jet of spray paint is emitted from the aerosol can.

What is biohazards ?

Bacteria, viruses, parasites, and molds or fungi all pose a risk to one's health due to their biological makeup. When these substances are consumed, inhaled, or come into touch with the skin, they can be harmful to human health. Illnesses from parasites, tetanus, respiratory infections, and food poisoning are just a few of the diseases they can spread.

Therefore, when centrifuging biohazards, 3-5 mins the recommended "wait time" before opening the centrifuge to allow aerosols to settle in the event of a spill or leak from a primary tube.

Learn more about aerosols from the given link.

https://brainly.com/question/12656218

#SPJ1

What is binomial nomenclature?

Answers

In the binomial nomenclature method for naming plants and animals, each species is assigned a name made up of two terms, the first of which identifies the genus as well as the second of which identifies the species.

Explain about the binomial nomenclature?

Binomial nomenclature must be used to standardise for naming of living things.

All living things should have distinctive names so that everyone can recognise them. A description of an organism should make it possible for individuals (or even the scientific community) to come up with the same exact name.The common names for species are not exclusive like their scientific ones. Consequently, utilising common names can raise questions and misunderstandings regarding the animal or plant being described and its relationships with other animals and plants.Because it enables individuals from around the world to clearly communicate about various plant and animal species, binomial nomenclature is important. Additionally, it guarantees that every scientific name is unique.

To know more about the binomial nomenclature, here

https://brainly.com/question/9837065

#SPJ1

at rest, veins contain the largest percentage of blood in the body. True/False

Answers

Answer:

it's true

Because the walls of the veins are thinner and less rigid than arteries, veins can hold more blood. Almost 70 per cent of the total blood volume is in the veins at any given time.

What is the economic importance of bacteria ?

Answers


Due to the numerous uses for which they are used, bacteria are economically highly valuable to people. Baking products like cheese, fudge, vinegar, and yoghurt, for instance, all include bacteria. These are merely some of the items that use bacteria. Additionally, bacteria play a significant role in agriculture by assisting in the creation of various fertilisers and compost. Bacteria are also widely used in genetic engineering and modification.

Major Economic importance of Bacteria:

1. Biotechnology - In the realm of biotechnology, microorganisms are also quite important. For the production of compounds including organic acids, ethanol, enzymes, acetone, and various types of perfumes, bacteria have been used in a variety of service industries. Numerous pharmaceuticals and nutritional supplements are produced using bacteria.

2.PestControl:Bacteria may be used in biological pest management in place of pesticides. The gram-positive, soil dwelling bacteria Bacillus thuringiensis (Bt) is frequently employed. This bacterium is used as a pesticide specifically for Lepidopterans under the trade names Dipel and Thuricide.

3.Medicines:The manufacturing of antibiotics, including streptomycin, amoxicillin, and other drugs, is heavily reliant on bacteria, even in the medical industry. In addition, microbes are beneficial in the creation of vaccinations against a number of diseases.

Hope it helps!

what might cause a gram positive organism to be pink/red as opposed to the purple it should be? what should you do next?

Answers

A thinner peptidoglycan layer might cause the gram positive organism to be pink/red as opposed to the purple like they normally should be.

Gram positive bacteria are basically surrounded by a single thick peptidoglycan cell wall whereas the gram negative bacteria possess a much thinner peptidoglycan cell wall but also these bacteria have an outer membrane which contain lipopolysaccharides that surround the cell.

A Gram stain is basically colored purple. When the stain happens to combine with the bacteria in a particular sample, the bacteria will either stay purple or they will turn to pink or red. If the bacteria happen to stay purple, then they are Gram-positive and if the bacteria turn pink or red, then they are Gram-negative. If the gram positive bacteria turn pink or red in color instead of purple, it means they have a thinner peptidoglycan layer maybe because of mutation or contamination.

To know more about gram stain here

https://brainly.com/question/28727157

#SPJ4

I need help with living environment for genetics unit I’m not sure why the answer for plant A species and plant B species is the answer I don’t know how the teacher got that answer

Answers

A triplet codon is a DNA or RNA molecule that codes for a specific amino acid through a series of three subsequent nucleotides. Some codons act as start or stop signals for translation.

The triplet code, made up of three nucleotides, identifies a single amino acid.

Here we can see ‘UUG’ codes for LEU

‘GGU’ codes for ‘GLY’

‘UAU’ codes for TYR

What is triplet codon?

It is a particular sequence of three nucleotides that is used as a component of the genetic code to specify an amino acid for a particular protein or to start or stop protein synthesis.

A codon is a group of three nucleotides on a messenger ribonucleic acid (mRNA) that designates one of the 22 amino acids that are capable of forming proteins. The order in which these amino acids appear on the messenger RNA dictates the primary structure of the protein that will be produced.

To learn more about triplet codon from the given link

https://brainly.com/question/12192675

#SPJ1

Other Questions
3. given any two real numbers, there is a real number in between. a. given any two real numbers a and b, there is a real number c such that c is . b. for any two , such that a < c < b A rectangle has an area of 24 square inches. The rectangle is reduced by a scale factor of 1/2. What is the area of the new triangle? you are called to the scene of an overturned tanker truck. arriving at the scene, you notice a fluid draining from the underside of the truck. you use your binoculars to look on the placard on the back of the vehicle so that you can identify the material from your: how did the brics countries earn their title? multiple choice question. they were seen as promising markets for finance capital. they were known for antidumping measures. they were thought to be the best locations for manufacturing. they all have access to naval ports. Write an article discussing Prince Williams and Kate Middletons wedding.Either supporting, opposing or (agreeing with both) the event Draw the image of the following segment after a dilation centered at the origin with a scale factor of 2. What message is Harper Lee trying to communicate in To Kill a Mockingbird? The main themes in To Kill a Mockingbird are related to social inequality. See if you can identify and analyze those themesStep 1: What parts of the plot seem related to a possible theme in the novel? (Think about the main conflict and how it get resolved or worked out.)Step 2: Which characters seem related to a possible theme? Which characters change, and what do those changes suggest about finding ones own voice and personal growth?Step 3: How does Harper Lee use symbols to hint at the novels themes? What objects, people, or places stand for something bigger in the story?Step 4: What does the novels title suggest about the novels theme? Why do you think Lee named her novel To Kill a Mockingbird? Step 5: Write one or two of the novels main themes in your own words People are forced to leave their country as a results of political conflict and war are describe as? how much diphosphorus pentoxide results if 3.25 moles of phosphorus are combined with sufficient oxygen to complete the reaction? an aqueous solution of licl is 34.0 % licl. what mass of water is present in 250.0 g of the solution? fill in the blankwhen you use the keyboard arrow keys, pgup, or pgdn keys to scroll to a different position in the document, the ____ automatically moves when you press the desired keys. based on ibn battuta's description of the sultan of sumatra in the first paragraph, his point of view could most likely be characterized as that of a cheryl wants to find out if stretching before exercise causes people to have less injury during exercise. the best way to answer this question would be to use . Which ics structure enables different jurisdictions to jointly manage? THREE QUESTIONS 21POINTS HELP!!!8. Six boys have heights of 1.53 m, 1.49 m, 1-60 m, 1.65 m, 1.90 m and 1.43 m. (a) Find the mean height of the six boys. (b) Find the mean height of the remaining five boys when the shortest boy leaves.9. In a maths test the marks for the boys were 9, 7, 8, 7, 5 and the marks for the girls were 6, 3, 9, 8, 2, 2. (a) Find the mean mark for the boys. (b) Find the mean mark for the girls. (c) Find the mean mark for the whole class. 10. Five different drinks have an average (mean) price of 1.50. When a sixth drink is added the new average price is 1.60. How much did the sixth drink cost? managers should focus their attention on interrelationships among value-chain activities within the firm, not on relationships among activities within the firm and other organizations (such as suppliers and customers). group of answer choices false true at first, rowlandson is filled, understandably, with great anger, hatred, and fear of her indian masters. does rowlandson change her views of natives by the end of her story? if so, how? I want to tell you what has been done in the last few days, and why it was done, and what the next steps are going to be. . . . This bank holiday, while resulting in many cases in great inconvenience, is affording us the opportunity to supply the currency necessary to meet the situation. . . . I can assure you, my friends, that it is safer to keep your money in a reopened bank than it is to keep it under the mattress. The success of our whole national program depends, of course, on the cooperation of the publicon its intelligent support and its use of a reliable system. President Franklin D. Roosevelt, March 12, 1933A. to reassure the American public B. to discourage people from using banks C. to explain one of the reasons for creating a bank holiday D. to encourage citizens to remove their money from banks E. to convince the public to support the governments actions what economic strategies did different empires adopt, and what were the causes and effects of those strategies? Each month, a shopkeeper spends 7x+19 dollars on rent and electricity. If she spends 2x7 dollars on rent, how much does she spend on electricity? Use pencil and paper. For which value(s) of x is the amount the shopkeeper spends on electricity less than $100? Explain how you found the value(s).